How can i write to ntfs device

how can i write to ntfs device from mac

By default, OS X (and near all operating systems different than Windows) can't write in NTFS drives because of a Microsoft limitation.
To be able to write in NTFS drives, you have to use a third-party application. There are a lot, but the most recommended is Paragon NTFS, although it's a paid application. If you want a free app, try this > http://osxfuse.github.com

Similar Messages

  • How can i write on ntfs volume ?

    Can you help me to mount ntfs volume in R/W.
    Thank you!

    But if one day Apple add support of ntfs write
    I seriously doubt Apple will ever do that. It isn't worth their time to put that much development into supporting NTFS write capability.
    Paragon went through Microsoft's validation testing and approved it.
    Note that I already stated NTFS-3G is free. Also note that there are two different versions of NTFS-3G on the page I linked to. Tuxera NTFS is not free, but is twice as fast as the free version towards the bottom of the page. Both support 64 or 32 bit OS X startup.

  • How can I write to an SD card with my iPad 3?

    How can I write to an SD card/thumb drive with my iPad 3?

    Sorry to post this question before realizing others already did. HOWEVER! Why would Apple make such a cool device like the iPad without the abiity to write to an SD card?

  • How can i write the data to PIC16F819 using labview?

    how can i write the data to PIC16F819 using labview?
    Need help!
    im using labview in gathering the datas that i need to right to the PIC, then after getting all the datas i am using another program which is ICD2 in order to write it to the PIC. Is it possible to do this task through LV? coz we are spending a lot of time transferring the data from LV to ICD2 manually and its prone to mistake as well.
    any suggestion?
    thanks,
    Pedz

    LabVIEW does not currently have a built-in method to communicate with
    i2c, but there are other vendors that sell devices to communicate in
    this manner with LabVIEW development kits.  One that I know of is
    from MCC... here is a link:  http://www.mcc-us.com
    They sell a device called iPort, and then you can buy LabVIEW VIs to go with it.  I hope this is helpful to you!
    john m

  • I have one apple ID for both my Iphone 4S and Ipad. My Ipad was stolen from me and when I checked the iCloud, it can only locate the Iphone 4S. How can I locate the Ipad device?

    I have one apple ID for both my Iphone 4S and Ipad. My Ipad was stolen from me and when I checked the iCloud, it can only locate the Iphone 4S. How can I locate the Ipad device?

    Welcome to the Apple Community.
    You can only locate your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
    Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

  • How can I remove a tablet device that isn't there?

    In one of our test environments we've got an Xserve running OSX 10.5.6, inside is running Server 10.5 in VMWare Fusion.
    Now, the VM thinks it has a tablet device installed, as is evidenced by the ink tab showing up in system preferences (the host does not have the ink option there). Obviously there is no tablet device installed. The VM was set up by one of our IT guys who has already reinstalled it, noting no options during setup about a tablet device.
    This problem is causing one piece of software to not work in the VM, or at least, the UI doesn't. There are thousands of console messages reading "QCocoaView handleTabletEvent: This tablet device is unknown (received no proximity event for it). Discarding event"
    Question is, how can I remove the tablet device so that this software will start working? I've checked all through VMWare Fusion's options/preferences & couldn't find anything there and Googling has turned up nothing so far.

    a brody wrote:
    Since Mac OS X Server is different from Mac OS X client, I've asked a moderator to move your thread to the appropriate forum.
    Oops, my bad, but thanks.

  • How can i remove an associated device from my iTunes account?

    how can i remove an associated device from my iTunes account?

    Hi..
    See, "Removing an associated device or computer from an Apple ID"  here >  iTunes Store: Associating a device or computer to your Apple ID
    Your iTunes account is the same as your Apple ID.

  • How can i see the "manage devices" in my itunes account? because i want to remove a device from using my apple id. tnx so much

    how can i see the "manage devices" in my itunes account? because i want to remove a device from using my apple id. tnx so much

    Thanks pvonk, I will try downloanding the book from the Iphone right now.......
    Just tried to download and it wants me to buy it again?  Is there some way around this?  I guess I thought that was the whole point of the cloud, buy it once and access from any of your devices right?
    Also, I have logged into the icloud.com as suggested and will plink around there for a bit and try to understand.  It is just all so dang different that what I am used to; Apple's way, that is.
    Thanks again for the Icloud tip and if you know of a way to download without making a 2nd purchase I would sure love to hear it!
    Geez. one other thing (I guess I am complaining) but I bought more space in the cloud, they took my cash fast enough but have not yet increase the size of my storage space yet?  Is Apple sometimes slow to get internal stuff done?

