How can one register a new product?

I bought a new macbook pro and it didn't give me the option, when I was setting it up, to register it.
Any ideas on how to register it?
Thanks.

Don't worry.  I've done it.

Similar Messages

  • How can i sell a new product (MDR10RBT) on Amazon? Amazon directed me here to get Sony's approval, how do i do that?

    how can i sell a new product (MDR10RBT) on Amazon? Amazon directed me here to get Sony's approval, how do i do that? Thanks.

    To clarify, there is only the P2714T. There is not a 2714T. So Amazon just has it listed incorrectly. You are correct, I do not see the P2714T on the USA, UK sales sites nor do I see it on the Dell Outlet site. It is possible that Amazon bought several hundred and have them in their warehouses.

  • How can I register my new ipad air?

    How do I register my new ipad air?

    You can register its serial number to your iTunes account via : https://supportprofile.apple.com/
    Is that what you mean ?

  • Can't registered a new product

    I'm trying to registered the new iPhone that I ordered on Apple.com. It shows, "According to our records, this serial number is registered to another Apple ID. If you have more than one Apple ID, log in to My Support Profile with that Apple ID to see your other registered products." I'm positive that my iPhone is using the same Apple ID since I only have one Apple ID. what can I do to register my phone?!

    Hello there, Ichh.
    The following Knowledge Base article offers a few steps to try and some additional recommendations for issues with activating your iOS device:
    Get help activating your iPhone
    http://support.apple.com/kb/ts3424
    Try these steps if you see one of the messages above:
    If your carrier provided a SIM card, make sure it's in your iPhone.
    Restart the iPhone.
    Try to reach the activation server another way, then try to activate.
    Try connecting to a known-good Wi-Fi network if you can't activate using a cellular data connection.
    Try connecting to iTunes if you can't activate using Wi-Fi.
    Restore the iPhone.
    Check the system status for iOS Device Activation. If the iOS Device Activation status isn't green, try activating your iPhone later.
    If you receive an alert message when you try to activate your iPhone, place the iPhone in recovery mode and perform a restore. If you still can't complete the setup assistant due to an activation error, contact Apple for assistance.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • How can I register a new template in workshop

    Hi,
    I am trying to register a new template in workshop template directory, and
    work through projects, and unable to do so. Can someone help to solving this puzzle.
    Thanks,
    Gary

    Welcome to Apple Support Communities.
    Open Mail, Help
    So, create your template from scratch or edit an existing Mail template and re-save it with a new name.
    Your own saved or edited/re-saved templates are stored in the Custom list at the bottom of the Stationery types.
    The default templates remain with original names in the original folders.
    Then to use your template in a New Message, select it from Show Stationery, Custom.
    To make it easier to select Stationery templates, first open Mail, New Message, View, Customize Toolbar, and then drag the Show Stationery button to the New Message toolbar. (It will not ever appear in the default Mail toolbar, only the New Message toolbar, and can only be added to the New Message toolbar.)

  • How can i register my New Ipad with two different device running on windows platform.

    can i register my ipad with my home lappy and my office desktop running on windows platform.so that there will be no issue while syncing my ipad with two differenr device.

    Bernard Baz wrote:
    Is there a 3rd party app that could help and that would not relie on iTunes.
    Use iCloud to backup the iPad. Many users don't use their iPads with iTunes at all anymore. Personally, I would never rely only on iCloud, but I would guess that millions of iOS users are now using only iCloud and not backing up with iTunes at all.
    iOS: How to back up and restore your content - Support - Apple

  • I can't register my new product "USB Superdrive"

    Yesterday I bought an USB Superdrive, but I can't register the serial number.

    Where did you get the idea it had to be registered?

  • How can I get my new laptop registered for warrenty service? Is there an on-line option?

    How can I register my new pc on-line?  There is nothing about it in the warrenty book.

    HI
    Try this link Hope this helps!
    https://register.hp.com/americas/flowPage/default/defaultExperience/en_US/faq.do#1
    **Clicking on the Kudos! white star is a nice way to say thank you on any post that helped you or resolved the problem.**
    **Selecting "Accept as Solution" for a reply that solves your issue helps others who are searching the web for an answer**
    **Clicking on the Kudos! white star is a nice way to say thank you on any post that helped you or resolved the problem.**
    **Selecting "Accept as Solution" for a reply that solves your issue helps others who are searching the web for an answer**

  • HT4623 How can I get rid of this new update and go back to the previous one and how can I register a complaint with Apple?

    How can I get rid of this new 7.0.2 update and go back to the previous one and how can I register a complaint with Apple?

    You can't go back.
    You can leave feedback: http://www.apple.com/feedback

  • I have a DVD Acrobat Pro 9. I upgraded laptops and trying to install but the DVD is not readable. How can I get a new DVD or Download Acrobat Pro 1. The product is registered and I have the serial number. PS: Contacting Adobe on this issue is impossible..

    I have a DVD Acrobat Pro 9. I upgraded laptops and trying to install but the DVD is not readable. How can I get a new DVD or Download Acrobat Pro 1. The product is registered and I have the serial number. PS: Contacting Adobe on this issue is impossible... direct support stinks.

