How can I write a text (paragraph, etc.) within a shape?

I know that this should be an easy one, but I have not been able to figure it out. I tried searching the online manual but I have not been able to succeed. I need to write several paragraphs within different shapes (circle, etc.), even personalized shapes. Can any body help? Thanks.

You can do type inside a path and also type along a path.
(sometimes finding stuff in help manual can be tricky cause
it's not always where you expect to find it)
If you use the help application from within photoshop (Help>Photoshop Help)
you can use the search to find stuff.
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-75baa.h tml
Added: just in addition to emil emil's post.
MTSTUNER
Message was edited by: MTSTUNER

Similar Messages

How can I write to text file colorful texts

I save system events in a text file,for example when system give warning message i want to write it red

As others have mentioned, if you want to view text in different colors with an viewer/editor tool outside of LabVIEW, you must provide the necessary formatting for that tool.
If it works for your application to view the file using LabVIEW you can do this:
1) Place a unique key in each line that identifies an error.
2) Display the text in a Listbox and color each line based on that unique key.
You can fairly easily provide a stand alone viewer if needed.
This technique can also be expanded to provide multiple colors.
steve
Help the forum when you get help. Click the "Solution?" icon on the reply that answers your
question. Give "Kudos" to replies that help.

How can I write and read the LPT within JAVA?

Hello!
I'm new to JAVA.
I made a simple JAVA application with few buttons and labels with NetBeans.
I add ActionListener to button but don't know to write the handling code that should to write a byt to the DATA register in the LPT port of the PC box.
From where can I get the code for this, maybe within JDK documentation?
Any advices will be appreciated!
Regards, csPaul

I have ever programmed an LPT data sender using VB.net and inpout32.dll(will be very easy to search using google). for Java, try this:
http://www.geocities.com/Juanga69/parport/
I've just download the sample also, wanna try to...
And some people say that JNI allow us to embedd C++ code within our Java program.. I don't know about this yet...

HT4623 i have updated to ios7 on my iphone 4s but the keybard has become extremely unresponsive and i cant write mails/texts/searched etc without a considerable delay in the text appearing. How can i reinstall ios7????

i have updated to ios7 on my iphone 4s but the keybard has become extremely unresponsive and i cant write mails/texts/searched etc without a considerable delay in the text appearing. How can i reinstall ios7????

litemotiv wrote:Nice entrance Bruce Lee JR, welcome!
Thanks~!! I usually like my presence to be known and not just sit in the dark I wanna become apart of the community~!! Actually, every activity I do, I like to get involved~!!
cybertorture wrote:
wow man, u really enjoy this ? ... well u ll see here many ppl like yr self who feels @ home here after a looooooong distro hopping
well be welcome here and long live ARCH !
LONG LIVE ARCH~!!!!! Hek yeah I enjoy, especially since I was a major power user of XP & strictly XP. There was everything I ever needed. The only thing was that, if there was an Open-Source alternative, I would take it. I didn't know much about Linux other than that it ran EXTREMELY well as a server just as FreeBSD does. Once I finally took the time to google Linux, read about ditributions,open source and read blogs and read community comments etc.. I was like" I gotta be apart of this~!!" because XP was the shizz. But now Linux, more specifically, ARCH~!!!!!

How can i write info in text filefrom servlet

hello
can u give me exmaple how can i write data into text file from servlet ?
Edited by: bla123456789654 on May 17, 2010 2:05 PM

javax.servlet.GenericServlet
public void log(java.lang.String msg)
Writes the specified message to a servlet log file, prepended by the servlet's name.
See ServletContext.log(String).
Parameters:
msg - a String specifying the message to be written to the log file
*/

How Can I write text in color

Simple use for text output is System.out.println("Hallo");
But how Can I write text in different color?

http://www.javaworld.com/javaworld/javaqa/2002-12/02-qa-1220-console.html

How can I create a Text-Input Field in BexAnalyzer for a Planning Function

Hello,
i want to create a pre calculation(contribution accounting) for Materials in BI-Integrated Planning. These Materials aren't in the master data. So I create a new Info Object for pre calculated materials with only a material-number as key and a text-description.
Now I want to write a Exit-Function, which creates new materials in these Info Object. The user should start this function in a planning application in BexAnalyzer. There the user should have the possibility to enter a text-description for the new material. How can I create such a Text-Field in BexAnalyzer and how can I read this text filed in a planning function (exit).
Thanks in advance

Hi Jürgen,
you can create a parameter for this in the exit function and a variable for the parameter. In BEx Analyzer then create a button for the planning function; in the button parameterization use VAR_NAME = , i.e. use an Excel formula here to get the value from an Excel input field.
The command range should be some 'hidden area' in your Excel sheet.
But may be you don't need this. Use a characteristic without master data. Then ensure that that the query uses the option 'key' as display. In new lines you can then enter the key, the system creates a SID on the fly (but the text table will not be updated). In this scenario you may take text also from the key. May be you can update the text table (online or in batch) by simply using function modules from function group RSNDI_MD (not released by SAP).
But observere that the system in BI Planning reads only the active version, i.e. if you change something on the fly the changes may not be visible.
Regards,
Gregor

How can I write into a table cell (row, column are given) in a databae?

