How can my iPhone 5 can be unlocked since i just now got it 2days before from vodafone contract?

i have got a brand new iphone  5 from a contract with vodafone , just 2 days old . i would like to know how to unlock it to all networks , i.e factory unlocked mobile. i want to do this unlcoking soon like in 3days or so , not waiting for long time like 30 days or 90days , etc .please help me and thank you .

It is in the terms of service and the warranty documentation. 
This is from the manufacturers standard warranty (Not applecare)
This is from the Battery replacement program page:

Similar Messages

  • How can I unlock my UK phone for AUS use when sourced from UK Apple Store (so without service provider to do it for me)?

    So my Aus iPhone that I had unlocked to do a bit of travelling went for a swim in the Med- my service provider back home informed me that in order to claim on insurance internationally that I should get a new one from an Apple Store and send them the bill etc etc. I did that, and all was fine with the rest of my trip on a prepaid UK sim.  Now I am home and want to put my AUS sim in (where I am under postpaid contract) but my iPhone is not recognising it, with an error message of 'Invalid Sim'.  My service provider cannot help as the product was sourced from Apple originally and not them. Can someone let me know how this can be fixed?

    Okay, so if you purchased your iPhone from an Apple store in the UK then it is fully unlocked.  Apple in the UK sell fully and officially unlocked iPhones, so you should not have a problem with inserting any sim card into your phone.  The phone will be unlocked as long as you purchased the phone in the UK for the full purchase price and not as sim free rather than unlocked.
    Have a word with your provider, as there could possibly be a problem with your sim card.  Get a new sim card and try that.  There is no reason why this should not work on an unlocked iPhone.

  • When I open my computer I receive the following message: The procedure entry point sqlite3_wal_checkpoint couldnot be located in the dynamic link library SQLite3.dll How can this be corrected?  I never got this message before and I have a iPhone and iPad

    When opening Windows 7 I'm receiving the following message The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.......I have never rec'd this before............I have a iPhone and iPad...............How can this be corrected without interferring with the information on my computer?    Thanks

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Reboot and see if all is well
    In case that your OS is Windows 7 (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Paste file "SQLite3.dll" to the location.
    5. Reboot your computer, it should not display that message, it should be clear.
    Good Luck

  • How can I get FCP to just send the video (without audio) from the viewer?

    Is there a way to select only the video portion of a clip when sending it from the viewer to the timeline? Currently I am taking the whole clip, de-linking the video from audio and then deleting the audio - not exactly the fastest workflow.

    Neil - Thanks for the suggestion but I am a bit more confused now but perhaps I wasn't as clear as I could be either. I am trying to drag clips into the timeline and superimpose them over other clips and I want to be able to drag only the audio or the video from the viewer to the timeline. Is this possible?

  • HT4528 if i forgot my lock password how can i unlock my phone

    If i forgot my lock password on the main screen how can i unlock the phone

    You will need to restore your iPad from the same computer that you most recently synced to.
    Read this: http://support.apple.com/kb/ht1212
    If you can't do the restore then you will need to try recovery mode.
    Read this: http://support.apple.com/kb/ht4097

  • How can I unlock my iphone??? on the screen I only have the apple logo and  a thing that looks like if the phone is working but no advance

    how can I unlock my iphone??? on the screen I only have the apple logo and  a thing that looks like if the phone is working but no advance

    Hi,
    Try a Reset of the Phone... You will Not Lose Any Data...
    Turn the Phone Off...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    The Apple logo will Appear and then Disappear...
    Usually takes about 10 - 15 Seconds...
    Turn the Phone On...
    If that does not help... See Here:
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • How can i unlock my iphone from itunes because i forgot my password

    how can i unlock my iphone when i forgot the password?

    You'll need to restore it. See:
    http://support.apple.com/kb/ht1212
    http://support.apple.com/kb/HT1808
    Regards.

  • How can i unlock my iphone from the us

    how can i unlock my iphone from the us?? please help

    If you are referring to a lock to a specific cell carrier, so you can use the iPhone with a different carrier, only the cell carrier to whom the phone is locked can authorize unlocking. You will need to contact the carrier.
    Regards.

  • I have forgot my Iphone passcode. Itunes will not let me restore it, i do not have icloude,or find my iphone,and the closest itunes store is 4 hours away how can i unlock, or reset my phone?

