How can i write and show RTL Html in DW CC 2014
hi
when i install adobe dreamwaver cc 2014 , i set the language to arabic ... but when i lunch a html file that have many many arabic and persian words (sentence) it's shows them incorrect
for example if arabic = english
" i'm Hossein "
but dw shows it " Hossein I'm "
How can i fix this?!
thanks
Try adding the following to the top of the style sheet
p, h1, h2, h3, h4, h5 {
direction: rtl;
Ben I'm
Similar Messages
-
How can i write and read the same data
hi,
i have attached my program to this mail. i have some problems in this program.
problems:
1. I want to select the threshold for the rms,varience and s.d.
But what i used is not doing that. i want to fix the upper threshold value and lower threshold value.
when ever the input crosses upper threshold value i want the output and it will remains uptill the value above the lower threshold value.
Once it come down the lower threshold value the output should be stopped.
2. I want to write this in to a file and i want to read this file. is this possible or not.
please try to help me i am very new with lab view6i
REGARDS
CHAMARTHY KOMAL DILEEP.
[email protected]
Attachments:
dileep.vi 93 KBThe easiest way to perform a certain action (such as file I/O) based on a certain condition (such as whether a value has passed a certain threshold) is to use a comparison VI in combination with a case structure. Then you can specify that if your rms, standard deviation and variance are above a threshold then perform a certain action.
Also consider using shift registers to keep track of data from the last loop. If I understand you correctly, you want to start logging data when an upper threshold has been passed. Then you want to continue logging data until a lower threshold is passed. I have attached a non-functional but explanatory VI that will help explain how to implement logic to that effect. It also demonstrates that you can indeed write and read from the same file in a loop. The best way to do this is to open the file before the loop, do all the necessary writing and reading in the loop, and then close the file after the loop.
Hope this helps!
Jarrod S.
National Instruments
Attachments:
dileep_example.vi 61 KB -
How can I write and read the LPT within JAVA?
Hello!
I'm new to JAVA.
I made a simple JAVA application with few buttons and labels with NetBeans.
I add ActionListener to button but don't know to write the handling code that should to write a byt to the DATA register in the LPT port of the PC box.
From where can I get the code for this, maybe within JDK documentation?
Any advices will be appreciated!
Regards, csPaulI have ever programmed an LPT data sender using VB.net and inpout32.dll(will be very easy to search using google). for Java, try this:
http://www.geocities.com/Juanga69/parport/
I've just download the sample also, wanna try to...
And some people say that JNI allow us to embedd C++ code within our Java program.. I don't know about this yet... -
How can I write HTML code in this forums
Sorry but I didn't know where to post this thread.....
How can I write HTML code in this forums?Hello,
Every piece of code in your post should be wrapped with the forum tags [ code] and [ /code], without the blanks.
In case of the <a> tag, that is not enough. In this case, you have several options. The most elegant one is to use the entity name for the less-then sign - & lt; - without any spaces. Other options is to add a space between the less-then and the ‘a’ character (and make a note of it) or change the less-then character with a left bracket one.
When posting code, you should always use the forum preview option, just to make sure the forum software “understood” your code correctly.
Hope this helps,
Arie. -
Hello!
I want to write 1 digital port from PXI-6536 with streaming to TDMS file.
I'm writing by 'DAQmx Configure Logging.vi' and become TDMS file with 8 boolean channels.
How can I write to 1integer channel?
Attachments:
1.JPG 27 KBHey Atrina,
The actual data stored on disk is just the raw data (that is, a byte per sample in your case). It's really just a matter of how that data is being represented in LabVIEW whenever you read back the TDMS file.
I'm not sure if there is a better way to do this, but here is a way to accomplish what you're wanting:
Read back the TDMS file as a digital waveform. Then there's a conversion function in LabVIEW called DWDT Digital to Binary. This function will convert that set of digital channels into the "port format" that you're wanting. I've attached an example of what I mean.
Note: When looking at this VI, there are a few things that the downgrade process did to the VI that I would not recommend for these TDMS files. It added a 1.0 constant on the TDMS Open function, and it set "disable buffering" on the TDMS Open function to false; you can get rid of both of those constants.
Message Edited by AndrewMc on 01-27-2010 11:21 AM
Thanks,
Andy McRorie
NI R&D
Attachments:
digitalconvert.vi 13 KB -
I am connecting an external USB HDD and I can see it on my Apple Macbook Air. BUT this drive is READ only. How can I write to it?