How can I write into a table cell (row, column are given) in a database using LabVIEW Database Toolkit? I am using Ms Access. Suppose I have three columns in a table, I write 1st row of 1st column, then 1st row of 3rd column. The problem I am having is after writing the 1st row 1st column, the reference goes to second row and if I write into 3rd column, it goes to 2nd row 3rd column. Any suggestion?
Solved!
Go to Solution.

When you do a SQL INSERT command, you create a new row. If you want to change an existing row, you have to use the UPDATE command (i.e. UPDATE tablename SET column = value WHERE some_column=some_value). The some_column could be the unique ID of each row, a date/time, etc.
I have no idea what function to use in the toolkit to execute a SQL command since I don't use the toolkit. I also don't understand why you just don't do a single INSERT. It would be much faster.

How do I write a text below the Lower Third line, in Adobe Premiere Elements 12?

How do I write a text below the Lower Third line, in Adobe Premiere Elements 12?

Ruth Schreiber
To what Premiere Elements 12 title template (lower 3rd type) are you referring?
It is not clear what you want to do.
a. Are you able to double click the template to open it in the program's Titler?
b. Can you select the present text with the Selection Tool to move it to custom locations?
c. Can you edit the existing text in the template?
The following uses the Aquarium lower 3rd template...where do you want to write text in the template?
We will be looking forward to your follow up.
Thanks.
ATR

How can i make the text go vertically in numbers

How can I make the text vertical in numbers? I have merged the cells and cannot find an option for making it go vertical as opposed to horizontal.

