How can I work with Bahnhof.se and airport extreme

hej,
I bought airport extreme and startedwith Bahnhof.se 100/100
The problem is that I can activate only one dator.
But I possess iPad, mini iPad 2 iphones and macbook air
When I need my macbook, I have to activate this dator on Bahnhof.se and my iPad is then not available.

z
converter(adapter) usb 3(compatible with 2) to thunderbolt
I want to connect my sound card to laptop but I can not because I need converter (adapter)

Similar Messages

  • How can I work with my adobe Lightroom Version 5 which was added to my Samsung NX3000. If I want to load an .SRW File it is not possible, only the .JPG File. How and from where can I the Module and how is it to install ?

    How can I work with my adobe Lightroom Version 5 which was added to my Samsung NX3000. If I want to load an .SRW File it is not possible, only the .JPG File. How and from where can I the Module and how is it to install ?

    You need Lightroom 5.5 or later (the most current version is 5.7.1). This is a free update if you have already purchased an earlier version of Lightroom 5.
    Product updates

  • How can I print with the black and white cartridge only?

    I am trying to print using the black and white cartridge only because magenta is out of ink but I'm getting the following error message in HP Photosmart C7200 series print dialog:
    The printer is out of ink.
    The following ink cartridges are empty: Magenta. Replace these ink cartridges to resume printing.
    How can I print with the black and white cartridge only?
    Mac OSX 10.7.3
    HP Photosmart C7280 (7200 series)
    This question was solved.
    View Solution.

    I am absolutely disgusted by this; clearly a scam from HP to make more money by selling extra ink cartridges!!  I will make sure to never buy any products from the shoddy rip off merchants at HP ever again!!
    You should be ashamed!!

  • Mistakenly opened all the folders in my library of music and the Finder stopped working. Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing they reappear

    mistakenly opened all the folders in my library of music and the Finder stopped working.
    Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing will reappear

    mistakenly opened all the folders in my library of music and the Finder stopped working.
    Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing will reappear

  • HT4262 How can I connect 6 computers simultaneously to Airport extreme?

    I have tried troubleshooting several ways and the some computers work and others don't. How can I connect 6 wireless computers to Airport Extreme?

    Matt
    Is it possible to speak on the phone?  The situation is so convoluted it might be easier to help me get back on track in person. When I first had this issue I got on an apple site that had a chat room in which I typed in my problem.  After several missives back and forth, the apple technician asked for my number and we spoke on the phone. The technician walked me through rebooting the actual airport plug (as opposed to the router box) and got me up and running. Do you know how I can relocate that chat site for technical support?
    Thanks
    David

  • Will an old Airport Express work with a 4th generation AirPort Extreme?

    My Airport Express model A1084 will not seem to work with my 4th generation AirPort Extreme.
    I've tried everything I could think of to get it to work.
    I am able to set it up(Extend existing network) with a copy of Snow Leopard but although it has a green light and seems to be working, I can't pick up a signal on any of my devices. Everything on iStumbler looks ok to me except the channel on the Airport express is 3 and the Extreme is 149. The Express is on the 2.4 ghz and the Extreme is 5ghz. What should I look for on iStumbler that might give me a clue?
    Thanks,
    Mot

    The A1084 does not have a setting to "extend a wireless network", so it cannot be used for that purpose with the newer AirPort Extreme.
    The A1084 Express can "join" the wireless network provided by the AirPort Extreme, and be used for AirPlay and to run a remote USB printer, but the Express does not provide any additional wireless signal coverage when it joins a wireless network.
    You need the new A1392 version of the Express or the previous version, the A1264 if you want the Express to "extend" a wireless network wirelessly.
    The older A1084 Express could be used to provide more wireless coverage if you can permanently connect the Express to the Extreme with a wired Ethernet cable connection.

  • Is the Time Capsule wi-fi router compatible with the Nest thermostat? I've read where there are issues with the Nest and Airport Extreme (AE)? Is AE used in the Time Capsule?

    I've read where there are issues with the Nest and Airport Extreme (AE)? Is AE used in the Time Capsule?
    If so, i already have a wi-fi router, so can the Time Capsule simply be used for wireless backup instead of as a router if there is conflict?

