How can i write the bellow code using field symbols

data : it_mara type table of mara.
select * from mara
            into it_mara.
delete it_mara where matnr = '100-100'
                         and meins = 'KG'.
if i do the same by using field symbols
i am getting data into <it_mara>
but
delete <it_mara> where matnr = '100-100'
                           and    meins = 'KG'.
is showing syntax error
how to correct the error ?

I think, DELETE does not allows to dynamically define the logical expression for the WHERE clausule.
Have you tried by filtering data in SELECT statement??
Something like:
if dataBase = 'MARA'.
append 'MATNR <> '100-100'' to Itab_Where[].
append 'AND MEINS <> 'KG'' to Itab_Where[].
endIf.
select * from (dataBase) where (Itab_Where) into table <my_table>.
this is possible, but I don't know if this fits your requirements.

Similar Messages

How can i write the below code using "For all entries"

Hi
How can we write the below code using "for all entries" and need to avoid joins...
Please help
SELECT aaufnr aobjnr aauart atxjcd a~pspel
agstrp awerks carbpl cwerks
INTO TABLE t_caufv
FROM caufv AS a
INNER JOIN afih AS b
ON aaufnr = baufnr
INNER JOIN crhd AS c
ON bgewrk = cobjid
AND c~objty = 'D'
WHERE ( a~pspel = space
OR a~txjcd = space
OR NOT a~objnr IN
( select OBJNR from COBRB AS e
WHERE objnr = a~objnr ) )
AND a~werks IN s_plant
AND a~auart IN s_wtype
AND NOT a~objnr IN
( select OBJNR from JEST AS d
WHERE objnr = a~objnr
AND ( dstat = 'A0081'OR dstat = 'A0018' )
AND d~inact 'X' ).
Reward points for all helpfull answers
Thanks
Ammi.

Hi,
SELECT objnr objid aufnr
        from afih
        into table t_afih.
SELECT objnr
        from JEST
        into table t_JEST
        where stat = 'A0045'
           OR stat = 'A0046'
           AND inact 'X'.
SELECT objnr
        from COBRB
        into table t_cobrb.
SELECT arbpl werks objid objty
      from crhd
      INTO table it_crhd
      FOR ALL ENTRIES IN it_afih
      WHERE objty eq 'D'
      AND gewrk = it_afih-objid.
SELECT aufnr objnr auart txjcd pspel gstrp werks aufnr
        FROM caufv
        INTO table t_caufv
        FOR ALL ENTRIES IN it_afih
        WHERE aufnr = it_afih-aufnr
          And pspel = ' '
          AND txjcd = ' '
         ANd objnr ne it_crhd-objnr
          AND auart in s_wtype
          AND werks in s_plant.
         AND objnr ne it_jest-objnr.
dont use NE in the select statements, it may effect performance also. Instead use if statements inside
loops.
loop at t_caufv.
read table it_chrd............
if t_caufv-objnr ne it_chrd-objnr.
read table it_jest..........
   if   if t_caufv-objnr ne it_jest-objnr.
    (proceed further).
   endif.
endif.
endloop.
hope this helps.
Reward if useful.
Regards,
Anu

How can I write the analogous code to the logic:iterate tag functionality

Hai This is Rayalu .And I am very new to the Java World. I have a doubt?.How can I write the analogous code to the<logic:iterate> tag functionality using the JSP Tag Libraries . Pleae Send me some examples .

Hi,
SELECT objnr objid aufnr
        from afih
        into table t_afih.
SELECT objnr
        from JEST
        into table t_JEST
        where stat = 'A0045'
           OR stat = 'A0046'
           AND inact 'X'.
SELECT objnr
        from COBRB
        into table t_cobrb.
SELECT arbpl werks objid objty
      from crhd
      INTO table it_crhd
      FOR ALL ENTRIES IN it_afih
      WHERE objty eq 'D'
      AND gewrk = it_afih-objid.
SELECT aufnr objnr auart txjcd pspel gstrp werks aufnr
        FROM caufv
        INTO table t_caufv
        FOR ALL ENTRIES IN it_afih
        WHERE aufnr = it_afih-aufnr
          And pspel = ' '
          AND txjcd = ' '
         ANd objnr ne it_crhd-objnr
          AND auart in s_wtype
          AND werks in s_plant.
         AND objnr ne it_jest-objnr.
dont use NE in the select statements, it may effect performance also. Instead use if statements inside
loops.
loop at t_caufv.
read table it_chrd............
if t_caufv-objnr ne it_chrd-objnr.
read table it_jest..........
   if   if t_caufv-objnr ne it_jest-objnr.
    (proceed further).
   endif.
endif.
endloop.
hope this helps.
Reward if useful.
Regards,
Anu

