How can one start with ECC6.0 ??

Hi Sap Gurus -
I am new to Sap , and would want to know how one can catch up with the technolgy. Ecc6.0 comes with BI7 and with other Sap applications integrated to it? am I right?? How can one have hands on practice with the Software so as to gain expertise?? Which Software shop can one get it for personal studies, not for anything enterprise? Thank you.. You can reach me on my email : [email protected]
regards,
Ekene

I'm not professional in J2MEDo you know java? if not, start by learning java.
If you are already proficient in java, start with the javadocs and exercises for j2me / midp available in plenty on the internet.
Happy coding, Darryl

Similar Messages

  • HT201274 Can a Sprint Iphone 5 work with T-mobile network? How can one unlock with the MSL code? Sprint is not abiding by the Unlocking Consumer Choice and Wireless Competition Act.  FCC will only enforce if we file more complains.

    Can a Sprint Iphone 5 work with T-mobile network? How can one unlock with the MSL code? Sprint is not abiding by the Unlocking Consumer Choice and Wireless Competition Act.  FCC will only enforce if we file more complains.

    T-Mobile is a GSM network whereas Sprint is a CDMA network. They are incompatible. Sprint is not obliged to unlock a phone that is still under contract. Their phones may not be capable of being unlocked.

  • Page numbering- How can I start with a specific Page #?

    I'm using Pages 09 (snow leopard, and Pages on my iPad IOS 4.3.5) and I'm trying to get pages to start numbering using specific numbers.  For example lets say I'm editing chapter 3 of a book which starts on page 84.  Chapter 3 is its own document and always starts numbering with page 1.  I know I could make one large document by pasting all the chapters into a single doc, but I hate working on such large documents.  Editing single chapters at a time is easier to navigate.
    Is there anyway to get the page numbering to do this?  I've tried all the options in the page set up and nothing seems to work.  Pages always start with 1 at the begining of a document.
    Thanks in advance for any help!
    Cheers!
    David

    In Pages on your Mac you used the inspectors for most functions. You can change starting page numbers in the section tab of the layout inspector.

  • On opening 2 browser Tabs are displayed doubling the infomation how can I start with only one browser Tab?

    each time I access firefox 2 tabs are created each with the same information. To retrieve the information I must manually close the second tab else the info will not display properly. I am wondering is there something I can do to stop this from happening? It happens with direct open or from a link and if allready on a web page and open another via link 2 more Tabs are created it can become very crowded and hard to know which was first tab created. I do hope you understand what is happening and hopefully there is a cure. Thanking you Graham Rice

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • How can I start anew with Photos and clear the (minimal) stuff it has uploaded

    I've about had it up to here with this new Photos scheme. I reorganised my Aperture libraries on both my iMac and MBA in preparation for this, delayed turning Photos on for a couple of days until I thought everything was ready based upon the limited advice that was out there, and then got stuck in an endless loop of "uploading" and "preparing" every time I opened Photos. There are 19,975 images in my Aperture library on the iMac. I was stuck at Uploading at anywhere between that number and 19,000 with no progress after hours of waiting. I tried all the tricks mentioned here including re booting, restarting the app, repairing/rebuilding the database, killing the "cloudd" process, etc.today Today when I restarted Photos, it now said I had 23,775 images to upload- 4000
    more than I have-and of course it got stuck there, like it has for the last week.
    I copied the previous Aperture library (pre Photos migration)back to my iMac and opened it in Aperture. Thankfully, all the photos I had taken on my iPhone this week during this Photos clusterphuck transition were in the Aperture Stream so I didn't lose any of those. I'm willing to give this whole thing one more shot. So  i need some advice. How can I start anew with Photos and clear the (minimal) stuff it has uploaded (about 6000 of 19,000 images in the last 7 days) ? If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
    <Re-Titled By Host>

