How Can Mac Mini drive USB External Soundblaster 5.1 box

I'm replacing my old Dell PC with a Mac Mini. I'd like to use the 5.1 speakers the Dell drove with an Audigy soundblaster 5.1 card. So... I'm trying to find out if the USB External 5.1 Soundblaster box would allow the mac mini to drive those speakers. Creative Labs (soundblaster mfr) drivers for the soundblaster do not support macs. So, are there OSx SW drivers from some other source for the USB soundblaster? Or, would I have to run Windows 7 on the Mac mini via VMware or Parallels, or lastly, only via BootCamp?

Welcome to Apple Support Communities.
Soundblaster will work in Windows throught Bootcamp. Via VMware or Parallels is unsure.

Similar Messages

How can I share external devices connected to my Mac mini via USB on a wired network.

Own a Mac mini with Mountain Lion. Purchased the server app. The Mac mini is connected to a wired network with Mac’s and Windows machines. I have an external hard drive and 2 printers connected to the MAC mini via USB. I would like to share these devices with other computers on the wired network. Although I have attached similar devices with an airport extreme in the past, I am unable to use a wireless router in this case. Any suggestions on making this work with my current setup?

You don't really even need server app to do this. Simply go to System Preferences | Sharing and turn on both File & Printer sharing. Then, for example, the printer (not relevant what connection it has but obviously USB is fine) will be available to everyone on the wired network.
That's all there is to it - unless I missed/misunderstood something re: your setup which seems very straightforward.

How can I transfer pictures from my old Mac mini to an external hard drive?

HHow can I transfer pictures from my old Mac mini to an external hard drive? Thanks.

Normally you should be able to drag and drop them onto the drive, provided the drive is Mac formatted. Have you already tried that?
Matt

How to transfer photos from a MAC to a USB external storage drive?

How to transfer photos from a MAC to a USB external storage drive?

Just the Photos? Or the Library?
If it's the Library:
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

Can I use a Power PC non intel Mac Mini as an external HD with my iMac 3.06

Can I use a Power PC non intel Mac Mini as an external HD with my iMac 3.06 Intel Core Duo
I can't figure out how to get this to work. Is it possible?

WildBull wrote:
Will it work if I connect via usb instead of firewire?
No. There is no "USB Target Disk Mode".
Just so we're clear, when you start your Mac mini in FireWire Target Disk Mode (TDM - holding T on startup), do you see a FireWire icon on the Mac mini's display? IIRC, it's not required that the Mac mini be connected to a display for TDM, but it would help diagnose whether or not the mini is actually starting in this mode.

Mac mini as an external hard drive

Can I use a mac mini as an external hard drive? if i can how do I make the connection?

You would restart the mini while holding down the T key on the attached keyboard. This puts the mini into Firewire target mode. Assuming the mini is attached to a monitor, you will see a moving Firewire logo on the screen indicating the mini is in target mode.
From there, all you have to do is plug it into the FW port on a second computer and it will look just like a hard drive to the other computer.

I am using earphones, but the external audio of my mini ipad is still on. How can I turn off the external audio while listening with my headset?

I am using earphones, but the external audio of my mini ipad is still on. How can I turn off the external audio while listening with my headset/earphones?

Other than iMovie, GB always incorporates the audio files into the GB package. So just save or move the GB project to the external drive, and you're done - anything you import, edit or record will be saved to the external drive.

Can I use a usb external hard drive larger than 2TB? I have tried to use a 3TB but it shows up as 800GB.

Can I use a usb external hard drive larger than 2TB? I have tried to use a 3TB but it shows up as 800GB. Even tred to reformat in disk utility but only shows as 800 gb as well. It is a Seagate 3TB harddrive and enclosure. Nothing on the Seagate site about it other than it says Mac os through 10.6 is supported for larger than 2TB (might be old).

You might have better luck in the Snow Leopard community. I'll ask the hosts to relocate your post.
10.6 Snow Leopard

Mac mini as an external optical drive

Can the mac mini intel be used as an esternal optical drive. can i hook it up to my ultra portable laptop (which doesn't have an optical drive) and use my mac mini as an external dvd and a dvd writer?