    A TC is fundamentally a AE with a sata chip included to drive the hard disk. Some slightly different bios to include disk functions, although most of those are also on the AE. So as a router it is 99.999% identical.
    And yes, if you have another router you can easily bridge the TC and use wireless for backups and internet connection. Once you no longer route through the TC the issues with most NAT problems including port forwarding should disappear.. mostly this is due to all apple routers using NAT-PMP instead of upnp which is the near universal standard for opening ports.. without upnp apple keep their routers more exclusive.

  • How to connect my iPad, Brother printer, and AirPort Extreme?

    How to connect my iPad, Brother printer, and AirPort Extreme?

    I don't believe any of the Brother printers are AirPrint-enabled. Is your Brother printer network-ready? That is, does is support either/both a wired or wireless connection or just uses USB to connect?

  • How can I work with big iMovie 6 file?

    I am trying to make a one 70 minute movie with iMovie 6 but am having great difficulties because the file has reached 78 gig and is now unworkable because it is just too slow to even play. Even cutting it in half does not solve the problem. Each half will play but I can't work with them in the timeline. I need to add more audio files and music. Any suggestions?

    I suspect most slowdowns occur because of complex audio, not the size of the project. It sometimes helps to export the audio to an AIFF file, then re-import that file back into the project and place it in its own audio track. When you disable the audio of the other tracks, playback is improved.
    That makes it harder to edit a half-finished project, however. It's a technique best reserved for almost-finished projects.
    You could export the timeline to the camera, then re-import it to a new project. That will both make the project smaller and "flatten" its audio and video. Most clips will return as the clips they are now.
    70 minutes of video is ordinarily about 15GB, so something has increased the size substantially. (That's not normally a problem you have to worry about; the size of the project itself is probably not the problem.)
    Karl

  • Extending a network with Time Capsule and AirPort Extreme (via Belkin powerline)

    Hello -
    I've seen many topics about extending wireless networks here, but none seems to resolve the issue I'm having. I currently have a setup where a DSL cable modem is connected to a Time Capsule and I need to extend this network to another room using an AirPort Extreme.
    I live in a very old apartment in Brazil and the walls seem to block the signal from one room to another, hence the need to extend it. Since wireless signal is very weak between rooms, I bought a Belkin powerline AV500 so I could connect both Time Capsule and AirPort using the electrical power at home (just installing a regular Ethernet cable between rooms is not an option).
    I started with the basics: configure the Time Capsule + DSL as a standalone network, and it works perfectly within it's range. Then I connected the Belking powerline, plugged a MacBook via Ethernet on the other end and still got very good results (actually better speed than expected). Used it for a while with streaming and other network intensive tasks to make sure it could sustain the connection.
    Finally, pluggned the AirPort Extreme on the Belking powerline and this is where the problems started. AirPort Utility 6.3.1 only gives me the option of extending a network wirelessly - it doesn't seem to give me the option of extending it via Etherenet (roaming), which is not good in my case. Luckly I had a copy of AirPort Utility 5.6 which seems to do the job (or I thought so), but it's still not working well.
    Although I managed to configure both with the same name, it doesn't seem reliable and some devices (the iPhone 5, for example) are unable to connect and end up with a self-asigned IP address. I'm almost sure I'm doing something wrong on the setup, as I've seen a similar setup working before, so if anyone out there has any clue of what can be done, it will be much appreciated.
    Attached the screenshots of both Time Capsule and AirPort Extreme configurations.
    Thanks a lot,
    -TM
    AirPort Exteme:
    Time Capsule:

    Hello JuliaApple. Welcome to the Apple Discussions!
    You have several ways to configure both base stations for what you are trying to do.
    The simplest would be to configure the Time Capsule (TC) to "join" (AirPort Utility > Manual Setup > Wireless tab > Wireless Mode = Join a wireless network) your existing 802.11n AirPort Extreme Base Station (AEBSn). In this type of configuration the TC would perform as any other wireless client and not perform as a router. It will; however, still allow for both backups and sharing USB devices attached to it.

  • I have a digital storage oscillosco​pe tektronix 2430,and an old style GPIB card (8 bit, ISA). How can I work with labVIEW?

    My GPIB card is NI one, but it is 8 bit-ISA. I have LabVIEW (4.,5.1 and 6i version). I want to work with my digital storage oscilloscope Tektronix 2430. I need your experiences.