  • How can i remove all my devices added to my Apple ID?

    How can i reset the added devices to my Apple ID, dearthursize all of my devices connected to my Apple ID? without having access to the devices, i think its my old computers that i dont have anymore. Just got a new computer, and i authersize it, because it says maximum (5) have been reached.
    Thanks, Kasper.

    The devices linked to your Apple ID have absolutely nothing to do with the 5 computer limit that is causing the issue.
    Devices like iPhones, iPads, iPods do not count towards the 5 computer limit.
    Simply deauthorize the computers that you no longer use or if you no longer have access to them, deauthorize all and authorize only the computers you have that actually need access to the content.
    About Authorization and De-Authorization

  • How can i add a new device

    how can i add a new device to Itunes

    Not sure what your post's title means, but you can only add a device to your iCloud account directly on the device e.g. log into the account in Settings > iCloud
    If your iPad isn't showing in your computer's iTunes when you connect it to your computer then is your iTunes up-to-date ? There is also some troubleshooting for a device not showing on these pages :
    PC : iPhone, iPad, or iPod touch not recognized in iTunes for Windows
    Mac : iOS: Device not recognized in iTunes for OS X - Apple Support

  • How can I write a program that compiles without warnings?

    I tried the following with the 1.5 beta-compiler (build 28; I think):
    class Y {
         public static final class Pair<X,Y> {
           private X fst;
           private Y snd;
           public Pair(X fst, Y snd) {this.fst=fst; this.snd=snd;}
           public X getFirst() { return fst; }
           public Y getSecond() { return snd; }
           public String toString() { return "("+fst+","+snd+")"; }
      public static void main(String... args) {
         Pair[] pairArr = new Pair[10];              // supposed to be an array of Pair<Integer,Integer>
         for (int i=0; i<pairArr.length; i++)
             pairArr[i] = new Pair<Integer,Integer>(i,i);
         for (int i=0; i<pairArr.length; i++) {
             Pair<Integer,Integer> p = pairArr; // unchecked warning
         System.out.println(p);
         Integer first = p.getFirst();
         Integer second = p.getSecond();
    // ... more stuff ...
    It turns out that I get an unchecked warning when I extract an element from the array of pairs. Okay, that's fine. How can I avoid the warning? I had expected that an explicit cast would help.
      Pair<Integer,Integer> p = (Pair<Integer,Integer> )pairArr;
    With a cast I'm telling the compiler: "I _know_ what I'm doing; please trust me." But the compiler still issues a warning.
    How can I write a warning-free program in this case? The only thing I can think of, is not using the parameterized type Pair in its parameterized form. But it's not the idea of Java Generics that I refrain from using parameterized types. What am I missing?

    It turns out that I get an unchecked warning when I
    extract an element from the array of pairs. Okay,
    that's fine. How can I avoid the warning? I had
    expected that an explicit cast would help.
    Pair<Integer,Integer> p = (Pair<Integer,Integer>
    )pairArr;
    With a cast I'm telling the compiler: "I _know_ what
    I'm doing; please trust me."  But the compiler still
    issues a warning.  Yes, but at least you were able to change the warning from "unchecked assignment" to "unchecked cast" which is a little shorter ;-)
    Seriously , since arrays of generic types are disallowed, there is probably no way to get rid of these warnings - which makes a strong point for eliminating "unchecked" warnings altogether (see the other thread "selectively suppressing compiler warnings")
    Cheerio,
    Gernot

  • How can I Write a sine wave in an Access-fil​e?

    I measure a sine wave in LabView 6i. How can I write the datas automatically to an Acces-file, at the same time?
    In my program, I managed it with Execute SQL.vi, I change a number in a SQL statement(String) -> after this I push start and then it writes the statement in the Access-file.
    The problem is, it writes only one data per measurement in the file. How can I write all datas in the Access-file and measure the wave at the same time?
    Thanks for help!
    Attachments:
    getwave.vi ‏49 KB

    On the waveform palette, you will find a "to components" vi that you can break out the array of the waveform. You can then, using a for loop write all of the values from the waveform.
    Better yet, there are examples in the database toolkit manual on pages 3-13 to 3-15 that deal with reading arrays (and even has a waveform example).
    Good luck!

  • How can I see my USB device in the measuremen​t&automati​on explorer?