    Download AA 9 Pro from http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html. Make a new backup for your archive. You might also take the DVD to your library to see if it is a drive problem. You might also carefully clean the DVD with water and soap (do not use anything that would scratch the surface or you have destroyed it for sure) and see if that solves the problem. This is particularly an issue if you have finger prints or other crud on the DVD. However, it could also be a bad drive as I mentioned. Hopefully the download solves your problem in any case (I would backup the download to CD and/or backup HD).

  • I registered my ipod touch on my other apple ID. i dont need that apple ID so i created a new one. how can i register my ipod touch into my new Apple ID?

    i need help on registering my ipod touch into my new apple ID. i dont want to use the other ID. so how can i register it into my new Apple ID?

    Changing Facetime settings on an iPod will have no affect on cellular settings on an iPhone. Something else is going on there. If she did not change any settings on the phone, then nothing she did could affect your celluar 3G.

  • How can I modify an incorrect mailing address on my AppleCare Protection Plan certificate? After I registered a new product with AppleCare I realised that I'd entered the wrong postal address and I need to update it to show my correct address.

    I need to modify an incorrect mailing address on my AppleCare Protection Plan certificate. After I registered a new product with AppleCare I realised that I'd entered the wrong postal address during the registration process and now I need to update my details to show my correct address. I've been trying for several hours to find a way to modify my address on the AppleCare site, with no success. Any help/advice would be greatly appreciated!

    Contacting Apple World Wide for Support and Service
    http://support.apple.com/kb/HE57
    Apple Contact USA
    http://www.apple.com/contact/

  • My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

    My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

    http://support.apple.com/kb/TS2005
    http://support.apple.com/kb/HT1861
    https://ssl.apple.com/support/proapps/serialnumbers/

  • I forgot the administrator password for my mac and cant set a new one without it how can i set a new one

    i forgot the administrator password for my mac and cant set a new one without it how can i set a new one

    Reset Password 10.7, 10.8...
    http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/

  • How can I create a new Care Plan with one or more care tasks

    Hello,
    I'm working on a Dutch website in the HealthVault Environment. I got difficulties in creating and updating a careplan with care tasks. Most likely it's due to lack of knowledge...
    Following code works fine:
    CarePlan plan = new CarePlan();
    plan.Name = "test";
    this.PersonInfo.SelectedRecord.NewItem(plan);
    It creates a plan called [test]. But I don't know how to create a plan with one or more tasks in it: the tasks property is read only.
    https://msdn.microsoft.com/en-us/library/microsoft.health.itemtypes.careplan.tasks.aspx
    Half a year ago I was able to add an example of a careplan, which was a feature of the dev tools, but for some reason that's not possible anymore.
    https://developer.healthvault.com/DataTypes/Overview?TypeId=415c95e0-0533-4d9c-ac73-91dc5031186c
    So my question is, how can I add a new care plan with a task like the example from the HealthVault dev tools:
    <tasks>
    <task>
    <name>
    <text>Run 100 miles</text>
    </name>
    <description>Run 100 miles in 6 months</description>
    <start-date>
    <structured>
    <date>
    <y>2013</y>
    <m>12</m>
    <d>1</d>
    </date>
    </structured>
    </start-date>
    <end-date>
    <structured>
    <date>
    <y>2014</y>
    <m>6</m>
    <d>1</d>
    </date>
    </structured>
    </end-date>
    <target-completion-date>
    <structured>
    <date>
    <y>2014</y>
    <m>12</m>
    <d>31</d>
    </date>
    </structured>
    </target-completion-date>
    <sequence-number>279128532</sequence-number>
    <recurrence>
    <interval>
    <text>Once</text>
    </interval>
    <times-in-interval>10</times-in-interval>
    </recurrence>
    <reference-id>p01vil21ckg7k2346y1g60337mmi20sg564l321l8pmpqev39n302572sewu76lh9019s3993e02924</reference-id>
    </task>
    </tasks>
    Any help is welcome 
    Wilfred

    Hi Wilfred,
    Have you tried this?
    CarePlan plan = new CarePlan();
    plan.Name = "test";
    plan.Tasks.Add(someTask) 
    If you have a task list already, you would need to enumerate through it and add one by one...
    foreach (var task in existingList)
        plan.Tasks.Add(task)

Maybe you are looking for

  • How to call another class function in SharePoint?

    Facing 'ConvertViewToHtml' does not exit in current context. Here is my code: namespace ChangeControl3_Nov class eGA_Utility public static void SendmailwithTwo(string To, string subject, string Body, string frommail, byte[] docFile, byte[] docFile1,

  • Phone died 2 1/2 months til upgrade

    My pantech perception recently died and after trying all of the do it yourself fixes it looks like its completely shot, I went to a verizon store and said theres nothing they could do in regards to an early upgrade so i'm currently using a prepaid tr

  • Stop IE upon start up

    I've tried everything I can think of to stop Explorer from opening on start up and get Safari instead. Any suggestions?

  • Invalid Descriptor Index After First Record

                   recordCount = 1;                if(rs != null)                     rs.last();                     totalRows = rs.getRow();                     rs.first();                     System.out.println("Total Rows: "+totalRows);               

  • OT - survey of entry level FCP editing jobs

    I work with a school and we want to train students in video production and editing. I'm looking for the following info from anyone working in the industry who has worked with entry level FCP editors or is looking to hire people to do this: 1. Does FC