How can my computer show fluid damage when I didn't spill on it?

How can my Mac Book Pro show water damage inside when I never spilled water on or near it?  My hard drive failed.  I brought it to Apple store to be repaired under Apple Care Warranty.  After it was opened I was told that it would not be covered under warranty due to fluid damage.  I was shocked because I never spilled on it.  I leave it in one place on a counter in my home.  I don't have little kids or others to spill on it.  They said it was dried like old fluid damage but guessed that it would have been 6-8 ounces.  I live in Wisconsin.  The house is very dry usually but our home April Air humidifier keeps house humidity more normal.  I put it into the original box and put it in my car for a few days until I was able to drive to Milwaukee to the Apple store.  The out door temperature was cold but the car was in the garage.  Could condensation alone look like this?  If that much fluid was spilled wouldn't it fail at that time?  The computer stopped one pm when I was using it for several hours.  At the store they hooked it up to their external hard drive and everything else seemed to work, and the plan was to replace the hard drive under warranty.  They called me later to say that after opening it they old dried fluid damage was identified and voided warrranty.  RAther that spend $1200+ to fix it seems that I should just buy a new computer.  I don't understand how this could happen and I certainly don't want it to happen again if I didn't spill on it.  Can anyone explain this?

No, no one can. No one has any better idea than you have about where your computer has been or how it has been treated.
If your computer is working normally apart from its hard drive having failed, it doesn't need to be repaired, apart from replacing the bad drive. You would be crazy to replace the whole thing at vast expense instead of buying a replacement drive for $100 or less and installing it yourself. Instructions for replacing the drive easily are in the little user guide that came with the machine.

Similar Messages

  • How can I delete an apple ID , when I didn't even verified the account ?

    Hi ,
    Can you please help on solving a problem . Long time ago I was trying to register an iPad with my email. A verification email was sent to that email,but I didnt verify it. Now I want to registe rwith that mail , but a message appears "this email is already in use" or sth like that. Please advise how to delete that account ( if exists) or to make new registration with my email address?
    thanks

    HI,
    Just because and Apple ID email is not verified does not mean the account is not created. (usable may be another matter)
    Are you trying to Login here with the Manage option.
    This will take you to the Apple ID page and tell you if there is an Verified Email as the Apple ID and whether there is a recovery email in use.
    There is a menu on the left to sort any Recovery email and set Security Questions.
    You are most likely to need to verify the Apple ID you were trying to create.
    10:03 pm      Saturday; June 7, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • How can I get my contacts back when they didn't copy in a back up or a restore?

    I did a complete back up of my songs, photo's and contacts and everything else. When I did the update and sync with new music all of contacts were deleted. When I tried to restore from older backups the contacts didn't return. Help please?

    What service do you sync your contacts with? iCloud? Yahoo? Gmail? Once you add that account back to your phone, your contacts should be restored.

  • How can I turn off the volume when I turning on my computer?

    Hi,
    how can I turn off the volume when my imac is turn on? later if i use it to listens music or whatever I can turn it on manually
    I don't want to sound that indicates the computer is on
    thanks
    adaltam

    Hello:
    Simply hit the mute key on your keyboard (found over the F10 key).
    Barry

  • How can an artist show as a search result yet not exist in the artist list?

    I'm trying to import music from the My Music folder on my computer. I followed the steps outlined in the iTunes tutorial. When I search for the song, the artist and album show as search results, but the song does not. When I follow the link from the search to the artist, iTunes goes to the artist list, and the one I am looking for is not in that list- where does the song go when I upload it into iTunes? And how can the artist show up in a search result as existing in Music, but not actually be in the artist list?

    Hi IWolbers,
    >>I have a recurring problem where all of a sudden I can no longer see the values of my variables when I debug my unit tests. I cannot find a pattern as to when this happens but I experience this across one of every 20 tests that I write. Occasionally
    this has also happened during normal debbuging of running code on my machine.
    So you mean that it worked well before, am I right? 
    If you debug the same app in other VS machine, does it work well? So we could make sure that whether it is related to the VS IDE.
    Please disable all add-ins in your VS IDE, and then reset your VS settings, debug it again.
    https://msdn.microsoft.com/en-us/library/ms247075(v=vs.100).aspx
    Or you could run your VS in safe mode, debug it again, at least, we could know that whether it is the add-in's issue.
    https://msdn.microsoft.com/en-us/library/ms241278.aspx
    To make sure that it is not the project files' issue, create a new blank solution, copy the project files to the new solution, clean and rebuild the solution, check the result.
    >>Once I step over this to the next line (screen shot 2) I get the error message 'The name '[variable name]' does not exist in the current context'
    How about debugging it with "Step Into" instead of "Step Over"? Or you could add breakpoints between 234 line to 241 line, after the breakpoint is hit, check the watch window again. How about the result?
    In addition, do you check other debugger window like local or others?
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • HT1414 how can i open my iphone because when i try to restore it from my back up all the files it didn't open anymore & always my iphone have a problem that it automatically shut down then the itunes logo appear then i need it to connect to itunes then re

    how can i open my iphone because when i try to restore it from my back up all the files it didn't open anymore & always my iphone have a problem that it automatically shut down then the itunes logo appear then i need it to connect to itunes then restore to enable to open it..what should i do?i cannot bring it to the smart center because i lost my receipt..is there any chance to recover it?thank you so much..i already update my operating system to ios 6.1.3 but when i recover my  back up the operating system was ios 6.1.2..