    I have forgot my Iphone passcode. Itunes will not let me restore it, i do not have icloude,or find my iphone,and the closest itunes store is 4 hours away how can i unlock, or reset my phone?

    Try this:
    Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • HT2305 I have forget my 4 digit passcode for my ipad 3 and exhausted all the attempts, Now the screen shows "ipad is disabled connect to itunes" How can I unlock my ipad now. Also I have not put "Find my iphone" in icloud as well. Please guide me to unloc

    I have forget my 4 digit passcode for my ipad 3 and exhausted all the attempts, Now the screen shows "ipad is disabled connect to itunes" How can I unlock my ipad now. Also I have not put "Find my iphone" in icloud as well. Please guide me to unlock it.

    Also when I am trying to connect ipad to my windows PC, it shows, your software is up to date and later starts restoring while updating again. Then automatically it stops to update halfway and I have to repeat the process again and again, still in vain.

  • My iphone 4 is disabled and asking to connect to itunes..... but i resently restored my laptop by which i deleted itune.. so i dont have any back up. so now how can i unlock my phone without restoring it to factory settings... because i eant all my stuff

    my iphone 4 is disabled and asking to connect to itunes..... but i resently restored my laptop by which i deleted itune.. so i dont have any back up. so now how can i unlock my phone without restoring it to factory settings... because i eant all my stuff

    there should ba a way to undisable it without loosing all of your data

  • How can i unlock my iphone because it says connect to itunes

    how can i unlock my iphone because it says connect to itunes

    It is in Recovery Mode and needs to be restored. See http://support.apple.com/kb/HT1808.

  • My phone was run over. It still works but the screen is smashed and I cannot unlock the phone from find my iphone. How can I unlock the phone so I can save my photos?  It was not backed up in iCloud. I

    My phone was run over. It still works enough to see some of the screen but not the number pad. I cannot unlock the phone because I activated find my iphone. How can I unlock the phone so I can save my photos? Is there a way to unlock it from find my iphone. It was not backed up in iCloud. When I plug it into my computer, the computer tells me that I have to unlock it first. Help?

    No I haven't synced my iPhone with the computer I'm currently using. The computer that I normally sync my iPhone with is being repaired.
    I read a nearly identical question to mine (in which you answered) and I found my the answer. Thanks!
    Now I have a few more questions: If I mail my broken iPhone to Asurion, will I be able to get my data off of my iPhone once Asurion has it? And what will happen to my old iPhone and the data on it if I activate my replacement iPhone? Will my broken iPhone just become de-activated and will the data be erased or lost or something? Could I still sync it (with the computer ir originally synced with) and back up the data?
    Thanks.

  • HT201328 how about if i don't have the iphone with me, how can I unlock it?

    how can i unlock an iphone if i don't have it with me?

    For what reason would you want or need to unlock a device if you do not physically have it with you?

  • How can i unlock my iphone if i forgot my password?

    how can i unlock my iphone if i forgot my password?

    Read here:
    http://support.apple.com/kb/ht1212

Maybe you are looking for

  • SRM 7.0 Catalog (Web Service) Portal Links Not Working

    Hi, Following an upgrade to the latest Service Packs for SRM, we are encountering an issue with dead links to Catalogs (both Internal MDM and External). Prior to the upgrade the normal catalog (webservice) links, as defined in the SPRO (Supplier Rela

  • Setting the font style and color for FileChooser labels

    Hi Friends, I have a certain standard Font style and color set for my application GUI. Now, I want to set the style and color for Swing components like FileChooser. Is it possible ? Also is it possible to localize JOptionPane ? Please advise. Best re

  • Time capsule wireless range is very poor & often weak

    My TC has a very limited distance that it covers. S bad that I have 2 Airport Express for boosters/extenders to have most of my house covered (yes, a small portion of my house is still not covered). Is there something I have missed in settings restri

  • Java.lang.NoClassDefFoundError: javax/xml/rpc/Service

    Hi, I have created client stubs for a webservice using axis wsdl2java tool. When I try calling these stubbed methods from JUnit tests, they are working fine but when I try to execute the jar (it is a swing) I get the following exception: Exception in

  • I cannot quit safari, causing me not to be able to shut down my computer

    I did a software update, afterwards I had to restart my computer, while safari is open the quit option is grey and cannot click, I try quitting from the dock, that option does not work either. Now i cannot restart or quit my computer. Please help.