    I'm trying to use an USB-device with LabView7.0.
    I followed the manual "using NI-VISA3.0 to control your USB device" which I found on the NI-webpage.
    I generated an .inf file using the VISA driver developement wizard and installed it in the INV folder of my system (I'm using Win2000).
    The following problems occured: after I connect my USB device the "add new hardware wizard" pops up and aks for a driver for the new hardware. when I direct it to the folder with the generated .inf file it doesn't accept this file as a driver.
    second: the USB device doesn't appear in the measurement&automation explorer. I assume that as long as my device doen't appear there it is not recognized by NI-VISA and the comm
    unication from LV wouldn't work?
    How can a make my USB device visible in the meas.&aut. explorer?
    Regards
    Tobias

    Tobias,
    In the VISA Driver Development Wizard, you are required to specify the Vendor and Product ID. These numbers are what Windows will use to determine whether a specific driver is appropriate for a given device. If these numbers do not match between your device and the Windows driver (INF file) that you generate, you will see the behavior that you describe. Check to make sure that you are using the appropriate values. Also, did you right click on the INF file and install it as directed in step 2.2.2?
    Page 5-87 of the VISA Programmer's reference manual specifies how to do a viOpen to a USB device in RAW mode, but you still need the same sorts of Product ID and Mfg ID that you needed for the INF file generation. Furthermore, if you are communicating with
    your instrument directly, you will need to know exactly what command set it expects, so make sure you get that from the manufacturer as well. Finally, I want to mention that if this device complies with the USBTMC standard, then none of this is necessary--the steps above are for setting up a RAW USB connection. See this link for information.
    Scott

  • How can i write the below code using "For all entries"

    Hi
    How can we write the below code using "for all entries" and need to avoid joins...
    Please help
    SELECT aaufnr aobjnr aauart atxjcd a~pspel
    agstrp awerks carbpl cwerks
    INTO TABLE t_caufv
    FROM caufv AS a
    INNER JOIN afih AS b
    ON aaufnr = baufnr
    INNER JOIN crhd AS c
    ON bgewrk = cobjid
    AND c~objty = 'D'
    WHERE ( a~pspel = space
    OR a~txjcd = space
    OR NOT a~objnr IN
    ( select OBJNR from COBRB AS e
    WHERE objnr = a~objnr ) )
    AND a~werks IN s_plant
    AND a~auart IN s_wtype
    AND NOT a~objnr IN
    ( select OBJNR from JEST AS d
    WHERE objnr = a~objnr
    AND ( dstat = 'A0081'OR dstat = 'A0018' )
    AND d~inact 'X' ).
    Reward points for all helpfull answers
    Thanks
    Ammi.

    Hi,
    SELECT objnr objid aufnr
            from afih
            into table t_afih.
    SELECT objnr
            from JEST
            into table t_JEST
            where stat = 'A0045'
               OR stat = 'A0046'
               AND inact 'X'.
    SELECT objnr
            from COBRB
            into table t_cobrb.
    SELECT arbpl werks objid objty
          from crhd
          INTO table it_crhd
          FOR ALL ENTRIES IN it_afih
          WHERE objty eq 'D'
          AND gewrk = it_afih-objid.
    SELECT aufnr objnr auart txjcd pspel gstrp werks aufnr
            FROM caufv
            INTO table t_caufv
            FOR ALL ENTRIES IN it_afih
            WHERE aufnr = it_afih-aufnr
              And pspel = ' '
              AND txjcd = ' '
             ANd objnr ne it_crhd-objnr
              AND auart in s_wtype
              AND werks in s_plant.
             AND objnr ne it_jest-objnr.
    dont use NE in the select statements, it may effect performance also. Instead use if statements inside
    loops.
    loop at t_caufv.
    read table it_chrd............
      if t_caufv-objnr ne it_chrd-objnr.
      read table it_jest..........
       if   if t_caufv-objnr ne it_jest-objnr.
        (proceed further).
       endif.
      endif.
    endloop.
    hope this helps.
    Reward if useful.
    Regards,
    Anu

  • How can I write into a table cell (row, column are given) in a databae?

    How can I write into a table cell (row, column are given) in a database using LabVIEW Database Toolkit? I am using Ms Access. Suppose I have three columns in a table, I write 1st row of 1st column, then 1st row of 3rd column. The problem I am having is after writing the 1st row 1st column, the reference goes to second row and if I write into 3rd column, it goes to 2nd row 3rd column. Any suggestion? 
    Solved!
    Go to Solution.

    When you do a SQL INSERT command, you create a new row. If you want to change an existing row, you have to use the UPDATE command (i.e. UPDATE tablename SET column = value WHERE some_column=some_value). The some_column could be the unique ID of each row, a date/time, etc.
    I have no idea what function to use in the toolkit to execute a SQL command since I don't use the toolkit. I also don't understand why you just don't do a single INSERT. It would be much faster.

Maybe you are looking for