    Your phone is in recovery mode. Did you plug it to the computer running itunes? What happend?

  • HT1349 How can i get into my iPad when i forgot my password?

    How can i get into my ipad when i forgot my password?

    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

  • How does another computer show up as "shared" in my file sidebar?

    how does another computer show up as "shared" in my file sidebar?

    If you are seeing someone else's computer in your sidebar it is because they have 'shared' something on their computer and hence made it available to you. If you share something on your computer then your computer would become visible in their sidebar.
    You can access their shared computer without them being able to access yours. They do not have to do anything on your computer to make theirs available to you. All they have to do is tell you what username and password to use to access their computer.

  • How can i open my iphone 4s when i have forgotten my passcode ? without deleting everything on it

    how can i open my iphone 4s when i have forgotten my passcode ? without deleting everything on it

    Put it in recovery mode to restore, you'll get the option to reset the passcode during this process.
    iOS: Wrong passcode results in red disabled screenand iOS: Recovery mode
    If you have previously synced your device with iTunes
    You may be able to reset the passcode by restoring the device.
    Connect the device to the computer with which you normally sync and open iTunes.
    Note: If iTunes prompts you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes", below.
    Right-click the device in the left column and select Back up.
    When the backup is complete, select Restore.
    When finished, restore from your most recent backup.
    If you are using Find My iPhone, you can use Remote Wipe to restore your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode.
    Message was edited by: Ingo2711

  • TS3992 How can I back up an iphone when I haven't set the phone up for back ups & the touch screen doesn't work? The phone can receive calls (not answer) & the pictures & messages can be seen but touch screen doesn't work to unlock the phone or select any

    How can I back up an iphone when I haven't set the phone up for back ups & the touch screen doesn't work? The phone can receive calls (not answer) & the pictures & messages can be seen but the touch screen doesn't work to unlock the phone or select anything. We want to save/transfer pictures, contacts, and music to the replacement phone.

    Try backing it up to your computer with iTunes.  Connect it to your computer, open iTunes, click on the name of the phone in iTunes, go to the Summary tab of your iTunes sync settings and click Back Up Now.  Also go to File>Devices>Transfer Purchases to transfer you apps and other purchased media to your iTunes library.

  • How can I unlock my ipad 4 when I do not know the password

    How can I unlock my ipad 4 when I do not kow the password

    Recovery Mode:
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times to recover your iPad

  • HT203200 How can i solve the -50 error when downloading video from itunes??

    How can I solve the -50 error when downloading video from itunes.   The apple support people cannot even figure it out!??

    The 2330 error often means some sort of damage to the filing system as might happen if the battery fell out while the disk was in use.
    Try running a disk check to see if it finds and fixes any errors.
    http://support.microsoft.com/?kbid=315265

  • How can i hide my extension number when i make outgoing calls

    Hi All,
    How can i hide my extension number when i make outgoing calls,what configuration should i make on the call manager server.
    Regards,
    Lester

    We use a Route Pattern that mimics the telco feature *67. The RP is *679.xxxxxxx with a Transformation mask of 000000000 (just to get beyond the individual blocking on some private lines.

  • How can I delete my Icloud account when I don't know the password and no longer have the email address associated with it?

    How can I delete my Icloud account when I don't know the password and no longer have the email address associated with it?
    You need your password to delete it and I need the email address to reset the password.  I feel like I'm going in circles!!!  Please help!!!

    Go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address (you shouldn't need to verify the old account).  You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • How can I create accurate decimal dimensions when creating a new document or using the art board in Illustrator CS6? When I type in a number with a decimal, it automatically rounds the number up.

    How can I create accurate decimal dimensions when creating a new document or using the art board in Illustrator CS6? When I type in a number with a decimal, it automatically rounds the number up.

    For my part you are welcome, sdowers.
    Unfortunately, the uncertainty arising from the rounding has been up several times here in this forum.
    I just came to remember a warning that needs to be given:
    The rounding of the representation of a numerical value may be harmless in itself, but if you use it for any operation that changes the value, such as multiplication or whatever, things will go wrong because the operation will be made on the basis of the rounded value instead of the true value. So, as in your first case in post #2, 39.625 rounded to 39.63 will become 79.26 instead of 79.25.

Maybe you are looking for

  • Changing ID3 tags in iTunes with Automator

    I have a huge load of music, which are all named "Artist - Track". I want to edit out the Artist from the track name, and fill it in in the Artist tag with an Automator script. I have a program that does this in Finder, but can't find anything to do

  • Populate Flex Grids during view state?

    Hi, I am very new to Flex. I am working on a Flex project where I want to populate xml data in the two grids during viewstate. In my project, I have two grid which resides in the two discinct view state named as "Category" and "Topic". For these two

  • How to get the node id of the content shown from campaign

    Hi Can any one please tell how to get the node id of the content shown by the campaign in jsp Thanks

  • Pixel Bender Toolkit request

    Obviously the PBT allows you to create really powerful shaders and filters for output to Pixel Bender. However, to less technical users, creating such filters would be nearly impossible, given the complexity of the scripting language. Renderman used

  • Setting Default applications for file types

    I recently got NeoOffice for my mac and im trying to set file types to open automatically instead of CTRL clicking then open with then the program. Ive had trouble with that to recieving wrong types of files from people on aim and then having to open