How can I work with two images at the same time?

I have downloaded Photoshop Elements 10 and I can not find the buttons for Minimize or Reset for the image. If I rightclick the miniature those options are grey. If I open two images so I have two miniatures in the holder and then go to Windows and Images the option Show Overlapping is grey but I can show Side by side. Then I can only shut down the images.
Thanks for help
Bibbi

Open the Editor and on the menu bar click:
Edit à Preferences à General
Check the box “Allow Floating documents in Full Edit Mode” and click OK.

Similar Messages

Apex mixes applications working with two windows at the same time

Hi all, while developing in Apex I have found the following problem:
Working with two different applications at the same time, the browser goes from one to another indistinctly.
To reproduce the problem:
1. Open the same application builder in two different Firefox windows
2. Open a different application in each window (In my case: application 103 in window1 and application 105 in window2)
3. Go to shared components in both windows (window1 first)
- window1 breadcrumbs show: Home > Application Builder > Application 103 > Shared Components
- window2 breadcrumbs show: Home > Application Builder > Application 105 > Shared Components
4. Click in any shared component in window1 (Templates, Authentication Schemes...)
- window1 breadcrumbs show: Home > Application Builder > Application *105* > Shared Components > Templates (Application 105 instead of 103)
Is it a bug? I have read the known issues [[Here]|http://www.oracle.com/technetwork/developer-tools/apex/downloads/apex402knownissues-189793.html] but it does not appear.
Related Data:
Application Express version 4.0.2.00.07
Firefox 3.6.15
SO: Windows XP
The error is not reproduced with IE7. I have not tested any other browser.
Regards,
Molina

If you tried opening up two pages in the same application each of which modifies the same page items, you would notice the same issue.
This is because, in a session there is only one set of values for page items(or application items) and every parallel call to the same page would update the same bind variables.
Now the development environment or Apex Builder is also an apex application , and when try and open up the pages as you mentioned, they both access the same Application Builder page and sets/resets any existing values for those variables(and maybe cookies too if they are being used) , hence the 'mixing up'.
If that didn't convince you, check the URL of both the pages when you load them, they should show the same page number ( f?p=APP_ID:PAGE_NUMBER syntax). Imagine if the same approach was done with one of your application pages, say an edit form opened from a report with multiple records in multiple tabs like what happened with this case: {message:id=9346663}
So this really isn't a bug in a way, because that is how session states in apex is/was maintained. Ofcourse if they used another kind of development platform for building pages, it may have been avoided, but thats an altogether different point in itself.

3.2.3;Swing app.; Cannot work with two applications at the same time.

Hi guys,
I bring this problem here may somebody experienced that.
I developed two client side applications(applets) with JDev3.2.3.
Locate them on Apache/Tomcat. There is also a
Index.html file with two links, so when user clicks on
each link the associated application will downloaded
on his/her PC and ready to work. (In index.html I used
JavaScript function window.open(…) to load the applications)
Now please see this scenario:
1-I ran/loaded both application in two separate
browsers(IE5.5). And tried to work with them(minimized
one and work with another). Soon I faced unexpected
frizzing/locking or very slow running on both
applications.
2-Then closed/killed one of them(killed IE). Then
re-executed same application again. The application
loaded with the last activated screen . Seems it never
killed and it was still alive.
3- The only way to successfully working is one by one.
Means execute & work with one, then kill that, and
then execute and work with another. Which is not expected
in the Windows enviroment.
To Debug:
When both applications were running(each on it’s own
IE), I opened the Task Manager and saw there was only
one IEXPLORER.EXE was running, also there was only one
Java VM (a little bird icon) on right-bottom of the
screen.
I believe this causes the problem. Seems they both
running in the same session. Since I opened two
applications in two IE I was expected to see two
IEXPLORER.EXE with two JVM. Am I right? Do you think
so?
Any way, Now I am seeking to find the solution. My
primary mind says probably I should not use
window.open(..) in index.html to load the
applications.
Would appreciate any command on this.

Same thing with me! My microphone doesn't even register in anything but ventrilo!
It's dri'ves me NUTS! I bought the card (xfi fatalty) for a really good price, but I almost regret even looking into the soundcard because of this bug. I know Vista is a new operating system..but I figure'd this kind of update should have been noticed MUCH earlier..
Please creative, can you fix this?
On another note..is there a sound quality difference between using an x-fi in vista vs xp?
*not meaning to thread jack*
finally..
you should probably close the other thread.. You made two, you know.

Two images at the same time

Hi!
I'm new into FCE and I would like to ask for some help. Can I work with two images at the same time? I mean, Can I superimpose two images to make one? How can I do it?
Maybe this is something easy, but I'm just starting,
thanks in advance for your answers
Message was edited by: angelcotallo

Yes, you can. You can put one clip on top of the other in the timeline. You can make both clips visible by reducing the opposite of the clip or top, or by scaling back the clips so they are smaller. You can reduce the opacity and scale of the clips in the viewer by opening the clips from the timeline into the viewer. You can also scale the images directly in the canvas when it is in Image+Wireframe mode.

