How can one place a single image on a spread? CS3-MAC

Hi all,
i How can one place a single image on a spread? CS3-MAC
A very straight forward question I think. I just never did it before. Anyone knows of a fast technique of doing this? I have to make 70+ images this way. Could it be scripted?
thanx in advance
Michael

You'll need to be more specific. Placing a single image on one spread is drop-dead simple. File > Place, choose file, click (or click-and-drag) to place, scale and position as desired. You can ask about scripting in the
scripting forum.
You might not need to script this to get efficient use of time. Make a picture frame on the master spread and then insert 140 pages (70 2-page spreads) based on that master. File > Place, and select all 70 files. (They need to be in one folder. Click on the top file, scroll down, lick on the bottom file.) Zoom out and click once on each spread to place each image. Should work faster that writing, testing, debugging, and running a script.

Similar Messages

How can I restore a single image from an aperture time machine backup, do I have to restore the entire library? that does not make sense

I hope there has been found a more efficiant solution for this, how can I restore a single image from an aperture time machine backup, I really hope I don't have to restore the entire library? that does not make sense
any suggestions?

Did you try browsing your backups in the Finder ? That is, do not go and "Enter Time Machine". Instead, navigate to your Time Machine backup via Finder and then manually go to the time period (by folder name) you are looking for ... when you find your Aperture library you can then "Show Package Contents" and find the Master you are looking for.

How can i centre a single image within a page in the print module?

I am using LR5 and am trying to print a single image using print package in the centre of the page, equal borders on all 4 sides. There has got to be an easy way of doing this?

Not too difficult, what I do is take one of the Lightroom templates, for example, single image on US letter size paper. Make sure you have your printer set for that paper size.
Then in the template drag the guidelines at the top/botton and left and right hand sides so you have an even border to the size you want. Then check Zoom to fill and grab the image and move up/down or side to side to get the best view of the image. This will probably be a cropped image as the image aspect ratio will not match your borders.
This is for LR4 waiting for the next point release of LR5
Hope this helps

If I set Firefox to refrain from loading images automatically, how can I view a single image, or a single page's images, without having to enter the site in the Exceptions list, only to go back and remove it when I'm done?

I was hoping for a hotkey option or button on the toolbar to load images for a single page for a single session at a time. Turning off images really saves bandwidth and speeds load time on websites, but sometimes I'd like to view the images on a page, but only for this session. Is that possible, or do I have to go to the Exceptions page and allow a specific domain or page to load images and then go back and remove that domain or page when I'm done?

*Image Block: https://addons.mozilla.org/firefox/addon/image-block/

How can I insert a single image that resizes to full screen when I pinch it out?

Hey there. I'm looking for a feature (similar to the gallery widget) where I can have 1 small image and when you tap or spread your fingers, it resizes to full screen. Is this possible?

Thanks, Caleb, that worked!
But I have a follow up question. So if I use Edit Mask so that I can only see a portion of the image, when I tap the image, I only enlarge the visible portion. In fact, it isn't even enlarged: I only see the same portion of the image at the same size. This is not the behaviour you get with the gallery widget. Is that also your experience, or am I missing something?
In thinking about it, I can probably make do with the gallery widget in the cases where I would like this behaviour, but it seems like this should work.

How can I delete a single password stored in Sync?

I entered a password that i don't want to be stored online. How can one remove that single password? thx for replying...

My page was blank. I took your suggestion and added some text. When I deleted all of the text the page deleted too. Thanks!!!!
Spencer

How can one display 1 record at a time

How can one display a single record at a time.
The next record should be displayed on the press of a button.
Thanks in advance

Vijaya,
I have 3 regions, each contains a check box item,
the label for which is dynamicaly generated through a SQL Select.
( &P1_ANSWER1. P1_ANSWER1 is the hidden item name)
In the Region Source,
I have put
SELECT col1 from (SELECT col1, row_number() over(ORDER BY col1) row_number from prototype) WHERE row_number = :P1_QUESTION_NO;
SELECT col3 from (SELECT col3, row_number() over(ORDER BY col3) row_number from prototype) WHERE row_number = :P1_QUESTION_NO;
for each of the reqion that contains these items,
Here the table is prototype and P1_QUESTION_NO is the hidden item.
As directed I have included under Processes (after submit and computations) on button "Next Record" clicked:
:P1_QUESTION_NO := ::P1_QUESTION_NO + 1;
When I am doing this, the label seems to blank out.
Thanks
Message was edited by:
faq123

How can I exchange all the images in a slide show with new ones

I have 18 slide shows each is a different competition for our camera club. How can I exchange all the images from each slide show with new images as our club competitions commence? I am reluctant to just delete the slide show because I will have set it all back up. I want to leave the size shape and format of the show as is, but just exchange all of the current images with new ones. I am hoping there is a quick way to delete and replace all images for each show? Each slide show has around 40 images and I have 18 shows
thank you for your help

1. Activate "thumbnails" in the configuration panel
2. Select one Thumbnail.
3. Rightclick and choose "Select same"
4. Press "backspace"
5. Open the configuration panel and load the new images.

