How can I work with individual AVCHD files?

I have some recorded videos in the AVCHD format that I transfered from my girlfriend's camera to my computer. When I access them, it shows me all of the videos in a batch, and I can't right click for any options. I also can't drag and drop the individual files. All I can do is play them. My goal is to get these videos on YouTube and Facebook, but I need to know how I can. Thanks!

More than likely you will need an AVCHD converter.  The following thread is rather old but the suggestions mentioned may be of some help or at least steer you on the right track:  https://discussions.apple.com/thread/1531527?start=0&tstart=0 

Similar Messages

  • How can I join/merge my AVCHD files that I tape with my camcorder without re-encoding the files?

    I have a lot of tapes that cut in the middle while recording more than 12 minutes. I would like to join/merge my files. What should I do? Which softwares should I use?

    Because I don't have any of Sony's softwares, or softwares that they use, I can't help much on that side of things, but programs that I use are
    Freemake Video Converter to convert it into a format that VirtualDub can read, then use VirtualDub to load up the first file, then use the Amend AVI to add the next file that you want to merge, and keep going until you're ready.
    Then I check the video and audio compression, make sure they're on full compression, choose the codec and video bitrate, and audio bitrate that I want, and save.
    I'm sure Sony's programs, or the ones they use, make it much easier. Try PlayMemories and Sony Vegas, they'll work with the AVCHD files without too much extra converting (and if it does convert, it's all in-program so should be much easier)

  • How can I work with my adobe Lightroom Version 5 which was added to my Samsung NX3000. If I want to load an .SRW File it is not possible, only the .JPG File. How and from where can I the Module and how is it to install ?

    How can I work with my adobe Lightroom Version 5 which was added to my Samsung NX3000. If I want to load an .SRW File it is not possible, only the .JPG File. How and from where can I the Module and how is it to install ?

    You need Lightroom 5.5 or later (the most current version is 5.7.1). This is a free update if you have already purchased an earlier version of Lightroom 5.
    Product updates

  • How can I import or download AVCHD files on a memory card to FCE?

    How can I import or download AVCHD files on a memory card to FCE?

    What camera is this from? Make sure it is actual AVCHD and not some variant such as AVCHD Lite which is not supported.
    Also, try this: In the Log and Transfer Pane, click on the Gear icon do set the preferences and set the Import 
    Preferences > AVCHD Plugin > AC3 Audio to Plain Stereo.
    You can also download a trial version of Clipwrap and see if by converting the files to AIC with that software, then importing the files to FCE you have better luck.
    http://www.divergentmedia.com/clipwrap
    MtD

  • How can I work with big iMovie 6 file?

    I am trying to make a one 70 minute movie with iMovie 6 but am having great difficulties because the file has reached 78 gig and is now unworkable because it is just too slow to even play. Even cutting it in half does not solve the problem. Each half will play but I can't work with them in the timeline. I need to add more audio files and music. Any suggestions?

    I suspect most slowdowns occur because of complex audio, not the size of the project. It sometimes helps to export the audio to an AIFF file, then re-import that file back into the project and place it in its own audio track. When you disable the audio of the other tracks, playback is improved.
    That makes it harder to edit a half-finished project, however. It's a technique best reserved for almost-finished projects.
    You could export the timeline to the camera, then re-import it to a new project. That will both make the project smaller and "flatten" its audio and video. Most clips will return as the clips they are now.
    70 minutes of video is ordinarily about 15GB, so something has increased the size substantially. (That's not normally a problem you have to worry about; the size of the project itself is probably not the problem.)
    Karl

  • How Can I Work With PHTML Files In Dreamweaver ??

    I want to work with PHTML files in Dreamweaver CS3 - How do I
    go about getting this to work?

    The solutions is either of the following:
    Adobe Lightroom - Find moved or missing files and folders
    Copy the photos back into the exact same folder and folder location that they were in before
    I don't know what you actually did "when I pasted it back" ... but the bigger issue is that you shouldn't be working with these files in your operating system, period. Once you import them into Lightroom, you don't manage these files in your operating system.

  • I accidentally cut instead of copied a folder of previously imported raw files. When I pasted the folder back I could see it in Windows Explore but not in the LR library. How can I work with these files again?

    HI,
    My daughter will often ask me to give her raw files I've taken at family events so that she can process them in her own copy of LR. (I work too slowly, apparently.) Recently I inadvertently cut instead of copied a folder. When I pasted it back I could see it in Windows Explorer but not in my LR library. I thought that re-importing the files might work, LR gave me a message that they were already imported. I expect there is a way to make the files available again in LR and would be grateful for some advice.
    thanks
    Ken

    The solutions is either of the following:
    Adobe Lightroom - Find moved or missing files and folders
    Copy the photos back into the exact same folder and folder location that they were in before
    I don't know what you actually did "when I pasted it back" ... but the bigger issue is that you shouldn't be working with these files in your operating system, period. Once you import them into Lightroom, you don't manage these files in your operating system.

  • How can I work with avchd with FCE?

