How can if figure out which contacts are in both iCloud and on my Mac?
I keep contacts on my Mac and on iCloud. I want to see which ones are in both databases. Some of them automatically "linked" and others did not. The search for showing contacts that are both a member of "my Mac" and a member of "iCloud" does not seem to work. I also want to figure out which contacts are not in a group and this has been difficult as well.
If you change your preferences so that the defaul is not iCloud then you get two sections like this:
When I don't have it set to On My Mac then I only get one section because all of my cards are in the cloud.
Similar Messages
-
My Library has ten more songs than my iPod. How can I find out which songs are not syncing?
I recently had to purchase a new hard drive. Because the size of my music collection exceeds 140 GB, I stored all of my music on a separate external hard drive. When I exported everything back into my new iTunes library, I found that I had about 200 more songs than I had in the previous library. After deleting most of those extraneous songs, I was able to get my library close to where it was before. However, after syncing to my iPod Classic, I noticed that only 34,853 of the 34,863 loaded. How can I figure out which of those ten songs in my library did not sync to my iPod?
Yellow12It may be that the 10 songs are unchecked. To find them select songs view.
If there is a column Heading marked with a tick then click on it to sort by this column.
If the Column is not there then View > View Options and select the Checked column which will then display
Check the songs by putting ticks in the empty boxes and resynch. Now those tracks should go over as well -
How can I find out which Contact list in my outlook that iCloud is syncing with?
How can I find out which Contact list in my outlook that iCloud is syncing with?
Try the helpful tips in the following link to possibly make Outlook and iCloud play nice with your contacts:
http://www.slipstick.com/outlook/icloud-outlook-problems-syncing-contacts/ -
How can I find out which tables are having DDL locks?
I can see related information by querying DBA_DDL_LOCKS view, but it doesn't give me the information which tables are having DDL locks.
Is there a way I can find out which tables are having DDL locks?
Thanks!Here's a long script written back in 2001. Still works:
BREAK on sid on serial# on username
COL sid for 9999
COL serial# for 99999
COL username for a20
COL type for a20 trunc
COL lmode for a5 trunc
COL lrequest for a4 trunc
COL detail for a75 trunc
SELECT s.sid
, s.serial#
, s.username
, DECODE(
l.TYPE
-- Long locks
, 'TM', 'dml/data enq (TM)'
, 'TX', 'transac enq (TX) '
, 'UL', 'pls usr lock (UL)'
-- Short locks
, 'BL', 'buf hash tbl (BL)'
, 'CF', 'control file (CF)'
, 'CI', 'cross inst f (CI)'
, 'CU', 'cursor bind (CU) '
, 'DF', 'data file (CF) '
, 'DL', 'direct load (DL) '
, 'DM', 'mount/strtup (DM)'
, 'DR', 'reco lock (DR) '
, 'DX', 'distrib tran (DX)'
, 'FI', 'sga opn file (FI)'
, 'FS', 'file set (FS) '
, 'IN', 'instance num (IN)'
, 'IR', 'instce recvr (IR)'
, 'IS', 'get state (IS) '
, 'IV', 'libcache inv (IV)'
, 'JQ', 'job queue (JQ) '
, 'KK', 'log sw kick (KK) '
, 'LS', 'log switch (LS) '
, 'MM', 'mount def (MM) '
, 'MR', 'media recvry (MR)'
, 'PF', 'pwfile enq (PF) '
, 'PR', 'process strt (PR)'
, 'RW', 'row wait (RW) '
, 'RT', 'redo thread (RT) '