    How can I start anew with Photos and clear the (minimal) stuff it has uploaded (about 6000 of 19,000 images in the last 7 days) ? If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
    It is hard to say from your post, why the migration did not succeed in your case.
    by "stuck on upload" do you mean, you opened the Aperture library in Photos, and Photos converted it to a Photo Library, and then the upload to iCloud Photo Library did hang?  Or did already the upgrade to the Photo Library fail?
    If you want the Aperture library to upload to iCloud Photo Library, it needs to be on a disk formatted MacOS Extended (Journaled) and the original image files must not be referenced. Referenced originals will not upload.
    Also, the upload may hang, if you do not have enough free iCloud storage, orr if one of the videos or photos in your library is in an unsupported format or corrupted.
    To start over, try to repair and rebuild the Aperture library before opening it in Photos. Try all Aperture Library First Aid options - starting with repairing the permissions.  (Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual)
    If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
    You will have to delete the photos that are already in icloud too; otherwise you are risking duplicates.
    Can you launch Photos at all?  If yes, delete all photos in Photos and empty the Recently Deleted album. Wait for the deletion to sync to iCloud. Then delete the Photos.photolibrary.

  • How can I start using IPad without first syncing with my computer?

    I'm out of town and just bought a new IPad2.  I don't have my computer with me and won't be able to use it for another 2 weeks.  How can I start using my IPad before syncing with my computer? 

    You must activate it by syncing it to iTunes on a computer. An Apple Store can do it for you - or anybody with a computer that meets the minimum requirements and has iTunes 10.2 on it can activate it for you.
    If you have someone else activate it, bear in mind that when you do finally sync to your computer, iTunes is going to tell you that all content will be erased because you already set it up on another computer with another iTunes library. Your iPad will sync to one iTunes library only. That is way they are designed to perform.
    You CAN transfer any purchases that you make on the iPad to your iTunes library when you perform your first sync with your own computer, however, and I would strongly suggest that you do that when you get the chance.
    If you do set it up with another computer, I would keep the purchases and downloads to a minimum so that keeping all of your data is not a big problem when you finally sync to your own PC.

  • How can one powershell.exe session start up a new powershell.exe session in a new window?

    How can one powershell.exe session start up a new powershell.exe session in a new window?

    Er... good luck with that.  :)  If you know the shortcut that was used to launch the current window, you could pass that shortcut path to Start-Process, but that would only work if you did not move or resize the original window, etc.  For
    example, on my computer I can do this:
    Start-Process 'C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Accessories\Windows PowerShell\Windows PowerShell.lnk'

  • My hard drive died.  How can I start my computer with my Time Machine external drive?

    My hard drive died.  How can I start my computer with my Time Machine external drive?

    Pondini wrote:
    If you're on 10.7.2, yes, you can boot from the TM drive.
    Beep, beep, beep....
    Hold ON! Getting a call on the red phone.
    "Yes...yes.... ok!"
    It's confirmed, H.e.l.l. has finally frozen over!  TM drives are now bootable!
    Still it's not a real bootable clone, can't run the computer off the external drive for long in only Recovery mode, still requires the boot drive to be replaced if it not functional, and with TM backing up every hour, isn't going to offer much software protection as the TM drive is just as likely to be as messed up as the internal boot drive.
    For a iMac it still requires the computer to be taken in to Apple for a drive replacement, as ONLY Apple can do it due to proprietary connections and firmware on the iMac hard drives.
    But it is bootable!
    The backup time factor can be controlled using TimeMachine Editor, from every hour to just when the user thinks it's necessary.
    Apple lurches slightly forward!  Hurray!
    Question is, can one restore from earlier stable TM's or just the last one? In this bootable fashion?

  • How can one cancel an iTunes purchase after download has started

    How can one cancel an iTunes (movie) purchase after download has started but not completed

    The reply from cor-el assumes that the question was about an ordinary download, managed by the "Downloads" panel interface. A Firefox update does its downloading (before installation) with a different interface panel. I do not have a screen-capture of the actual panel in that it's appearance happened a few days ago and our final approach was to suspend the automatic download (note that that had been started in error), and then to do all the manual steps we usually would do for a deliberately, manually-started, update. But the "hanging in mid-air" update forced us to do that update in a way and at a time that we ordinarily would not do it.
    I still contend that the Firefox update progress panel (whatever it is labelled) does *'''NOT*''' have any obvious cancellation interface, not even the "x" noted above. (... and if it *only* had an "x", in my opinion that would not be a sufficiently obvious interface as compared to having a "Cancel" button.)
    I am replying in this thread on behalf of "shepdog" as I am our local desktop support for the particular Macintosh. Please consider this reply as a mark that the reply from cor-el, while it was a correct answer, was not an answer to the particular question that was asked, i.e., "Not Helpful".