How can I run 2 Dreamweaver windows at the same time?

How can I run 2 Dreamweaver windows at the same time on my
PC?
basically I have 2 monitors and I want to edit CSS on one
monitor and have the html page open on the other so I can quickly
look from one to another with in a split second instead of taking
that extra time to switch back and forth using the tabs at the top,
I know I should probably invest into a mac so i can work out side
of the Dreamweaver application window and I will in the future but
is there any way i can do this on my windows XP pro PC?
Thank you
Maurice

Open the CSS in DW, and use F10 to open the Code Inspector.
Place the
latter as needed.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Random_Yggdrasil" <[email protected]> wrote
in message
news:gi2htb$j4j$[email protected]..
> How can I run 2 Dreamweaver windows at the same time on
my PC?
> basically I have 2 monitors and I want to edit CSS on
one monitor and have
> the
> html page open on the other so I can quickly look from
one to another with
> in a
> split second instead of taking that extra time to switch
back and forth
> using
> the tabs at the top, I know I should probably invest
into a mac so i can
> work
> out side of the Dreamweaver application window and I
will in the future
> but is
> there any way i can do this on my windows XP pro PC?
>
> Thank you
> Maurice
>
>
>

How can i use offline & online database in the same time?

how can i use offline & online database in the same time?
my database in another server when the connection true it connect
but if not does not work
i wanna make offline database if the server not connected it connect offline then the server is on it alter all data from the offline to the server.

User, please tell us your Jdev version!
There is no such functionality build into the framework. The offline data base is only for designing the db, not to have a backup db.
If you can't connect to the db the application will not work.
Timo

How to share iphoto with two users in the same imac maverick

I can´t find the way to share iphoto/itunes with two users in the same imac with maverick software

In conclusion, the new software is worse than the old one, really? Because in my old mac I could share easily without copy with an external USB
It's not iPhoto that dropped the ball but the system. I believe it was Mavericks that broke the Shared folder compatibility for iPhoto, not iPhoto itself.
Also having the library on an external HD is a good way of freeing up space on the boot drive to assure optional system and application performance.

Can I work on two items on the same screen

I currently am working with two monitors so that i can have two items open side by side. Is it possible to do the same with just one Apple monitor?

Yes. Just open two windows which can be side by side.

Can I use one GBIP-Interface with two programs at the same time?

Hi, I have one PCI-GBIP-controller with multiple instruments installed. Now I want to use these instruments with two differents programs at the same time.
E.g.: program 1 uses GPIB0::1 and GPIB0::3
and program 2 uses GPIB0::4 and GPIB0::7
Is this possible??
When I have tried to do this, I always got timeout errors..
Thanx in advance.
Philipp

Hi,
You shouldn't have any problems accessing different devices from different programs using the same interface. I even used the two VIs to communicate with the same device. Although not the best approach, VISA didn't return any errors.
DiegoF.

How to count frequency of two signal at the same time ?

Hello every one
please help me with this one i am really stuck.
The situation   : I have two square wave signal, and i want to measure the frequency of both of themat the same time.
the problem : Error -50103 occurred at DAQmx Read (Counter DBL 1Chan 1Samp).vi:3
Please see the attachement.
i also have 3 analog inputs to be measured.
but i dont have any problem with the analog inputs,,,multiple analog inputs can easily be measured,,,,,but the prob lem is in the digitl (square wave ) signals.
Attachments:
i want to use two counter input.GIF ‏54 KB
two counter tasks1.vi ‏250 KB

NI has an excellent overview of the accuracy and tradeoffs of the different freq measurement methods titled "Making Accurate Frequency Measurements." To boil down the essence of it, the (possibly) increased accuracy of the 2-counter method depends on a relatively long collection / accumulation time which would in turn typically limit the rate at which you could update your measured freq value.
Now let me offer some friendly but blunt advice. LabVIEW makes it easy to collect data. However, there are many other factors affecting the usefulness of that data. I support the dictum: "It is hard to measure *well*."  Choice of sensors, their sensitivity to environment, various sources of noise, an understanding of the decision to be made from the data, programming methods, etc. And even more etc.
What I mean is that just because a hardware freq measurement can be performed that is precise to 1 part per million, it would be very RARE in a test that ALL of those 6 significant digits prove useful. In your app, the measurements are presently only approximately correlated in time. And the gap of blind time between measurements will usually represent a much longer period of time than the measurement itself.
Analogy: suppose you had a 100 minute film at 25 frames/sec for a total of 150_000 frames. Now start selecting individual frames that are separated by some random # of frames between about 200 and 500. In the end, you may end up with a sequence of 400 frames in the correct order. Each individual frame is VERY accurate, but the collection of all of them can zip by in 16 seconds and not give you a much understanding about the movie.
What would usually work out much better is to sacrifice some accuracy in order to collect a greater quantity of frames. You trade off the instantaneous accuracy for the overall coherency.
Sorry, got on a roll...   Back to your question. My own preference is almost always to avoid consuming hardware resources when not truly necessary. I've been toying with counters for many years and have still never once deployed an app using a 2-counter frequency measurement. I do the 1-counter measurement and save the other counter(s) for other purposes.
If you've got an M-series board, the 80 MHz timebase allows you to measure a 500 kHz pulsetrain with a quantization error of only about 0.06% (1 part in 160). There's a pretty fair chance that whatever physical process emits that pulsetrain isn't appreciably more stable than that
-Kevin P.

