How can I work on a .ihtml file in Dreamweaver CS3?

Hello,
Can someone tell me how I can make Dreamweaver CS3 treat a
.ihtml (html based template) file like a standard .html or .htm
file? I can open the ihtml file in DW, but can only work on it in
Code View. Is there a way to make DW parse the file so I can work
with it in Design View as well? I can rename the file and work with
it, but that becomes a real pain. I've tried everything, but
nothing seems to work. Help!

http://www.macromedia.com/cfusion/knowledgebase/index.cfm?id=tn_16410
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Dev20" <[email protected]> wrote in message
news:f4fue9$qm$[email protected]..
> Hello,
>
> Can someone tell me how I can make Dreamweaver CS3 treat
a .ihtml (html
> based
> template) file like a standard .html or .htm file? I can
open the ihtml
> file in
> DW, but can only work on it in Code View. Is there a way
to make DW parse
> the
> file so I can work with it in Design View as well? I can
rename the file
> and
> work with it, but that becomes a real pain. I've tried
everything, but
> nothing
> seems to work. Help!
>
>

Similar Messages

How can I work with individual AVCHD files?

I have some recorded videos in the AVCHD format that I transfered from my girlfriend's camera to my computer. When I access them, it shows me all of the videos in a batch, and I can't right click for any options. I also can't drag and drop the individual files. All I can do is play them. My goal is to get these videos on YouTube and Facebook, but I need to know how I can. Thanks!

More than likely you will need an AVCHD converter. The following thread is rather old but the suggestions mentioned may be of some help or at least steer you on the right track: https://discussions.apple.com/thread/1531527?start=0&tstart=0

How can I work the raw file from Canon 5D MkIII in Photoshop Elements 9?

how can I work the raw file from Canon 5D MkIII in Photoshop Elements 9?

You can download the 7.1 DNG converter to make copies of your canon raw files in the adobe dng format, which can then be opened in pse 9.
As said above the the latest camera raw plugin 6.5 for pse 9 won't open those files directly, but will open the the converted dng files.
windows:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5389
mac:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5388

How can I work with my adobe Lightroom Version 5 which was added to my Samsung NX3000. If I want to load an .SRW File it is not possible, only the .JPG File. How and from where can I the Module and how is it to install ?

How can I work with my adobe Lightroom Version 5 which was added to my Samsung NX3000. If I want to load an .SRW File it is not possible, only the .JPG File. How and from where can I the Module and how is it to install ?

You need Lightroom 5.5 or later (the most current version is 5.7.1). This is a free update if you have already purchased an earlier version of Lightroom 5.
Product updates

How Can I Work With PHTML Files In Dreamweaver ??

I want to work with PHTML files in Dreamweaver CS3 - How do I
go about getting this to work?

The solutions is either of the following:
Adobe Lightroom - Find moved or missing files and folders
Copy the photos back into the exact same folder and folder location that they were in before
I don't know what you actually did "when I pasted it back" ... but the bigger issue is that you shouldn't be working with these files in your operating system, period. Once you import them into Lightroom, you don't manage these files in your operating system.

How can I delete the photos or files in my iCloud storage that is no longer needed?

How can I delete the photos or files in my icloud storage that is no longer needed?

Explain how it didn't work and what you are trying to delete. Since icloud doesn't store photos except for those in a backup (then delete the backup); photos in photo stream do not count towards your storage limit.

How can I import an project .imoviemobile file to imovie 10.0.6 on my mac book for further processing

How can I import an project .imoviemobile file to imovie 10.0.6 on my mac book for further processing?

You can't. (http://www.macworld.com/article/2057972/imovie-for-ios-projects-no-longer-work-o n-the-mac.html)
Geoff.

How can I convert a dBase IV file to Excel on my MAC computer??

How can I convert a dBase IV file to Excel on my MAC computer??
I downloaded the DoxBox program which enables me to use DOS programs such as dBase in my new MAC computer and it does work nicely!!

This is what Excel now imports:

How can I run a SQL script file...

How can I run a SQL script file from a location on my computer without providing the whole path?
Is there some way I can set a "Working folder" in SQL Plus??
Thanks!
Tom

You can create an environment variable called "SQLPATH" which is a list of directories that SQL*Plus will search for your .SQL
scripts.
I would like to use another directory than the oracle/bin...
How can I do this ??
Hello,
U can do this by this way:
Save odm_script.sql file to the default Oracle
directory i.e. Oracle-Home/bin and Run following command
through SQL Plus.
SQL>@Script_Name
I hope this will resolve ur problem.
Regards,
Omer Saeed Khan.

URGENT PLEASE:How can I run a a class file on the Apache server?

