How can I view on external NTSC monitor in PRCS6?

NOTE: I've aksed this quesion before on this forum and followed the kind suggestions given, however, I have not yet been successful. Note that I can view my timeline on my external broadcast monitor just fine in FCP .. anyone??

Hi Steven,
Thanks for jumping in.
I cannot find "Enable Transmit" anywhere under any menu ... just for clarity, I have CS6, not PRCC.
As a side note - not sure why this should be an issue at all, and why it is not readily explained by Adobe ... there does not seem to be any aswers anywhere from Adobe, or online also for that matter. Seriousely, anyone who's an editor is going to want to view their work in an extenral NTSC monitor, and not on the computer display ...
Many thanks

Similar Messages

As a baseball coach how can I view Ubersense on a monitor?

How do I view Ubersense on a monitor from my iPad?

Hi, I'm not sure of what you mean by monitor - your computer monitor, a monitor at a facility, a projector screen, etc. There are different solutions for each of these. So see if this link below helps. Also note, that you'd want to have the ubersense videos in your camera rollon your ipad (Ubersense site might help you with that.) Also, if you decide on the Apple tv option, it's small, wireless and very portable.
http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
Hope this helps.

How can I view an external monitor in FCP (Lion)?

What setting in FCPX allows the output to go to an external HDMI monitor? I can see the desktop on my monitor but I need to know how to view the timeline from FCPX.
Any help would be GREATLY appreciated!
Thanks in advance!

Window>Show Viewer on the Main (or Secondary) Display.

Viewing on external NTSC monitor

Here is my setup, I have a Dual 2.7 GHz G5 with a X800XT 256 MB video card with ADC and DVI outs. I had an older card in there with 2 DVI's connectors and one of them had a DVI to Video Adapter to the NTSC and all was fine.
When I got the new video card I had to plug the LCD into the DVI connector and I installed an older ATI Radeon PCI card to runt he NTSC monitor. Not sure what model the the older card is but it does have an svideo out and DVI out. I have tried with the NTSC monitor plugged into the DVI connector with the DVI to Video adapter and plugged directly into the svideo out. Plugged into the DVI and adaptor the video is distorted and unusable plugged in directly to the Svideo port the video works fine but I can't get Final Cut or anything else to recognize it as the NTSC video out device.
My thought is that either the PCI card I have is too old for the Apps to recognize it, or that the Apps with only work with the primary AGP graphics Card.
Has anyone else had this problem? and is there an easy solution?
I have a ADC to DVI adaptor on order to give my new video card dual DVI outputs hopping that will fix the issue.
thanks
Ken

Easy solution...don't do this. Route the signal thru your deck or camera:
#8 External Monitor Viewing.
Shane's Stock Answer #8:
A simple path is mac > firewire > camera or deck > rca cables > tv
Then start up your camera and tv, then open fcp.
Then go View > External video > all frames
Video playback should be Apple firewire NTSC (If you are using an NTSC set)
Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
Shane

How Can I Connect 2 External Display Monitors to a MacBook Pro? Help

I want to know if I can (and How to) connect 2 external display monitors to a MacBook Pro... late 2006 & the new Unibody MBP.
I'll appreciate

Requires additional hardware - the Matrox DualHead2Go. For the late 2006, you'd need the DualHead2Go Digital Edition, and for the unibody you'd need the DualHead2Go DP Edition, with appropriate cabling (and a DVI-to-VGA adapter for the late 2006 MBP).
http://www.matrox.com/graphics/en/products/gxm/dh2go/

Can I use a Dell W3706MC 37" LCD HDTV as an external NTSC Monitor?

