How can I work around a DVD burning problem

Steve Grisetti: How can I work around a DVD burning problem?
Question: Does PSE and PE -7 solve this problem or make any difference at all?
Joanna

This article, from the FAQ list at the top of this forum, is valid for all versions, since it may be a problem for any.
http://www.adobeforums.com/webx/.59b5f52c
The problem is not so much with Premiere Elements as it is with challenges faces in the operating system registry. Basically, DVD burner programs, like Nero, which are installed on your computer at the factory, refuse to share access to the DVD burner with other programs.

Similar Messages

Home Sharing turns off as soon as my computer enters sleep mode. How can I work around this issue?

Home Sharing turns off as soon as my computer enters sleep mode. How can I work around this issue?

please start firefox in safemode (by pressing the shift-key while it is launching) & go to ''firefox > options > advanced > general'' & disable hardware acceleration.
for some background on that issue you can also refer to [https://bugzilla.mozilla.org/show_bug.cgi?id=812683 bug #812683]

How can I work around 1316 error that won't let me uninstall and then reinstall Elements 12

Elements 12 stopped working and the shortcut no longer finds the executable file. There does not appear to be a repair function on the installation CD. As a result, I have tried unsuccessfully to uninstall the program using Windows 7 64 bit uninstaller, Iobit Uninstaller, and Revo Pro Uninstaller. In each instance, I get the error "Error 1316. A network error occurred while attempting to read from the file c:\Windows\Adobe\Installer\Adobe Photoshop Elements 12.msi." As a test, I ran Iobit Uninstaller 3 as an administrator, but that was not successful either.Each time, the program rolls back when it detects the 1316 error. I can neither install or uninstall Photoshop Elements at this time.
How can I uninstall the program completely and then reinstall it either from my Elements 12 installation CD or from the same files on my hard drive?

"The feature you are trying to use is on a network resource that is unavailable."
It then asks for an alternate path to find "iTunes.msi"
with that one, let's try the following procedure.
first, head into your Add/Remove programs and uninstall your QuickTime. if it goes, good. if it doesn't, we'll just attend to it when we attend to itunes.
next, download and install the Windows Installer CleanUp utility. use it to clear any existing itunes and/or QuickTime installation configuration information from the PC.
Description of the Windows Installer CleanUp Utility
next, use the the following document as a guide for manual removal of leftover itunes and quicktime program files:
Removing iTunes and QuickTime for Windows
now try another itunes install. does it go through properly this time?

How can I work around this issue when buying a new mac? And what will the difference be in speed?

OK. In a nutshell.
I am getting render times (converting to H.264 for web, 8000kbps, 720x1280) of about 25 minutes with my current Macbook Pro - 4GB ram. Without doing anything else with the machine.
First question - how much can I reasonably expect this time to reduce to with:
A. 21.5-inch: 2.5GHz
2.5GHz Quad-Core Intel Core i5
1920 x 1080 resolution
4GB (two 2GB) memory
500GB hard drive1
AMD Radeon HD 6750M with 512MB
- - - OR - - -
B. 15-inch: 2.2 GHz
2.2GHz quad-core
Intel Core i7
4GB 1333MHz
500GB 5400-rpm1
Intel HD Graphics 3000
AMD Radeon HD 6750M with 512MB GDDR5
Built-in battery (7 hours)2
Am I going to buy myself much time?
Secondly I would like to keep my existing MacBook Pro. Installed on this machine I have FCP 6. I regulary edit as I own a produciton company. I cannot upgrade to Lion as it does not support FCP 6.
I could upgrade to FCP 7 (which would cost a fortune and still would only provide one licence) or FCP 10. The later is attractive, but looking at Apple's Specs, I meet all the specs on my MacBook bar the graphics card. I have a GL Graphics Card (GeForce 8600M GT) but for some reason this is excluded from the list of acceptable graphic cards.
So...the possibilities are:
A. Get a iMac. Downgrade it to Snow Leopard. Back up from my Time Machine so FCP is now on both machines. Is this even possible? Since the license will only cover one machine?
B. Get a iMac. Keep as Lion and buy FCP 10. Upgrade MacBook to Lion, but partition the drive with Snow Leopard so I can still have FCP 6. Download FCP 10 to my MacBook and hope it works even though my graphics card is not supported (I hear it might). How do I even get FCP 10 on my MacBook? Will it tell me I cannot install it because it recognises I don't have the right graphics card?
C. Get a MacBook Pro. Do all the above, but if it doesn't work, sell my old MacBook Pro.
Any help on this matter would be greatly appreciated.