    Hi there,
    My suggestion is start try with "MAX" to communicate with your scope,
    Download the driver for the scope from NI.com. And from there you can get started.
    Good Luck and if you need any help, just post in this forum.
    When you feel sad, laugh

  • ¿How Can I work with webmatrix and dreamweaver? (extensions cshtml, vbhtml,etc...)

    Well as I said, I have some issues with this situation, I will like to work with webmatrix (SQL helpers, and cool stuff) improving it with the great adobe´s web design technologies, Dreamweaver CC 2014 of course as the main support, please bring me some sort of solution I am sure I am not the only one.

    Well I am actually working with both of them, it happens that Web matrix only build my webpage from server code, I mean, I don´t have much options for a web design, I am used to work with the template first in dreamweaver with HTML file extensions, then use it as a VBHTML extension, I would like to work from the VBHTML extension so I can test every single change that I make in webmatrix as I continue working with the degin in Dreamweaver

  • How Can I work with Internet Explorer? I have an application that runs in IDOCS and Firefox, Chrome or Safari are not compatible

    I recently update from Leopard to Lion but I see that Internet Explorer is not working because PowerPc is not longer supported...I work for an Engineering Company that uses Idocs as document management and uses Internet Explorer for accessing and linking Docs by Default ,,,Chrome, Firefox and Safary don´t work with Idocs..
    Please advice..

    I believe you would need to install a copy of Windows using Boot Camp and then use IE in that OS.  There is no current OSX compatibility with IE that I know of.

  • How can i work with getdate() in my query if i have a varchar datatype on where clause column ?

    Hi All,
    I have a column like lastdate with varchar datatype. now I want to work with lastdate column in where clause with getdate().
    Ex:  where
    getdate()  -  lastdate < 1
    when I use above one I got error like
    Error = Conversion failed when converting date and/or
    time from character string.
    I knew the datatypes for lastdate and getdate() are different...
    how can I use...
    Thanks,
    rup

    You need to convert the string date to datetime or date. See conversion examples here:
    http://www.sqlusa.com/bestpractices/datetimeconversion/
    Example for the where clause:
    WHERE DATEDIFF(DD, convert(datetime, lastdate, 101), getdate() ) < 1
    Can you post sample string dates?
    Are you looking for today's records? Another option (depends on lastdate format):
    WHERE lastdate = convert(char(8), getdate(), 112)
    Kalman Toth Database & OLAP Architect
    SQL Server 2014 Design & Programming
    New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

  • How can I get my time capsule and airport express (as a network extension) working properly together?

    Hi,
    I bought a time capsule a while back and connected it to my modem, and it seems to be backing up my hard drives but I can't tell if I'm getting my wireless signal from my time capsule or from the modem itself, which used to before I bought the time capsule.
    It's bugging me because I'm trying to get my airport express to work as an extension to my network, and airport utility half the time can't pick up the express. I heard that it will only work of the time capsule is working as the base station,and I'm not 100% sure this is the case.
    Also, how far can the airport express be from my time capsule for it to be picked up? I tried resetting it which helped to start with, but when I was setting it up to extend my network it just told me that there was an error and to try again, which I did with the same result.
    Any advice would be much appreciated!
    Cheers

    Always do setups with ethernet.. setting up wireless via wireless is like cutting off the branch you are sitting on.
    You do not need the TC in the network to do the setup.
    Plug it by itself into the computer. Same with AE. But do each separately.
    Give the TC a different wireless name.. like TC.. then you will know the TC wireless is separate and different to the main modem router. Simply allow it to be extended.
    Plug it back into the main modem.
    Now do the AE.. set it to extend the wireless of the TC.
    When you do this check the signal level. The airport utility v5 has a full diagnostic of wireless client levels.. do not use v6 utility.. it is useless. The AE is placed somewhere in between the TC and the clients you want to connect.. it has to get decent signal itself to extend wireless. And there is no way we can tell you how far apart.. pick the half way point.. around about and suck and see. If it doesn't work move closer to the TC.
    Count the walls the signal is going through.. about 15% signal loss for each one.. if angle is acute 20%.. floors are worse.. they might be 20-25%..

Maybe you are looking for