How can One sender communication channel pick two file from two location

Hello
I have a requirement that how can One sender communication channel pick two file from two location.Both the file has same name...How to configure the one receiver communication channel.i dont have any IR,no mapping..Please help me...

>
Soumitra Sinha wrote:
> Hello Vijay
> I already done the adapter specific message attribute.i am getting the file name properly.but that is nothing to do with my req.i am again clearing my problem:
> i have two folder folder a,folder b.Both has the same file credit0002. i have two destination folder i have one sender and one receiver channel.I dont have any IR.How one sender channel can pick file from two location and how one receiver channel can put in two location.please help me..
Ok now I get your requirement.
you cant achieve this - how one receiver channel can put in two location if you dont have a dynamic configuration defined i.e Adapter specific attributes.
easy way - involve IR mapping
else
have a adapter module to define your dynamic configuration.
Ref: /people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules & /people/michal.krawczyk2/blog/2006/10/09/xi-dynamic-configuration-in-adapter-modules--one-step-further
Set the dynamic directory/file name etc for your receiver adapter.

Similar Messages

PI sender communication channel not reading files from NFS directory

Hello,
I have a sender communication channel configured to read file from NFS directory which is on ECC server. A program in ECC generates the file and puts it on the ECC server in the output directory. PI sender communication channel is supposed to pickup this file and process it. If I give the NFS path as the source directory, I am getting error: Configured source directory '//Server/DIR/OUT' does not exist. I tried putting '
Server\DIR\OUT' too but same error. Do I have to add the NFS path of ECC into PI as logical path?
Any suggestions?
Thanks,
Sangita

Hello Sangita,
Your ECC server is an external system, therefore you need to activate FTP service in that system and use the transport protocol FTP:
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
You can use NFS protocol when you have a local directory in XI server.
Best Regards,
.Luis Bernal.

How can one change the channel of a screen control within Mainstage?

The issue that I'm having is that some 3rd party apps (Dimension Pro in particular) seem to receive Sustain (64) messages on only Midi Channel 1
I'm using a multi zone controller, with sounds set in MainStage to respond to different channels. I've got it all working well except . . Dimension Pro won't "see" a controller message if it's sent from any channel other than channel 1.
I was even having the same problem with certain sounds in Kontakt.
So the question is . . how can one shift the channel of these messages over to channel 1?
Better question, how can I get Dimension Pro to respond to a controller on a channel other than 1, but I suspect this is not the forum for such questions!
Thanks in advance,
Mark
MacOS 10.7.3
MainStage 2.1.3
Axiom 61 (2nd gen) keyboard controller

You may be able to achieve the desired results by a different method. I have an Axiom, but I don't assign zones in it. I just send one zone to Mainstage and handle it all there. You can layer and or split a practically unlimited number of instruments and assign screen controls easily. You probably want to set up all screen controls at the concert level in layout mode. You can later override concert mapping in individaul patches if you want. For instance, you could use an expression pedal for volume(7) on one patch and for modulation(1) on another patch. You can send that control to one instument channel strip or you can choose to send to all. To do this, select a screen control in edit mode. In the screen control inspector, check the overide concert mapping box. You will then see two additional tabs-mappings and unmapped. Select the mappings tab. In the mapping list, double-click "Unmapped". You can the map the screen control to any single instrument channel strip in this list or send to all. Select one and then choose a mapping destination. If you want to map expression to one instrument and not others there's another way. Select an instrument channel strip, then selct MIDI input in the software channel strip inspector. Check the filter expression box. This instument will now not respond to expression, but the other intruments in this patch will. You can filter some other events on this page. The layer editor tab allows you full control ol splits and layering options of all your instruments in this patch. Hope this helps.

How can one send email-sized photo files as attachments in Mail, without the photos appearing within the email?s

How can one send email-sized photo files as attachments in Apple Mail, without the photos appearing in the body of the email? If it can be done, it's not at all obvious, at least not to me. Thanks for any help you can provide.

The "View as icon" option shrinks the photo to an icon in the sender's Apple Mail, but how it appears to the recipient varies dependingy on what e-mail client he/she uses.
Using Apple Mail 5.0 (the Lion version) at both ends, the sender can use the "View as icon" option to shrink his view of the photo to an icon, but the recipient also using Apple Mail 5.0 still sees the full photo in line with the message text. The recipient can then use the "View as icon" option to shrink it to an icon, but I don't think that's not what jackofarabia is looking for.
As far as I know there is no way in the current Apple Mail to do what jackofarabia wants. There should be, but there isn't.