Can the mac mini intel be used as an esternal optical
drive. can i hook it up to my ultra portable laptop
(which doesn't have an optical drive) and use my mac
mini as an external dvd and a dvd writer?
Why on earth would you want to do that? An external USB2.0 DVD burner for your laptop would be barely more than $100, while a Mac mini with standard DVD burner would cost you $799!
If you have a good reason to want to do this, it's easier to use an external Mac as an optical drive for you laptop if the laptop is a Mac because then the mini can be mounted on the Mac as an external drive using Firewire target disk mode. Hence the mention of firewire in the prior response. However, if the mini is being connected to a PC, it's not so easy. You could simply connect the two via ethernet, and switch on sharing between the two systems, but you would need to control the actual burning of files to the optical drive from the Mac - which would either require a keyboard, mouse and screen for the mini, or software on the PC to control the mini remotely. Very inelegant.

Can't reach network video server on Mac Mini's USB Ethernet Adapter.

I am trying to connect an IP video server to my Mac Mini's USB>Ethernet adapter. The server works fine on the built in Ethernet "en(0)", but is unreachable on the USB>Ethernet adapter network"en(3)".
Is this a subnet issue? I don't know much about networking obviously, but I think I just need to find a way to designate the proper port to look on, because the Mac is looking on the built in Ethernet only when I specify http://192.168.0.90:80/
The en(3) is configured for DCHP.
I could just hook the server up to the built in Ethernet, but then I'll have to run new and very long cat 5 cable.
I'd love to hear any ideas on how to get this working.

The Network Settings for the USB>Ethernet port are:
IPv4: Using DHCP
IP Address 169.254.33.152
Subnet Mask: 255.255.0.0
Router: (none)
DNS Server: (none)
Search Domains: (none)

How can i get a usb cable on my I mac GS

How can i get a usb cable on my i mac Gs i want to know how to do it
is there any directions to help me out. Thanx

Well, you posted this question in the iMac forum and since you do not have your system info listed in your signature, we all assumed that you were asking about an iMac - not an eMac. That's why out pics do not make any sense.
Yes, the eMac has USB ports also. They are the second, third, and fourth ports back from the front - the ones after the small circular headphone style jacks.

HT4941 how many mac mini can you connect to a thunder bolt display

how many mac minis can you you connect to a thunder bolt display and if so how do you switch between them

Here's the official page on connection options (you can connect one computer to a display).
http://support.apple.com/kb/HT4885
I've read elsewhere that you can connect two computers to the Thunderbolt Display, but you can't switch between them per se. You can only power up one at a time. Anyone, feel free to correct me on this, but my understanding is this is not an officially supported configuration.

How can i reactivate a usb peripheral on mac osx 10.6.8

Hi i'm a frenchman, i'd lite to know how can i reactivate a usb peripheral wich has been deactivate by the computer because it run most energy, thanks.

The idea is that restarting it will reset the ports. This is not a common solution because ports usually work and do not require such attention. It is likely the port is defective. It may well be a poor contact.
I don't know what type of computer you have, but It would likely have Firewire ports as well, which will work just as well as USB. So, even if you have one less USB port than you want, you can make use of the Firewire port instead.
Some general information;
http://support.apple.com/kb/HT1151

Mac Mini and USB 2.0 hubs (hubs stop working within a month)

I have an aluminum Mini running OSX 10.6.6 (Snow Leopard). With only 4 USB ports, I have need of a USB hub to accommodate my external drives and other peripherals: keyboard/mouse, camera and iPhone have to use the existing ports in the Mini (difficult access to ports due to space limitations), leaving one port for up to 4 external drives (older drives 40-60gb used for backup and extra storage).
I have problems using powered USB 2.0 hubs with this computer; I have 'burned out' 2 hubs since buying the Mini in February. They just flat out stop working, though they still show power (the power indicator light on the hubs); no peripheral is recognized when plugged into the hub (which worked fine for about a month). I can unplug the 'must use Mini ports' (camera, iPhone, charger, etc) and the peripheral drives are recognized and work normally when plugged directly into the Mini ports.
One hub was a Belkin 4-port hub (about 1 year old) and the other was a GE 3-port hub with several flash card readers (19-in-1 card reader), also about a year old. Is there any reasonable explanation why powered hubs would suddenly stop working, related to use with the Mac Mini 2010 aluminum version?
I had worse problems with the USB ports in an old (~2006) Mac Mini (out of warranty), where the USB ports in the Mini stopped working, which is partly why I bought the new mini. In light of this tidbit, (be honest, please) are there known issues with Mac Minis and USB?

