How can I work around this issue when buying a new mac? And what will the difference be in speed?

OK. In a nutshell.
I am getting render times (converting to H.264 for web, 8000kbps, 720x1280) of about 25 minutes with my current Macbook Pro - 4GB ram. Without doing anything else with the machine.
First question - how much can I reasonably expect this time to reduce to with:
A. 21.5-inch: 2.5GHz
2.5GHz Quad-Core Intel Core i5
1920 x 1080 resolution
4GB (two 2GB) memory
500GB hard drive1
AMD Radeon HD 6750M with 512MB
- - - OR - - -
B. 15-inch: 2.2 GHz
2.2GHz quad-core
Intel Core i7
4GB 1333MHz
500GB 5400-rpm1
Intel HD Graphics 3000
AMD Radeon HD 6750M with 512MB GDDR5
Built-in battery (7 hours)2
Am I going to buy myself much time?
Secondly I would like to keep my existing MacBook Pro. Installed on this machine I have FCP 6. I regulary edit as I own a produciton company. I cannot upgrade to Lion as it does not support FCP 6.
I could upgrade to FCP 7 (which would cost a fortune and still would only provide one licence) or FCP 10. The later is attractive, but looking at Apple's Specs, I meet all the specs on my MacBook bar the graphics card. I have a GL Graphics Card (GeForce 8600M GT) but for some reason this is excluded from the list of acceptable graphic cards.
So...the possibilities are:
A. Get a iMac. Downgrade it to Snow Leopard. Back up from my Time Machine so FCP is now on both machines. Is this even possible? Since the license will only cover one machine?
B. Get a iMac. Keep as Lion and buy FCP 10. Upgrade MacBook to Lion, but partition the drive with Snow Leopard so I can still have FCP 6. Download FCP 10 to my MacBook and hope it works even though my graphics card is not supported (I hear it might). How do I even get FCP 10 on my MacBook? Will it tell me I cannot install it because it recognises I don't have the right graphics card?
C. Get a MacBook Pro. Do all the above, but if it doesn't work, sell my old MacBook Pro.
Any help on this matter would be greatly appreciated.

The warranty will be valid within one year from the original date of purchase. this is the date that the device was purchased either from apple or an apple authorized reseller.
you are able to purchace the applecare protection plan within one year of the original date of purchase as well, provinding there is no accidental damage to the device.
This page pertains to your question:
http://www.apple.com/support/products/faqs.html
hope it helps.

Similar Messages

  • Home Sharing turns off as soon as my computer enters sleep mode.  How can I work around this issue?

    Home Sharing turns off as soon as my computer enters sleep mode.  How can I work around this issue?

    please start firefox in safemode (by pressing the shift-key while it is launching) & go to ''firefox > options > advanced > general'' & disable hardware acceleration.
    for some background on that issue you can also refer to [https://bugzilla.mozilla.org/show_bug.cgi?id=812683 bug #812683]

  • Is this ipod touch 2nd or 3rd Generation, and what is the difference?

    Hi,
    Could anyone tell me if this ipod touch 2nd or 3rd Generation, and what is the difference?
    http://www.johnlewis.com/230690655/Product.aspx
    & also would this sleeve fit this ipod model?
    http://www.johnlewis.com/230680469/Product.aspx
    Thanks.
    P.s.
    I'm hoping to get this soon so would be really appreciative of
    your responses.

    There is no hardware difference between what people refer to as a "second-generation" and "third-generation" 8GB iPod touch. The only difference is the version of OS included. Since the site says it's "new" I would presume it's the version with the 3.x version of the OS, but I'd suggest confirming with John Lewis.
    As to the case, I don't believe there's any difference in the physical specs between the 2nd-gen and 3rd-gen hardware, so any case that fits one should fit the other.
    Regards.

  • CS5 Print Booklet is not generating a booklet. How can I work around this?