Using a Dell 2407WFP with two Macs at the same time?

Hi ... I have a Dell Ultrasharp 24" WFP display that I was using with my old G4. Connectivity isn't the issue ... it works beautifully on both the G4 and my new Mini. I've read that I can put the VGA cable on the G4 (no biggie -- it's what I was using before) and I have the DVI on the Mini.
What I want to know is: Can I (and is it wise to) have both machines running at the same time and toggle the display between the two or should I keep one machine off when the other is on? There is a button on the display for toggling between a variety of displays.
I've activated file sharing, etc. on the old box, but there are some things I still can't do unless I'm on the G4 desktop -- mostly my graphic apps. I've been holding off from swapping cables around, but now it's getting to the point that I need to get back on the G4 because of apps that I don't have on the Mini.
I haven't put the VGA cable back on the G4 yet. It seems like it -should- work -- I just need some verification that it will or won't futz up something. I think what I might be most concerned about is that the monitor isn't powerful enough to run both machines at the same time, but I could be wrong.
The info at the Dell site is somewhat dated.
TIA!

I use a KVM switch with a Dell monitor that has DVI and VGA inputs. I only route the K an M portions (keyboard and mouse) through the switch. The computers connect directly via VGA and DVI to the Monitor, and then I use the monitor's switch to make the video switch. Works fine. Don't worry about taxing the monitor.
I'd suggest buying the KVM switch from a vendor with easy return policies, since it can take a few tries to find a model you like.

How Can I generate 2 different WaveForm in the same time

Hello,
I use a NI 6733 card and measurement studio 8 with MFC class.
I would like to generate 2 different waveform in the same time on 2 diffrent analog output channel.
I would like to know how can i do that bescause I succeed to generate one wafeform on one channel but not the second.
I would like to create 2 task one per analog output channel and waveform and launch the task in the same time.
I use the buffer FIFO and I think I have a probleme to share the buffer between the to different channel.
thank you for your attention.

Hello,
This corresponds of the third case detailed in this KnowledgeBase. You have to use one task with two channel, and feed it with your two independant waveforms (at the same sampling rate).
Cordially,
.mrLeft{float:left} .mrInfo{border-left:solid 1px #989898;font-size:x-small;color:#989898}
Mathieu R.
  CTD - Certified TestStand Developer / Développeur TestStand Certifié
  CLAD - Certified LabVIEW Associate Developer

How can I have 2 webpages open at the same time?

With my previous IP I could have 2 websites open at the same time, useful when making comparisons. I'm sure there must be a way to do this with Firefox but I can't find it.

Open the first website you want and then click on "file" and then on "new window." Another window will appear so now you have 2 windows on your screen. Reduce the two windows so that they both fit on your screen. Now click on the edge of either window and then on the book mark of the website you want and that website will appear in that window, and do the same thing on the other window for a different book mark, OR type in a different website name in each of the windows and you will get those websites in the respective windows.
I know...it seems so easy, but I had to ask someone else how to do it too !

How can I sync over itunes and at the same time sync over icloud?

Hello,
I just recently updated my iTunes to the latest version and now run into the following challenge. With the "old" iTunes I was able to sync my Outlook calendar from my company computer over iTunes with my iPhone and my iPad. At the same time I was able to sync my private appointments on my iPhone over iCloud with my iPad. That way my appointments from my company computer appeared in a different color on my mobile devices as my private appointments and everything was fine.
Now, after updating iTunes, I cannot sync my Outlook calendar from my company computer anymore - iTunes is just telling me I choose to sync my calendar over iCloud and leaves me no option anymore to sync "manually" in addition to the iCloud with iTunes.
How can I solve the issue? Basically, how can I sync my company appointments with my iPhone without using iCloud on my company computer?

Hi,
I have the same issue and I can tell that it really *****. Now I have to manually copy cal items to my icloud calendar to have the business cal items on my iphone. have looked into codetwo for icloud which is nice for notes, tasks and contacts but it only works for business cal items which I myself have created not for items for which I was invited. Contacted their support but I think it won't help.
If you have any suggestions how to overcome this problem, I'd be glad if you posted your solution.
Thx in advance
iphone 5, iOS 6.0.1, icloud for windows 2.1, windows 7 64bit

Can psc2510 work connected and wireless at the same time?

My PSC2510 all-in-one is connected to my desktop the old-fashioned way. Can I get my laptop to print wirelessly from the same printer?

I'm pretty sure that USB and wireless connections can work at the same time on this printer. Just make sure the same PC is not connected by both USB and wireless. The software will get "confused" as to which way to communicate with the printer.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

How can I work with two images at the same time?

Similar Messages

Maybe you are looking for