Each of the external drives has its own power supply; I generally only use one drive at any one time, but on rare occasions I have powered up more than one to confirm or transfer files. I don't leave any of those drives on when not in use, and when everything is working I properly eject/unmount them before turning them off.
There have been times when I powered up a drive connected to a powered hub and both the hub and the drive indicated activity but the drive didn't mount. On those occasions the drives sometimes would not appear in Disk Utility, and other times would appear, but would not be "mountable". I didn't know what the best way to deal with that was, so I would just turn the drive off, hoping the lack of mounting on the desktop meant no real drive activity was occurring and I wouldn't risk data loss or drive damage. So far all the drives seem to work fine when plugged directly into the back of the mini.
The main external hard drive I was using when the Belkin hub failed (iomega 40g) is USB 2.0 only (no firewire). I have another drive that is only firewire (la cie 60g)... so it wasn't a factor. Two other external drives are ACOM, one 40g one 120g, and then there's my old iMac G5 disk (display fizzled and everything but the disk recycled through Apple's recycling program) which is mounted in an external enclosure and is part of the USB contingent, but is not being used for anything but backup (all three both USB 2 and FW400 capable). (I know, too many toys... but why throw them out?)
The USB hubs both had their own power supplies, too, and I never used them without power (though I tried it as part of troubleshooting, before reading the Apple article on USB and power requirements). Other USB devices that only work when plugged into the mac directly are my Epson Stylus CX4800 all-in-one, and my Radio Shark.
So, whaddya think? Should I risk buying another powered USB hub or just live with plugging in peripherals to one available USB port (through a short USB 2.0 extension) and only use one at a time? That would be a bit of a pain, but if there are no issues you've heard of with Mac USB ports (several unanswered questions in the Mini Support forums here involving USB and peripherals, I noticed), what else would explain the seemingly short lives of USB hubs?
Oh, here's something I just remembered: the last time the Belkin hub was working (last night), I had my Radtech BT mouse charger cable plugged in (not charging, mouse not attached) along with two of the external hard drives, and my Fuji camera USB cable. I got an error message onscreen (on the Mini) that a drive had been improperly ejected (or put away?), yet the hard drive in question was still mounted on the desktop. I looked at the hub, and the loose ends of the charger and the camera USB cable were touching. Could that have caused the error (and maybe the hub to fail)? (Edit: the camera cable I think was plugged into the mini's one available port; 3 external drives and the mouse charger were plugged into the hub, _but only one drive powered up and in use (3rd edit)_. The camera end of its USB cable contacted the mini-plug end of the mouse charger... could that have short-circuited the hub? +That wouldn't explain the failure of the GE hub a couple weeks before... but I don't know if any of this is connected, so to speak--2nd edit.+)
Message was edited by: blick
Message was edited by: blick
Message was edited by: blick

Install Windows 7 on a Mid 2010 Mac mini using USB or SD media?

Is is possible to install Windows 7 on a Mid 2010 Mac mini using USB or SD media? I have not figured this out. Here's what I have observed:
I can install OS X Lion using USB or SD media. Both are detected in the boot menu, and will boot.
An SD card with Windows 7 installation files formatted MBR/FAT32 using diskpart appears (with an SD card icon) in the boot menu but when selected as a boot device, the boot fails and the existing OS X instance on the Macintosh HD starts. A USB stick formatted as described does not appear in th boot menu at all.
An SD card or a USB stick formatted as described will boot on a Mid 2011 MacBook Air, and can be used to install Windows 7.
Is this due to EFI differences between a Mid 2010 Mac mini and a Mid 2011 MacBook Air?
Thanks.

The Mac Mini Mid 2010 has a DVD player built in, you can startup and install from a Windows 7 DVD. The Mac Mini Mid 2011 does not have a DVD player built in. I am happy that in new computers I can make use of an USB-stick to install Windows 7. Windows 7 uses MBR and Mac OS X uses EFI and that is why it was not possible on a Mac Mini Mid 2010. I think the EFI on a Mac Mini Mid 2011 is different.
I should like a firmware update on my Mac Mini Mid 2010 if possible. In that case I could choose between DVD or USB stick if I want to install Windows 7.
I also have a FireWire CF Card Reader. I think it is not possible to install Windows 7 via FireWire too.
I do have an external USB HD with 2 partitions: Mac OS X 10.6.8 and Windows 7, but is is not possible to start up Windows 7 from the external HD. It is possible to start up Mac OS X 10.6.8 from the external HD on a Mac Mini Mid 2010.

How Can Mac Mini drive USB External Soundblaster 5.1 box

Similar Messages

Maybe you are looking for