How can open mobile passcode of i5 phone if we forget the passcode of mobile?, how can open mobile passcode of i5 phone if we forget the passcode of mobile?
dear sir
how can open mobile passcode of i5 phone if we forget the passcode of mobile?, how can open mobile passcode of i5 phone if we forget the passcode of mobile?
thanks
raj
mail id [email protected]
Do as the manual says and restore the iphone
Similar Messages
-
how do I get my passcode (not password) in my iphone5s sent to me via email. It's the one that is asked whenever you have to unlock the phone. I got used to having my thumb mark open it that I forgot it after my phone got recharged after it drained out. Apparently, the fingerprint won't do after the phone was drained and recharged again. The passcode has to be typed in. I don't usually allow my phone to drain out except this one time on a long trip. Hence I forgot my passcode and I prefer it being sent to me via my registered email. I know that if you enter it several times, the phone gets locked out over certain periods from 1 minute to 60 minutes so I don't want to take that risk. Any suggestions?
First, this is a user-to-user technical support forum, not a way to communicate with Apple.
That aside, no one can email your passcode to you because no one (not even Apple) knows it. The passcode exists in only one place - on the phone. You will have to restore the phone using the computer that you regularly sync it to. This will reinstall iOS, remove the passcode, and restore your most recent backup.
Edit:
See: iOS: Forgotten passcode or device disabled after entering wrong passcode for more details -
hai.can i check with u..i forgot my password..n its stated phone disabled n connect to itunes..so how do i continue from here..n is my data still in my phone..thanks
If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
If you have forgotten your Restrictions code, then follow the instructions
below but DO NOT restore any previous backup. If you do then you will
simply be restoring the old Restrictions code you have forgotten. This
same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake
and Home buttons at the same time. When the device turns off, release the Sleep/Wake
and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device.
The device should turn on. Note: If you see the screen pictured below, let the device
charge for at least ten minutes to ensure that the battery has some charge, and then
start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button.
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
When I open aperture a pop up appears that tells me that my mobil me photos will be moved. When I click OK, nothing happens and I have left it for hours. I can not get rid of the pop up and I can not get out of aperture. I have to force the computer to shut down. Any thoughts?
Quit Aperture - force quit if necessary (or try this:
If Aperture is unresponsive, how to avoid force quitting?
Launch Aperture again. When the panel appears, press the "Learn more" button, not o.k.
Then use the "File > Web Accounts > Manage Web Accounts" menu entry from Aperture's main menu bar and remove "MobileMe" from the list of accounts in the accounts pane by pressing "-".
If the above does not work, disconnect the internet (Wi-fi, Ethernet, whatever you have), before you launch Aperture again. Now the panel should no longer appear.
Also sign out of MobileMe in the System Preferences Mobile Me tab, to stop the panel to appear again.
Good luck
Léonie -
My Iphone was sync with Itunes on a computer then this computer broke down and i purchased another one. I was able to extract all the data from the old one. now how can i sync my phone with the new tunes without loosing any data?
Yes, windows to Mac too.
iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
Windows users see tip at: https://discussions.apple.com/message/18879381 -
The message icon on my iphone indicates that there is an unopened text message, but when i go into it, it just opens up a blank message, and there is no option to delete it. Any suggestions how i can get rid of this message, and prevent my phone from always opening up in the blank message whenever i go into my messages, rather than just opening as my inbox?
Many thanksHard restart.. While the phone is powered in, hold the power and home button. Hold them down and keep them held down. the phone will eventually shut itself off and reopen. keep held down till you see the appl elogo, then release. This will not delete anything off your phone, it will just force all apps to stop their current process. If you just turn the phone on and off, it will just pick up where it left off. Good luck
-
i have an app update on my phone through the app store, but i dont have that app and when i hit update it says the item is no longer available for sale,, but i cannot get rid of the little 1 at the corner of the app store app,, how can i get rid of it,, i have iphone 5
You installed a hacked app, originally from the Mac App Store. It contains the receipt for a different app, downloaded using an account that you don't control. You need to identify and remove the hacked app.
Important: The app you need to remove is not necessarily the one named in the App Store notice. For example, if the App Store says you need to update "Twitter," the hacked app may be "Angry Birds" or something else entirely. Don't make any assumptions about which app you're looking for. To find it, you have to carry out a systematic search.
