How can Logic make tracks slow down like an old record slowing down?

If anyone skilled know this, I need to get my entire tracks to " slows down" as a record that just loosing the motor....I have audio tracks and some spectronics /ESX24 also in the set.
I need to make this goes down and efter 1 second to speed up again...
I am working in 48Khz and Logic 9.1.1 and 5.1 sorround.
Maybe I am missing something easy, or maybe it is are harder to get.....
Hopefully a "mastermind" can help me out!
Message was edited by: Host (to clarify subject)

Danke, thank you....!!
I was messing around with flex and felt it was not really obvious to make it there.....
I will do this!
Thanks for helping me out here!

Similar Messages

How can I drag contacts into numbers like the old version?

How can I drag contacts into numbers like the old version?

Copy and paste works. But drag and drop is also back in version 3.2. It works well here. Just drag and drop onto the canvas.Make sure you've upgraded to version 3.2 as earlier versions of Number 3 did not support drag and drop from Contacts.
Note that the column headers are misaligned if you are dragging contacts that do not contain an image. But the information in the body of the table drags in correctly.
SG

How can i make it? (something like 'Feather effect')

Hi.
I get some object to other design company.
There is AI file in URL(illustrator CS3 version file)
http://www1.datafilehost.com/d/f873f882
it's looks like 'Feather effect'. but it's not.
it's not possible to copy to below Script code.
Sel[i].duplicate(newGroup, ElementPlacement.PLACEATEND);
So i started wonder about it.
How can i make this object?
and, How can i copy this object to script code?
Thanks you.

ohh.. thank you for your reply. But, I found another problem.
Copy is not problem. Real problem is 'translate'.
I want copy and translate to right side.
my source code is :
var aDoc = app.activeDocument;
var Sel = aDoc.selection;
var aLayer = aDoc.layers.add();
var newGroup = aLayer.groupItems.add();
Sel[0].duplicate(newGroup, ElementPlacement.PLACEATEND);
newGroup.translate(10, 0);
this is capture image.
I did run script five times.
Object was translate. but circle was not translate.
And, i upload Appearance palette capture image too.
It's not image. It's Path.
If you Know solution, reply for me please.
thank you pixxxel.

How can I make a photo look like it's on a 3D Box Canvas?

Hi,
I have been scratching my head trying to figure out a way to make a photo look like it's wrapped around a wooden frame, like on a box canvas. I'm not concerned with the canvas texture, I just want to know how I can apply an effect or an action to a single image to give it depth. Any ideas?
Ross

the one i posted was a psd file using a smart object. Double click the smart object it then opens a new file, you add the photo you need, as you from the example that image is wide screen, my photo wasn't, so you use the 2nd file to make the photo fit how you want, then save and it then alters the original file, hence smart object. The background too was one, hence the perspective.
The splicing etc is ok , as you say if you have an odd one to do.
So essentially you make up the smart object once and then reuse. As you woudl need to make the canvas / canvas's into several templates for your liking, be it square / portrait / landscape or even spread over several canvases
The example i showed here is an illusion, but a pretty good one, It NOT 3d. Its done with shadows, this is the smart object.
as you see its just a perspective rectangle with the top and bottom left cropped off for the depth.
these are the psd layers as you see there are only 5, its not an action, but googling i did see an action, i think it was $35. But as i said bear in mind the amount of possible boaard canvases you may want.
2 of the other layers as you see are for the lighting and the top one is the 3d illusion effect, this particular one has the canvas effect too. I can't remember where i got this one from. I think graphic river do 3d canvas though, there will be others.
Another thing to consider if using an action is if it can do multiple boards. like ...
again just to show you before the illusion
Pretty much example like the emboss effect you can use, all done with lighting and darkness.
http://graphicriver.net/item/more-canvas-mockups/2581097?ref=riverpsd
http://graphicriver.net/item/canvas-mockups/917210?ref=riverpsd
there will be other avenues if you google

How can i make my mac run like new

What can I do to make my computer run like when I first bought? Thanks

I am confused. You posted in the FaceTime for Mac Forum and your profile says iPhone and iOS. So what is you are asking about here that is performing slowly? More details would really help.
Allan

How can I make Firefox remember new passwords for old accounts?

I have recently moved to a new notebook computer. I used the "Password Exporter" add-on to import my passwords from my old machine.
Now, when I reach a Web page that I'd saved the user id and password for, it no longer appears in the fields and I have to start typing some of it, before Firefox offers it again.
Also, if a password has changed, when I enter the new one, Firefox won't offer to update that saved account with the new password - so I'm stuck with my old 'list' of accounts and their original passwords.
How can I fix these problems?

* Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode
* You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
* To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Uncheck: [ ] "Automatically start Firefox in a private browsing session"

How can I make a smart form like this one ?

hi
according to my business requirements I need to create a PDF form which contains a table with variable number of rows (containing numbers) , so the user should be able to add or remove rows to the table as much as he needs to , and there should be a row showing the total at the bottom of that table.
I'm absolutely sure that this is possible to be implemented in PDF using javascript but I need some help to do it.
I saw a working example - the same concept I required.
>> you could have a look here -
http://www.windjack.com/PDFSamples/ListPrograming_Part1_XFAForm.pdf
any idea how I can do so ?
thank you.

hi George
thank you for helping.
I thought about the same idea >> to add fields and hide them and then show them one by one upon to user reuest , but I think that will solve just a part of the problem regarding the functionality ,,, while the formatting issue won't be solved ,,, I mean look at the form I linked to ,,, the table borders and final appearance remains the same even after adding a new row.
is it possible to do so if I used AcroForm and hide the fields ?
and how will I get the total of those variable number of rows after user finished adding rows ?
regarding the other thing you mentioned (pushing items down as new rows are added) ,,, I think I can avoid this by adding the table in a separate page ,,, because according to my business requirements ,,, rows that will be added won't exceed 30 maximum.
thank you for your time.

Hy, how can i make filter in numbers, like in excel? can anybody help me?

i am new in mac, and of course in numbers, until now i use exel, and i know to work with it, but now i want to use numbers, so...i want to make a filter like in excel.but i don.t know how.
Thanks.

Hi,
The screen shot didn't really clarify the question for me.
Here's what Jerry was describing, the Reorganization panel, Numbers's equivalent to the 'Denumire' panel shown in your screen shot:
It's currently set to show only rows of the table where the temperature is recorded as between 11 and 13 °C. I've clicked the + button to the right of that condition to add a second, but have not started to build that condition yet.
Regards,
Barry

How can i make my macbook pro run faster? seems slower then usual. :(

okay, so my macbook pro lately seems to be going slow, well, its been gradually getting worse and worse.
i am getting the rainbow wheel thingy just about every time i click onto a new button.
i have SOPHOS (antivirus) installed, have never installed any antivirus or mackeeper ****.
i usually only have safari and maybe itunes open.
2.2GHz Intel Core i7 8 GB 1333 MHz DDR3 RAM (MEMORY) OSX 10.8.4 15 inch screen 350GB free hard drive space
ANY HELP WILL BE GREATLY APPRECIATED!

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

How can I make my computer faster like it used to be?

My computer is slow to load everything and slow to switch between programs.

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

How can i make my ipad mobile like my iphone?

I purchased my ipad from BestBuy....is there a way I can access the internet at all times? i.e. driving, while at the beach, in an area that has no internet connections. Basically like my iphone?

Your iPhone uses 3G or 4G to access the internet. Unless your iPad is a 3G version you will need a mobile WiFi hotspot for internet access on the beach, or in any area that does not have WiFi access.
There are many mobile hotspots available on the market, but you will also have to purchase a data plan as well.
http://www.google.com/search?client=safari&rls=en&q=Mobile+WiFi+hotspot+devices& ie=UTF-8&oe=UTF-8

How can I make my voice sound like Obama?

I am new to this software and I have a project in which I need to turn my voice into Obama's. Any help would be much appreciated...

Software can't do this for you. It may be able to help a little by adjusting certain frequencies and applying a little pitch adjustment. But you have to find the correct delivery and tone to perform the voice. That's how impressionist acts earn their money.

How can I make Preview behave more like it used to?

I use Preview a LOT for doing things like annotating screenshots for IT helpdesk stuff.
In 10.9 it was invaluable; but the version in 10.10 seems to be a bad step backwards. I used to be able to select a tool, like text, a line, or oval, for example, and it would stick, and let me draw the item where I wanted it to go, like an actual graphics program.
Now I have to reselect the tool each time, and it plops some default shape in the middle of the image that I then have to drag and resize to suit my needs. Needless to say this is making my task annoyingly repetitive and longer than necessary. The preferences are useless. Any hints or secrets to m,making Preview a useful graphics tool again?

I use Preview a LOT for doing things like annotating screenshots for IT helpdesk stuff.
In 10.9 it was invaluable; but the version in 10.10 seems to be a bad step backwards. I used to be able to select a tool, like text, a line, or oval, for example, and it would stick, and let me draw the item where I wanted it to go, like an actual graphics program.
Now I have to reselect the tool each time, and it plops some default shape in the middle of the image that I then have to drag and resize to suit my needs. Needless to say this is making my task annoyingly repetitive and longer than necessary. The preferences are useless. Any hints or secrets to m,making Preview a useful graphics tool again?

How can I make my iPad mini faster?its kinda slow...

Is there any suggestions

(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset

How can I make sure I only have single address records across all my devices?

Hi everyone - I have single address records on iCloud at the moment and on my iPhone BUT I seem to have double records on my iMac. All I want is one record per person across all devices? Thanks.

Welcome to the Apple Community.
One reason you may have duplicates is that you have each contact listed under your 'iCloud' account AND under your 'on my mac' account. Only contacts in the iCloud account will sync.
This user tip might help you understand how accounts work with Address Book.

How can Logic make tracks slow down like an old record slowing down?

Similar Messages

Maybe you are looking for