How can I deauthorize a single computer? Says 5 are authorized. If I reauthorize all, how can I reauthorize the ones I want?

How can I deauthorize a single computer? Says 5 are authorized. If I reauthorize all, how can I reauthorize the ones I want?

http://support.apple.com/kb/ht1420

New to using Firefox with MAC: How does one save a single jpeg image from the web (as in a right click on a pc?)

New to using Firefox with MAC: How does one save a single jpeg from the internet, similar to using the right mouse click on a pc?

If your question comes about because you have a single button mouse, it's time to visit your local computer store and get a ''real'' mouse for that MAC. I don't "get" Apple, they sell their hardware for almost twice what a comparable PC would sell for - and then they leave out what is probably the most important time saving control, the right-button.
See this for setting the hidden pref for context menus in Firefox, for Mac's.
http://kb.mozillazine.org/Ui.click_hold_context_menus
type '''about:config''' in the URL bar and hit Enter
Pref Name = '''ui.click_hold_context_menus'''
Double-click to Toggle to '''True'''

On FCP7, how can I put down an image say at 1 minute in, and then have it stay put as I adjust what's in front of and after it?

On FCP7, how can I put down an image say at 1 minute in, and then have it stay put as I adjust what's in front of and after it?

Put the scene that you want to stay in one place on the timeline on a video track above the one you are editing, in the location you want it to be on the timeline, and then lock the track.
MtD

How can I place photo icons on top of folders?

I put 4 folders in my dock. I need to ID them with photo - icons.
1) How can I place photo icons on top of 3 folders, so that they also retain
their folder shape?
2) And, to make one of them look like a folder that has text?
Intel Mac - Dual - Tiger 10.4.9
Thank you.

It sounds like what you actually need to do is amend the icon itself - something like Iconographer will help you with that. Open the icon of any standard folder, copy in your photo image, amend the result to your satisfaction, and save it as a new icon. Then apply that icon to your folder.
Matt

How can i place face on another persons body for passport size.

i have a computer shop but i recently started business of photography. And i want to learn about photoshop by myself. Please help me how can i place face of one person over an other body with blue background.

Photoshop/Elements: How do I remove a background from an image or merge images?

How can I scroll around an image if its zoomed out?

Hey guys, quick one for you.
I have no problem using the hand tool/spacebar to scroll around an image when zoomed into it, but as soon as I can see the whole thing I can't scroll around anymore and its just locked to the center
I am a After Effects user so I find this a bit annoying that I can't do this, so I figure there MUST be a setting somewhere I could change to enable it.
Thanks!

by Buko wrote:
Sorry but "How can I scroll around an image if its zoomed out?" has got to be one of the stupidest question I've heard on this forum in some time. Brandon really needs to think before posting.
I've noticed your usual vitriol toward people having simple questions has ramped up about 200% since the advent of Jive, Buko. Maybe you need to disengage, or neck some holy fermented blue agave juice and take a nap?
I see the question as perfectly cromulent, and I use the suggestion I've given quite often. Apparently, a good reason why anyone would want to do that has escaped you, and it's made you even crankier than usual. So you react by giving the gift of vile condescension instead of just ShuttingTFU and letting someone else handle it. (Next time you blast Ramon for the same thing, take a look at your own behavior). And apparently, it's not enough for you to just accept that the way someone else wants to work is different than your workdflow, or is something that never even occurred to you. Maybe some folks just want an answer to their question, and secretly wish you'd shove your bad attitude up your [asterisk-substituted name for your lower-dorsal body opening]. Of course, some folks are just too polite, or they're new visitors here and won't say that to you because they don't know the legacy players and behaviors here. But I'm not either of those things, and I will. Because if you can dish it out, surely you can take it, right? RIGHT!?!?
Now...why do I think the question is worth answering? Sometimes I want to be able to have an entire smallish image visible at 100% magnification in order to view it as it will appear in its final destination. AND I want to do some work on it while keeping all my currently-open Palettes visible; maybe I want to move my image out of the way of a big dialogue box I've called up. (I'm only working on one monitor...sorry if that makes your hardened jaw drop down to your chest).
In Single-Window made mode I'd have to grab and move the whole window, but I can't do that if I have a big dialogue window open. In full screen mode I can scroll around and see all parts of that image at 100% without having to Tab my palettes to their hidden state, or shove my open dialogue nearly off-screen.
Think past your own nose, Dude! And LightenTFUp!

How can I delete a single song from my iPad?

How can I delete a single song from my iPad?

Hi lizdance40,
The first part of your answer worked great, thanks for that! However, since doing that, there are still songs on the iPad that I want to delete. I place my finger on the song, swipe to the left....and nothing. No red "delete" appears at the right. That used to work on my full size iPad, but not on this mini. I just purchased it last Friday...maybe it's defective?
Thanks again,
Sirsheila

How can one place a single image on a spread? CS3-MAC

Similar Messages

Maybe you are looking for