How can one change the channel of a screen control within Mainstage?
The issue that I'm having is that some 3rd party apps (Dimension Pro in particular) seem to receive Sustain (64) messages on only Midi Channel 1
I'm using a multi zone controller, with sounds set in MainStage to respond to different channels. I've got it all working well except . . Dimension Pro won't "see" a controller message if it's sent from any channel other than channel 1.
I was even having the same problem with certain sounds in Kontakt.
So the question is . . how can one shift the channel of these messages over to channel 1?
Better question, how can I get Dimension Pro to respond to a controller on a channel other than 1, but I suspect this is not the forum for such questions!
Thanks in advance,
Mark
MacOS 10.7.3
MainStage 2.1.3
Axiom 61 (2nd gen) keyboard controller
You may be able to achieve the desired results by a different method. I have an Axiom, but I don't assign zones in it. I just send one zone to Mainstage and handle it all there. You can layer and or split a practically unlimited number of instruments and assign screen controls easily. You probably want to set up all screen controls at the concert level in layout mode. You can later override concert mapping in individaul patches if you want. For instance, you could use an expression pedal for volume(7) on one patch and for modulation(1) on another patch. You can send that control to one instument channel strip or you can choose to send to all. To do this, select a screen control in edit mode. In the screen control inspector, check the overide concert mapping box. You will then see two additional tabs-mappings and unmapped. Select the mappings tab. In the mapping list, double-click "Unmapped". You can the map the screen control to any single instrument channel strip in this list or send to all. Select one and then choose a mapping destination. If you want to map expression to one instrument and not others there's another way. Select an instrument channel strip, then selct MIDI input in the software channel strip inspector. Check the filter expression box. This instument will now not respond to expression, but the other intruments in this patch will. You can filter some other events on this page. The layer editor tab allows you full control ol splits and layering options of all your instruments in this patch. Hope this helps.
Similar Messages
-
How can one change the color of JToolTip background
how can one change the color of JToolTip background from Purple to user defined ? I am using setToolTipText() method to set the text required but here the background color of the ToolTip is Purple and i wish to change it to white.. how can i do it ?
i tried to change the color by defining a seperate class JToolTip but i don't know how to set it with a JButton..
can someone help..
thanks in advance ..
avinashHow can I change the text size and font?Give a man a fish.... Check out UIManager.
-
How can I change the scroll rate of a control
I need the control to scroll at a faster rate than what Labview provides.
How can I change this to make the control (with up/down arrows) scroll faster without holding the shift key down and while maintianing the same increment step size.If you really want to go above and beyond what LabVIEW gives you, you'll probably have to program it yourself. The best way to implement custom functionality for your controls is by using Event Structures. You could, for instance, hide the regular Increment/Decrement arrows for your control and replace them with custom controls that look the same. Then register for Mouse Down events and increment the control value as fast as you want in that event case. The only difficulty comes in when you need to have multiple such controls, or if you want to package them from one app to another.
If you want a completely self-contained function that does it all and doesn't require specific block diagram implementation, you probably want XControls. XControls allow you not only to change a control's appearance but also its functionality. The end result would be a reusable control that would look and behave however you want, but wouldn't require any block diagram code from the target application. XControls, I would warn you, can be a bit advanced. Your first is the hardest. After that it sinks in
XControls are available for LabVIEW 8 Professional Development System and higher.
Jarrod S.
National Instruments -
How can one change the order of the issues (folios) in a custom viewer?
Hi,
I am trying to find how one can determine the order that the issues (folios) will appear in a custom viewer (multi-folio with subscriptions).
I tried to rearrange the order by changing the publication date in the Folio Producer Oorganizer, but it has no effect in the iPad custom viewer.
ThanksThe publication date settings determine the order of the folios in the library, so that should work. Did you update the folios?
-
How can one change the Preferences path?
Hello,
I've recently discovered the Preferences API and try to learn how to use it but I'm stuck on a problem right now: Is the only place to store my keys/values inside the "JavaSoft/prefs" node?