    I bought Final Cut Express 4.0 and when I configured the easy setup just appeared HDV and DV setups. How can I configure AVCHD?

    You've probably seen "Log & Capture" as the method to get the video to your computer.
    Careful how you archive the AVCHD footage from your camera.
    It seems as though it can very easily become inaccessible.

  • How can I work on a .ihtml file in Dreamweaver CS3?

    Hello,
    Can someone tell me how I can make Dreamweaver CS3 treat a
    .ihtml (html based template) file like a standard .html or .htm
    file? I can open the ihtml file in DW, but can only work on it in
    Code View. Is there a way to make DW parse the file so I can work
    with it in Design View as well? I can rename the file and work with
    it, but that becomes a real pain. I've tried everything, but
    nothing seems to work. Help!

    http://www.macromedia.com/cfusion/knowledgebase/index.cfm?id=tn_16410
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Dev20" <[email protected]> wrote in message
    news:f4fue9$qm$[email protected]..
    > Hello,
    >
    > Can someone tell me how I can make Dreamweaver CS3 treat
    a .ihtml (html
    > based
    > template) file like a standard .html or .htm file? I can
    open the ihtml
    > file in
    > DW, but can only work on it in Code View. Is there a way
    to make DW parse
    > the
    > file so I can work with it in Design View as well? I can
    rename the file
    > and
    > work with it, but that becomes a real pain. I've tried
    everything, but
    > nothing
    > seems to work. Help!
    >
    >

  • How can I work with lightroom when I use two computers ?

    I am new to Lightroom and work with a laptop at home and a PC at work. Before I started to use LR3 I simply duplicated my pic files onto both machines, edited on whichever machine I wanted and then synchronised the folders. This system provided me with a working copy at either home or work and also a backup copy on the other machine.
    I would like to operate the same system with LR3 but am unable to figure it out due to the automatic filing system used by the programmme to seperate the raw files and the instructions for those files.
    Can anyone provide me with simple step by step instructions on how to transfer the files/instructions by using  a flash drive and "Copy and replace"system
    as I am totally confused by the grammar, syntax, and terminology used by Adobe.

    Hi Geoffbubbles,
    if you see only 1 photo you did export only 1 photo in the catalog.
    Make sure you select all (e.g. <ctrl> A or remove the tick from "export selected photos only" in the dialog box of export-as-catalog =>will pick the total folder).
    What Dorin mentions are catalogs as transportation vehicles between the two LR computer catalogs.
    Let's assume you start on your home-comp and transfer to the work-comp.
    When you EXPORT you give a name "home-to-work" for the transport catalog. You decide if you include the pictures by ticking "exclude negative files".
    You would do so only for the first time, when your work-comp would not yet have them.
    These are the original files which would never be touched, but which LR needs to have available to do develop work (i.e. to write develop instructions into its database). [Or maybe only you need them in order to have LR display the effects of what you are doing, if your slider settings achieve your desired result.]
    When you transfer your new settings from the work-comp to the home-comp which has the original files already you only need to transfer the DB-records for the files, i.e. the catalog parts. Then it is sufficient to export-as-catalog (name it "work-to-home") without the tick for the negative files. Which will obviously save a lot of data to transfer.
    As would leaving off the tick for "include available previews", but then your receiving computer would have to render the previews itself - your choice where you spend the effort.
    Depending on your ticks checked in export dialog the data on the transfer stick will show different folders:
    1 wrapping folder with the name you specified as transportation catalog name (in the example above "home-to-work")
    therein the catalog file *.lrcat (home-to-work.lrcat)
    if "include negative files" ticked: as many subfolders as the original folder structure/names of the pictures in it had on the sending machine
    if "include available previews" ticked: an *Previews.lrdata-folder ("home-to-work Previews.lrdata") with lots of subfolders labelled 0...F
    On the receiving computer, when you IMPORT FROM CATALOG, you only select the *.lrcat-file.
    In the dialog box you decide if you import the negative files (prereq you had included them) or if you just add them without moving (why not leave them on the stick i.o. actually copying over to the work-comp?). If there are no new photos, but just new settings, you can either overwrite your old settings (which is probably your intention) or tick "preserve old settings as virtual copies".
    When you use Dorins smart collection "Touched today" the virtual copies should not show up upon re-export on the way "work-to-home", provided you have further tweaked the master versions only. Or they do because in the end you liked them better and continued tweaking on them.
    Note if you do not include previews: you might need to tell LR on the receiving comp to rerender the previews if it contains the photos and earlier previews already - I am not sure, if LR starts off on its own to rerender them.

  • How can I work with Word users?

    Hi. Used to love love my old Apple. Then had to go to PC for work. Now I've got a new iMac and it is terrible. Main issue: I need to edit a person's word file, then send it back. How can I save it without it turning into Pages.

    Meantime, I exported my Pages file to Word and emailed it to client. Client received a Word file that was the ugly original file, with all my work not there. I went back to the Pages file, saved again then exported. Still the ugly original. So I changed the name of the Pages file and exported as Word. Text still the ugly original. I went to 'All my Files' and deleted the ugly original. Still Pages converted to Word and gave me the ugly one. What is going on?
    PS, I've looked at Office for iMac. What version would you recommend? Also, where does it tell me what sort of iMac I have - PPS or what? It's not on the paperwork. I bought it from Dick Smith about 6 weeks ago.