Hi Guys and Gurus,
I am seeking some favor all of experienced gurus, i.e.
How can I run a a class file on the Apache server? Can I run through an Applet?
How can I set Environment variables in Windows2000 Professional Environment?
Actually, I want to extract some records from a MySQL Database running on Apache Server. I wrote a program just to select the columns and show them. It is now a Class file, Now how can I run this class file from the Server???
The code is here
import java.sql.*;
public class RecordShow {
public static void main(String args[]) {
String url = "jdbc:mysql://localhost/myhost";
Connection con;
String query = "select mytable.column," +
"from mytable " +
"where mytable.column = 1";
Statement stmt;
try {
Class.forName("com.mysql.jdbc.Driver");
} catch(java.lang.ClassNotFoundException e) {
System.err.print("ClassNotFoundException: ");
System.err.println(e.getMessage());
try {
con = DriverManager.getConnection(url,
"myuser", "mypassword");
stmt = con.createStatement();
ResultSet rs = stmt.executeQuery(query);
ResultSetMetaData rsmd = rs.getMetaData();
int numberOfColumns = rsmd.getColumnCount();
int rowCount = 1;
while (rs.next()) {
System.out.println("Row " + rowCount + ": ");
for (int i = 1; i <= numberOfColumns; i++) {
System.out.print(" Column " + i + ": ");
System.out.println(rs.getString(i));
System.out.println("");
rowCount++;
stmt.close();
con.close();
} catch(SQLException ex) {
System.err.print("SQLException: ");
System.err.println(ex.getMessage());
Please advise... THANKS
VJ

Ehm, I wasn't referring to you at all... read up,
there's a comment by jschell saying that CGI might be
easier/better for his purposes.
Yep.
I know PHP/Perl/whatever might be easier for some
purposes, but only if you happen to know them and want
to/are able to use them. Ok. But you aren't the one asking the question are you. And the person who asked the question seems to have absolutely no familiarity with Apache or applets.
So whatever they do they are going to have to learn a lot.
And that does indeed suggest that in all likelyhood they have not investigated the alternatives.
And for the vast majority of internet applications, especially with smaller projects (obvious this person is not working with a large team), using perl, or something besides java, is going to be the best business solution. It is simpler, and more secure (probably due to the fact that it is simpler.)
Since this is a Java forum, I
answer under the assumption that people have made a
choice one way or another to use a Java solution to
their problem, so I try to solve it in Java first, and
only when that fails (very seldom) do I turn to other
solutions.You approach problems by arbritrarily deciding to try to solve it in java first and only if you fail do you then look to other solutions?
My first step is to try to figure out which of the various avenues is going to cost less. (And a secondary, but non-trivial concern, is then to convince the customer that just because they have heard of a buzz word like 'enterprise bean' that it doesn't mean that is a cost effective solution.) We must come from different worlds.

How can I transfer a big .pdf file e.g. 9 MB from my Macintosh Performa 5200 and its OS 8.1 to an USB-flash drive?

How can I transfer a big .pdf file e.g. 9 MB from my Macintosh Performa 5200 and its OS 8.1 to an USB flash drive? E.g. is there any adapter available in order to connect the SCSI with USB? Or is it better to use a compression software and transfer it to 10 3,5" floppy discs?
Thank you
Emanuel

Hello Emanuel,
The Performa 5200CD did not have built-in Ethernet as standard, so unless an Ethernet card (or an external SCSI or LocalTalk-to-Ethernet adapter) has been added, that method would not be available in this case.
Your suggestion involving compression software (such as an appropriate version of StuffIt) with segmenting capabilities could of course be one alternative.
If you have an internal or external modem for the Performa, another way could be to use the telephone lines for transfers. A communications program would have to be used on both sides (for example, ZTerm or the communications section of ClarisWorks on the Performa).
It is even possible to connect two serial modems directly. A simple line simulator (in principle, a 9 V battery in series with a 680 ohm resistor in one of the leads in an RJ-11 to RJ-11 cable), which can be built in a couple of minutes, is sometimes needed. Do NOT use a line simulator for units connected to the public telephone network.
Yet another solution could be a null-modem transfer to a PC with a (DB-9M) serial port. This would require a null-modem cable (can be designed by combining a Macintosh modem cable (MiniDIN-8M to DB-25M) with a normal PC-style (DB-25F to DB-9F) null-modem cable . HyperTerminal or another communications program can be used on the PC.
What do you have to work with (other computers/models/platforms)? Is this a one-time transfer, or do you plan to send additional files later? Is the intention to continue to use the Performa 5200?
Jan

I have a 27" iMac with 16GB of factory installed SDRAM and 1T harddrive. It is telling me the harddrive is full and is not functioning correctly. How can I adjust so that all files are managed on the harddrive rather than the SDRAM. (BTW - design flaw)

Processor 3.4 GHz Intel Core i7
Memory 16 GB 1333 MHz DDR3
I have a 27" iMac with 16GB of factory installed SDRAM and 1T harddrive. It is telling me the harddrive is full and is not functioning correctly. How can I adjust so that all files are managed on the harddrive rather than the SDRAM. (BTW - design flaw here.)
Older Macs with a single Harddrive would simply expand OS management on the drive, and I think I understand the new Fusion Drive to do just that, but how do I get this product that I spent a great deal of money on to be more than a pretty screen?