    I have updated to CS5 and now when I use  "print Booklet" for my 12 page inDesign document, no pdf is produced. In CS3, the pdf appeared with no problem, ready to take to the printer, all spreads ready for saddle stitch printing on ledger paper. I can produce a pdf of the spreads as one reads it, or a pdf of each 8 1/2 x 11 page saparately, just not the booklet. I have read of people using a script to make a booklet in CS5. It seems that Adobe should fix this problem, and in the meanwhile make it clear where to get the script and how to use it.
    I'm using Snow Leopard on a Mac, Snow Leopard and CS5 both new to me at the same time. I think CS3 was better, perhaps, but I no longer have it.
    All help will be appreciated.
    judymueller

    Hi Judy,
    If you'd like to give us a try please do. Just go to www.quite.com and download a Demo copy. Here is a temporary number so you can test drive our products before you purchase.
    Quite Imposing Plus 2.9 (approx. $899.00). If, you are just doing booklets and basic Imposition check out Quite Imposing 2.9 (approx. $475.00)
    Works with Acrobat 5.0 thru 9.0 plug-ins (MAC/WIN).
    Once loaded, check out Getting started tech sheet - go to our Imposition Control Panel and click on the ? button.....then click the Getting Started button.
    Lots of good information on signature setups and Step-by-step Instructions and New features. Orhttp://www.quite.com/imposing/techsheet/
    Here are your temporary serial numbers:
    Quite Imposing
      Expires end 2/2011  Serial 6386-4776-6617-8717  Code 4263
    Quite Imposing Plus
      Expires end 2/2011  Serial 6704-8851-8612-4682  Code 6957
    If you want a workflow imposition product check out Quite Hot Imposing...however, I don't think you need that in this case.
    cheers,
    Charles
    Charles James
    Technical/Marketing Director
    Quite
    USA
    858.581.9143
    [email protected]
    [email protected]
    www.quite.com

  • How can I get around this issue? Error Code: U43M1D207

    Adobe InDesign CC Update
    There was an error downloading this update. Please quit and try again later. Error Code: U43M1D207
    I quit all running adobe programs except the Adobe Application Manager and I still get this error. It seems that I am not able to do any application upgrades.
    I sure wish Adobe would provided a direct link to an update file.
    Why is it that the updates within the CS 6 applications will work but not in the CC versions?

    drmacmike wrote:
    I quit all running adobe programs except the Adobe Application Manager and I still get this error. It seems that I am not able to do any application upgrades.
    I sure wish Adobe would provided a direct link to an update file.
    Why is it that the updates within the CS 6 applications will work but not in the CC versions?
    The CC updates for InDesign aren't listed on Adobe's page, but you can download them here:
    All CC Updates – Direct Links for Windows
    All CC Updates – Direct Links for Mac OS

  • I upgraded my macbookpro hard drive to 1 TB then migrated my files from time machine. I'm now locked out of the computer because the password is not the same as my usual one and one that was years old and not retreivable. How do I work around this?

    I upgraded my macbookpro hard drive to 1 TB then migrated my files from time machine. I'm now locked out of the computer because the password is not the same as my usual one and one that was years old and not retreivable. How do I work around this?

    Whether or not you are able to recover the data off the drive yourself will depend on if the drive suffered any impact damage in the crash. You can buy USB SATA or IDE adapters (Intel and almost all G5 use SATA) that will let you connect your hard drive to a computer (like a flash drive) to see if you can recover the data. If the drive has suffered physical damage if may not mount.
    If you know someone who has one of these adapters you could try using theirs, otherwise you could buy one but you take the risk of the data on the drive being non recoverable. Regardless, both are much cheaper than $1699!
    (Alternatively, if you know of someone with a Mac Pro or PowerMac G5 they may be able to install the drive in their machine and try to boot from or mount it and copy the data off.)

  • I bought a used iPhone on ebay.  when I try to activate it, I get a message that the owner needs to sign in to the device with their appleID and password.  I have no way of knowing who the owner is.  How can I get around this?

    I bought a used iPhone on ebay.  when I try to activate it, I get a message that the owner needs to sign in to the device with their appleID and password.  I have no way of knowing who the owner is.  How can I get around this?

    Check the eBay listing. Did it state the device was Activation Locked? If not, then make a claim as Meg stated and get a refund. You will not be able to activate the phone and no one can help you contact the owner, unless that is the person that sold the device. If they cannot remove the phone from their account because it is not theirs, then refund is your route. Even Apple cannot assist with locating the previous owner.

