How can I view the timeline for a event

I'm a bit of a newbie in iMovie 10 and don't seem to be able to find a way to turn on a timeline display for a Project. In other words, if I want to start a clip at 11:54 and end it at 13:10, where can I see that information? Shouldn't there be a continuous display showing me where I am in a Project?
Many thanks for any help.

Hello BocaBoy
You should see the timeline in the middle of the window and it will be above the string of clips for your movie that you are currently making. For the events and the collection of clips, you will need to import them in and then trim down or you can select the section of the clip and drag in down to the timeline. Check out the articles below to go over using iMovie.
Select clips
http://help.apple.com/imovie/mac/10.0/#move8b2e15e3
Trim, split, and move clips
http://help.apple.com/imovie/mac/10.0/#movf8b8fc9b2
Regards,
-Norm G.

Similar Messages

  • How can I view the code for a routine in an update rule

    on loading data for 0PLANT_ATTR, I am getting an error for No Local Currency found in Plant 1000 and SAles Org 6000. 
    in looking at the update rules for this, I see that there is a routine for the update of the local currency:
    Perform GET_LOCCURRCY_FOR_PLANT
    USING COMM_STRUCTURE-PLANT
    COMM_STRUCTURE-SALESORG
    CHANGING hlp_monitor
    RESULT
    hlp_subrc.
    How do I see the code behind this?  I want to make sure that I understand everything that needs to be populated in Master Data so that I can ask my functional consultant to update all the necessary fields.
    Thanks
    JP

    Hi Riccardo,
    When I double click on it, I get a message at the bottom that says program reindexed. 
    After looking again, I found that when I double clicked on the comm structure, then the routine, I was able to see it.
    Thanks
    JP

  • How can I view the details of a pending plan change?

    I received a flyer saying I could probably save some money if I came in and changed plans. I went to my local Verizon store and met with an associate who set me up with a new plan to start next billing cycle. He didn't give me any paperwork and I can only find the details for the current plan. How can I view the details for the new one?

    Hello pitviper1091!
    I apologize that you did not receive a receipt in the store. You cannot view a future dated plan change on My Verizon, until the date that it goes into effect. It should go into effect on your new bill cycle. You could return to the store to request a copy of the paperwork, or we could assist you in checking your account to confirm what changes will occur.
    MichelleH_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • How can I view the contents of a free trial for adobe fireworks cs6 on mac

    how can I view the contents of a free trial for adobe fireworks cs6 on mac.
    My friend told me to find the application in finder then hit control and click it and then it should give you the option to click
    "view package contents"
    This was not the case
    please help thank you

    When posting in Apple Communties/Forums/Message Boards.......It would help us to know which iMac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
    CLICKY CLICK---> https://discussions.apple.com/docs/DOC-3602
    CLICKY CLICK-----> Help us to help you on these forums

  • How can I view the number of tunes in the Library? The number shows for Playlists but not for the total Library.

    How can I view the number of tunes in the Library? The number shows for Playlists but not for the total Library.

    Hello,
    I apologize for submitting this question.  Soon after I posted it I saw a similar question that had my answer..
    Again, my bad for not looking first.
    Ron Morris

  • How can I change the duration for all clips in iMovie 10.2

    How can I change the duration for all clips in iMovie 10.2?  I'm used to working in the older version of iMovie where all I had to do was click on the gear on the clip and change the duration. ALso could use the tool bar to set the duration for all clips. Can't figure out how to do that in this new version. Any suggestions would be appreciated.

    In the timeline select the clip whose duration you want to change. Click the adjust button at the top of the viewer and then click the i button and you can set the duration. For multiple clips select them all and in the i button type in the duration you want and it will be applied to all the selected clips. You can also change the duration of a clip in the timeline by putting the cursor over the beginning or end of a clip and dragging. A popup will show the new duration.