I already gave two tools to fit this kind of needs.
tip #1 :
--{code}
--[SCRIPT write_vertically]
Enregistrer le script en tant que Script : write_vertically.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Bibliothèque:Scripts:Applications :Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Saisir dans une cellule le mot à écrire verticalement puis le sélectionner.
ATTENTION, il ne faut pas sélectionner la cellule mais le mot qui doit apparaitre surligné.
Aller au menu Scripts , choisir Numbers puis choisir “write_vertically”
Le script colle dans la cellule le mot apès avoir inséré un return entre tous les caractères.
Pour mon usage personnel j'associe un raccourci à ce script grace à FastScripts.
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: write_vertically.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
In a cell, type a word to write vertically then select it.
CAUTION, don’t select the cell but the word which must be highlighted.
Go to the Scripts Menu, choose Numbers, then choose “write_vertically”
The script insert in the cell the word after inserting a return between every characters.
For my own use, I link a shortcut to the script thank to FastScripts.
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/12/17
2012/01/01 no longer use a local variable, use result
--=====
on run
Clear the clipboard *)
set the clipboard to ""
Copy the selection in the clipboard *)
          my raccourci("Numbers", "c", "c")
Loop waiting that the clipboard is really filled *)
          repeat
                    try
                              if (the clipboard as text) is not "" then exit repeat
                    on error
                    end try
          end repeat
Extract the clipboard's content *)
the clipboard as text
Insert return between every characters *)
          my recolle(every character of result, return)
Fill the clipboard with the edited string *)
set the clipboard to result
Paste in the cell *)
          my raccourci("Numbers", "v", "cas")
end run
--=====
on recolle(l, d)
          local oTIDs, t
          set oTIDs to AppleScript's text item delimiters
          set AppleScript's text item delimiters to d
          set t to l as text
          set AppleScript's text item delimiters to oTIDs
          return t
end recolle
--=====
on activateGUIscripting()
(* to be sure than GUI scripting will be active *)
          tell application "System Events"
                    if not (UI elements enabled) then set (UI elements enabled) to true
          end tell
end activateGUIscripting
--=====
==== Uses GUIscripting ====
This handler may be used to 'type' text, invisible characters if the third parameter is an empty string.
It may be used to 'type' keyboard raccourcis if the third parameter describe the required modifier keys.
I changed its name « shortcut » to « raccourci » to get rid of a name conflict in Smile.
on raccourci(a, t, d)
          local k
          tell application a to activate
          tell application "System Events" to tell application process a
                    set frontmost to true
                    try
                              t * 1
                              if d is "" then
key code t
                              else if d is "c" then
key code t using {command down}
                              else if d is "a" then
key code t using {option down}
                              else if d is "k" then
key code t using {control down}
                              else if d is "s" then
key code t using {shift down}
                              else if d is in {"ac", "ca"} then
key code t using {command down, option down}
                              else if d is in {"as", "sa"} then
key code t using {shift down, option down}
                              else if d is in {"sc", "cs"} then
key code t using {command down, shift down}
                              else if d is in {"kc", "ck"} then
key code t using {command down, control down}
                              else if d is in {"ks", "sk"} then
key code t using {shift down, control down}
                              else if (d contains "c") and (d contains "s") and d contains "k" then
key code t using {command down, shift down, control down}
                              else if (d contains "c") and (d contains "s") and d contains "a" then
key code t using {command down, shift down, option down}
                              end if
                    on error
                              repeat with k in t
                                        if d is "" then
keystroke (k as text)
                                        else if d is "c" then
keystroke (k as text) using {command down}
                                        else if d is "a" then
keystroke k using {option down}
                                        else if d is "k" then
keystroke (k as text) using {control down}
                                        else if d is "s" then
keystroke k using {shift down}
                                        else if d is in {"ac", "ca"} then
keystroke (k as text) using {command down, option down}
                                        else if d is in {"as", "sa"} then
keystroke (k as text) using {shift down, option down}
                                        else if d is in {"sc", "cs"} then
keystroke (k as text) using {command down, shift down}
                                        else if d is in {"kc", "ck"} then
keystroke (k as text) using {command down, control down}
                                        else if d is in {"ks", "sk"} then
keystroke (k as text) using {shift down, control down}
                                        else if (d contains "c") and (d contains "s") and d contains "k" then
keystroke (k as text) using {command down, shift down, control down}
                                        else if (d contains "c") and (d contains "s") and d contains "a" then
keystroke (k as text) using {command down, shift down, option down}
                                        end if
                              end repeat
                    end try
          end tell
end raccourci
--=====
--[/SCRIPT]
--{code}
tip #2 :
--{code}
--[SCRIPT rotate_cell_contents]
Enregistrer le script en tant que Script : rotate_cell_contents.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner une cellule dont le texte doit être tourné de 90 degrés.
Aller au menu Scripts , choisir Numbers puis choisir “rotate_cell_contents”
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: rotate_cell_contents.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a cell whose contents must be rotated for 90 degrees.
Go to the Scripts Menu, choose Numbers, then choose “rotate_cell_contents”
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/06/23
2011/06/26 -- No longer use an auxiliary text box. Now keep the text attributes.
2012/01/31 -- edited for Lion
--=====
on run
          local dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2
          local le_texte, la_largeur, la_hauteur, myNewDoc
          my activateGUIscripting()
Extract properties of the source/target cell *)
          set {dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
          tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
                    set selection range to range (name of column colNum1 & name of row rowNum1)
          end tell
Cut*)
          my raccourci("Numbers", "x", "c")
Trigger Preview *)
          tell application "System Events"
                    if "Preview" is not in (name of every application process) then launch application "Preview"
          end tell
delay 0.2 -- required
New document from the clipboard *)
          my raccourci("Preview", "n", "c")
Rotate to left *)
          my raccourci("Preview", "l", "c")
Copy *)
          my raccourci("Preview", "c", "c")
Quit *)
          my raccourci("Preview", "q", "c")
          (system attribute "sys2") < 7
          if result then
Click the [Don't Save] button in the warning sheet *)
                    tell application "Preview" to activate
                    tell application "System Events" to tell application process "Preview" to tell window 1
                              name of buttons
                              repeat 50 times
                                        delay 0.1
                                        if exists sheet 1 then exit repeat
                              end repeat
                              tell sheet 1 to click button 2
                    end tell
          end if
Back to Numbers *)
          tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
-- just reset the focus on the table
          end tell
Paste in the cell *)
          my raccourci("Numbers", "v", "c")
end run
--=====
set { dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
on get_SelParams()
          local d_name, s_name, t_name, row_num1, col_num1, row_num2, col_num2
          tell application "Numbers" to tell document 1
                    set d_name to its name
                    set s_name to ""
                    repeat with i from 1 to the count of sheets
                              tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
                              if maybe is not 0 then
                                        set s_name to name of sheet i
                                        exit repeat
                              end if -- maybe is not 0
                    end repeat
                    if s_name is "" then
                              if my parleAnglais() then
                                        error "No sheet has a selected table embedding at least one selected cell !"
                              else
                                        error "Aucune feuille ne contient une table ayant au moins une cellule sélectionnée !"
                              end if

How can i write the floats value in Unitronics vision230 plc using modbus Ethernet

How can i write the Float value in unitronics Vision230 PLC usinsg modbus ethernet (MB Ethernet Master Query.vi) I read and write the 32 bit register, for e.g i want to write the 23.45 value on 2nd add. of MF. And MF register is 32 bit register. I read and write the 32 bit register.
Narendra.
Solved!
Go to Solution.

