How can make a 2 windows partition ?

Hi mac users ,
I have a 20" imac intel based and I want to install win xp in imac and i need a 2 partition for windows the first 40GB for installing windows and second 100GB(NTFS) for windows data .
Please help me how can I do this ?
iMac 20" Mac OS X (10.4.8)

Hi everybody ,
when I buy my iMac 24" I need to install win XP and OS X together and third partition for saving my stuff and work , after installing bootcamp I install xp and trying to resize one of my partition ( XP and OSX ) with different software such as iPartition and volumeworks and partiotion magic , ... but no one work for me .
after that I trying to install xp without Bootcamp .
I boot from my instalation DVD and make my hard drive to 3 partition and set my third partition to MS-DOS Format .
after Boot From XP cd and install Windows Xp in third partition and just installing Bootcamp Driver ( I make it befor ) after installing xp I install OSX too in my first partition and in this position I have a second partiotion to save my stuff and work .
Have a Good Day Every Mac Users .
Enjoy Using Apple Computer .
iMac 24" and macmini 1.66 Mac OS X (10.4.8)

Similar Messages

How can I get my Windows Partition to be a startup disk?

I have Tiger 10.4.11, I had boot camp, Running Vista, Just fine for months.
I recently had a problem, within vista which caused a problem with the hard drive/master boot record which wouldn't allow Vista to boot anymore and actually reported "missing operating system".
Previously if I did nothing, after powering on my MacBook, it would default to the Windows partition and start it up (Vista).
Of course I could change this from the "startup disk" applet from within Tiger or I could use boot camp from within Vista.
I have since been able to fix my Vista related startup issue, however at present the MacBook is booting into Tiger by default.
I can HOLD the OPTION key and select either OS.
From the "startup disk" applet within Tiger, it no longer shows "Windows" as a startup option which seems to be an indicator of a problem with Tiger of how it sees the hard drive and/or partition.
I ran disk utility, no change.
How can I make Windows appear as an option in the "startup disk" applet within Tiger?
I can use Boot Camp within Vista, to select the "Windows" disk to restart from, and that works, but I would like to restore full functionality to Tiger.
Thank you and please advise,
Joe

Hello and Welcome to Apple Discussions ...
You will receive better exposure to your query in the BootCamp forum:
http://discussions.apple.com/category.jspa?categoryID=237
Carolyn

How can make a little window

with jsp and that window return me a value some one have idea? thanks.

well my problem is:
i have one jip with 20 options (buttons) so each time that push one option, I will open a window with data from my DB and when the user close de options window send return the values of the options selected.
I hope you can stand thanks a lot.

How can I create a new partition to install Windows 7 by not using Bootcamp

How can I create a new partition to install Windows 7 by not using Bootcamp?

If you want to dualboot you have to use boot camp i think. I think you have already a full disc and cannot make another partition I'm I right?
Your question seems a bit blurry so I'm giving you a general tip here.
If you want to just try the beta you can always use Sun's "Virtualbox".

How can I remove the BootCamp partition? as the size i created ws too small to install MS Office on 64Bit Windows 8.1 on MacBook Pro (Aug'13)

How can I remove the BootCamp partition drive for Windows 8.1, as the size which I created was too small for me to install Microsoft Office onto Windows 8.1 64-BIt. The machine which I have is the MacBook Pro 13' inch purchased in August 2013.

Either use Paragon's CampTuneX to resize it or use Boot Camp Assistant to remove the partition and restore the drive to one partition. Then create a new, larger Boot Camp partition. This will remove/delete/erase your Windows system.

How do I delete a Windows partition and resize the MAC HD partition to orig

How do I delete a Windows partition and resize the MAC HD partition to original? I am new to Mac and created a very large Windows partition and need to delete it and get back. To make matters worse, I do not have a drive configured for Time Machine.
Okay, I'm stupid and jumped the gun. but can anyone help this poor fool?
Richard

Okay, after lots of Google-ing, I finally decided to follow the ru - WAEFRTFI - and found the answer in the Boot Camp Installation Setup pdf on p. 22.
Richard

How can I install new windows on NB200-10z without a CD drive?

Hi,
I have a mini laptop "Toshiba nb200-10z" and it doesnt startup anymore.
I would like to do a recovery, but it also doesnt work.
I know there is a shortcut like press the 0 button when the laptop is starting up.
With this shortcut you can start the recovery to reset the software.
But when I press the 0 button it gives me an error.
So I think the recovery drive/partition is lost.
How can I install new windows on this minilaptop without a CD drive?