  • How can I view the USMT recovery key in SQL report

    Hello all,
    Can anyone help me to provide sql query for below link… What I am looking is Just to create a report with all computers that has computer association any type with the recovery key information.
    http://www.windows-noob.com/forums/index.php?/topic/1763-how-can-i-view-the-usmt-recovery-key/
    I have tried below but not working so looking for help…..
    SELECT     TOP (100) PERCENT dbo.v_StateMigration.SourceName, dbo.v_StateMigration.SiteCode, dbo.v_StateMigration.SMPServerName, 
                          dbo.v_StateMigration.SourceMACAddresses, dbo.v_StateMigration.RestoreMACAddresses, dbo.StateMigration.StateEncryptDecryptKey, 
                          dbo.StateMigration.StorePath, dbo.StateMigration.StoreSize
    FROM         dbo.StateMigration INNER JOIN
                          dbo.v_StateMigration ON dbo.StateMigration.SMPServerName = dbo.v_StateMigration.SMPServerName CROSS JOIN
                          dbo.v_UserStateMigration
    WHERE     (dbo.StateMigration.StorePath IS NOT NULL) AND (dbo.StateMigration.StoreSize IS NOT NULL)
    ORDER BY dbo.v_StateMigration.SourceName

    Try this.
    SELECT Distinct
    SM.SourceName,
    SM.SiteCode,
    SM.SMPServerName,
    SM.SourceMACAddresses,
    SM.RestoreMACAddresses,
    SMT.StateEncryptDecryptKey,
    SM.StorePath,
    SM.StoreSize
    FROM
    dbo.v_StateMigration SM
    JOIN dbo.v_UserStateMigration UM on SM.RestoreClientResourceID= UM.RestoreClientResourceID
    join dbo.StateMigration SMT on SM.SMPServerName = SMT.SMPServerName
    WHERE
    (SM.StorePath IS NOT NULL)
    AND (SM.StoreSize IS NOT NULL)
    ORDER BY
    SM.SourceName
    http://www.enhansoft.com/

  • How can I view the complete score with all tracks? I seem to only be able to view one track at a time. Thanks

    How can I view the complete score with all tracks? I seem to only be able to view one track at a time. Thanks

    JoBrooke wrote:
    I seem to only be able to view one track at a time.
    unfortunately, that is how GB works, it only offers a score for a single track at a time

  • How can I view the size of a particular event in iPhoto '11?

    How can I view the size of a particular event in iPhoto '11? The 'Get Info' option is not displaying the size of the event like it used to in iPhoto 8.

    But the event does not really have a size - you can export the photos and make the size pretty much what you want - while it is in iPhoto it is an event
    I guess that iPhoto could report the size of the original photos as imported - or the size of the modified photos if exported as JPEGs - or the size of the modified photos if exported with a maximum dimension of 1080 - but the event simply is photos and does not have a "size" until you export it
    Obviously you want to know the size but the question was
    what is your puprose for knowing the size?
    WIth that information maybe there is a way to get you what you want
    But the basic answer is simply that an event does not have a size - an event is a collection of photos and each photo has either two or three versions in the iPhoto library and each photo can be exported for outside use in several formats and at any size
    LN

  • How can I change the password for the USER in SAP.

    How can I change the password for the USER in SAP?
    also I want to change the Language and  date Format b/c it's displaying in German language..

    Hi,
    Assuming that User has already his/her user-id and password, and now he/ she wants to change it.
    select the client and provide Log-in credentials. Now, instead of 'ENTER' there is one Tab: 'New Password' (up, left hand). Click it.
    Now, system will ask for new password to change.
    If you are asking from Basis point of view, then T.code: SU01 - User Maintenance.
    Enter User's id and Click Change icon.
    It will lead to Page: Maintain User.
    Here, Select tab: Logon Data
    There is a Sub-Tab: Password.
    Here, key-in change password and SAVE.
    For Language and Date format, contact your Basis-Personnel.
    Best regards,
    Amit

  • After downloading a pdf from a website, how can I view the file in Safari 6.0.4 (just as I can in Safari 5.0.6)?  I bet that it's simple, but I've missed something, somewhere, and a solution will be greatly appreciated.

    After downloading a pdf from a website, how can I view the file in Safari 6.0.4 (just as I can in Safari 5.0.6)?  I bet that it's simple, but I've missed something, somewhere, and a solution will be greatly appreciated.

