How can one get java to work with SnowLeopard and FF13
SInce the install of the most recent Java update (9) for SnowLeopard (10.6.8) Firefox 13 simply advises that there is no plugin installed. The behavior the update indicates will take place (where the web page provides the option to enable the plugin) simply has never presented itself. At this point, java is simply no longer available on a Mac running SNowLeopard and using Firefox. Is there a solution to this other than upgrading to Lion?
Yes. However, do note that FF is only on the machine for testing, I don't use it, preferring Safari. Any further issues with FF are best answered at http://support.mozilla.org/
Similar Messages
-
Email messages from my icloud account update on all my devices showing if they have been read and if a reply has been sent. This does not happen with my tinyworld (TalkTalk) email account. Can I (how can I) get this to work with TinyWorld?
You have to look at the email protocol being used. the Apple email system uses IMAP, does Tinyworld use IMAP or POP?
Does the email system permit delivery receipts to be requested?
Just some of the things one needs to determine from the information provided by the email service provider. -
My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?
1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host> -
How can i get acrobat to work with windows vista
How can I get adobeexportpdf to work with windows vista?
But if, on the other hand you do mean Acrobat, please let us know what problem you are having.
-
How can I get Lion to work with label printer- Brother QL 570 or Dymo 450 Turbo?
I can't get Lion to work with label printers, either Brother QL 570 or Dymo Turbo 450. I want to uninstall Lion and use Snow Leopard unless there is a way to make Lion work with these devices. Any ideas?
Dymo has released new drivers since Lion came out. Have you downloaded and
installed them from the Dymo website?
Some people have said that their Dymo label printers were set to off line by Lion, but
worked fine after going to Print & Scan, selecting the Dymo printer, and making sure
it was active/on-line. I had to do that with my Dymo 450 Label Writer.
I cannot offer any tips about Brother, but you may wish to check their website
for latest drivers. -
Turnitin will not work with firefox 4 how can I return to firefox 3 or how can I get firefox 4 and Turnitin in sync
The Turnitin system requirements on mention Firefox 3. If it does not support Firefox 4 you can downgrade to Firefox 3.6
To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles -
Game through the apple store has now frozen on my ipad. How do I get it to work again?
Hi there,
You may want to take a look at the troubleshooting steps found in the article below.
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/TS1702
-Griff W. -
How can I get Recipefox to work with the latest version (16) of Firefox?
Recipefox worked on previous versions of Firefox. I could use the Grab It feature on many sites & easily retrieve recipes. Now, with the latest version of Firefox, it does not work on any of the recipe websites. Is there a more recent version of Recipefox that works with Firefox version 16, I am using 0.68. Does Recipefox get updated with newer versions of Firefox.
Hi,
You can try to right-click and '''Find Updates''' via '''Tools''' ('''Alt''' + '''T''') > '''Add-ons''' > '''Extensions'''. You can also '''Remove''' it, and search and install via the Search box on the top right or from [https://addons.mozilla.org/en-US/ AMO].
[https://support.mozilla.org/en-US/kb/Using%20extensions%20with%20Firefox Using Extensions]
If problems persist you can reset Firefox and start afresh with [https://addons.mozilla.org/en-US/firefox/addon/recipefox/?src=search recipefox].
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us! -
How can I get MagicTrackpad to work with Boot Camp and Windows Vista?
Just installed Lion and then installed Magic Trackpad. Now I need to know how to get the Magic Tackpad to work with Windows Vista in my Boot Camp partition. Windows Bluetooth recognizes the Magic Trackpad but it says the device won't confirm the passkey. No passkey came with the Magic Trackpad and the option to not use a passkey still doesn't achieve connection with Windows. Suggestions/ comments, please.
TIA,
PicmanUPDATE
Just completed several lengthy sessions with Apple Tech Support (escalated to excellent Sr. Advisor). Bottom line is that there seems to be no answer to the problem of the Magic Trackpad not being able to maintain its pairing/connection with Windows (Vista in my case) or OS X (10.7 in my case) when switching Boot Camp partitions. In fact, when trying to re-pair it is necessary to remove the MTP batteries first. To pair at all with Windows requires the use of the Bluetooth passkey "0000" (not provided in MTP documentation). This achieves limited MTP/Windows functionality (cursor and "click" control only - with BC 3.1. BC 3.2 is supposed to provide more gestures, but I have not gotten there yet). Appears that when switching back to OS X, that passkey has remained with the MTP and is not what OS X is looking for, so it fails the connection. Removing/replacing the batteries probably dumps the passkey and allows the OS X connection. The Sr. Advisor says he sees this issue often (including with Windows 7) in their internal chat rooms, but no solution. He will be referring it to the engineers and will let me know the outcome. Meantime, assuming I keep the MTP, I'll have to resign myself to using a wired mouse when going to Windows (not a huge inconvenience, since it's only for Quicken; but the issue is worse than "in-elegant" for Apple!
I am satisfied that I have obtained the best possible help from Apple on this issue. If anybody has more, please reply.
Thanks,
picman -
How can I get dashlane to work with firefox
i have added the extension but can not get a response from dashlane.
I don't use Dashlane myself... Does their support article help?
http://support.dashlane.com/customer/portal/articles/390903-how-to-verify-the-firefox-extension -
How can I get Airplay to work with my 3TB Time Capsule and my two AV receivers
I have researched the net to death and my only solace is I don't appear to be alone. I have a 3TB Time Capsule that has a Denon and Pioneer receiver attached to it by ethernet. Also connected to the time capsule our three apple TV's. I can use airplay with my iPhones and iPads to the Apple TV but can't get either the Denon or the Pioneer to show up as Air Play options on any IOS Devices or my two Mac's.
