How can I view the devices using my cell number to receive texts?

My family has a lot of devices and they all use my apple ID which allows texts to go to all the devices because its registered in my apple id. I think my texts are going to other devices but i dont know which ones. Is there a way to see this without having the device just so i can see a list that is using my cell phone number.
I know how to turn it off but when i do it want to make sure its all of the devices that are turned off from my texts. Also is there any way to make sure that only my phone gets the texts?

Hello nonyabeezwax,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning iMessage issues. You may want to consider signing out of iMessage on those additional devices:
iOS: Deactivating iMessage
http://support.apple.com/kb/ts5185
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Similar Messages

HT4759 How can I know the Devices using my i Cloud or Apple ID?

How can I know the Devices using my i Cloud or Apple ID?

This information is not available. If you have any misgivings, change your password at http://appleid.apple.com - it should be at least 8 characters - 12 would be better - of which one must be a capital letter and one a numeral. No punctuations signs, and no real words.

How can I view the underlying URL to a hypertext link in text from galley or story mode?

How can I view the underlying URL to a hypertext link in text from galley or story mode?

click inside the hyperlink and open Window > Hyperlinks (in InCopy). The link is highlighted there. If you can't see it in the editable field, double-click the highlighted entry and it'll open in a dialog box.
AM

HT3345 how can i view the formula in a cell

Hi I am new to Apple products etc & I have imported an Excel doc to Numbers & I dont seem to be able to view the formula in a cell.
Can anyone help?

View (menu) > Show Formulas List
OR
Press option-command-F
will show a list of all formulas and their locations.
Clicking any item in the list will select that cell, bring it into view, and show the formula in the entry bar above the working area of the window.
Regards,
Barry

How can I view the content within the message without having to double click on the message. I used to be able to see content of the message alongside it .

How can I view the content of the message without having to double click on it; I used to be able to see content of the message next to it .

Is this in Mail?
You can (I do all the time). The oreview window can be resized by dragging the message list window border - you might accidentally have closed it up

HT4623 I have tried resetting an iPhone 3 and I am unable to activate and sync it. How can I reset the device without using a computer?

I have tried resetting an iPhone 3 and I am unable to activate and sync it. How can I reset the device without using a computer?

Hello anacc,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Connect your USB cable to your computer but not to the iPhone, iPad, or iPod touch until step 3.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button down, connect the USB cable to the iPhone, iPad, or iPod touch. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen. When this screen appears, you can release the Home button:
Note: If the image of a battery appears, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again. If you don't see the Connect to iTunes screen, try these steps 1 through 4 again.
iTunes should automatically open and display the following message:
"iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."Note: If iTunes not open after two minutes, please open iTunes yourself.
Use iTunes to restore the device.
Best of luck,
Mario

Hi; I lost my iPhone4!!! How can i block the device so it can´t be used to see the important notes and contacts inside???

Hi; I lost my iPhone4!!! How can i block the device so it can´t be used to see the important notes and contacts inside???

You cannot unless you had find my iphone activated on the iphone before it was lost.
MobileMe: Find My iPhone overview

I have lost my phone IMEI Number 012546005322381, Serial Number 87******A4S, is there a way it can be tracked? Also, how can one remove the device from the itunes account

I have lost my phone IMEI Number 012546005322381, Serial Number 87******A4S, is there a way it can be tracked? Also, how can one remove the device from the itunes account
<Serial Number Edited By Host>

If you enabled Find my iPhone then you should use that. If not, I'm afraid you're out of luck for finding it.
To manage your devices, go to Your Account in iTunes.

How can I view the size of a particular event in iPhoto '11?

How can I view the size of a particular event in iPhoto '11? The 'Get Info' option is not displaying the size of the event like it used to in iPhoto 8.

But the event does not really have a size - you can export the photos and make the size pretty much what you want - while it is in iPhoto it is an event
I guess that iPhoto could report the size of the original photos as imported - or the size of the modified photos if exported as JPEGs - or the size of the modified photos if exported with a maximum dimension of 1080 - but the event simply is photos and does not have a "size" until you export it
Obviously you want to know the size but the question was
what is your puprose for knowing the size?
WIth that information maybe there is a way to get you what you want
But the basic answer is simply that an event does not have a size - an event is a collection of photos and each photo has either two or three versions in the iPhoto library and each photo can be exported for outside use in several formats and at any size
LN

How can i view the data from Access DB in oracle

pls tell me that how can i view the data of MS ACCESS DATABASE in ORACLE.i was use ODBC of ACCESS DATABASE AND THEN CREATE DATABASE LINK IN ORACLE BUT NOT YET SUCCEEDED.PLS TELL ME THE PROCEDURE.
regard's

hi,
u nedd to use Oracle Hetrogeneous Services,,
full details of the procedure u may fing on metalink
Regards

How can I view the contents of a free trial for adobe fireworks cs6 on mac

how can I view the contents of a free trial for adobe fireworks cs6 on mac.
My friend told me to find the application in finder then hit control and click it and then it should give you the option to click
"view package contents"
This was not the case
please help thank you

When posting in Apple Communties/Forums/Message Boards.......It would help us to know which iMac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
CLICKY CLICK---> https://discussions.apple.com/docs/DOC-3602
CLICKY CLICK-----> Help us to help you on these forums

How can i view the variables of the session memory

Hi experts
How can i view the variables of the session memory.Such as I want display the variables of memory which id is 'BULRN' in ABAP debug.
In program i can use import from memory id visit the momery of session,but i don't know the name of variables which store in momery of my session.