The warranty will be valid within one year from the original date of purchase. this is the date that the device was purchased either from apple or an apple authorized reseller.
you are able to purchace the applecare protection plan within one year of the original date of purchase as well, provinding there is no accidental damage to the device.
This page pertains to your question:
http://www.apple.com/support/products/faqs.html
hope it helps.

CS5 Print Booklet is not generating a booklet. How can I work around this?

I have updated to CS5 and now when I use "print Booklet" for my 12 page inDesign document, no pdf is produced. In CS3, the pdf appeared with no problem, ready to take to the printer, all spreads ready for saddle stitch printing on ledger paper. I can produce a pdf of the spreads as one reads it, or a pdf of each 8 1/2 x 11 page saparately, just not the booklet. I have read of people using a script to make a booklet in CS5. It seems that Adobe should fix this problem, and in the meanwhile make it clear where to get the script and how to use it.
I'm using Snow Leopard on a Mac, Snow Leopard and CS5 both new to me at the same time. I think CS3 was better, perhaps, but I no longer have it.
All help will be appreciated.
judymueller

Hi Judy,
If you'd like to give us a try please do. Just go to www.quite.com and download a Demo copy. Here is a temporary number so you can test drive our products before you purchase.
Quite Imposing Plus 2.9 (approx. $899.00). If, you are just doing booklets and basic Imposition check out Quite Imposing 2.9 (approx. $475.00)
Works with Acrobat 5.0 thru 9.0 plug-ins (MAC/WIN).
Once loaded, check out Getting started tech sheet - go to our Imposition Control Panel and click on the ? button.....then click the Getting Started button.
Lots of good information on signature setups and Step-by-step Instructions and New features. Orhttp://www.quite.com/imposing/techsheet/
Here are your temporary serial numbers:
Quite Imposing
Expires end 2/2011 Serial 6386-4776-6617-8717 Code 4263
Quite Imposing Plus
Expires end 2/2011 Serial 6704-8851-8612-4682 Code 6957
If you want a workflow imposition product check out Quite Hot Imposing...however, I don't think you need that in this case.
cheers,
Charles
Charles James
Technical/Marketing Director
Quite
USA
858.581.9143
[email protected]
[email protected]
www.quite.com

TS3992 My iPad screen is frozen on "iCloud Backup" and I cant do anything with it. How can I get around this???

How can I work around a frozen screen issue on an iPad?

Welcome to the Apple Support Communities
Press Home and Power buttons and it will restart

HT1751 On an old Mac I got this message while trying to burn a CD for the car: "The attempt to burn a disc failed. The burn failed because of a medium write error." What does this mean? And how do I work around it?

On an older Mac I got this message while trying to burn a CD for the car: "The attempt to burn a disc failed. The burn failed because of a medium write error." What does this mean? And how do I work around it?

I had been getting this all morning and checked other messages from the community. THe one which worked was trying a different brand of disc.
I had been using Verbatim which had copied the music fine off the Real Player on my PC at school, but wouldn't work with I Tunes. Tried a Staples and an Office Depot CD-R , both of which did the job.

Someone changed my mother's adminstrative password. Now she can't update software or make changes. How do you work around that?

Someone changed my mother's administrative password, and that person can't remember what he changed it to. How do I work around this?

You have to get the install disc that came with the computer and boot to it.
Put the cd in and restart the computer. Hold down the C key and it will bo into the installer.
Once in you can click on the top menu and select reset password. Click the user and reset the password.