I have found a much easier way to install Windows 7 from a USB Flash drive. Unlike other methods where you have to write complicated commands, this method can be completed even by those who have very little computer background.
The whole process takes only two steps, run UNetbootin, load the Windows 7 ISO file, and finally restart your computer.
Before you begin, you will require the following:
USB Flash Drive (4GB minimum)
Windows 7 ISO Image file
UNetbootin
Note: If UNetbootin doesnt work, try out the Microsofts official tool called Windows 7 USB/DVD Tool.
Now insert the USB drive, run UNetbootin, and select Disk Image as ISO. Browse your local drive for Windows 7 ISO that you downloaded and click Open. Now Select Type as USB and choose the drive. Once done, it will look like a bit similar to the screenshot shown below.
Click OK and it will begin extracting all installation files to the USB drive. The whole process will take some time (10-15 minutes), so have patience.
Once the installation is complete, reboot your computer. Now while your system is starting up press the appropriate button (usually F1, F2, F12, ESC, Backspace, or Escape) to bring up Bios Boot Menu.
Change the startup order to boot USB by default, usually you will have to press F6 to move the selected USB device on top. Once done, save changes and restart the system.
+Message was edited: link has been removed+

How can I change the window size of iTunes? Used to be easy before installing Mavericks.

How can I change the window size of iTunes on my iMac? Used to be easy before installing Mavericks.

If you want to make the itunes tab so you can see the dock
you press the
esc
button if your in full screen mode
if you want to get into full screen mode you press the arrows facing away from eachother in the top right corner
there is another way to get to the normal tab if your in full screen
make the curser go right up to the top of the screen and it will show the apple tab
it will have two arrows facing together highlited in blue
if u tap that it will take you to the normal tab

Can i have my windows partition on an external drive?

hello all,
alright, so im looking at a laptop for college and after much research and a few trips to the apple store i want the new, 13-inch macbook pro, with retina display and a 256GB flash hard drive. i love this computer in every aspect except.... you guessed it, its small hard drive. i can always get external drives to make up the differance though, and their is always the cloud so i dont think ill have too much of a problem. but i do need to use some software for college that is only windows based. so rather then splitting up this already small hard drive can i just install windows onto my mac (because i already know i cant put windows on an external drive with boot camp) and make the entire windows partition on the external drive? this way im not losing any native space besides that used to hold windows and im not installing windows to an external drive so hopefully bootcamp wont have a hissey fit. can anyone tell me if this will work? or if this wont work can anyone give me any other solutions to having windows on my mac without splitting up my native hard drive? such as installing windows to my mac and making the partition in the cloud or something? just anything so i dont have to split my already small, yet extremally fast, 256GB hard drive.

You can install Windows on your internal drive and store your Windows data on any drive you want to use. Keep in mind that any Windows programs you install in Windows will be installed on your internal drive. So make the Boot Camp partition large enough for Windows and any programs you may install now or in the future. You will also need room for swap/page files and other activities such as installing Windows updates.
100GB will likely be a good size for the Boot Camp partition given that it is unknown what programs you will be installing.

How to make IIS on Windows 7 visible from outside my home LAN

Guidance Needed: How to make IIS on Windows 7 visible from outside my home LAN.
I am building a learning/demo ASP.NET website on this Win7 PC, using VS2008.
I would like to share the website with a client/friend, so I need my local IIS to be visible from outside the home LAN.
This PC is behind a Netgear WGR614 router, which has a static IP address assigned by my ISP.
I have set up port forwarding on the router; port 80 is HTTP.
I can see the website as http://localhost/ and also as http://192.168.0.2 from other PCs inside the LAN.
Ping works from outside, but not http. What am I missing?

Hi,
Since this question is related to IIS and we have specific support for IIS related issues or questions, it is also recommended that you go to IIS Forum for help.
Hope this helps. Thanks.
Nicholas Li - MSFT

Can't create a windows partition with bootcamp

Hi
i have a MacBook Air. Standard, no changes from my side.
I have the newest Lion update and BootCamp in Version 4.
So, now i want to install Windows 7 64 Bit.
I start BootCamp Assistant.
The first point, is grey. i can't activate it. This point is to create a Windows 7 Install Disk
Second Point is to download the drivers and so on. This is working. I have the stuff on a usb stick.
Third Point is to create/install Windows 7. So, i have the posibility to decide how big i want my windows partition. 20-32 GB.
when i click on create button. There comes a pop up "Installtions CD is not found"
I have a bootable Windows 7 USB Stick (8 GB - Fat32). The Stick works. When i boot with refit from the stick, the Windows 7 installation starts. But without a partition ... not so good :-)
So, what can i do now? BootCamp don`t want the Windows USB Stick.
I need help :-)
Thanks

undefiniert wrote:
Hi
i have a MacBook Air. Standard, no changes from my side.
I have the newest Lion update and BootCamp in Version 4.
So, now i want to install Windows 7 64 Bit.
I start BootCamp Assistant.
The first point, is grey. i can't activate it. This point is to create a Windows 7 Install Disk
Second Point is to download the drivers and so on. This is working. I have the stuff on a usb stick.
Third Point is to create/install Windows 7. So, i have the posibility to decide how big i want my windows partition. 20-32 GB.
when i click on create button. There comes a pop up "Installtions CD is not found"
I have a bootable Windows 7 USB Stick (8 GB - Fat32). The Stick works. When i boot with refit from the stick, the Windows 7 installation starts. But without a partition ... not so good :-)
So, what can i do now? BootCamp don`t want the Windows USB Stick.
I need help :-)
Thanks
You will need a windows install DVD, and 50 to 60G partition.

