How can network connectivity can be monitored?

Hi,
You can install Microsofts Network monitor to monitor your network, Also you can get logs if there is any discrepancy in network.
Download :
http://www.microsoft.com/en-us/download/details.aspx?id=4865
KB Article : http://support.microsoft.com/kb/933741/en-us
You can also install Wireshark, to monitor your network
Regards,
Manjunath Sullad

Similar Messages

HT5219 how can I connect two thunderbolt monitors to my macmini in windows 8 and bootcamp? Works fine in OSX

how can I connect two thunderbolt monitors to my macmini in windows 8 and bootcamp? Works fine in OSX

Did you try to hook up both monitors to the Belkin adaptor? Trying will determine if your monitor has a bad input port. See if the Belkin adaptor is the problem. I have never used that specific adaptor, but I have always had luck with the Dr. Bott's DVI for ADC adaptor. Best of luck.
www.drbott.com

Quad+Geforce 7800 GT, can't connect 2 VGA monitors

DVI connectors, on the card, are too close to fit two DVI to VGA adaptor cables.
Apple supplies a DVI extender that is a little thinner but the female do not match the DVI to VGA plug.
On the male DVI to VGA adapter there are 4 pins more not present in the DVI adapter, so that connection it's not allowed. What's goin on?
Apple tech help. How can we connect 2 VGA monitors?
eri

Eraldo - I had the same problem as you. Apple even sent me a new DVI-DVI extender cable but that one also had the small slotted pin receptacle that was too small for any of my DVI-VGA adapters. We finally found one that the extender DID fit, and that was the DVI connector that connects to my main display, a 20" Cinema. So the solution was to use the extender cable on my Cinema cable (on port 1) and use the other DVI-VGA or whatever connectors on port #2, straight into the Mac without the extension.

How, using Adobe Connect can increase the number of participants in the meeting? I need more than 25 people.

Hi, I use licensed Adobe Connect. Earlier in the meeting could involve up to 100 people. Now only 25. How, using Adobe Connect can increase the number of participants in the meeting? I need more than 25 people.
Thanks for your help.

The purchasing option through adobe.com only allows up to 25 attendees. If you need more than that, you will need to purchase through a reseller. You can find one that is able to sell in your part of the world, here: Adobe Connect Partners. Just reach out to one of the Global Partners.

How many Voice connections can cisco 2821 support?

Good day.
I have a cisco 2821 with EVM slot, NME-X slot and two HWIC slots. I have 4 port FXOs on the two HWIC slots. The EM-HDA-8FXS module on the EVM slot can handle 8 FXS connections. Please i would like to know if there is an EVM module that can do FXO connections and also how many voice connections can this router handle in total. Can the EM-HDA-8FXS module handle both FXS and FXO connections?
Hope someone can help me out. My deadline has already passed.
Regards,
Obinna.

Hi, already replied to this in the appropriate forum.
Please do not open duplicate threads.

How do i connect three external monitors to a macbook pro?

How do I connect three extrenal monitors to my Macbook Pro?

I have a USB to DVI adapter from kensington. I use to use it to power at 14" display.Moving windows around had some tearing and lag. Typing lagged, but it was use-able. It was fine for displaying diffrent stats. The OS treated it as it would any additional display.
But I found it undesirable for any thing tha requires lots dragging and clicking.
Every so often the device would lock up. At witch point the computer would get stuck trying to detect the USB display. I would have to unplug the adapter, cycle the power on the adapter. And then it would be good for a couple more months.
Also some times after a reboot, the adapter would stop working. I would have to unplug it, and login, and then plug it back in.
Coping file to my USB 2 harddrive seemed to cause more lag to the USB to Video Adapter.
About the idea of dasiy chaining 3 Thunderbolt display tgeother. Apple Thunderbolt Display (27-inch): Connection options for Thunderbolt Macs states the most the current MacBook Pro 15 & 17 inch can currently drive is 2 Apple Thunderbolt Displays.

Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. Thanks.

Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. I am getting lots of spelling errors as the MacBook laptop screen is too small. Thank you so much! .

Contentmom6 wrote:
Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work.
Normally, you just connect the monitor to the MacBook using a VGA adaptor that you can buy from an Apple Store. Now try System Preferences > Displays > Detect Displays. You should now be able to select a display mode for the monitor. If it still doesn't work, then I'd check that everything is properly connected. I've had problems with colours disappearing due to a faulty connection in the VGA adaptor.
Bob

Hp dv6 1355dx laptop - how do I connect 2 external monitors?

I have a HP dv6 1355dx laptop Entertainment PC. How do I connect 2 external monitors (both have VGA cables) and neither one has HDMI connectors. My laptop has only 1 VGA connector, so I can display my laptop video and 1 of the external monitors.
Any help would get greatly appreciated. I am even willing to buy a docking station or port replicator.

Hi,
Docking station or port replicator won't solve the problem because of your internal graphics card. You need something which is similar to the following products:
http://www.matrox.com/graphics/en/products/gxm/
or USB to 2 VGA monitors but very hard to find (normally you can only get 1 VGA and 1 other, not both VGA's).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do I connect an external monitor to my MacBook Air?