I have the latest firmware on the Denon and Pioneer, the latest firmware on the Time Capsule and Mac's. I have tried power cycling, inserting a switch between the receivers and the time capsule but to no avail.
Any suggestions would be greatlyYou can't officially as it relies on hardware.
A potential software solution is Airparrot.
http://airparrot.com
AC -
How can i get javascript to work with version 18 - all boxes ticked but still problem
I have WINDOWS 8 (for 2 weeks) , Firefox v18. I try to use a banking site that demands javascript but when I try to use the site, I get "javascript not working (or available).
If I go into Youtube , any video I pick fails to run - instead I get flashing video screen
I have set Javascript enabled but no difference.
can anyone point me in right direction .
I have reloaded Firefox and reset it - problem still existshello, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] -
Can't get 4.1 working with ALSA and Intel card
Hello everybody,
My problem is simple, but I cannot find any solution for it.
I have Arch Linux 64 bits installed with ALSA and a Intel onboard sound card
I can get the audio working simply installing ALSA and unmutting the channels, but I get no sound at the rear speakers and the center speaker (subwoofer).
I run:
$ spearker-test -c 5
And all I have is sound at the 2 front speakers.
Looking at alsamixer I only saw configuration for 2,4 and 6 channels. I am currently using the configuration for 4 channels.
I unmuted everything in alsamixer (playback) and nothing changed.
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
$ lsmod | grep '^snd' | column -t
snd_hda_codec_hdmi 23704 1
snd_hda_codec_realtek 59331 1
snd_hda_intel 25700 7
snd_hda_codec 97464 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 6300 1 snd_hda_codec
snd_pcm 74926 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
snd_timer 18966 1 snd_pcm
snd 60021 21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
Anyone knows how to make it work? Thanks!Thanks for the answer, tried this command, here is the output:
$ speaker-test -t wav -c 5 -D surround41
speaker-test 1.0.26
Playback device is surround41
Stream parameters are 48000Hz, S16_LE, 5 channels
WAV file(s)
Broken configuration for playback: no configurations available: Invalid argument
Setting of hwparams failed: Invalid argument
Is there something needed to make this command run correctly? -
How can I get paypal to work with itunes?
I am having a problem with Paypal in general. I was thrilled when I saw that Paypal was a choice. So, I choose it for a payment option, verified all information and set up my preapproved payment account. For awhile everything was great. I bought music and podcasts with no problem. Then after trying to buy a song one day I was given a message that my account information has changed. I updated all my information (which I never changed in the first place) and that's when the problems started. I verifed all information with Paypal as well but when I click "Return to Merchant", I am directed to the apple website's itunes download page. I have already downloaded the latest version of itunes thinking MAYBE I needed to update. But still, no verification on the side of itunes that my account is active. Everytime I try to buy a song I am directed back to the page in itunes that I need to verify my paypal account. My account is active in paypal, but still I can't buy songs. I have verified my account information, I don't know how many times now in the past few days. I have emailed Apple support with my problem and have heard nothing back from them. I have been doing searches in discussions and have seen that paypal may not be the best choice for payment per so many problems customers are having. I feel I have no choice but to switch to a credit card if I want to buy anything in itunes. I think that if you offer a choice like paypal then it should be crediable. Apple really needs to take this choice away or fix it, and stop misleading customers into problems like this. It is really fustrating.
Oh yeah, once I actually got into my account information and re-entered all my info (once again!?) and then I am given an error message "Form not complete....enter country". This confuses me to NO END. My country (USA) is clearly stated in the form. I mean, you have no way to change it, it's already there! ?*&#@! So, I click "Done" but itunes will not accept it. I get the same "enter country" error over and over. I have changed browsers(from IE to Mozilla and back again) and tried countless advice I have found while searching in Discussions to no avail. I have updated my information until my fingers are sore. I have verified my paypal account so many time that my email is full of confirmations from Paypal. I cannot understand why this is happening or how to fix it. Any advice would be appreciated.
Thanks!1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host> -
How can I get CUDA to Work with a GTX560 Ti in CC 2014
One of my editing computers uses a GTX560 Ti card. In previous version of Premiere I was able to edit the "cuda_supported_cards.txt" file and my GTX560 Ti to the list. I then noticed a boost to render times and overall performance. With the latest version of Premiere Pro, the "cuda_supported_cards.txt" file isn't there anymore and Premiere tells me I am unable to use hardware acceleration with the Mercury Playback Engine. Is there a way with the latest version of Premiere CC to get my card to be recognized again?
Thanks.I had updated my video card driver fairly recently and I use the GeForce Experience to keep up-to-date, but when I looked I didn't have the latest driver. After installing it, the GPU acceleration is now working. Thanks!
Maybe you are looking for
-
Problem calling in other methods.....
Hi I am trying to write a program that will allow a user to input 3 integers (3 sides of a triangle). These are taken as arguments and then a method i have written will calculate and print out the area back to the user. I have spent a while typing th
-
I have a problem with IOS 5 with my iPad.
In the MUSIC aplication all lyrics are missing from the song I had on. They go on iphone but not in ipad.
-
How to change database in CR XI Release 2?
I'm using CR 11 Release 2 I created a report pointing to a SQL stored procedure in our 'development' database (called development). I now want to change the report to point to the identically named stored procedure in our 'Production' database. I t
-
How to configuration web service in bw that I can open query in explore ?
Hi Can anyone tell me how to configuration web service that when I click " luanch in web browser "in BEX Anaylzer , Display Query on the web in BEx query Designer open rsplan modeling on web ,what parameter will be configuration ,give me step to st
-
Extension Builder does not reload extension in Safari
I am running Yosemite 10.10.1 with Safari 8.0.2 I am trying to make a simple extension (a "Hello World" example at this point). It works, but once I change the settings held within the Info.plist file I need to restart Safari in order for it to refre