  • How can i work with getdate() in my query if i have a varchar datatype on where clause column ?

    Hi All,
    I have a column like lastdate with varchar datatype. now I want to work with lastdate column in where clause with getdate().
    Ex:  where
    getdate()  -  lastdate < 1
    when I use above one I got error like
    Error = Conversion failed when converting date and/or
    time from character string.
    I knew the datatypes for lastdate and getdate() are different...
    how can I use...
    Thanks,
    rup

    You need to convert the string date to datetime or date. See conversion examples here:
    http://www.sqlusa.com/bestpractices/datetimeconversion/
    Example for the where clause:
    WHERE DATEDIFF(DD, convert(datetime, lastdate, 101), getdate() ) < 1
    Can you post sample string dates?
    Are you looking for today's records? Another option (depends on lastdate format):
    WHERE lastdate = convert(char(8), getdate(), 112)
    Kalman Toth Database & OLAP Architect
    SQL Server 2014 Design & Programming
    New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

  • How can I Create an individual MD5 file for each folder in a main directory?

    The specs for a file delivery I'm making require an individual MD5 file per folder, with the contents of that folder being inside the MD5 file. Such as:
    DAY_01 (MAIN FOLDER)
    A01
    -(files 1-1000)
    -md5 for files 1-1000
    A02
    -files 1001-2000
    -md5 for files 1001-2000
    And so on. Is there a script or program that can make those MD5 files automatically or do I hace to go and do each one individually? Thanks

    I don't know of any pre-existing solution to your question, but it isn't hard to write one:
    set theFolder to (choose folder)
    tell application "System Events"
              set subfolders to every folder of theFolder
              repeat with eachFolder in subfolders
                        set fPath to (POSIX path of eachFolder)
                        set fName to name of eachFolder
                        set md5Filename to quoted form of (fName & ".md5")
                        do shell script "cd " & quoted form of fPath & "; /sbin/md5 * > " & md5Filename
              end repeat
    end tell
    The idea here is that it asks for a folder to process. It then grabs a list of all the folders inside that folder (subfolders), then for each subfolder it extracts its POSIX path and the folder name, then it builds a shell command that actually goes to each folder, runs the md5 command (passing in all files), writing the output to a .md5 file named according to the folder.

  • How can I work with WindowsAccessBridge.dll from VB6?

    Hi,
    I have one java application(e.g JAlbum). Whenever I start that application it promt to enter username and password.
    Now what I want to do is?
    I want to get that both text boxs values and set some values of that text boxes with my VB 6.0 code.
    I have found that with help of WindowsAccessBridge.dll we can do something which I want. But they didn't provide any example source code in VB 6.0.
    Can anybody help me that how can I get content of Java Application. How can I use WindowsAccessBridge.dll in my VB project. I can do it for windows application by using IAccesible. But I don't know that how can i do it for Java with WindowsAccessBridge.dll.
    Please provide me some proper steps to work with WindowsAccessBridge.dll in VB 6.0.
    Please help me as soon as possible. If possible please provide me some source code in vb 6 or links.
    Thanks in advance.

    Hi Peter,
    Thanks for your reply.
    I have developed it using VB 6.0. Please check the below code.
    '' General Declaration
    Option Explicit
    Private Declare Function isJavaWindow Lib "WindowsAccessBridge" (Hwnd As Long) As Boolean
    Private Declare Function FreeLibrary Lib "kernel32" (ByVal hLibModule As Long) As Long
    Private Declare Function LoadLibrary Lib "kernel32" Alias "LoadLibraryA" (ByVal lpLibFileName As String) As Long
    Private Declare Function FindWindowEx Lib "user32" Alias "FindWindowExA" (ByVal hwnd1 As Long, ByVal hWnd2 As Long, ByVal lpsz1 As String, ByVal lpsz2 As String) As Long
    Private Declare Function FindWindow _
                    Lib "user32.dll" _
                    Alias "FindWindowA" (ByVal lpClassName As String, _
                                         ByVal lpWindowName As String) As Long
    Private Sub Form_Load()
    Dim Var_g_HwndRec As Long
    Dim lb As Long
    Var_g_HwndRec = FindWindow(vbNullString, "CI for a proportion")
    lb = LoadLibrary("WindowsAccessBridge")
    MsgBox isJavaWindow(Var_g_HwndRec)
    End SubAt the time when I ran this program I got an runtime error "49', bad DLL calling convention.
    Can you please tell me that what could be the problem?

  • How can CEP work with IBM MQ?

    Hi,
    Our customer is using MQ. How can we make the JMS adapter work with it?
    Thanks,

    You need Lightroom 5.5 or later (the most current version is 5.7.1). This is a free update if you have already purchased an earlier version of Lightroom 5.
    Product updates

Maybe you are looking for