Hello,
I was considering buying this dell TV as a second monitor for my studio as i mostly do audio post production and score music (this size monitor would be excellent for working on scores in my case) on a full time basis but I am expanding into film editing as well.
My question is can i use this as an external NTSC monitor for FCP 4.5HD and version 5? Any help would greatly be appriciated. You can view the tech specs of this TV at http://www1.ca.dell.com/content/products/productdetails.aspx/lcd_w3706mc?c=ca&cs =CADHS1&l=en&s=dhs
Best Regards,
Leon Thomas
MSD Studios
Power PC G5 Mac OS X (10.3.9) 1.8 GHz, 1.5Gigs Ram, 160 Gigs Internal HD

While it might be fine for corporate video or other non-broadcast work, it won't be appropriate for broadcast work. For that you need to buy a broadcast monitor.
The reason is that if you take 20 TVs of various models, and put them side by side (say you went to Circuit City or Best Buy), you wouldn't see the same image twice. They all would be slightly different. Even if you calibrated them, they might all look slightly different. But put 20 broadcast monitors side by side, all calibrated, and you will see exactly the same image and color representation.
Shane

Problems viewin external ntsc monitor

I can only view the external monitor when I use the print to video function. When I'm editing there is no video showing on the external monitor. The video out is set to Apple Fire wire NTSC. I am using the ADVC-100 as the conduit to the monitor. I have tried both DV-NTSC and DV-NTSC- Firewire Basic in Easy Setup.
Please help
Thank you

Make sure you have the setting correct on the box. It should be recognized any time it is connected. Trash your preferences and set it up correctly. Use the DV Converter setting, none other.

How do I view an external display with my macbook pro closed?

How do I view an external display with my macbook pro closed? I am using a wireless keyboard and trackpad, and I would like to use a larger (Dell) monitor with my Macbook Pro closed.

Here are the rules for Clamshell mode:
http://support.apple.com/kb/HT3131

External NTSC Monitor - 4:3 and 16:9 Question

I'm trying to find a configuration setting in FCP 5.0 when outputting to an external NTSC monitor that will force the image to "letterbox", rather than crop to 4:3.
I have a nice Sony NTSC monitor, but it's not the model that allows switching between 4:3 and 16:9 aspect ratios, unfortunately.
I don't want to have to replace this monitor at this time.
I see in the latest version of After Effects I can force the image to "letterbox" in the external monitor. I tested it, and it works perfectly.
Ironically, PhotoShop CS3 does NOT allow you to letterbox your preview to an external monitor. A widescreen formatted file appears cropped in my monitor.
So, my question is can I do this in FCP 5.0? Why am I stuck with a cropped image from a 720x480 aspect ratio? Is there a setting somewhere that will force the preview to letterbox on my monitor?
On a similar note, what will we use to replace NTSC monitors if you're shooting and editing HD?
Thanks so much.

FCP will not unsqueeze the image for you...you need a monitor that has this option.
what will we use to replace NTSC monitors if you're shooting and editing HD?
And HD monitor. But then you need some sort of HD capture card or output device (unless you are working with DVCPRO HD)...even HDV. And then you will need an HD monitor. The cheapest solution might be the Decklink Intensity and small HDTV...the intensity has HDMI out. But this only works if you have a MacPro. The MATROX MXO is next, and it connects via DVI. It can output a signal to an HDTV (component), or to an Apple Cinema Display or Dell 24" Display. That gets you broadcast quality on a computer monitor...believe it, or not!
http://library.creativecow.net/articles/ross_shane/MXO.php
Shane

HT4847 On startup my macbookair says start up disk full/delete some files. When I look at storage disk utility I see 51GB of a possible 60GB is used with Other. What is Other? and how can I view and delete some of these files?

On startup my macbookair says start up disk full/delete some files. When I look at storage disk utility I see 51GB of a possible 60GB is used with Other. What is Other? and how can I view and delete some of these files?

A MacBook will use Time Machine to make local backups so that when connected to an external drive it will backup a lot faster.
to disable this, you must use a command under terminal.
to locate terminal, do a search for it under spotlight (the magnifying glass on the top right corner), should be the first hit.
once under terminal, type the following text exactly:
sudo tmutil disablelocal
hit enter.
you will be asked to input your password, if you do not have a password, you will have to create one before performing this command. after entering your password, hit enter again and close terminal.
in a few minutes the space taken up by time machine should be cleared.

How can i view the Streams process through 10g OEM

I have successfully configured OEM on Oracle 10.1.0.3
My question is:
How can i view the Streams processes and queues so that i could monitor its functionality.
In 9i Java Console OEM I was able to monitor Streams using the <Distributed> tab but I don't find any such option in 10g. Please help.
Thanks in Advance.
Regards,
Raj

There's a message on the Database Administration page of EM10g.
"TIP Use the Enterprise Manager 10g Java Console to manage Streams, Advanced Replication, Advanced Queues, XML Database, Spatial and Workspace."
At present there is no way through the EM10g Web Interface, and I understand the Java version which comes with 10g doesn't contain any 10g new features.
So I am still using OEM 9.2 in addition to EM10g
Thanks,
Alan...