How can I use a SCH-LC11 device in CHINA which bought from ebay. I am not Verizon customer but I prefer to using your 4G LTE Router . How can I get the unlock code? The device may have a bad ESN but I only use it in CHINA. Kindly looking forward your repl

How can I use a SCH-LC11 device in CHINA which bought from ebay. I am not Verizon customer but I prefer to using your 4G LTE Router . How can I get the unlock code? The device may have a bad ESN but I only use it in CHINA. Kindly looking forward your reply. Thanks!

It's good to read Antoniad's post. It reassures me that I can use my new iPad as an international communication device which is the reason I purchased the thing. However, I called Verizon today (my provider of cellular data) who told me that I can't just pop in a SIM card as you suggested. He also said that he was from the "Pre-Pay" division of Verizon and he was certain that I couldn't do what I planned to do. I was extremely disappointed as I had called Apple prior to buying the iPad and I read the algorhythm on the website for choosing an iPad before purchasing. Those sources were quite specific and the information seemed clear. I would be able to use my iPad to communicate through cellular connections while traveling on the road, literally, abroad. I was told that I could pop in a data card wherever I was, just as you indicated in your message above, and voila I was good to go. The Verizon rep definitively rained on that parade, but said that I might be able to do this if I have a "Post-Pay" account, a different area of Verizon. I haven't had the chance to talk to this division yet, so I looked to Apple's Support for answers. Maybe I will find out that I can use my iPad as an international communication device while traveling on the road afterall, however, it appears I may need a different type of account (Post-Pay), something I was never warned about. Can I switch to this kind of account? I don't know. I have to find out. If you have any information about this issue, it would be good to share since I strongly suspect there are others who bought the iPad for the same purpose that I have.

How can we write the code for opening the command prompt and closing the

how can we write the code in java for opening the command prompt and closing the cmd prompt from eclipse (cmd prompt should close when click on the turminate button in eclipse)

rakeshsikha wrote:
how can we write the code for opening the command prompt and closing theBy typing in Eclipse (which you seemingly have)?

How can i write the floats value in Unitronics vision230 plc using modbus Ethernet

How can i write the Float value in unitronics Vision230 PLC usinsg modbus ethernet (MB Ethernet Master Query.vi) I read and write the 32 bit register, for e.g i want to write the 23.45 value on 2nd add. of MF. And MF register is 32 bit register. I read and write the 32 bit register.
Narendra.
Solved!
Go to Solution.

Thanks Amit for your solution but i can not use the string to write the value because MB Ethernet master Query.vi only accepet the integer value its not take string values or any other i.e floats values etc.....otherwise i have no problem to write or read the 32 bit register values , only problem is that the MB Ethernet master Query.vi only accept the integer value there4 how can write the float value.
Narendra
Message Edited by Artemistech on 01-30-2009 11:06 PM

How can i write the data to PIC16F819 using labview?

how can i write the data to PIC16F819 using labview?
Need help!
im using labview in gathering the datas that i need to right to the PIC, then after getting all the datas i am using another program which is ICD2 in order to write it to the PIC. Is it possible to do this task through LV? coz we are spending a lot of time transferring the data from LV to ICD2 manually and its prone to mistake as well.
any suggestion?
thanks,
Pedz

LabVIEW does not currently have a built-in method to communicate with
i2c, but there are other vendors that sell devices to communicate in
this manner with LabVIEW development kits. One that I know of is
from MCC... here is a link: http://www.mcc-us.com
They sell a device called iPort, and then you can buy LabVIEW VIs to go with it. I hope this is helpful to you!
john m

How can we know the return code of BDC Program ?