How do I connect an external monitor to my MacBook Air?

With a minidisplay port to VGA or DVI or HDMI adapter:
http://store.apple.com/us/product/MB570Z/B/mini-displayport-to-dvi-adapter?fnode =53

How do i connect a dell monitor u2715h to my macbook pro late 2013?

How do I connect a Dell monitor U2715H to my MacBook Pro. The only drivers provided are for Windows.

THanks, James. My daughter suggested I just plug in my new monitor since Macs often don't need as much driver support as Windows machines. Sure enough, that's all I had to do.

Can't Connect, can't complete the call. Check your...

Greetings guys,
My phone was PERFECT until I updated to Lumia Black, since then I get the error:
Can't Connect
Can't complete the call. Check your cellular signal and the number, and try again.
at random times; this is specially bad when driving and wanting to make a quick call via voice command; it's just not possible.
This is the list of things I've done to try and fix it without luck.
Resetted the phone
Upgraded to pre-8.1 alpha
Upgraded to 8.1 alpha
I can also confirm that when trying to call via voice with Cortana (and until I toggle flight Airplane mode) it gives me the same error message.
I want to add that I am not the only one, I've heard from two lumia 920 users and one lumia 820 issue and have the screenshots they sent me in case it's of any help (i've attached mine - obscured)...
Does anyone have any recommendations or ideas?
Thanks tons,
Geo
Solved!
Go to Solution.
Attachments:
wp_ss_20140503_0001.jpg ‏76 KB

Sadly i stilll have the issue. As you mentioned gtejeda, it is way better now, but is still there speccially when you more need a quick call. I have updated my phone to the latest release, but still hoping poeple to see this and realize that it is not 100%. They are on the right track, but need to keep working on it.
Attachments:
wp_ss_20140609_0001.png ‏131 KB

HT3131 how can i connect 2 external monitors(VGA) to my 2007 macbook pro

I would like to use 2 external monitors simultaneously with my clamshell closed. I have external keyboard and mouse but need to know how to and what to buy in order to achieve this.....havent found anything straight forward on apple site, like a vga dual monitor splitter, so am in need of some advice on how to do this please!

Thanks for the reply. Haven't gotten anything as yet. Just that I burned out my older PowerBook using it as a primary screen w/ a secondary 20" monitor. Would be nice if the MacBooks could be used as a CPU only, connect 2 different monitors, and use the LCD screen when portability is needed. But I suppose that is why Apple makes different types of computers. I know I can rig the video SCSI cable to bypass to LCD screen and use the other built-in monitor. But there goes the warentee and any kind of AppleCare... not that I have ever used it, (until a day after it has expired!)
But thanks for the feedback. Your reply is what I expected. Being that I am a mercenary graphic designer and need to be able to work whenever, and where-ever I need to, the MacPro is not my hardware of choice. As well, I don't have $4000 in my budget. But man do those machines rock! Just think of what NASA could have done with one of those in 1969 when we were going to the moon! But now that the U.S. has decided that manned space travel and even scientific space exploration is not worthy of having a budget, the MacPros are religated to creating new episodes of Jersey Shores!
Thanks again for your feedback!

Can't connect to external monitor (possibly after Yosemite update)

I have recently updated my macbook pro to Yosemite. My external monitor (samsung 1080p tv) would connect fine using a hdmi before, but now its unresponsive. I have been into adobe premiere pro CC and been onto preferences > playback > then ticked my monitor but still no luck. I can't remember using the monitor since updating to Yosemite until now so im guessing this is what is the problem as was fine on mavericks. Any ideas? Thanks

Basically I have the same issue. I also suspected a software update (though I am using Mavericks). However, it does play with an older version of Adobe Premiere (CS 6). So I suspect that one of the manny updates to CC broke the connection. It's an important part of my workflow, so let me know if you find out anything. I don't have a solution right now.
Here was my complete post if it helps:
Premiere CC not showing video to monitor
CB

HT5219 Can I connect my thunderbolt monitor to my MacBook Pro and iMac at the same time

I am wanting to connect my thunderbolt monitor to my MacBook Pro as a secondary monitor when running programs in windows 7 thru boot camp, and also have it connected to my iMac as a secondary monitor when working thru apps on my iMac. Is there a way to do this without having to connect and disconnect cables each time I want to switch.

I don't think it can be done without a KVM switch, & not sure they can handle that resolution.

How many concurrent connections can ACS handle at once?

Hi Experts,
Could you please let me know how many concurrent connections ACS can handle at once?
Is there any limitation on it?
Our ACS version is 4.0 (1) build 27.
Thanks in advance for your help and have a nice day!
Regards,
Gabor

It depends on many other factors but as far as I know ACS can handle upto 40 Auth request per second*
*Condition Apply
Regards,
~JG
Do rate helpful posts

How can network connectivity can be monitored?

Similar Messages

Maybe you are looking for