What are cpl files and how can I view them in my computer?

I transfered files directly from my sony camera to my external hard drive and all my videos are in .cpl, how can I view these in my computer?

jonathan234 wrote:
.. . how can I view this in my imovie?...
you ceated an archive - that doesn't mean, you imported them in iM, which is not only for editing, but for achiving too. nor into the iLife suite of apps, esp. iTunes, which is the 'media centre' on MacOS.
choose Import from Archive. in a preview window you see each 'take'. choose All or select which to import. on import, iM will create so-called Events=groups of clips defined by day of recording.
After import, iM allows to preview each clip or Event, edit them in Projects, share them to iTunes for playback on your Mac, iPad, iPod, AppleTV, YouTube, VImeo .........
don't hesitate to watch the tutorials
http://help.apple.com/helplibrary/#video
to grasp the 'idea' of iLife, the iApps, iMovie ..
http://help.apple.com/imovie/

HT201272 I purchase movie, when I try to view it has error massage this requested ULR not found on server. What does this mean and how can I view this movie?

I purchase a movie on iTunes, when I tried to view I get error massage, requested ULR is not found on server. What does this mean and how can I view this movie.

familyfromapo wrote:
The movies are Dexter that we purchased at a store. He uses the Air and since it does not have the disk option this is how we were hoping he could view his shows. We had no idea we would be breaking the law....just wanted to put all of the movies we have purchased on the external solely for the intent of our viewing.
Thank you for your time and help.
Sorry.
It is illegal to break the encryption to copy a dvd.
Judge: DVD-copying software is illegal - CNET News
Judge Rules DVD-Copying Software Is Illegal | Threat Level | Wired ...
MPAA Says Making Even "One Copy" of a DVD is Illegal

How can I view as "single page continuous" in full screen mode?

how can I view as "single page continuous" in full screen mode?
preferences->page display:
preference->accessbility:

Not possible.

How can I view the USMT recovery key in SQL report

Hello all,
Can anyone help me to provide sql query for below link… What I am looking is Just to create a report with all computers that has computer association any type with the recovery key information.
http://www.windows-noob.com/forums/index.php?/topic/1763-how-can-i-view-the-usmt-recovery-key/
I have tried below but not working so looking for help…..
SELECT TOP (100) PERCENT dbo.v_StateMigration.SourceName, dbo.v_StateMigration.SiteCode, dbo.v_StateMigration.SMPServerName,
dbo.v_StateMigration.SourceMACAddresses, dbo.v_StateMigration.RestoreMACAddresses, dbo.StateMigration.StateEncryptDecryptKey,
dbo.StateMigration.StorePath, dbo.StateMigration.StoreSize
FROM dbo.StateMigration INNER JOIN
dbo.v_StateMigration ON dbo.StateMigration.SMPServerName = dbo.v_StateMigration.SMPServerName CROSS JOIN
dbo.v_UserStateMigration
WHERE (dbo.StateMigration.StorePath IS NOT NULL) AND (dbo.StateMigration.StoreSize IS NOT NULL)
ORDER BY dbo.v_StateMigration.SourceName

Try this.
SELECT Distinct
SM.SourceName,
SM.SiteCode,
SM.SMPServerName,
SM.SourceMACAddresses,
SM.RestoreMACAddresses,
SMT.StateEncryptDecryptKey,
SM.StorePath,
SM.StoreSize
FROM
dbo.v_StateMigration SM
JOIN dbo.v_UserStateMigration UM on SM.RestoreClientResourceID= UM.RestoreClientResourceID
join dbo.StateMigration SMT on SM.SMPServerName = SMT.SMPServerName
WHERE
(SM.StorePath IS NOT NULL)
AND (SM.StoreSize IS NOT NULL)
ORDER BY
SM.SourceName
http://www.enhansoft.com/

How can I view on external NTSC monitor in PRCS6?

Similar Messages

Maybe you are looking for