Hi All,
Please tell me : How can we know the return code of BDC Program when being exceuted in Session or in Transaction mode.
In my program, we are uploading data from Excel sheet to SAP via BDC
The records that are not updated we want to create a log file.
Now to know whether a record is updated ot not, wat syst field shloud be used?
Its urgent....
<b>Reward Point will be there ....</b>
Thanks,
Harish

Hi harish,
try the logic in this code ...
i had attached input file in the end.
TYPES: begin of errmess,
        msgnr type t100-msgnr,
        text type t100-text,
       end of errmess.
TABLES : t100.
DATA: BEGIN OF DD_VA01,
       AUART TYPE VBAK-AUART,
       KUNNR TYPE RV45A-KUNNR,
       BSTKD TYPE VBKD-BSTKD,
       MABNR TYPE RV45A-MABNR,
       KWMENG(2) type C,
       KBETR(2) type C,
      END OF DD_VA01.
DATA:IT_VA01     Like TABLE OF DD_VA01,
     WA_VA01     Like LINE OF IT_VA01,
     WA_VA01_F   Like LINE OF IT_VA01,
     IT_BDCDATA TYPE TABLE OF BDCDATA,
     WA_BDCDATA Like Line OF IT_BDCDATA,
     W_FNAME     TYPE STRING,
     messtab like bdcmsgcoll occurs 0 with header line,
     it_errmess type table of errmess,
     wa_errmess like line of it_errmess,
     err_message type string.
data: zf1 type i,
      zc1 type c value '2',
      fn(20) type c.
Main Code ************************************************************
PERFORM get_input using 'C:\Documents and Settings\ic881592\Desktop\Daran_bdc_VA01-e.txt'.
SORT IT_VA01 BY AUART KUNNR BSTKD.
LOOP AT IT_VA01 INTO WA_VA01.
if WA_VA01_F-AUART <> WA_VA01-AUART OR
     WA_VA01_F-KUNNR <> WA_VA01-KUNNR OR
     WA_VA01_F-BSTKD <> WA_VA01-BSTKD.
       PERFORM set_header_flag.
       PERFORM create_bdc_header_data.
endif.
PERFORM create_bdc_item_data.
ENDLOOP.
PERFORM call_transaction.
PERFORM errorlog.
Procedures ***********************************************************
form get_input using w_fname.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME            = W_FNAME
      HAS_FIELD_SEPARATOR = '#'
    TABLES
      DATA_TAB            = IT_VA01.
endform.
form call_transaction.
    PERFORM bdc_field       using 'BDC_OKCODE' '/11'.
    CALL TRANSACTION 'VA01' USING IT_BDCDATA MODE 'A' messages into messtab.
    refresh it_bdcdata.
endform.
FORM set_header_flag.
       WA_VA01_F-AUART = WA_VA01-AUART.
       WA_VA01_F-KUNNR = WA_VA01-KUNNR.
       WA_VA01_F-BSTKD = WA_VA01-BSTKD.
       if zf1 = 1.
           PERFORM call_transaction.
       endif.
       zf1 = 1.
endform.   "set_header_flag.
form create_bdc_header_data.
     perform bdc_dynpro      using 'SAPMV45A' '0101'.
     perform bdc_field       using 'VBAK-AUART' WA_VA01-AUART.
     perform bdc_field       using 'BDC_OKCODE' '/00'.
     perform bdc_dynpro      using 'SAPMV45A' '4001'.
     perform bdc_field       using 'KUAGV-KUNNR' WA_VA01-KUNNR.
     perform bdc_field       using 'VBKD-BSTKD' WA_VA01-BSTKD.
     perform bdc_field       using 'BDC_OKCODE' '/00'.
     perform bdc_dynpro      using 'SAPMSSY0' '0120'.
     perform bdc_field       using 'BDC_CURSOR' '04/06'.
     perform bdc_field       using 'BDC_OKCODE' '=CHOO'.
     perform bdc_dynpro      using 'SAPMV45A' '4001'.
     PERFORM bdc_field       USING 'BDC_OKCODE' '=POAN'.