How can I convert my Tiger DVD into a CD without spending more money?

How can I convert my Tiger DVD into a CD without spending more money and time? I've spent over seven hours trying to upgrade an iMac 350 Hz OS 9.1 to Tiger. I have changed the iMac firmware to 4.1.9, but found that my Panther disc was only an OSX Upgrade, although the 3 cds are labeled as Installation Discs. Since I have a Tiger disc I thought I would use that. Unfortunately, my iMac only reads CDs, not DVDs. I tried networking the iMac to my G5, but upon shutdown, the OSX disc cannot be accessed. I copied the DVD files to my iMac hard drive, but again, the OSX disc cannot be accessed after shutdown.
Is there a way I can burn a CD from the files of my Tiger DVD to get this task accomplished?

Excuse me, but I never thought of that, nor did I have any intention of trying to rip off your company.
I purchased four iPods for my family this Christmas. I have six iMacs just sitting around not being used. I thought that I would turn one into an iPod work station, so everyone can use one computer to recharge and hook up to iTunes 7.
Unfortunately, iTunes does not work very well in OS9. Apple decided not to continue to support OS9 very well. I’ve spent several hours attempting to upgrade the iMac so I could set up iTunes 7. Unfortunately, my 3 Panther Installation Discs were mislabeled, and did not allow me to install OSX over OS9. My OSX 10.2.7 Installation Disc is a DVD, and my Tiger Installation disc is a DVD. Neither usable to update the iMac.
All I want to do is set up a dumb iMac as a network interface to my G5 because I've use all of the G5's ports for our recording studio and the iPods need external power source if they are plugged directly into the G5.
If you could show me an easier way to run iTunes 7 on the iMac I wouldn't be as ****** off as I am at Apple for not supporting the 9 older computers I own with usable help and upgrades.

Hello. I recently updated my ipad to ios 8.1 and i can no longer connect it to my macbook (osx 10.5.8). itunes (10.6.3) does not recognize it. how can i delete around 3000 pics i imported to my ipad from my old macbook?

hello. I recently updated my ipad to ios 8.1 and i can no longer connect it to my macbook (osx 10.5.8). itunes (10.6.3) does not recognize it. how can i delete around 3000 pics i imported to my ipad from my old macbook?

Click here, buy a Mac OS X 10.6 DVD, and then run the 10.6.8 combo updater.
(90452)

Flash CS6 cant open play SWF files without importing and destroying them, how can I get around this?

Flash CS6 can't open play SWF files without importing and destroying them, how can I get around this?
I'm just trying to preview an swf file in flash like I have with all previous versions.

What if my SWF loads external content from an online server?
Not only does the current flash player prohibit such activity, it doesn't even pop open an error anymore saying there was an error connecting to an online source.
Normally, I would simply drag the SWF into Flash and all connections would go through. I could see traces, errors, and experience no issues.
Now I can't even do that. So what then? You have crippled a fundamental use of the program, but THANK GOD we have that deco brush that nobody asked for.
And for the record, the nature of my work benefits from not necessarily allowing the Flash Player to connect to online content. The error it pops up? That's simply another method of error checking that I require. Updating the Flash Player options is not an option.
Why would you even remove this key feature from Flash anyways? It's been there for years ... has the ratio of people importing SWFs (a rather useless gesture in an increasing OOP world) really outweighed the people using Flash as a testing environment that much?

How do i work around 2 different frame rates in same sequence??

hello,
a client of mine just shot a video using two frame speeds...24PA and regular 24p.
how can i get around this? so far i captured the 24PA footage using the pulldown in the FCP, and the 24P in a regular 48k capture...
i am currently editing in a 23.98 timeline, but the 24p footage looks slower...HELP!
thanks,
steve

hi kyle,
sorry, but just to elaborate on your response a little while ago here:
- i captured the 24PA footage using the advanced pulldown
- i captured the 24P footage using no pulldown
- i am editing in a 29.97 timeline now, as most of my footage was shot with 24P
please let me know your thoughts on how i should go about working with this footage!
thanks!
steven

How can I scroll around an image if its zoomed out?