, 'SC', 'scn enq (SC) '
, 'SM', 'smon lock (SM) '
, 'SN', 'seqno instce (SN)'
, 'SQ', 'seqno enq (SQ) '
, 'ST', 'space transc (ST)'
, 'SV', 'seqno value (SV) '
, 'TA', 'generic enq (TA) '
, 'TD', 'dll enq (TD) '
, 'TE', 'extend seg (TE) '
, 'TS', 'temp segment (TS)'
, 'TT', 'temp table (TT) '
, 'UN', 'user name (UN) '
, 'WL', 'write redo (WL) '
, 'TYPE = ' || l.TYPE) AS type
, DECODE(l.lmode, 0, 'none', 1, 'null', 2, 'RS', 3, 'RX', 4, 'S', 5, 'SRX', 6, 'X', TO_CHAR(l.lmode)) A
S lmode
, DECODE(l.request, 0, 'none', 1, 'null', 2, 'RS', 3, 'RX', 4, 'S', 5, 'SRX', 6, 'X', TO_CHAR(l.request
)) AS lrequest
, DECODE(
l.TYPE
, 'JQ', 'Job #' || j.job || ' (' || j.what || ') owned by: ' || j.username
, 'MR', DECODE(s.user_type, 'BG', 'DICTIONARY OBJECT', LOWER(obj.owner) || '.' || LOWER(obj.name))
|| ' (' || LOWER(obj.TYPE) || ')'
, 'RT', 'thread #' || LOWER(l.id1)
, 'RW', 'file#' || LOWER(SUBSTR(l.id1, 1, 3)) || ', block#' || LOWER(SUBSTR(l.id1, 4, 5)) || ', ro
w#' || LOWER(l.id2)
, 'TD', 'object: ' || LOWER(obj.owner) || '.' || LOWER(obj.name) || ' (' || LOWER(obj.TYPE) || ')'
, 'TM', 'object: ' || LOWER(obj.owner) || '.' || LOWER(obj.name) || ' (' || LOWER(obj.TYPE) || ')'
, 'TS', DECODE(l.id2, 0, 'enqueue', 'new block allocation')
, 'TX', DECODE(
lo.object_name
, NULL, 'rbs #' || TRUNC(l.id1 / 65536) || ', slot #' || LOWER(l.id1)
, 'rbs #' || TRUNC(l.id1 / 65536) || ', slot #' || LOWER(l.id1) || ', object: ' || LOWE
R(lo.object_name))
, 'UL', 'lock name: ' || la.name || ', expiration date: ' || TO_CHAR(la.expiration, 'DD-MON-RR HH2
4:MI:SS')
, 'WL', 'redo log file#' || LOWER(l.id1)
, 'id1 = ' || l.id1 || ', id2 = ' || l.id2) AS detail
FROM sys.v_$lock l
, (SELECT a.sid
, a.serial#
, NVL(a.username, 'SYS (' || LOWER(b.name) || ')') AS username
, DECODE(a.username, NULL, 'BG', 'USER') AS user_type
FROM sys.v_$session a
, sys.v_$bgprocess b
WHERE a.paddr = b.paddr(+)) s
, (SELECT o.obj#
, u.name AS owner
, o.name
, DECODE(
o.type#
, 0, 'NEXT OBJECT'
, 1, 'INDEX'
, 2, 'TABLE'
, 3, 'CLUSTER'
, 4, 'VIEW'
, 5, 'SYNONYM'
, 6, 'SEQUENCE'
, 7, 'PROCEDURE'
, 8, 'FUNCTION'
, 9, 'PACKAGE'
, 11, 'PACKAGE BODY'
, 12, 'TRIGGER'
, 13, 'TYPE'
, 14, 'TYPE BODY'
, 19, 'TABLE PARTITION'
, 20, 'INDEX PARTITION'
, 22, 'LIBRARY'
, 23, 'DIRECTORY'
, 24, 'QUEUE'
, 28, 'JAVA SOURCE'
, 29, 'JAVA CLASS'
, 30, 'JAVA RESOURCE'
, 32, 'INDEXTYPE'
, 33, 'OPERATOR'
, 34, 'TABLE SUBPARTITION'
, 35, 'INDEX SUBPARTITION'
, 39, 'LOB PARTITION'
, 40, 'LOB SUBPARTITION'
, 43, 'DIMENSION'
, 44, 'CONTEXT'
, 47, 'RESOURCE PLAN'
, 48, 'CONSUMER GROUP'
, 51, 'SUBSCRIPTION'
, 52, 'LOCATION'
, 'UNDEFINED') AS type
FROM sys.obj$ o
, sys.user$ u
WHERE o.owner# = u.user#) obj
, (SELECT vlo.xidusn
, vlo.xidslot
, vlo.xidsqn
, vlo.process
, o.owner || '.' || o.object_name AS object_name
FROM sys.v_$locked_object vlo
, sys.dba_objects o
WHERE vlo.object_id = o.object_id) lo
, (SELECT job
, schema_user AS username
, what
FROM dba_jobs) j
, sys.dbms_lock_allocated la
WHERE l.sid = s.sid
AND l.id1 = obj.obj#(+)
AND l.id2 = j.job(+)
AND TRUNC(l.id1 / 65536) = lo.xidusn(+)
AND LOWER(l.id1) = lo.xidslot(+)
AND l.id2 = lo.xidsqn(+)
AND l.id1 = la.lockid(+)
AND l.TYPE != 'MR'
UNION ALL
/*** LATCH HOLDERS ***/
SELECT s.sid
, s.serial#
, s.username
, 'latch'
, 'X'
, 'none'
, h.name || ' addr=' || LOWER(RAWTOHEX(laddr)) AS object
FROM sys.v_$process p
, sys.v_$session s
, sys.v_$latchholder h
WHERE h.pid = p.pid