endform. "create_bdcdata
FORM create_bdc_item_data.
     CONCATENATE 'RV45A-KWMENG(' zc1 ')' INTO FN.
     perform bdc_field       using 'BDC_CURSOR' FN.
     perform bdc_field       using FN WA_VA01-KWMENG.
     CONCATENATE 'KOMV-KBETR(' zc1 ')' INTO FN.
     perform bdc_field       using FN WA_VA01-KBETR.
     CONCATENATE 'RV45A-MABNR(' zc1 ')' INTO FN.
     perform bdc_field       using FN WA_VA01-MABNR.
     perform bdc_dynpro      using 'SAPMV45A' '4001'.
     PERFORM bdc_field       USING 'BDC_OKCODE' '=POAN'.
ENDFORM.
form errorlog.
LOOP AT MESSTAB .
    if MESSTAB-MSGNR = '311' or MESSTAB-MSGTYP = 'E'.
        SELECT SINGLE msgnr text FROM T100
                        into wa_errmess
                        WHERE SPRSL = MESSTAB-MSGSPRA
                          AND ARBGB = MESSTAB-MSGID
                          AND MSGNR = MESSTAB-MSGNR.
        IF SY-SUBRC = 0.
          err_message = wa_errmess-TEXT.
          IF err_message CS '&1'.
            REPLACE '&1' WITH MESSTAB-MSGV1 INTO err_message.
            REPLACE '&2' WITH MESSTAB-MSGV2 INTO err_message.
            REPLACE '&3' WITH MESSTAB-MSGV3 INTO err_message.
            REPLACE '&4' WITH MESSTAB-MSGV4 INTO err_message.
          ELSE.
            REPLACE '&' WITH MESSTAB-MSGV1 INTO err_message.
            REPLACE '&' WITH MESSTAB-MSGV2 INTO err_message.
            REPLACE '&' WITH MESSTAB-MSGV3 INTO err_message.
            REPLACE '&' WITH MESSTAB-MSGV4 INTO err_message.
          ENDIF.
          CONDENSE err_message.
          WRITE: / MESSTAB-MSGTYP, err_message .
        ELSE.
          WRITE: / MESSTAB.
        ENDIF.
    endif.
ENDLOOP.
endform. "errorlog
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
WA_BDCDATA-PROGRAM = PROGRAM.
WA_BDCDATA-DYNPRO   = DYNPRO.
WA_BDCDATA-DYNBEGIN = 'X'.
APPEND WA_BDCDATA TO IT_BDCDATA.
CLEAR WA_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
WA_BDCDATA-FNAM = FNAM.
WA_BDCDATA-FVAL = FVAL.
APPEND WA_BDCDATA TO IT_BDCDATA.
CLEAR WA_BDCDATA.
ENDFORM.
input file :
OR     2148     0001235     R-1162     8     17
OR     2148     0001235     R-1161     2     30
OR     2148     0001235     100-400     6     25
OR     2148     0001235     R-1162     4     12
OR     2148     0001236     R-1162     3     12
OR     2148     0001236     R-1161     2     30
OR     2148     0001236     100-400     1     25
OR     2148     0001236     R-1162     7     12
OR     2148     0001236     R-1161     8     30
OR     2148     0001236     100-400     10     25
OR     2148     0001235     R-1161     5     30
OR     2148     0001235     100-400     2     25
OR     2148     0001235     R-11621     3     12
OR     2148     0001235     R-1161     2     30
OR     2148     0001235     100-400     1     25
OR     2148     0001235     R-1162     7     12
OR     2148     0001235     R-1161     8     30
OR     2148     0001235     100-400     10     25
OR     2148     0001236     R-1162     8     17
OR     2148     0001236     R-1161     2     30
OR     2148     0001236     100-400     6     25
OR     2148     0001236     R-1162     4     12
OR     2148     0001236     R-1161     5     30
OR     2148     0001236     100-400     2     25