Thanks Amit for your solution but i can not use the string to write the value because MB Ethernet master Query.vi only accepet the integer value its not take string values or any other i.e floats values etc.....otherwise i have no problem to write or read the 32 bit register values , only problem is that the MB Ethernet master Query.vi only accept the integer value there4 how can write the float value.
Narendra
Message Edited by Artemistech on 01-30-2009 11:06 PM

How can I write bits through the COM1 serial port?

I'm trying to write bits through the serial port COM1.
Labview "Write VI" only writes everything in string. It seems. How can I write bit by bit through COM1?
Thank you,
Van

Serial transmission (COM port) protocol requires sending a group of bits at one time. You cannot just send one bit. Standard COM port settings must be either 7 or 8 data bits, 1 or 2 stop bits, etc... You have to group your bits 7 or 8 at a time. You could probably send a 0 byte or a 1 byte. This would be like sending 0000 0000 for a low bit and 0000 0001 for a high bit. Your receiving end would have to know how to interpret what you are sending if you choose this method. Of course you have to convert your byte into a string before sending to COM port. Wire a U8 data type to a Build Array input. Then wire the array output to a Byte Array to String input. The output of this function will be the character representation of your byte suitable for sending acr
oss a serial port.
- tbob
Inventor of the WORM Global

How can I write mathematical formulas?

How can I write mathematical formulas?
I tried tu use the formula editor of ms word with paste and copy but it didnt work, because the formula
was not in line with the text.

I was able to use Word's equation editor; just type in the formula and copy it into the Pages document.
I've heard you can do the same thing with the equation bar in Grapher utility, but I haven't tried that.
Other options involve LaTeX, which is a typesetting program. I've looked at that but haven't really explored it.

How can i write a Pl/sql Programme for a calender

hi all,
How can i write Pl/sql programme (may be function) for a calendar ,like after the programme is created if call the function at the prompt and give the year 2099 so on, it should display the result with all the 12 months (months and days.)
Please email the answer to
[email protected]
or send the link for the answers.
Thx

Well, you can start off by reviewing the SYSDATE command and the TO_DATE and TO_CHAR functions. Also, review addmonths etc.
http://www.unix.org.ua/orelly/oracle/prog2/ch14_01.htm
Cheers

How can I write a script for set left indent?

In three cases as below:
for example:
left indent:8mm; first indent:0mm
left indent:0mm; first indent:8mm
left indent:8mm; first indent:-8mm
How can I write a script to tell Indesign, wherever the text indent is, each time when I run the script once, the text can put just a step rightward, and “one step = 8mm”.
Please!

Hi, Trevor
I use change by list as below:
grep {leftIndent:48mm} {leftIndent:56mm}
grep {leftIndent:40mm} {leftIndent:48mm}
grep {leftIndent:32mm} {leftIndent:40mm}
grep {leftIndent:24mm} {leftIndent:32mm}
grep {leftIndent:16mm} {leftIndent:24mm}
grep {leftIndent:8mm} {leftIndent:16mm}
grep {firstLineIndent:8mm, leftIndent:48mm} {firstLineIndent:8mm, leftIndent:56mm}
grep {firstLineIndent:8mm, leftIndent:32mm} {firstLineIndent:8mm, leftIndent:48mm}
grep {firstLineIndent:8mm, leftIndent:24mm} {firstLineIndent:8mm, leftIndent:32mm}
grep {firstLineIndent:8mm, leftIndent:16mm} {firstLineIndent:8mm, leftIndent:24mm}
grep {firstLineIndent:8mm, leftIndent:8mm} {firstLineIndent:8mm, leftIndent:16mm}
grep {firstLineIndent:-8mm, leftIndent:48mm} {firstLineIndent:-8mm, leftIndent:56mm}
grep {firstLineIndent:-8mm, leftIndent:32mm} {firstLineIndent:-8mm, leftIndent:48mm}
grep {firstLineIndent:-8mm, leftIndent:24mm} {firstLineIndent:-8mm, leftIndent:32mm}
grep {firstLineIndent:-8mm, leftIndent:16mm} {firstLineIndent:-8mm, leftIndent:24mm}
grep {firstLineIndent:-8mm, leftIndent:8mm} {firstLineIndent:-8mm, leftIndent:16mm}
but not that perfect,
I want to useing jave "if{}" or "for{}" to write this script, but I don't kown the syntext.

How can I write a text (paragraph, etc.) within a shape?

Similar Messages

Maybe you are looking for