How can i navigate between windows?

Hi.
Experts
I want to navigate between windows.Because i am making a project of Guest House management in webDynpro.So many many screens are there to built and link.I am planning to make a single webdynpro component for it.
Is this right?If yes Tell me how can i navigate between windows.
(like room request to allocate room and many other window).
Regards
Sunny.

HI Sunny
If You want to make a window DEFAULT follow these steps
1) Suppose if you have 2 windows say Window1 and Window2
2) Double Click on your Application
3) In Application Properties -->Interface View
you will get two interface views Window1InterfaceView and Window2InterfaceView
4) Select which ever window you want to make as default
and make your view in desired window's DEFAULT property to true
Best Regards
Chaitanya.A

I am switching to Apple macbook pro from Windows laptop. Is Apple compatible with Microsoft Office? How can I transport from Windows to Mac? What I have saved on external hardrives, will I be able to open it on Mac?

I am switching to Apple macbook pro from Windows laptop. Is Apple compatible with Microsoft Office? How can I transport from Windows to Mac? What I have saved on external hardrives, will I be able to open it on Mac?

Is Apple compatible with Microsoft Office?
Any computer is compatible as long as it can read and write Office files. But for perfect (or at least near perfect) compatibility, you would want to purchase Office 2011 for Mac.
How can I transport from Windows to Mac?
You can't directly transport any installation of Windows. All PC's come with a machine specific version of Windows intended for that PC. They don't have all of the hardware drivers the retail disks cover.
If you want Windows on your Mac, you would first purchase a full version copy (NOT an upgrade disk) of Windows 7 or 8. Those are the only supported versions on newer Macs. You install it through the supplied Boot Camp utility that comes with the Mac to create a new partition for Windows, and then install the retail copy of Windows you purchased.
The reason only these versions of Windows are supported is the same basic reason as a machine specific version of Windows for a PC. Apple only includes the necessary Mac hardware drivers for Win 7 or 8 on new Macs.
Once Windows is installed, you could then install the version of Office for Windows you already own. The nuisance of a Boot Camp partition is that you have to physically boot to either Windows or OS X, so you can only use the apps of the OS you're in at the time. To use both at once, you'd have to use virtual machine software (Parallels, VMware, VirtualBox) and then install Windows within that. Then you'd be able to run Windows inside of OS X and have access to both at the same time.

CS3/CS4/CS5 Win/Mac: How can I convert a Windows string to mac?

Hi
I have a Windows coded string. I like to convert this string into a Macintosh string. This means several characters are changed, e.g. ä, ö or ü.
Is there a method in the Indesign SDK?
How can I convert a windows string into a macintosh string and back?
Thanks
Hans

I don't think this should work that way. If this string is in resource file, use UTF-8 encoding and make PMString do its job. use kResourceUTF8Encoded in StringTable:
resource StringTable (kSDKDefStringsResourceID + index_enUS)
        k_enUS,                                             // Locale Id
        kResourceUTF8Encoded,                         // Character encoding converter (irp) I made this WinToMac as we have a bias to generate on Win...
              // ----- Menu strings
                kWFPCompanyKey,                         kWFPCompanyValue,
                kWFPAboutMenuKey,                         kWFPPluginName "[US]...",
                kWFPPluginsMenuKey,                    kWFPPluginName "[US]",
                    kWFPDialogMenuItemKey,               "Show dialog[US]",
                kSDKDefAboutThisPlugInMenuKey,               kSDKDefAboutThisPlugInMenuValue_enUS,
                // ----- Command strings
                // ----- Window strings
                // ----- Panel/dialog strings
                    kWFPDialogTitleKey,     kWFPPluginName "[US]",
                    kWFP_Tuna_Key,     "Tuna",
                    kWFP_Salmon_Key,     "Salmon",
                    kWFP_Bonito_Key,     "Bonito",
                    kWFP_Yellowtail_Key, "Yellowtail",
                    kWFP_Currency_Key, "$",
          // ----- Misc strings
                kWFPAboutBoxStringKey,               kWFPPluginName " [US], version " kWFPVersion " by " kWFPAuthor "\n\n" kSDKDefCopyrightStandardValue "\n\n" kSDKDefPartnersStandardValue_enUS,
Message was edited by: Maciej Przepióra

How can I get a Windows Vista 32 bit version of Photoshop, please?

How can I get a Windows Vista 32 bit version of Photoshop, please?

Hi Kevinhannan,
No current Photoshop supports this configuration.
Photoshop CS5 was the last version of Photoshop to support Windows Vista.
Photoshop Elements 12 was the last version of Photoshop Elements to support Vista as well.
We no longer offer Photoshop CS5 or Elements 12.
You might look at Amazon to see if you can get either product listed above. Just be careful when purchasing, make sure you know who you're buying from!
Regards,
Pete

How can make a 2 windows partition ?

Similar Messages

Maybe you are looking for