How can we know the source code no.of lines

hi guys!
please help me, how can we check the source code(No. of lines)in program with out comments

hi,
Use this code. Replace with your program name with the text in bold. V_lines gives the no of lines of code excluding comments and as well blank lines.
TYPES: BEGIN OF t_type,
         line(72),
       END OF t_type.
DATA: program LIKE sy-repid
                 VALUE <b>'Z_ABC_INNER_JOIN'</b>,
      t TYPE STANDARD TABLE OF t_type WITH HEADER LINE.
DATA: v_lines TYPE i.
READ REPORT program INTO t.
IF sy-subrc =0.
LOOP AT t.
    IF t+0(1) = '*' OR t IS INITIAL.
      DELETE t INDEX sy-tabix.
    ENDIF.
ENDLOOP.
DESCRIBE TABLE t LINES v_lines.
ENDIF.
WRITE : v_lines.
Regards,
Sailaja.

How can i write this C-Code in G-Code

hallo
how can I write this C-Code in LabVIew ,
for a=0; a=<10; a++
for b=0; b=5 ; b+2
X= 3+b;
Y=1+a;
please see the attachment and tell me where is the problem
Attachments:
Unbenannt 11.vi ‏43 KB

Well, at least you tried and got some of it right.
I think this should do what you want, but my C is rusty. Is the increment performed before or after the loop executes? If it's after, then I believe the loop should iterate 11 times, not 10.
In any case, you should note that for a literal translation, you would need to add a sequence structure to guarantee that Y was written to only after the inner loop finished because of the way data-flow works.. Also, note that controls and indicators in LabVIEW are not equivalent to variables. They can be used as such, but they usually should not be.
Another point about this is that you probably want to use the correct data type - the orange terminals are floating point indicators (of double precision, in this case) and you want integers.
To learn more about LabVIEW, I suggest you try looking at some of these tutorials.
Try to take over the world!
Attachments:
C.png ‏4 KB

How can I get the HTML codes in illustrator?

Hi, I am a graphic designer, and I am getting into the web world, I wanna know how can I get the HTML codes to upload a web design made using Illustrator,...¡?Does any one know?Please let me know...

everyone here is right, dreamweaver is better and you will need to understand html for this to work. HOWEVER, you can make a functional website using just illustrator and notepad (or text edit if you're on a mac).
Design your site in illy, slice it up with the slice tool. http://s23.postimg.org/mv311kpp7/test_illy.jpg
Save for web and select html and images, you'll get an html file and an images folder. Open the HTML file in your text editing program and it will look like this: http://s10.postimg.org/f32nf6r2h/html_stuff.jpg you'll have to know HTML codes but you can find tutorials online for most stuff, you'll just have to figure it out. In my fake site, i linked a button to google so i had to add <a href> tags to the code. http://s22.postimg.org/5avpadhch/a_href.jpg save the html file and open it in your web browser, hopefully not IE. You can't tell in the picture but the middle button actually does link to google. http://s21.postimg.org/qd77slqmf/firefox.jpg

How can i write the trigger for Global Temporary Table

Hi Grus,
How can i write the trigger for Global Temporary Table.
I was created the GTT with trigger using the below script .
CREATE GLOBAL TEMPORARY TABLE GLOBAL_TEMP
EMP_C_NAME VARCHAR2(20 BYTE)
ON COMMIT PRESERVE ROWS;
CREATE OR REPLACE TRIGGER TRI_GLOBAL_TEMP
BEFORE DELETE OR UPDATE OR INSERT
ON GLOBAL_TEMP
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
BEGIN
INSERT INTO EMPNAME VALUES (:OLD.EMP_C_NAME);
END;
trigger was create successfully, but the wouldn't insert into to EMPNAME Table..
Please guide whether am correct or not? if not kindly give a correct syntax with example
Thanks in Advance,
Arun M M

BEGIN
INSERT INTO EMPNAME VALUES (:OLD.EMP_C_NAME);
END;
you are referencing old value in insert stmt.
BEGIN
INSERT INTO EMPNAME VALUES (:new.EMP_C_NAME);
END;then run ur application it works fine...
CREATE GLOBAL TEMPORARY TABLE GLOBAL_TEMP
EMP_C_NAME VARCHAR2(20 BYTE)
ON COMMIT PRESERVE ROWS;
CREATE OR REPLACE TRIGGER TRI_GLOBAL_TEMP
BEFORE DELETE OR UPDATE OR INSERT
ON GLOBAL_TEMP
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
BEGIN
dbms_output.put_line(:OLD.EMP_C_NAME||'yahoo');
INSERT INTO EMPNAME VALUES (:new.EMP_C_NAME);
dbms_output.put_line(:OLD.EMP_C_NAME);
END;
create table EMPNAME as select * from GLOBAL_TEMP where 1=2
insert into GLOBAL_TEMP values('fgfdgd');
commit;
select * from GLOBAL_TEMP;
select * from EMPNAME;
output:
1 rows inserted
commit succeeded.
EMP_C_NAME
fgfdgd
1 rows selected
EMP_C_NAME
fgfdgd
1 rows selectedgot it Arun
Edited by: OraclePLSQL on Dec 28, 2010 6:07 PM