I have this piece of code so far:
* The method used to store preference If no package is specified, the
* current class' package will be used
* @throws NullPointerException
* If key or value is null.
* @throws IllegalArgumentException
* If key.length() exceeds MAX_KEY_LENGTH or if value.length
* exceeds MAX_VALUE_LENGTH.
* @throws IllegalStateException
* If this node (or an ancestor) has been removed with the
* removeNode() method.
* @throws BackingStoreException
* If this operation cannot be completed due to a failure in
* the backing store, or inability to communicate with it.
public void storePreference() throws IllegalArgumentException, NullPointerException, IllegalStateException,
BackingStoreException
// The node which will be used is the user specified one
Preferences prefs = Preferences.userRoot().node(this.tree);
//We add the listener here so that it is instantiated with the constructor
prefs.addNodeChangeListener(this);
prefs.addPreferenceChangeListener(this);
prefs.put(this.keyName, this.keyValue);
// Make sure the change is commit
prefs.flush();
}Where tree is the path (absolute) where to write data.
The problem is, whatever the way I approach the thing, I always end in something like:
|---+JavaSoft
| |---+Prefs
| |---MyNode: MyKeys / MyValues
When I would like something like
|---+JavaSoft
| |---+Prefs
|
|---+MyApplicationName
| |---+UserSettings
| | |---Edvard: MyKeys / MyValues
Hope I've been clear enough.
Thanks in advance for helping.
Edited by: airchtit on Jan 31, 2008 6:50 AMWhile you can't specify arbitary sub-trees and especially not a specific position in the Registry (as the previous posters noted), you should not use userRoot() to store your preferences, but rather use "userNodeForPackage(SomeClassFromYourApplication.class)".
This way it will be ensured that your preferences nodes will not clash with those of other applications. -
How can I change the default apple ID for app store. I bought the macbook from my school when I left and I'm the ID in place of mine is the computer departments one. How can i change it to mine?? Thanks
http://support.apple.com/kb/ht5621
-
When my husband and I first bought our iPhones, I was the only one with an Apple ID (since he never used iTunes). He used my apple id to get apps. Now he has his own ID, but my apple ID email address keeps popping up on his phone when he tries to download an app. We do not want to have all of the same apps on our phones. How can we change the ID on his phone? I already tried going to Settings>iTunes &App Store> and changing the Apple ID to his account email and that did not solve the problem. To make things worse, I recently changed my Apple ID email address (without getting a new ID) and I do not remember my old password (and this is the address that is popping up on his phone). He does not have any music on his phone and all of the Apps that he has are free. Any help you could offer would be great (-:
All apps are forever tied to the Apple ID that bought them. To stop your id from popping up, you need to delete the apps on his phone, and then repurchase them under his account.
-
2 different iphones have the same Apple ID, how can I change the apple ID on one of them but not delete the other iphone's data and media?
You don't have to do anything with the first iPod that you don't use anymore. If you are planning on keeping it, put in a drawer in your house and forget about it.
You don't need a second account to use with the new iPod. I use one Appl e ID and iTunes library for two iPods, and two iPad. I have different content on all four devices. You can select exactly what you want to sync to each device and it can be different content on all devices. -
I forgot my password along with the answers to my security questions. So I try sending an E-Mail to myself but the E-Mail I am sending it to isn't even mine, nor the one I have registered. How can I change the E-Mail or something?
Security questions:
https://discussions.apple.com/thread/4533485?tstart=0 -
How can I change the itunes store from Swiss to the Italian one on my ipad2 with new software ios6? Thanks
See More Like This to the right of this post!
-
How can I change the setting to one appropriate to java1.2
Hello.
I am using WebLogic 4.5.1 .
and recently started to use JDK 1.2 instead of JDK 1.1.7.
So, I set [start]-[weblogic]-[Choose1.2JRE] in environment.
and then, if I execute T3Server, the message of
"javai.dll class path cannot be found " is displayed and the server is not
loaded.
However, javai.dll was in java1.1.X\bin.
I can assume that a setting is to java1.1.X.