How can i send the music, photos and films from extern hdd to time capsule?

how can i send the music, photos and films from extern hdd to time capsule?

Hi Niel, i open Time Mchine, starts a new screen where i can see all Data (program etc.), my macbook and my extern hdd. there i have musik, films and picture...when i click them, where i have to set them?
Sorry, i got the last 20 years a pc, this is my first macbook pro and from today my first 2TB air port time cap.

How can I login and retrieve my user file from the trash?

I was trying to find out where all my HD had gone, which a did using ‘What Size’.
I found what looked like an old backup file so I put the file in the trash.
It turns out that the file was my user file. So now I can’t login to as the user.
How can I login and retrieve my user file from the trash?

The Digital Editions forum is here, in case this is what you are talking about:
http://forums.adobe.com/community/adobe_digital_editions
If you are not, I apologize for the misunderstanding.

HT204003 how can i print a boarding pass image file from passbook?

how can i print a boarding pass image file from passbook?

I do not believe that Passbook supports printing. You can email, but not print. Then again I'm not sure what it actually emails, if that is a graphic of the card or what. I'm going to try it with my Starbuck's card, but there is no setting for printing within Passbook.
EDIT: Actually it sends the email as an attachment for a Passbook card file, that cannot be handled by my computer. Hope that answers your question.
Message was edited by: ChrisJ4203

How can I copy the whole directory of files from PC to iPad?

How can I copy the whole directory of files from PC to iPad ?

Get an app that reads PDF's, such as iBooks or GoodReader or Readdle Docs, then use the file transfer part of iTUnes to get those files to your iPad, through iTunes. ( I have no experience with goodreader, but with ReaddleDocs you can move the files, then create folders to put them in to keep them organized)

How can I download all my raw+jpg files from new Canon SX50 HS camera?

How can I download all my raw+jpg files from new Canon SX50 HS camera? Some work and most won't.

Are you running Lightroom 4.3 which is the minimum version required for that camera?
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

How can I generate and/or retrieve log files from iPad

How can I generate and/or retrieve log files from iPad?
OBS!
There are NO files apearing in ~/Library/Logs/CrashReporter/MobileDevice/<name of iPad> so where else can i find it?
I want to force it to produce a log, or find it within the iPad.
It is needed for support of an app.

Not sure on porting out the log data, but you can find it under General->About->Diagnostic&Usage->Diagnostic&Usage Data. It will give you a list of your log data, and you can get additional details by selecting the applicable log you are looking for. Hope this helps.

How can we stop communication channel at run time?

Hi,
I have a requirement where in we have to stop the JMS Sender communication channel in case the Receiver System is down. Could you please let me know how to stop the sender communication channel at run time.
Thanks
Rajeev Gupta

Rajeev,
Like Praveen Kumar said, I dont think there is an out of the box solution for this. But if you want to stop the communication channel, you could do it using a BPM.This solution is just something that came to my mind. It would be resource intensive to implement this. But here goes...
Try to make the call to the Receiver System a synchronous call and have an exception branch in the block which has the synchronous step type. So if the Receiver System is down you would get an error in the Sync Step Type and it would go to the exception branch.Try to make a HTTP call from BPM to stop the communication channel. The URL for the HTTP call could be what Matias Denker suggested. This would stop the communication channel. This solution might however have two disadvantage that i foresee.
1) It might stop the communication channel not only for system down but for any kind of synchronous error.
2) Starting the communication channel has to again be a whole different process.
Thanks
Praveen M

How can I send an email to a group from my iPhone?

I want to send an email to a group in my contacts, but when I select the group, the individuals display for selection. How can I send an email by addressing it to the group?

I recently upgraded my wife's computer to mountain lion so we could sync it with her iPhone, allowing her to send emails to the groups she manages whether she's at home or on the road.
Is it really the case that the iPhone is incapable of this? The mac does it fine and the iPhone goes through the motions but then bails when you hit send, saying it isn't a valid address.
This really makes no sense. Isn't this the whole point of iCloud?

Inactive Sender Communication Channel still processing Files?

We de-activated the Sender Communication Channel of an interface. However, the file adapter keeps processing?
Anybody know what is going on?
Thank-You.