    Hello Kirk,
    Thank's for your efforts, and I just wish that this was the solution.  Unfortunately, it isn't because, after double-clicking on the pdf in the website, it simply "opens" in another Safari window as a black screen - the pdf is there, somewhere, but not visible (either as an icon, or as a document). 
    When I right-click in the black Safari window, where the file is supposed to be, the only option available to display the file is to "Open file in Internet Explorer" (which is not what I want to do).  Other options include saving or printing the pdf, which I don't want until I've confirmed that it's the form that I want.  The same options are offered if I right-click on the file icon in the website.
    Any other suggestions, please?

  • How can I view the videos of adobe flash player that apple no longer support?

        How can I view the videos from the internet and networking of adobe flash player that apple no longer support?

    Flash Player version 10.1.102.64 is the last version available to PPC Mac users. However, this Flash version won't work for many videos on Facebook, YouTube and other sites. Adobe's latest version, 10.2.x or later, is only for Intel Macs. Adobe will not provide a newer Flash version for PPC Macs.
    The message requesting that you download Adobe Flash Player takes you to Flash Player requiring an Intel processor. Doesn't work on a PowerPC processor. I found a hack, installed it & it works with Firefox, TenFourFox & Safari.
    Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
    Hack Allows PowerPC Macs to Access Flash 11 Content
    http://lowendmac.com/ed/royal/12sr/flash-11-and-powerpc.html
     Cheers, Tom

  • How can i view the variables of the session memory

    Hi experts
       How can i view the variables of the session memory.Such as I want display the variables of memory which id is 'BULRN' in ABAP debug.
    In program i can use import from memory id visit the momery of session,but i don't know the name of variables which store in momery of my session.

    Its not possible to view in the debug mode..
    SAP memory is a memory area to which all main sessions within a SAPgui have access. You can use SAP memory either to pass data from one program to another within a session, or to pass data from one session to another. Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters). These parameters can be set either for a particular user or for a particular program using the SET PARAMETER statement. Other ABAP programs can then retrieve the set parameters using the GET PARAMETER statement. The most frequent use of SPA/GPA parameters is to fill input fields on screens
    SAP global memory retains field value through out session.
    set parameter id 'MAT' field v_matnr.
    get parameter id 'MAT' field v_matnr.
    They are stored in table TPARA.
    ABAP memory is a memory area that all ABAP programs within the same internal session can access using the EXPORT and IMPORT statements. Data within this area remains intact during a whole sequence of program calls. To pass data
    to a program which you are calling, the data needs to be placed in ABAP memory before the call is made. The internal session of the called program then replaces that of the calling program. The program called can then read from the ABAP memory. If control is then returned to the program which made the initial call, the same process operates in reverse.
    ABAP memory is temporary and values are retained in same LUW.
    export itab to memory id 'TEST'.
    import itab from memory Id 'TEST'.
    Here itab should be declared of same type and length.

  • I'm using Premiere Elements 11, which automatically opens in a project window for HD. I want to reset the default for SD. How can I reset the defaul for opening a project?

    I'm using Premiere Elements 11, which automatically opens in a project window for HD. I want to reset the default for SD. How can I reset the default for opening a project?

    scottypet
    For Premiere Elements 11 and 12, you cannot change its default project preset from NTSC AVCHD Full HD1080i30 or its PAL counterpart PAL AVCHD Full HD1080i25 to something else.
    For each project, you can set the project preset manually if you do not want the program to take over setting the project preset based
    on the properties of the first drag to the Timeline.
    To set the project preset manually, open the project to the Expert workspace, go to File Menu/New/Project and Change Settings.
    In the Change Settings area, change the project preset. Before you exit that area, be sure to have a check mark next to "Force Selected Project Setting on This Project" in the new project dialog.
    Then you import your source media, using the appropriate Add Media choice.
    ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
    If you want a version of Premiere Elements that uses the default project preset of NTSC DV Standard or its PAL counterpart PAL DV Standard, then you need to look to a version of Premiere Elements earlier than 11.
    Please let me know if you have any further questions on this or need clarification.
    Thank you.
    ATR

  • How can I view the source code of chrome://browser/content/browser.xul?

    How can I view the source code of chrome://browser/content/browser.xul of mobile FireFox?
    In my desktop version I just open this page in new tab and view webpage source, but there is no option for FF mobile to view source code.
    Best regards.

    Does the view-source: protocol work on mobile?
    *view-source:chrome://browser/content/browser.xul

Maybe you are looking for