Triple-click anywhere in the line of text below on this page to select it:
kMDItemAppStoreHasReceipt=1
Copy the selected text to the Clipboard (command-C).
In the Finder, press the key combination command-F to open a search window, or select
File ▹ Find
from the menu bar. In the search window, select
Search: This Mac
from the row of tokens below the toolbar. Below that is a popup menu initially showing Kind. From that menu, select Other...
A sheet will drop down. In that sheet, select Raw Query and click OK or press return.
Now there will be a text box to the right of popup menu. Click in that box and paste (command-V).
The search window will show all the App Store products you've installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
At least one of the items listed in the search window is not among your purchases in the App Store. Move each such item to the Trash. You may be prompted for your administrator password. Empty the Trash.
Log out and log back in. Test. -
My iPad is disabled, but I know the passcode.. When i connect it to iTunes it says it can't access it because it has a passcode. How can i get rid of the passcode without resetting the iPad? And if there is no way to do so, how do I completely reset it?
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
After I updates ITunes to the latest version (12), ITunes wont find my iphone and Ipad anymore, after searching I found that the Apple Mobile Device USB Driver is not listed anymore, on the support website of Apple it doesnt explain how to solve this,.
I use Windows 8.1 and so now also ITunes 12, both my Iphone 4S and Ipad Air have the latest IOS version.
I hope anybody can tell me how to solve this that the Apple Mobile Device USB Driver is back, thank youFound a possible solution for me.
While the phone was plugged into my computer and iTunes is CLOSED.
1. I went to Services in Windows.
2. I selected Apple Mobile Device and right clicked and selected "Stop".
3. Then I right-clicked again and selected "Start".
4. Then I went to Device Manager and right clicked my iPhone with the yellow alert icon and selected "Uninstall". You will get a warning about uninstalling the device. Click OK.
5. At the top of Device Manager I clicked the Action menu and selected "Scan for Hardware Changes".
This re-installed the iPhone and everything started working again. -
I lost my iphone and had to replace it. All my contacts were on my original iphone which wasa a version 4.
I had to replace the phone and now have a 4S. I had never backed up my original phone. How do I download all my contacts to icloud etc so I can upload to my new 4S?
Right now the original phone is "disabled" and it tells me I have to enter my 4 digit pin. It also says the only calls I can make are for assistance...
Once I have downloaded my contacts from original phone to icloud???...how do I sink my new 4 S.
Also, I have a new ipad and it has 3 G. I have lots of data in my ipone plan and don't need more. How do I "share" the data plan between my iphone and ipad? How do I keep the data backed up that is on both iphone and ipad.In Regards to this, You possibly wont be able to get the contacts from the iPhone 4 unless there is a back up file on your computer.
The original phone would be disabled due to alot of attempts of the wrong passcode. If all your contacts are on the cloud at the moment, you would be able to just set the iPhone 4S up with iCloud on it then Turn On "Contacts".
This would be bring all the contacts down from your iCloud onto your 4S.
But you will only be able to merge your contacts with the cloud when your original iPhone either has been enabled or the passcode was entered.
If you have previously already had iCloud on that device and have contacts Turned on, you will be able to just enter the same Apple ID you used for iCLoud on your original phone and use it on your new one.
Your able to check what content your iCloud holds via www.icloud.com
If you are unable to get past the disabled screen, then unfortunately the device will have to be put into recovery mode and then restored via iTunes NOTE: This will delete all data. -
accidently deleted an app Store app. how can I get the icon back on my home screen? in the app store it comes up 'open' instead of install.
What happens if you tap on open?
Remember, if you ever want to find an app quickly, you can slide all the way to the left (iOS 6 and lower) or pull down (iOS 7 and later) to get to an app.
If you know for certain that you have deleated the app, please try restarting your phone. There are many ways to do this, but the safest way would be to hold down the power button and then slide to power down.
Once powered down, restart and try to find the icon on your screen. If you still can't find it, go into the App Store and then find the app you were trying to access. It should have an iCloud download symbol since you've purchased it before, rather than saying "install." -
I bought a replacement iPhone 4 online because my old one broke about two months before my contract expires. I took it to Sprint to activate it, they reset the entire phone, activated, etc. I restored my phone from an iCloud backup (which I'd made right before going to Sprint), and now about half my apps have downloaded normally, while the other half say "Waiting" and can't be deleted (no X button). The strange thing is that if I go into the App Store and look at my purchased apps, the apps that say waiting can be opened and used by pressing the "Open" button there, so I know the app is downloaded and installed but the icons on the home screen are still greyed out and unusable. I've tried to reset my phone, restart my phone, redo the sync, and download the apps from iTunes, but nothing works. Any suggestions?