How can we tell the printer to use a different paper cartridge

Hello all,
We are using t.code MN05 to assign a printer to each Purchase group. How can we tell the printer to use a different paper cartridge so that purchase orders ( output type ZNEU, ZEU, ZEN) can be printed on a paper with company logotype. Local team are removing most of the printers an we have only one multifunction printer availabel for a large number of employees.
Thank you for your suggestions

Hi,
I can help you about how to use different Paper Tray's but different cartridge case I am not sure...

How can I customize the toolbar when using the attribute browser

In CVI 2012, the toolbar changes depending on the environment, e.g. it is different for the source window and the UI editor. The toolbar can be customized using the menu Options / Toolbar...
Unfortunately, when using the attribute browser of the UI editor, another toolbar is displayed, i.e. not the UI editor toolbar.... I would have assumed that the attribute browser belongs to the UI editor, obviously it doesn't... So how can I customize the toolbar when using the attribute browser?
Solved!
Go to Solution.

Luis,
It's nice to have you back
Thank you for the clarification, so I'll elaborate a bit more: In the regular workspace toolbar, I have a disk symbol to save the file. This symbol is gone in the attribute browser...
So I have three different toolbars, for source code (workspace), UI editor, and the UI editor displayed but the attribute browser clicked on (selected)...
Thanks
Wolfgang
Source code:
UI editor:
Attribute browser:

) how can we print the bar code in SAP_SCRIPTS?

) how can we print the bar code in SAP_SCRIPTS?

hi Pavan,
barcodes wil be generated in the printer itself, if you give <BC>&HD_GEN-MATERIAL_NUMBER&<> then you have a value for "Barcode" .
Adding Your Own Bar Code:-
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94fc51ea11d189570000e829fbbd/content.htm
barcodes in SAP
http://help.sap.com/saphelp_nw04/helpdata/en/68/4a0d5b74110d44b1b88d9b6aa1315b/content.htm
Print Unique Indicator as a Barcode
The printing of unique indicators of elements (reference numbers of records, case indicators, or document numbers) as barcodes is controlled by SAPscript forms.
SAP delivers a common SAPscript form based on the SAP barcode type AUFNR for records, cases, documents and incoming post items.
To create another SAP barcode type, you can copy the SAPscript form RMPS_BARCODE and then adjust it to your own requirements. Then you have to define the new form using the following attribute names in the table SCMGPARAM:
From within a SAPscript form, a subroutine GET_BARCODE in the ABAP program QCJPERFO is called. Then the simple barcode contained there (First page, Next page, Last page) is printed as local variable symbol.
Definition in the SAPscript form:
/: PERFORM GET_BARCODE IN PROGRAM QCJPERFO
/: USING &PAGE&
/: USING &NEXTPAGE&
/: CHANGING &BARCODE&
/: ENDPERFORM
/ &BARCODE&
Coding of the calling ABAP program:
REPORT QCJPERFO.
FORM GET_BARCODE TABLES IN_PAR STUCTURE ITCSY
OUT_PAR STRUCTURE ITCSY.
DATA: PAGNUM LIKE SY-TABIX, "page number
NEXTPAGE LIKE SY-TABIX. "number of next page
READ TABLE IN_PAR WITH KEY PAGE.
CHECK SY-SUBRC = 0.
PAGNUM = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY NEXTPAGE.
CHECK SY-SUBRC = 0.
NEXTPAGE = IN_PAR-VALUE.
READ TABLE OUT_PAR WITH KEY BARCODE.
CHECK SY-SUBRC = 0.
IF PAGNUM = 1.
OUT_PAR-VALUE = |. "First page
ELSE.
OUT_PAR-VALUE = ||. "Next page
ENDIF.
IF NEXTPAGE = 0.
OUT_PAR-VALUE+2 = L. "Flag: last page
ENDIF.
MODIFY OUT_PAR INDEX SY-TABIX.
ENDFORM.
hope this helps you
Regards,
Jayant

How can i write the bellow code using field symbols

Similar Messages

Maybe you are looking for