AND p.addr = s.paddr
UNION ALL
/*** LATCH WAITERS ***/
SELECT s.sid
, s.serial#
, s.username
, 'latch'
, 'none'
, 'X'
, name || ' latch=' || p.latchwait AS object
FROM sys.v_$session s
, sys.v_$process p
, sys.v_$latch l
WHERE latchwait IS NOT NULL
AND p.addr = s.paddr
AND p.latchwait = l.addr
ORDER BY sid
, serial#
, username
, 4
, 5
, 6
, 7; -
RV082 VLAN's - How can I find out which clients are on them?
We have an RV082 router and two of the ports are designated as VLAN2 and VLAN3, the router interface only gives a status report of the port but I can't find anyway to see which computer's are on those VLAN's. Is there anyway to do this? Thank you.
The router is DHCP, I can see everybody that way but what I was wondering because that information isn't on the DHCP status window is who is on let's say, we have 3 VLANS setup in the router, the router tells me through System Summary Port Stats which port is set to which VLAN but I do not see anywhere in the router interface which IP addresses are going to VLAN1, VLAN2 or VLAN3 for instance. It does not show this in the Port Management screen either. Was wondering if there is some way to see this in CMD? I do not know how to interface with the 3 switches we have in CMD either. I am just an old A+ guy in a small company who knows how to fix computers but don't know much about networking. I was put into this position because I could change out a video card so they thought I was the guy to run the network because they can't afford to do much more than that with the economy in a shambles. Thanks for any help you can give me.
Dean
P.S. I'm really a drafter. -
I have used my appeID to load some games to my son's friends iPod's and have found that the iTunes gift cards that were loaded under my ID have been used very quickly ($100 in 2 months) when I have not been downloading things. I have been told that the friend has been downloading games/music after I had put in my password to load something else.
We are fellow users on here and not Apple employees so have no account access.
You can see iTunes and app store purchases by going to the store for each and clicking Purchases on the right side.
You might want to consider contacting the store support staff at http://www.apple.com/emea/support/itunes/contact.html and request your account be locked for a period of time. You need to stop allowing uncontrolled access and that may be he bet way. -
How can i figure out from my account page which kids ipad made purchases
How can I figure out which childs ipad made an in app purchase from my main account - recent purchases page?
As far as I know there isn't any way to see which device made the purchase
-
How can I figure out where are the heaviest volumes in order to get rid of the useless stuff?.
How about a few specific NOUNs to replace the vague references you have made. A little context.
Volumes of WHAT ?
What sort of STUFF are you trying to eliminate ? -
How to figure out which tables are using Extensible Optimizer?
Hi guys,
I'm sure that there're several tables those are associated with Extensible Optimizer in my database, I can also find the Extensible Optimizer relevant type and the implementation of interface functions ODCIGetInterfaces, ODCIStatsTableFunction.
I'm curious to know is there a way to figure out which tables are associated with this Extensible Optimizer, does anyone have any clues?