Hey guys, quick one for you.
I have no problem using the hand tool/spacebar to scroll around an image when zoomed into it, but as soon as I can see the whole thing I can't scroll around anymore and its just locked to the center
I am a After Effects user so I find this a bit annoying that I can't do this, so I figure there MUST be a setting somewhere I could change to enable it.
Thanks!

by Buko wrote:
Sorry but "How can I scroll around an image if its zoomed out?" has got to be one of the stupidest question I've heard on this forum in some time. Brandon really needs to think before posting.
I've noticed your usual vitriol toward people having simple questions has ramped up about 200% since the advent of Jive, Buko. Maybe you need to disengage, or neck some holy fermented blue agave juice and take a nap?
I see the question as perfectly cromulent, and I use the suggestion I've given quite often. Apparently, a good reason why anyone would want to do that has escaped you, and it's made you even crankier than usual. So you react by giving the gift of vile condescension instead of just ShuttingTFU and letting someone else handle it. (Next time you blast Ramon for the same thing, take a look at your own behavior). And apparently, it's not enough for you to just accept that the way someone else wants to work is different than your workdflow, or is something that never even occurred to you. Maybe some folks just want an answer to their question, and secretly wish you'd shove your bad attitude up your [asterisk-substituted name for your lower-dorsal body opening]. Of course, some folks are just too polite, or they're new visitors here and won't say that to you because they don't know the legacy players and behaviors here. But I'm not either of those things, and I will. Because if you can dish it out, surely you can take it, right? RIGHT!?!?
Now...why do I think the question is worth answering? Sometimes I want to be able to have an entire smallish image visible at 100% magnification in order to view it as it will appear in its final destination. AND I want to do some work on it while keeping all my currently-open Palettes visible; maybe I want to move my image out of the way of a big dialogue box I've called up. (I'm only working on one monitor...sorry if that makes your hardened jaw drop down to your chest).
In Single-Window made mode I'd have to grab and move the whole window, but I can't do that if I have a big dialogue window open. In full screen mode I can scroll around and see all parts of that image at 100% without having to Tab my palettes to their hidden state, or shove my open dialogue nearly off-screen.
Think past your own nose, Dude! And LightenTFUp!

I am having trouble setting up my Yahoo! e-mail account on my phone...it asks for my Password and I type it in correctly and, carefully, but I get an error window, "MF Message Error Domain error 1032" -what does thi smean and how can I get around it?

I am having trouble setting up my Yahoo! e-mail account on my phone...it asks for my Password and I type it in carefully and correctly, but I get an error window, "MF Message Error Domain error 1032" -what does this mean and how can I get around it? My password is long and convoluted, but it works when I type it in on my main Mac workstation, just fine.....what gives?

try restarting the phone and try again

I upgraded my macbookpro hard drive to 1 TB then migrated my files from time machine. I'm now locked out of the computer because the password is not the same as my usual one and one that was years old and not retreivable. How do I work around this?

I upgraded my macbookpro hard drive to 1 TB then migrated my files from time machine. I'm now locked out of the computer because the password is not the same as my usual one and one that was years old and not retreivable. How do I work around this?

Whether or not you are able to recover the data off the drive yourself will depend on if the drive suffered any impact damage in the crash. You can buy USB SATA or IDE adapters (Intel and almost all G5 use SATA) that will let you connect your hard drive to a computer (like a flash drive) to see if you can recover the data. If the drive has suffered physical damage if may not mount.
If you know someone who has one of these adapters you could try using theirs, otherwise you could buy one but you take the risk of the data on the drive being non recoverable. Regardless, both are much cheaper than $1699!
(Alternatively, if you know of someone with a Mac Pro or PowerMac G5 they may be able to install the drive in their machine and try to boot from or mount it and copy the data off.)

How can I work around a DVD burning problem

Similar Messages

Maybe you are looking for