Drive Partition and Format
1.Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive. -
How can we write the code for opening the command prompt and closing the
how can we write the code in java for opening the command prompt and closing the cmd prompt from eclipse (cmd prompt should close when click on the turminate button in eclipse)
rakeshsikha wrote:
how can we write the code for opening the command prompt and closing theBy typing in Eclipse (which you seemingly have)? -
How can I read and write text in rings that are inside an array?
Hello All!!!
How can I read and write text in rings that are inside an array?
Regards and thanks in advance.Use a Property Node linked to the Ring inside the array.
Of course, all elements in the array will have the same text values.
B-)
Message Edited by LabViewGuruWannabe on 12-13-2007 09:47 AM
Message Edited by LabViewGuruWannabe on 12-13-2007 09:48 AM
Message Edited by LabViewGuruWannabe on 12-13-2007 09:49 AM
Attachments:
Strings-BD.PNG 17 KB
Strings-FP1.PNG 23 KB -
I configurated mi ipad in spanish and I can't write a semi-colon, because instead of a semi-colon, it writes our letter ñ. How can I write a semi-colon?
Let's synchronize...
I'm using an iPad 2 running iOS 4.3.2.
Use Settings > General > Keyboard > International Keyboards > Add New Keyboard > Spanish.
Touch Spanish > QWERTY-Spanish (Software Keyboard Layout) > Spanish (Hardware Keyboard Layout).
Are you still with me?
Go to your application where you want to use the new keyboard and select the keyboard "Español" by touching and holding the key with the globe on it.
Now, touch and hold the comma.
What do you see? -
How can I pick and choose what IMAP folders are show in Mail?...
I am using IMAP and it works fine. Except "Sent" messages are saving on the server to "Send Messages" however I cannot see it on the list of IMAP folders in Mail. I see other folders, Save, etc. ones I created, just can't make the folder on the server show up in Mail.
If I go into the "Account Info" window in Mail, it does not show it either. Even though it is on the server and Mail is saving sent messages to it as it should.
Any ideas? How can I pick and choose what IMAP folders are show in Mail?
Thanks
FrankYes it is using the sent mailbox but just does not show it. MS Mail on Vista has a "show/hide" IMAP folder screen, I wish Mac Mail has this..would be perfect.
I was thinking about deleting the account, and adding it, that would reset it I am sure. However I have my mail set to keep a copy locally for off-line viewing (option in preferences under Account) and I get the sense that if I delete the IMAP account and add it, it will download a copy of each piece of mail (for example my inbox) again and I will have two of everything. Does this make sense? Do you think this will happen?
Frank -
How can i write properties file for Hindi font
Hi All,
i'm using jdev 11.1.1.5.0
in my use case i have worked on internationalization where i want to use hindi font
like this link -
Majid Hussain: Internationalization of ADF 11.1.1.3 Applications
as in above post majid used german language and write properties file for german language(which is using english character).
but my problem is that i want to use hindi language
so how can i write propery file which support hindi font.
ManishHi Manish,
We also had same requirement where we need to show indian local language(Hindi ,Bengali and many more ).
We had implemented following approach and perhaps it will helpful for you.
1-First we changed the encoding value in jdeveloper.
go to jdeveloper --> tools --->preference-->encoding , select to UTF8
2-We used to get the properties and it's translated value from business and then we were manually put these pair into related resource bundle.
And using this we were able to implemented multilanguage support.
Thanks
Prateek -
How can I write relative path in File, ImageIcon objects
I have downloaded examples from
http://java.sun.com/docs/books/tutorial/uiswing/components/example-swing/index.html
but for some reason images are invisible until I write absolute paths?(I use windows) How can I write relative path in File, ImageIcon objects?Hello;
I've found a lot of complaints about this through the Forte forum as well as on Dejanews. I'm just curious as to whether any of you ended up finding a solution to this problem.
There was one posting about setting up the subdirectory as a URL rather than a String and then using that as the source of the ImageIcon ... but this didn't work for me.
Any help whatsoever would be appreciated.
Thanks! -
How can I write a tree report?
How can I write a tree report? If you have any document/ link can you please send that.
Regards,
SubhasishREPORT zdemo_alv_tree.
Demo program prepared for ****************
CLASS cl_gui_column_tree DEFINITION LOAD.
CLASS cl_gui_cfw DEFINITION LOAD.
DATA tree1 TYPE REF TO cl_gui_alv_tree_simple.
INCLUDE <icon>.
INCLUDE bcalv_simple_event_receiver.
DATA: gt_sflight TYPE sflight OCCURS 0, " Output-Table
gt_fieldcatalog TYPE lvc_t_fcat, " Field Catalog
gt_sort TYPE lvc_t_sort, " Sorting Table
ok_code LIKE sy-ucomm. " OK-Code
END-OF-SELECTION.