Database: oracle 11.2
Thank you in advance.Hi,
Can you please check the below link.It may help you:
http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28425/ext_optimizer.htm
Best regards,
Rafi.
http://rafioracledba.blogspot.com -
I have my personal music (not purchased from Itunes) stored in two locations, on my PC and on an external HD. How can I find out which directory itunes uses to access this music? I am using Itunes version 11.4.0.18. Thanks
Many thanks JEM24 for your help. Ive just spent the best part of six hundred pounds on a new Sony Rx100m2 compact camera, so I have no interest in the Ipods camera at all really. I doubt Ill be watching many videos on it as Im very lucky in that I have a good Android tablet. Its more as a stock music player that Ill be buying the Ipod for, if indeed I do end up buying one. I dont like the idea of paying the exorbitant amount added for more memory space that Apple along with most other companies charge. In fact I read an article on this very subject just yesterday in the tech section of Flipboard. It stated in the article that in the case of the Iphone the actual cost of each additional gigabyte of storage to Apple et al is something in the order of 60p.. This is certainly not reflected in the price us the customer has to pay at the till.. Its for this reason primarily that Apple in particular, because their products do not allow adding expandable memory of your own in the form of cheap to buy cards, that nobody in their right mind buys the 64gig etc Iphones..I am aware that we are discussing my potential purchase of an Ipod Touch here but you see my point. Many thanks again though for helping me.
-
How to download elements 13 to Mac OS computer. It's telling me to choose an app to open file. I can not figure out which
if you have a serial number, and if you follow all 7 steps you can directly download a trial here: Adobe Photoshop Elements 13 Direct Download Links, Premiere too | ProDesignTools
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.
or you can dl from dell, https://smartsource.dell.com/ -
How can I know in which Tables are the fields stored
Hi,
In transaction FSE3 Display Financial Version
Statement Version, if I drilldown in details, I can
see Item No, Chart of Acc, From Accountm To Account D,
C.
when I do a F1 on the fields, I can see that it is a
structure. How can I know in which Tables are the
fields store?Hi Ankit,
There are no rules or guidelines for finding the table but i will share some of the tips used generally.........but i am not sure if we can do it for a tree structure..but try anyways....
Double click on the structure name seen on the F1 pop up window...
in the structure screen, try to analyse the field which is very important something like a key in that set of fields or do the same for the fields which we feel are more important,then click on the domain for that field....once in the domain..click on the "where used list for the domain" on the top...
it will display a pop up -> select only "table" and then press "Tick/OK"..A list will be displayed with the data element and table name ..from this we need to find out the right one we need either by going for text of the table or going through each and every one
It takes time but does the job.....
Regards
Byju -
How can i figure out the answers to my security questions if i forgot the answers
how can i figure out the answers to my security questions if i forgot the answers
Welcome to the Apple Community.
Start here, and reset your password, you will receive an email with your new password, then go tomanage your account > Password and Security and change your security questions.
If that doesn't help you might try contacting Apple through iTunes Store Support -
Newsstand shows a "1" but I can't figure out which magazine needs updating. Help?
I have no idea why you are doing what you are doing so I will make a couple of related points.
1. Put your table partition, and its indexes, into a single tablespace and leave them there. If you do not understand why there has been volumes written on the subject by everyone from Tom Kyte, Jonathan Lewis, Richard Foote, etc. Essentially the entire membership of the Oak Table Network has weighed in on this one.
2. If you are going to create partitioned indexes leverage the built-in capabilities in DBMS_PCLXUTIL.
http://www.morganslibrary.org/reference/dbms_pclxutil.html -
How can I find out what objects are in a datafile???
My database is 8.1.7...
I have a tablespace with multiple datafiles. How can I find out what objects are in a specific datafile???
Thanks in advance...DBA_SEGMENTS
DBA_SEGMENTS describes the storage allocated for all segments in the database.
Related View
USER_SEGMENTS describes the storage allocated for the segments owned by the current user's objects. This view does not display the OWNER, HEADER_FILE, HEADER_BLOCK, or RELATIVE_FNO columns.