  • I just bought a new computer, how can I start syncing with this computer without erasing everything already on my iphone?

    I just bought a new computer, how can I start syncing with this computer without erasing everything already on my iphone?
    Everytime I try to use the option sync manual it wants me to erase everything.
    Please help

    The iPhone can be synced to one and only one computer at a time. Before you "marry" it to your new computer, be sure your new computer contains all the old computer's information. When you sync the iPhone to a new computer, it will be erased first. Then, whatever is on your iTunes Library will be synced to the iPhone.
    Read: iTunes: How to move your music to a new computer
    You can also copy its previous backup from the old computer to the new one, then "restore from backup".
    From iTunes: About iOS backups
    Where iTunes backups are stored on your computer
    The folder where your backup data are stored varies depending on the computer's operating system. Make sure the backup folder is included in your periodic data-backup routine.
    iTunes places the backup files in the following places:
    Mac: ~/Library/Application Support/MobileSync/Backup/
    Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    Note: To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
    Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
    Note: To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press the Return key.

  • I can't download from app store apps. if i try then open account and ask me shange payment type because there is a billing problem with a previous purchase. I download one game 0.99 and nothing more! help me. How can i contact with apple?

    I can't download from app store apps. if i try then open account and ask me shange payment type because there is a billing problem with a previous purchase. I download one game 0.99 and nothing more! help me. How can i contact with apple?

    Click here and ask the iTunes Store staff for assistance.
    (102938)

  • Regarding iMessage, when i want to send text to a person in my contacts app, i've been getting a message saying the number has not been registered with iMessage.  How can one fix this problem?

    Regarding iMessage, when i want to send text to a person in my contacts app, i've been getting a message saying the number has not been registered with iMessage.  How can one fix this problem?  It works on the iPhone.

    It takes two to tango, maybe it's your recipient that has weak Internet/Cellular connections.

  • How can I talk with more then one person at a time?

    How can I talk with more then one person at a time? With Faxe time? Is thier software needed to do this or can it be done with the basic package?

    You can get the drop down list by either right-clicking on the back/forward buttons, or holding down the left button until the list appears.
    If you want the drop-down arrow you can add it with the Back/forward dropmarker add-on - https://addons.mozilla.org/firefox/addon/backforward-dropmarker

  • How can one use Mission Control with two monitors?  Please bring Spaces back

    How can one use Mission Control with two monitors.  With Spaces I could treat each space as a single desktop.
    SyBB

    I use two monitors at work and have no issue. I have my mail set to use Desktop 1 and iTunes set to the second monitor of Desktop 1. I have browsers set to Desktop 2 and Fusion and RDC set to Desktop 3.
    Two things that may help you. In System Preferences > Mission Control, disable the setting "Automatically rearrange spaces...". This screwed with assigning applications to certain spaces. And the other thing is don't use full screen on apps that support it. This just makes your second monitor superfluous.

  • How can one accept that the only way to sync with OSX 10.9 is through I cloud?

    How can one accept that the only way to sync with OSX 10.9 is through I cloud?
    One is now obliged to send private information to an external server...

    Thank you for the link but what a waist of time.
    Who is the idiot that decided to drop manual syncing of contacts and calendars?
    I am on the point of dropping all APPLE machines!
    I am looking to sync without having to worry about security issues, keeping my files and passwords locally on my machines, and not an external server such as a cloud drive.
    Do you know if Outlook syncs also over an external server?
    Do you know of this solution? http://www.codetwo.com/public-folders/share-windows-files-securely/

Maybe you are looking for