CALL SCREEN 100.
*& Form BUILD_FIELDCATALOG
This subroutine is used to build the field catalog for the ALV list
FORM build_fieldcatalog.
get fieldcatalog
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = 'SFLIGHT'
CHANGING
ct_fieldcat = gt_fieldcatalog.
change fieldcatalog
DATA: ls_fieldcatalog TYPE lvc_s_fcat.
LOOP AT gt_fieldcatalog INTO ls_fieldcatalog.
CASE ls_fieldcatalog-fieldname.
WHEN 'CARRID' OR 'CONNID' OR 'FLDATE'.
ls_fieldcatalog-no_out = 'X'.
ls_fieldcatalog-key = ''.
WHEN 'PRICE' OR 'SEATSOCC' OR 'SEATSMAX' OR 'PAYMENTSUM'.
ls_fieldcatalog-do_sum = 'X'.
ENDCASE.
MODIFY gt_fieldcatalog FROM ls_fieldcatalog.
ENDLOOP.
ENDFORM. " BUILD_FIELDCATALOG
*& Form BUILD_OUTTAB
Retrieving the data from the table and filling it in the output table
of the ALV list
FORM build_outtab.
SELECT * FROM sflight INTO TABLE gt_sflight.
ENDFORM. " BUILD_OUTTAB
*& Form BUILD_SORT_TABLE
This subroutine is used to build the sort table or the sort criteria
FORM build_sort_table.
DATA ls_sort_wa TYPE lvc_s_sort.
create sort-table
ls_sort_wa-spos = 1.
ls_sort_wa-fieldname = 'CARRID'.
ls_sort_wa-up = 'X'.
ls_sort_wa-subtot = 'X'.
APPEND ls_sort_wa TO gt_sort.
ls_sort_wa-spos = 2.
ls_sort_wa-fieldname = 'CONNID'.
ls_sort_wa-up = 'X'.
ls_sort_wa-subtot = 'X'.
APPEND ls_sort_wa TO gt_sort.
ls_sort_wa-spos = 3.
ls_sort_wa-fieldname = 'FLDATE'.
ls_sort_wa-up = 'X'.
APPEND ls_sort_wa TO gt_sort.
ENDFORM. " BUILD_SORT_TABLE
*& Module PBO OUTPUT
This subroutine is used to build the ALV Tree
MODULE pbo OUTPUT.
IF tree1 IS INITIAL.
PERFORM init_tree.
ENDIF.
SET PF-STATUS 'ZSTATUS'.
ENDMODULE. " PBO OUTPUT
*& Module PAI INPUT
This subroutine is used to handle the navigation on the screen
MODULE pai INPUT.
CASE ok_code.
WHEN 'EXIT' OR 'BACK' OR 'CANC'.
PERFORM exit_program.
WHEN OTHERS.
CALL METHOD cl_gui_cfw=>dispatch.
ENDCASE.
CLEAR ok_code.
ENDMODULE. " PAI INPUT
*& Form exit_program
free object and leave program
FORM exit_program.
CALL METHOD tree1->free.
LEAVE PROGRAM.
ENDFORM. " exit_program
*& Form register_events
Handling the events in the ALV Tree control in backend
FORM register_events.
define the events which will be passed to the backend
DATA: lt_events TYPE cntl_simple_events,
l_event TYPE cntl_simple_event.
define the events which will be passed to the backend
l_event-eventid = cl_gui_column_tree=>eventid_node_context_menu_req.
APPEND l_event TO lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_item_context_menu_req.
APPEND l_event TO lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_header_context_men_req.
APPEND l_event TO lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_expand_no_children.
APPEND l_event TO lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_header_click.
APPEND l_event TO lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_item_keypress.
APPEND l_event TO lt_events.
CALL METHOD tree1->set_registered_events
EXPORTING
events = lt_events
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
illegal_event_combination = 3.
set Handler
DATA: l_event_receiver TYPE REF TO lcl_tree_event_receiver.
CREATE OBJECT l_event_receiver.
SET HANDLER l_event_receiver->on_add_hierarchy_node
FOR tree1.
ENDFORM. " register_events
*& Form build_header
build table for header
FORM build_comment USING
pt_list_commentary TYPE slis_t_listheader
p_logo TYPE sdydo_value.
DATA: ls_line TYPE slis_listheader.
LIST HEADING LINE: TYPE H
CLEAR ls_line.
ls_line-typ = 'H'.