  • Flash CS6 cant open play SWF files without importing and destroying them, how can I get around this?

    Flash CS6 can't open play SWF files without importing and destroying them, how can I get around this?
    I'm just trying to preview an swf file in flash like I have with all previous versions.

    What if my SWF loads external content from an online server?
    Not only does the current flash player prohibit such activity, it doesn't even pop open an error anymore saying there was an error connecting to an online source.
    Normally, I would simply drag the SWF into Flash and all connections would go through.  I could see traces, errors, and experience no issues.
    Now I can't even do that.  So what then?  You have crippled a fundamental use of the program, but THANK GOD we have that deco brush that nobody asked for.
    And for the record, the nature of my work benefits from not necessarily allowing the Flash Player to connect to online content.  The error it pops up?  That's simply another method of error checking that I require.  Updating the Flash Player options is not an option.
    Why would you even remove this key feature from Flash anyways?  It's been there for years ... has the ratio of people importing SWFs (a rather useless gesture in an increasing OOP world) really outweighed the people using Flash as a testing environment that much?

  • I have an older version of iTunes on my office computer and it will not let me update to the current version without an administrative password. How can I get around this??

    I have an older version of iTunes on my office computer and it will not allow me to upgrade to the newer version without an administrative password. How can I get around this???

    If you have an iBook G4, (PPC) you can't do much.
    But if that is a MacBook (intel) you may be able to
    upgrade the OS X, if the hardware is up to it...
    Since there were about nine different build models
    of MacBook (not powerpc iBook) to identify what
    one you have would be the first step to knowing
    what OS X and RAM upgrades it could use.
    If the computer is not already at OS X 10.6.8,
    it can't go online to get or use OS X 10.7.5. So,
    when you more accurately describe the 'Book,
    detailed information is available.
    When you find the serial number, there is a web
    page that can be used to identify by serial no.
    http://www.powerbookmedic.com/identify-mac-serial.php
    That'd be a first step. Or even the Model number
    which should be visible on the outer case by hinge.
    Good luck & happy computing!

  • I can't remeber my password for i cloud and the email address is no longer active to reset it, how can i get around this

    i can't remember my password for i cloud and the email address is no longer active to reset it, how can i get around this.

    iForgot iCloud Password
    Alternatives for Help Resetting Security Questions and/or Rescue Mail
         1. If you have a valid rescue email address, then use this procedure:
             Rescue email address and how to reset Apple ID security questions.
         2. Fill out and submit this form. Select the topic, Account Security. You must
             have a Rescue Email to use this option.
         3. This is the only option if you do not already have a valid Rescue Email.
             These are telephone numbers for contacting Apple Support in your country.
             Apple ID- Contacting Apple for help with Apple ID account security. Select
             the appropriate country and call. Ask to speak to the Account Security Team.
         4. Account security issues almost always require you to speak directly to an
             Apple representative to securely establish your identity as the account holder.
             You can set it up so that Apple calls you, either immediately or at a time
             convenient to you.
                1. Go to www.apple.com/support.
                2. Choose Contact Support and click Contact Us.
                3. Choose Other Apple ID Topics and choose the appropriate topic for
                    your issue.
                4. Follow the onscreen instructions.
             Note: If you have already forgotten your security questions, then you cannot
             set up a rescue email address in order to reset them. You must set up
             the rescue email address beforehand.
    Your Apple ID: Manage My Apple ID.
                            Apple ID- All about Apple ID security questions.

  • Itunes 11.1.5 will not sync new apps with iPhone 5 iOS 7.0.6 and gives grayed out "install" no message?  How does one work around this?

    Itunes 11.1.5 (MacBook Pro,OS 10.6.8) will not sync new apps with iPhone 5 iOS 7.0.6 and gives grayed out "install" no message?  How does one work around this?

    Just reboot your laptop... While its rebooting try to reboot your phone also by holding the home and power buttonn for 10-15 seconds...When your phone is turned off try to connect it to iTunes and it will recognize your phone in recovery mode.
    If you have the .ipsw file for iOS 7.0.6 saved in your desktop then in itunes press shift and click on Restore.
    Select the ipsw file and let it restore.
    If you dont have it downloaded then simply click on restore.
    I hope it works
    Cheers !