Column Datatype NULL Description
OWNER
VARCHAR2(30)
Username of the segment owner
SEGMENT_NAME
VARCHAR2(81)
Name, if any, of the segment
PARTITION_NAME
VARCHAR2(30)
Object Partition Name (Set to NULL for non-partitioned objects)
SEGMENT_TYPE
VARCHAR2(17)
Type of segment: INDEX PARTITION, TABLE PARTITION, TABLE, CLUSTER, INDEX, ROLLBACK, DEFERRED ROLLBACK, TEMPORARY, CACHE, LOBSEGMENT and LOBINDEX
TABLESPACE_NAME
VARCHAR2(30)
Name of the tablespace containing the segment
HEADER_FILE
NUMBER
ID of the file containing the segment header
HEADER_BLOCK
NUMBER
ID of the block containing the segment header
BYTES
NUMBER
Size in bytes, of the segment
BLOCKS
NUMBER
Size, in Oracle blocks, of the segment
EXTENTS
NUMBER
Number of extents allocated to the segment
INITIAL_EXTENT
NUMBER
Size in bytes requested for the initial extent of the segment at create time. (Oracle rounds the extent size to multiples of 5 blocks if the requested size is greater than 5 blocks.)
NEXT_EXTENT
NUMBER
Size in bytes of the next extent to be allocated to the segment
MIN_EXTENTS
NUMBER
Minimum number of extents allowed in the segment
MAX_EXTENTS
NUMBER
Maximum number of extents allowed in the segment
PCT_INCREASE
NUMBER
Percent by which to increase the size of the next extent to be allocated
FREELISTS
NUMBER
Number of process freelists allocated to this segment
FREELIST_GROUPS
NUMBER
Number of freelist groups allocated to this segment
RELATIVE_FNO
NUMBER
Relative file number of the segment header
BUFFER_POOL
VARCHAR2(7)
Default buffer pool for the object
This view with this another viwe can help you to identify where the object is:
DBA_DATA_FILES
DBA_DATA_FILES describes database files.
Column Datatype NULL Description
FILE_NAME
VARCHAR2(513)
Name of the database file
FILE_ID
NUMBER
NOT NULL
File identifier number of the database file
TABLESPACE_NAME
VARCHAR2(30)
NOT NULL
Name of the tablespace to which the file belongs
BYTES
NUMBER
Size of the file in bytes
BLOCKS
NUMBER
NOT NULL
Size of the file in Oracle blocks
STATUS
VARCHAR2(9)
File status: AVAILABLE or INVALID (INVALID means that the file number is not in use, for example, a file in a tablespace that was dropped)
RELATIVE_FNO
NUMBER
Relative file number
AUTOEXTENSIBLE
VARCHAR2(3)
Autoextensible indicator
MAXBYTES
NUMBER
Maximum file size in bytes
MAXBLOCKS
NUMBER
Maximum file size in blocks
INCREMENT_BY
NUMBER
Autoextension increment
USER_BYTES
NUMBER
Corresponding number of bytes
USER_BLOCKS
NUMBER
Number of blocks which can be used by the data
Joel Pérez
http://otn.oracle.com/experts
Maybe you are looking for
-
We have users that share a remote desktop server, Windows 2012 R2. We use Adobe Acrobat 9.0.0 standard and professional. Is there a conflict in software or legality for allowing our users both these programs simultaneously on the remote Cloud serv
-
Hi Gurus, I have a problem with this method. When I'm passin to it table of strings I'm getting short dump. Something about RFC and XML. In my opinion this is error in SAP coding, but maybe I'm wrong. Has anyone this kind of problems with this method
-
Printing a tree in abap report
Hello Experts! I want to make an ALV tree... but only show the part of the tree (not the columns of the table How can i do this? Thanks a lot! Edited by: Mariano Gallicchio on Jul 3, 2009 4:21 PM
-
JScrollPane focus lost - graphics messed up.
Hello, Before I start explaining my problem I would like to apologize for the fact that I couldn't find a solution for my problem on the forum although there are many topics covering problems with this widget . I have a JEditorPane inside a JScrollPa
-
What IOS will I need to configure analogue voice ports on a 1760 router? I've tried following the IOS selector but most of the releases it suggests are deferred.