--> How can I change the setting to one appropriate to java 1.2
It's my environment
ClassPath
.;c:\weblogic\classes;C:\weblogic\lib\weblogicaux.jar;C:\weblogic\license;c:
\weblogic;C:\weblogic\myserver\clientclasses;C:\weblogic\myserver\serverclas
ses;C:\weblogic\myserver\servletclasses;C:\weblogic\mssqlserver4\classes;c:\
weblogic\classes\boot;C:\weblogic\eval\cloudscape\lib\cloudscape.jar;c:\rmi-
iiop\lib\iioprt11.jar;c:\rmi-iiop\lib\iioprt.jar;c:\rmi-iiop\lib\rmiorb.jar;
C:\jsdk2.1\runner.jar;C:\jsdk2.1\servlet.jar
Path :
%SystemRoot%\system32;C:\jdk1.3bin;c:\weblogic;c:\weblogic\bin;
c:\;c:\bat;c:\util\;C:\jsdk2.0\bin
Hyung Gi Min -
Hi! How can I change the shipping address for the program of replacement of the 1 generation ipod nano? I've already received the empty box and now I should send back the old ipod but I'd like to receive the new one to another address. Thank you.
I would contact Apple directly and have them work with to get the iPod shipped to a new/different address.
http://www.apple.com/contact/
B-rock -
How can I change the space between a checkbox and text all at one time? I have a lot of checkboxes in my form.
Okay, I haven't found a way to add an extra space using Find/replace, but you might be able to add some text wrap to the check boxes that will push the text away from them.
Open Find/Replace and click the Object tab.
Click the Specify attributes to find button to the right of the Find Object Format: field.
Under Basic Attributes, choose Stroke and then the Black swatch (assuming the black swatch is applied to the strokes of your check boxes). If there are no other stand-alone objects in your form with a Black stroke, this should be all you need. (If there are Black strokes on your table cells, they will be ignored.)
Click OK
Click the Specify attributes to change button to the right of the Change Object Format: field.
Under Basic Attributes, choose Text Wrap & Other > Text Wrap > Type: > Wrap around bounding box (2nd button from left)
Under Offset, set a Right offset at the distance you'd like to add (I don't know what units you use, but the 3-5 points might work for your purposes...might take some trial-and-error to get it where you want)
Click OK
Click Change All -
How can I change the gain on one audio track in the selection?
How can I change the gain on one audio track in the selection? Is there a way to adjust the gain as it is implemented for example in cubase - pull waveform up and gain varies?
I'm not sure what you mean by "in the selection", or, more honest: I don't understand that at all.
So, instead I'm going to tell you that you can indeed adjust the Gain of one or more selected region(s) in the Region inspector on the left hand side. -
How can i change the data from one Time Capsule to another?
How can i change the data from one Time Capsule to another?
Do you mean copy it? If so, see #18 in Time Machine - Frequently Asked Questions You'll need section 2 there.
If you mean something else, please clarify.
Maybe you are looking for
-
Hi, I got good info on Profit center and Doc splitting from the forum archives. I have a doubt : If doc splitting with Zero balancing is activated the system takes care to get the BS and PL at profit center. 1. Is it necessary to clear the balances i
-
Adobe Flash Player for MacG5 (10.5.8)
Where can I find Adobe Flash Player software to install on a MacG5 (10.5.8) PC Processor? (I was told by a rep that I could purchase CS5.5 with my OS version, and of course, it doesn't work. They didn't mention the "processor" requirements!)
-
Converting Final Cut Pro to Express
I had someone do a project for me using Final Cut Pro. Can I take that file and open it in Final Cut Express and do some of my own editing?
-
Hi, I have a link from my web service to a Form IView which is just a blank form with a "Plain Text" Control on it. I want to put a Guard condition on the link, but it's grayed out. Can anyone tell me why?
-
Design overview: List A InfoPath Library - Form A SharePoint Designer workflow List A has a multi-selection column with multi-values. Form A has fields populated from the data in List A by using a data connection in the form. I have a workflow that