I was confused by this statement
It is telling me the harddrive is full and is not functioning correctly.
OS X manages ram and when you run out, it create swapfiles to extend your ram on the HDD (Hard Disk Drive). The OS itself, takes about 16 gig of space and that too resides on the HDD. Your 16 gig of RAM is really a temporary space that holds things from the HDD so the processor can work on them. There is no design flaw between your ram and HDD. Something else is going on and there are a lot of smart people here to help you figure out what that "something else" is.
I would do three things. First I would create a backup, backups are important. Second, I would reboot into recovery and repair my HDD. Lastly while still booted in recovery I would repair permissions.
Can you capture a screen shot of the exact error you are getting?

How can I play my itunes music files on Hama Internet Radio? My Hardware: iMac Maverick and iPad 2

Hardware: iMac OSX Maverick, ipad 2, iOS 8.1.2, iPhone 5, IOS 8.1.2
Internat Radio: Hama DIR 3100
How can I play my itunes music files on my internet radio? Is there an App for iPad or iMac?
Thanks
ursulaanna

Thanks for the suggestion. I subsequently realized that my Airplay settings on ITunes are ok. The problem is with the settings on Pure Music. I still havent figured this out. When i stream using just ITunes, it works fine, but when I play music using ITunes / Pure Magic, I still have an issue with Apple TV.

I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?

I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?

I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?
Both the AVI and the MOV file extensions refer to the file container and not the compressed data the file contains. Both are generic file containers in that each may contain any valid combination of audio and/or video data that is compatible with the codec component configuration of the system on which the file was created. On the other hand, whether a file is playback compatible, conversion compatible, and/or edit compatible depends on the data actually contained in the file container. So, you are basically dealing with two separate issues here—the container and what is inside it.
Basically, if you want to make your files ediit compatible with iMovie, you must change your file container to one that is acceptable to iMovie and convert the data to edit compatible audio and/or video compression formats as may be necessary. The best approach is to determine what codecs were actually used to create the original AVI files and add them to your system if possible. In most cases a codec package like Perian can be added to your system's codec component configuration to may the AVI file playable. Once they are playable, in the QT 7 app then they can be chnged or converted to file types and compression formats that can be edited in iMovie. (While Perian handles most codecs commonly used to create AVI files, it does not handle all possibilities and, while the Perian codec package still works under cureent Mac OS versions, its development group has decided to drop further development/support of the package.)
Background: AVI is a file container originally developed by Microsoft back in 1992 but for which official support was discontinued about 11 years. Despite its limitations, Windows users still tend to use this file based on its open source ease of use and generic nature, thus, making its use so popular that most users are unwilling to switch to more modern but less generic file types. Since some AVI legacy compression formats have never been transcoded for the Mac or use beyond OS 9 or OS X PPC platforms, it is often important to know what specific compression formats are contained in the AVI file to know which codecs to add to your system and which not to add in order to avoid possible codec conflicts.
You can use many different converters to convert AVI files to iMovie edit compatible files. Most third-party apps contain their own buit-in codecs which do not relay on the Mac codec component configuration. Free ones, like HandBrake, usually have limited conversion capabilities while those that have more varied outputs are usually commercial in nature and will cost you additional cash. QT 7 Pro or the free MPEG Streamclip app allow you to access you own system's component configuration and use any available codec component like DV, AIC, MPEG-4, H.264, Photo JPEG, etc.—all of which are iMovie compatible for editing purposes—but only after making the AVI file QT 7 player compatible.
In order to determine what compression formats wewre used in your AVI files you can
1) Try checking the Finder "Info" window,
2) Use the "Inspector", "Media Info", or "Properties" window of any player app that will open the file, or
3) Use a general media utility app like "MediaInfo" to read the file characteristics.

How can i work in office word or excel

Hello sir,
1) Is there any options to make new file in word or excel?
2) How can i work in new file of word or excel or it's only use for update file?

Davlem wrote:
I work at the same tieme in two laguagues I mean in a pages document I work in English but in other one I am working in French. I can't be changing from English to spanish etc, that's really complicated because I have to be restarting the computer each time I am doing that
In Pages you just go to Inspector > Text > More > Language and switch it there. No need to restart anything.
For other apps, you can try Edit > Spelling and Grammar > Show Spelling and Grammar and change the dictionary there.
I don't think there is yet any reliable way to change spellcheck automatically when you change language.

How can I work on a .ihtml file in Dreamweaver CS3?

Similar Messages

Maybe you are looking for