Hi Tom,
1) Check out Whether you have De-activated the Right Adapter.
2) Refresh the Cache,
a)Start transaction SXI_CACHE.
b)From the context menu XI Runtime Cache select Start Complete Cache Refresh.
c)Call transaction SM58 to check the status of the refresh process.If no entry for function module SAI_CACHE3_REFRESH_BACKROUND is Present any more the cache update is finished.
If you still face issue try this .
Many actions require to access System Landscape Directory content from the Integration Builder. To optimize performance, this content is loaded into a cache so that the System Landscape Directory does not have to be accessed directly each time that System Landscape Directory content is required.
However, this cache is not automatically updated if changes are made to the content of the System Landscape Directory. For this reason that we delete the System Landscape Directory cache if changes have been made to content in the System Landscape Directory. The cache is then filled each time that the System Landscape Directory is accessed. If we log on to the Integration Builder after we have made a change in the SLD, we do not need to delete the SLD cache.
To clear the SLD cache, from the Integration Builder main menu, choose Environment ® Delete Cache for SLD Data.
Once we have deleted the cache for SLD data, accessing objects in the SLD may take longer than usual initially.
Regards
Agasthuri Doss

How to pick different files from different locations

suppose ur having multiple files(csv) from different locations,then how do u move those files to the SAP system.Please expalin me the scenario

Venu,
If the files are present in different folders, then you need different sender communication channels to bring this data to XI. Regarding connection with SAP, you can go for a proxy (If the webAs version is > 6.2) or else go for an IDOCor RFC adapter.
Regards,
Jai Shankar

How can I move back the rman convert file from file system to ASM?

I have no idea on pluging-in the data files which were unloaded as follows:
SQL> alter tablespace P_CDDH_DSPGD_V1_2011 read only;
SQL> alter tablespace P_IDX_CDDH_DSPGD_V1_2011 read only;
SQL> exec dbms_tts.transport_set_check('P_CDDH_DSPGD_V1_2011,P_IDX_CDDH_DSPGD_V1_2011',true);
SQL> select * from transport_set_violations;
UNIX> expdp tossadm@pmscdhf1 dumpfile=ttsfy1.dmp directory=trans_dir transport_tablespaces = P_CDDH_DSPGD_V1_2011,P_IDX_CDDH_DSPGD_V1_2011
RMAN> convert tablespace P_CDDH_DSPGD_V1_2011, P_IDX_CDDH_DSPGD_V1_2011 format = '/appl/oem/backup/temp/%I_%s_%t_extbspace.dbf';
Starting conversion at source at 03-OCT-13
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=116 instance=pmscdhf11 device type=DISK
channel ORA_DISK_1: starting datafile conversion
input datafile file number=00079 name=+PMSCDHF1/p_cddh_dspgd_v1_2011_01.dbf
converted datafile=/appl/oem/backup/temp/3536350174_2820_827849001_extbspace.dbf
channel ORA_DISK_1: datafile conversion complete, elapsed time: 00:02:15
channel ORA_DISK_1: starting datafile conversion
input datafile file number=00080 name=+PMSCDHF1/p_idx_cddh_dspgd_v1_2011_02.dbf
converted datafile=/appl/oem/backup/temp/3536350174_2821_827849136_extbspace.dbf
channel ORA_DISK_1: datafile conversion complete, elapsed time: 00:01:45
Finished conversion at source at 03-OCT-13
Starting Control File Autobackup at 03-OCT-13
piece handle=/dbms/oracle/r1110/db_01/dbs/c-3536350174-20131003-02 comment=NONE
Finished Control File Autobackup at 03-OCT-13
SQL> drop tablespace P_CDDH_DSPGD_V1_2011 including contents;
SQL> drop tablespace P_IDX_CDDH_DSPGD_V1_2011 including contents;
Afterward, how can I relocate the backup files "/appl/oem/backup/temp/3536350174_2820_827849001_extbspace.dbf", "/appl/oem/backup/temp/3536350174_2821_827849136_extbspace.dbf" back to the ASM group +PMSCDHF1 ???

The 11.1 documentation only says "Enables you to copy files between ASM disk groups on local instances to and from remote instances" and "You can also use this command to copy files from ASM disk groups to the operating system."
http://docs.oracle.com/cd/B28359_01/server.111/b31107/asm_util.htm#CHDJEIEA
The 11.2 documentation says "Copy files from a disk group to the operating system Copy files from a disk group to a disk group Copy files from the operating system to a disk group"
http://docs.oracle.com/cd/E11882_01/server.112/e18951/asm_util003.htm#CHDJEIEA
I've never tried 11.1
Hemant K Chitale

How can One sender communication channel pick two file from two location

Similar Messages

Maybe you are looking for