  • I was recently blocked from using app Jack'D. Message I receive says "Your device has been blocked". How can I get around this?

    I was recently blocked from using app Jack'D. Message I receive says "Your device has been blocked". How can I get around this?

    Quoted from their FAQ's:
    I got an error message saying my device is blocked. Why did this happen?
    There are two reasons this could happen: You have deleted your account or you have been banned due to violation of terms of service.
    - You have deleted your account.
    When you delete your account, you agree that your device would be blocked for at least one month. This policy is enforced in order to protect users from stalkers. (If the system allowed users to create and delete their accounts any time they wanted, the Block feature would be compromised and wouldn't be able to protect users effectively.) Please understand this is not a punishment but a security measure intended to keep all of our users safe.
    - You have been banned due to violation of terms of service.
    Users of this mobile application are required to comply with our terms of service and instructions provided by our service team. The most common violations include, but are not limited to: Creating multiple accounts, uploading pictures not complying with our terms, and abusing the Report feature. In most situations, you will get a warning before you are banned from the app. If you receive a warning from our service team, please read it carefully and take it seriously. If anything is not clear, please contact user support for clarification.

  • TS3992 My iPad screen is frozen on "iCloud Backup" and I cant do anything with it. How can I get around this???

    How can I work around a frozen screen issue on an iPad?

    Welcome to the Apple Support Communities
    Press Home and Power buttons and it will restart

  • How can I work around a DVD burning problem

    Steve Grisetti: How can I work around a DVD burning problem?
    Question: Does PSE and PE -7 solve this problem or make any difference at all?
    Joanna

    This article, from the FAQ list at the top of this forum, is valid for all versions, since it may be a problem for any.
    http://www.adobeforums.com/webx/.59b5f52c
    The problem is not so much with Premiere Elements as it is with challenges faces in the operating system registry. Basically, DVD burner programs, like Nero, which are installed on your computer at the factory, refuse to share access to the DVD burner with other programs.

  • How can I get around Javascipt issue with keyboard events?

    Javascript issue: keydown, keypress, keyup events cause quick search to initiate with the division key on the keypad and slash key on the keyboard. I am trying to program a graphic representation of a 10 key pad and the division (/) sign is problematic for roll over and processing based on key events. How can I get around this? further notes: Safari also has problems with key events and the division key(s) but no search function connected. Thankyou for time and attention

    A good place to ask questions and advice about web development is at the mozillaZine Web Development/Standards Evangelism forum.<br />
    The helpers at that forum are more knowledgeable about web development issues.<br />
    You need to register at the mozillaZine forum site in order to post at that forum.<br />
    See http://forums.mozillazine.org/viewforum.php?f=25

Maybe you are looking for

  • Changing font in canvas doesn't work

    Hi, this is the code: g.setFont(Font.getFont(Font.FACE_PROPORTIONAL, Font.STYLE_BOLD,Font.SIZE_LARGE)); While in the emulator and in my old Motorola V975 it works, in my Moto V3i it doesn't (the font remain always the same). Any suggestions, please ?

  • Execute a query in Jdeveloper using DB adpater

    Hi All , In jdeveloper, using DB adapter i want to execute the following query , select segment1,eng_item_flag from table_name where segment1 in ('itemnumber1','itemnumber2'); In the query the operation IN got used so could you please help me to proc

  • SPUM4 Issues before upgrade to ECC6.0

    Hi All, I am trying to do vocabulary check in SPUM4 before upgrade for ECC6.0. I have 3 Development clients 010,100,110. My issue is that, I am not sure in which client I should do this vocabulary check. Is it in 000 or individual clients.I got this

  • Measuring point External Number range

    Dear Masters, I am trying to create the external number range for one of my measuring point type. Is it not possible to do so? If no why? If yes how? Thanks to all in advance.

  • Can't add iChat agent password to keychain...

    Here's one for you veteran iChatters...Is there some reason why I must type in the password for iChat agent each and every time I reboot? I've tried adding it manually to the keychain, but it still pops up with that annoying dialog at startup. It's t