Its not possible to view in the debug mode..
SAP memory is a memory area to which all main sessions within a SAPgui have access. You can use SAP memory either to pass data from one program to another within a session, or to pass data from one session to another. Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters). These parameters can be set either for a particular user or for a particular program using the SET PARAMETER statement. Other ABAP programs can then retrieve the set parameters using the GET PARAMETER statement. The most frequent use of SPA/GPA parameters is to fill input fields on screens
SAP global memory retains field value through out session.
set parameter id 'MAT' field v_matnr.
get parameter id 'MAT' field v_matnr.
They are stored in table TPARA.
ABAP memory is a memory area that all ABAP programs within the same internal session can access using the EXPORT and IMPORT statements. Data within this area remains intact during a whole sequence of program calls. To pass data
to a program which you are calling, the data needs to be placed in ABAP memory before the call is made. The internal session of the called program then replaces that of the calling program. The program called can then read from the ABAP memory. If control is then returned to the program which made the initial call, the same process operates in reverse.
ABAP memory is temporary and values are retained in same LUW.
export itab to memory id 'TEST'.
import itab from memory Id 'TEST'.
Here itab should be declared of same type and length.

My ipad was stolen last night and how can i disable the device?

my Ipad was stolen last night and how can i disable the device?

Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
 Cheers, Tom

I recently got iphone 4 , yesterday i was trying to install an application from the itune store it say that i need to authorize it ( i already have an account and bought some apps ) how can i authorize the device ?

i recently got iphone 4 , yesterday i was trying to install an application from the itune store it say that i need to authorize it ( i already have an account and bought some apps ) and there was a CLICK HERE BUTTON , when i press on it it take me a to a page that require some kind of activation code or smthn like that ,
how can i authorize the device ?
and btw i bought it from UAE store
IOS 4.3.2

You should only make purchases for all your devices using a single Apple ID. There is no need, and indeed a good reason not to, set up a new Apple ID with each new device purchase. While items purchased under different IDs can be played on a single device, you cannot merge Apple IDs and it makes it cumbersome.
Apple IDs do not expire but may become dormant and require reactivation if they are not actively used.
You should make note of your Apple ID and passwords and keep a record of it. Like a bank account it contains access to items with value. Update your Apple ID email address as they change.
I see you were guided to this forum by a help page on recovering your password. If that is not sufficient try the links below. Apple will need to verify you are indeed to owner of the accounts to which you are trying to gain access.
http://www.apple.com/support/appleid/contact/
Contact Apple for help with Apple ID account security - http://support.apple.com/en-us/HT5699 "This article provides country-specific Apple Support contact information for customers seeking help with their Apple ID password or other security-related issues."
Frequently asked questions about Apple ID - http://support.apple.com/kb/HE37

How can I Improve the Performance using Global Temo Tables ??

Hi,
Can anyone tell me , How can i make use of Global Temporary Tables to improve the Performance.
I have few sample scripts ,
Say i have the View based on some Complex query like ,
CREATE OR REPLACE VIEW Profile_values_view AS
SELECT d.Profile_option_name, d.Profile_option_id, Profile_option_value,
u.User_name, Level_id, Level_code
FROM Profile_definitions d, Profile_values v, Profile_users u
WHERE d.Profile_option_id = v.Profile_option_id
AND ((Level_code = 'USER' AND Level_id = U.User_id) OR
(Level_code = 'DEPARTMENT' AND Level_id = U.Department_id) OR
(Level_code = 'SITE'))
AND NOT EXISTS (SELECT 1 FROM PROFILE_VALUES P
WHERE P.PROFILE_OPTION_ID = V.PROFILE_OPTION_ID
AND ((Level_code = 'USER' AND
level_id = u.User_id) OR
(Level_code = 'DEPARTMENT' AND
level_id = u.Department_id) OR
(Level_code = 'SITE'))
AND INSTR('USERDEPARTMENTSITE', v.Level_code) >
INSTR('USERDEPARTMENTSITE', p.Level_code));
Now i have created the Global temp Table as ,
CREATE GLOBAL TEMPORARY TABLE Profile_values_temp
Profile_option_name VARCHAR(60) NOT NULL,
Profile_option_id NUMBER(4) NOT NULL,
Profile_option_value VARCHAR2(20) NOT NULL,
Level_code VARCHAR2(10) ,
Level_id NUMBER(4) ,
CONSTRAINT Profile_values_temp_pk
PRIMARY KEY (Profile_option_id)
) ON COMMIT PRESERVE ROWS ORGANIZATION INDEX;
Now I am Inserting the Records into Temp table as
INSERT INTO Profile_values_temp
(Profile_option_name, Profile_option_id, Profile_option_value,
Level_code, Level_id)
SELECT Profile_option_name, Profile_option_id, Profile_option_value,
Level_code, Level_id
FROM Profile_values_view;
COMMIT;
Now what my doubt is, when do i need to execute the Insert Statement.
Say , if the View returns few millions of records , then loading such a data into Global Temporary table takes lot of time.
Then what is the use of Global Temporary tables and how can i improve the Performance using the same.
Raj

Thanks for the responce ,
There are 2 to 3 complex views in our database, and there always be more than 5000+ users will be workinf on the application and is OLTP application. Those complex views are killing the application performance.
I what i felt was, if i create the Global Temporary tables for thow views and will be able to load the one third million of records returned by the views in to cache and can improve the application performance.
I have created the Global Temporary tables for 2 views with the option On Commit Preserve , But after am inserting the records into the Temp table and when i Issue the commit statement, the Temp table is getting Cleared.
I really got surpised of this behaviour as i know that with the Option On Commit Preserve , the rows should retain in the Temp Table, Instead , it's getting cleared.
Pelase suggest , what to do ??
Raj

How can I view the devices using my cell number to receive texts?

Similar Messages

Maybe you are looking for