LS_LINE-KEY: NOT USED FOR THIS TYPE
ls_line-info = 'ALV TREE DEMO for ****************'.
APPEND ls_line TO pt_list_commentary.
p_logo = 'ENJOYSAP_LOGO'.
ENDFORM. "build_comment
*& Form init_tree
Building the ALV-Tree for the first time display
FORM init_tree.
PERFORM build_fieldcatalog.
PERFORM build_outtab.
PERFORM build_sort_table.
create container for alv-tree
DATA: l_tree_container_name(30) TYPE c,
l_custom_container TYPE REF TO cl_gui_custom_container.
l_tree_container_name = 'TREE1'.
CREATE OBJECT l_custom_container
EXPORTING
container_name = l_tree_container_name
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5.
create tree control
CREATE OBJECT tree1
EXPORTING
i_parent = l_custom_container
i_node_selection_mode =
cl_gui_column_tree=>node_sel_mode_multiple
i_item_selection = 'X'
i_no_html_header = ''
i_no_toolbar = ''
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
illegal_node_selection_mode = 5
failed = 6
illegal_column_name = 7.
create info-table for html-header
DATA: lt_list_commentary TYPE slis_t_listheader,
l_logo TYPE sdydo_value.
PERFORM build_comment USING
lt_list_commentary
l_logo.
repid for saving variants
DATA: ls_variant TYPE disvariant.
ls_variant-report = sy-repid.
register events
PERFORM register_events.
create hierarchy
CALL METHOD tree1->set_table_for_first_display
EXPORTING
it_list_commentary = lt_list_commentary
i_logo = l_logo
i_background_id = 'ALV_BACKGROUND'
i_save = 'A'
is_variant = ls_variant
CHANGING
it_sort = gt_sort
it_outtab = gt_sflight
it_fieldcatalog = gt_fieldcatalog.
expand first level
CALL METHOD tree1->expand_tree
EXPORTING
i_level = 1.
optimize column-width
CALL METHOD tree1->column_optimize
EXPORTING
i_start_column = tree1->c_hierarchy_column_name
i_end_column = tree1->c_hierarchy_column_name.
ENDFORM. " init_tree -
How can I buy tv shows from Jordanian iTunes store?
how can I buy tv shows from Jordanian iTunes store?
I have used a local visa card and I cannot buy movies or tv shows on Apple TV as I get a message saying that I have to buy them from the Jordanian iTunes store!!It does seem a bit off that the rules are that stringent....
This is not a decision made by Apple.
It is made by the copyright holding music or television companies and is part of the contract with the recording artist or program producer. They make the decision as to what territories are distributed to and what territories are left out. -
How can I find and eliminate duplicates in iTunes 11?
I can't seem to find the "Find exact duplicates" item in the File Menu in version 11. How can I find and deal with duplicates?
Shift-View-Show Exact Duplicates should reveal them. Keep one of each repeated group of files and don't send to the recycle bin unless you are sure that there are multiple files on the disc as opposed to multiple entries to the same file.
There is also my DeDuper script if you don't want to do it by hand. This can preserve ratings, play counts, playlist membership, etc. which are lost in a manual clean up. Please take note of the warning to backup your library before deduping. See this thread for background on deduping and the script.
tt2
Maybe you are looking for
-
I purchased Pages as an online download after my 30-day trial expired. I DO have Pages now on my computer, but every time I try to print or save I get a message that says I can't do that until I purchase Pages because I have an expired trial copy. Wh
-
where can i download quicktime 7.5.5? A compatibility version gets downloaded but its not what I need. Im unable to open my ITUNES without the quicktime 7.5.5 upgrade or higher. Anything higher isnt supported by my mac ( OS X 10.5)
-
Reinstall mountain lion form osx recovery
I have a mac book air 11" (purchased in feb 2012 ), when I try to reinstall mountain lion from the osx recovery disk during boot ,It gives me an error saying you have to sign in with the id that was used to purchase lion. But my air came pre-installe
-
Give me the sql lines please for the following
This is the table empCode name managerID 1 aaaa 0 2 bbbb 1 3 cccc 2 4 dddd 2 5 eeee 1 6 ffff 2 7 gggg 4 8 hhhh 3 9 jjjj 3 I want to list the records by levels like the manager and the employee those coming under him thanks in advance param
-
"Built in Microphone" not an option in iMovie
Hi, I'm trying to record a voiceover on iMovie using the built in microphone on my MacBook Pro. However, the only option they are giving me is "Built in Input". I've checked built in mic on my system preferences but they are just not letting me have