Tried that as well. The problem isn't that the apps aren't downloading, it's that the app icon is stuck on Waiting. I can actually open and use the apps from the App Store, but not from the home screen.
I'm adding photos to try help explain, though I'm not they'll show up well on since I'm on mobile.
THats the the home screen with useless icons
BUt if I search the App Store for one (like Buzzfeed)
IT it shows it being installed, and I can even open the app an use it. I would try to reinstall but I cant remove the apps. -
My daughter forgot her passcode. Phone is now disabled. I attempted restore procedures by placing phone in restore mode and connected it to the computer / itunes with which it was originally synced. itunes recognized phone in restore mode and said I must restore. I clicked restore, restore and update. Update began, itunes recognized the device by name and gave error message that stated I must have the passcode to restore. There was no option to restore as new. I attempted to restore the iphone 4s on another computer by instaling itunes, but same error messages appeared. I contacted Verizon and they said they could not help me. The nearest apple retail store is over 40 miles away. PLEASE HELP!
If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
If you have forgotten your Restrictions code, then follow the instructions
below but DO NOT restore any previous backup. If you do then you will
simply be restoring the old Restrictions code you have forgotten. This
same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake
and Home buttons at the same time. When the device turns off, release the Sleep/Wake
and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device.
The device should turn on. Note: If you see the screen pictured below, let the device
charge for at least ten minutes to ensure that the battery has some charge, and then
start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button.
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
When I set up email for the first time, I had to enter a 4 digit pin. Since then, every time I switch my phone on, I have to enter this pin. How do I remove or bypass the pin so that I can switch on the Iphone without having to first enter a pin?
Go to Settings>General>Passcode Lock>tap Turn Passcode Lock Off, enter your "pin".
Edit: Are you saying you are getting a prompt for your email pin, or are you talking about the passcode lock that appears when you turn the phone on? -
Hi, can anyone help...trying to sync I phone 4s with I tunes, it comes up with message to upgrade iTunes on phones to 11.1 but have no idea how to? Can anyone help with how I do this or any other way to get all music onto iPhone?? Thanks.
Yes, it will keep the music.
Close all open apps or programs. Open iTunes, look for Check for Updates in the menu and click on that. Then follow the prompts.
When the update is done. Open iTunes and in the menu look for show sidebar and click on that, then connect your iPhone to iTunes, click on your phone's name on the Sidebar, review all the tabs to make sure your sync option are what you want them to be (music, movies, photos, books, etc.) and after that click sync or apply and wait for the sync to finish. -
Lost my iphone and located it on the map, using the find a phone app. The second I had the location the phone went offline. Apparently, whoever has it knows how to disable the find a phone feature. Do I have any alternatives? Can AT&T or the police track the phone?
ATT won't unless they are asked to do so by the police and unless a major crime is involved, the police won't request this just for a stolen phone.
If the iPhone is running iOS 6, sounds like you didn't have the passcode lock feature enabled. Nothing prevents someone from powering the iPhone off and the same for removing the SIM card.
Maybe you are looking for
-
How to set the X-position and Y-position
I started an application but was struck due to a problem. The problem was : I was unable to set the X-position and Y-position in the desired place... Any one who can help please help me to continue my application...... I wanted to set my choice group
-
Hi , Can someone let me know the configurations required to pay this vendor through wire transfer. Can some bodsy tell the program name and form which is used for this purpose.Program i think is RFFOUS_T .what is the sapscript form which is used for
-
Work Context is stored in which XML file
Hi, we have created a workcontext from the weblogic admin console for our application. I just wanna know in which xml file/file's the work context related information is stored. Thanks in advance
-
Open powerpoint encrypted files that are read only
I'm trying to open a powerpoint encrypted file that is read only with keynote version 5.1.1. however keep getting the error message it must first be saved un encrypted. is there a way to mark the file read only so keynote will open it like powerpoint
-
Delivery creation/change triggers heuristic run
Hi all We use planning procedure '3' "Cover Dependent Requirements Immediately" for finished goods in our distribuition centers. In the event: "Create or Change a Sales Order", we have the action: "Start Product Heuristic Immediately" which leads to