How can PCI 6111E work its best?

My PCI-6111e board can work at 5M S/s.
However, when I use continuous acquisition, it can only work at 1M S/s.
My PC is K7 of 650M. What should I do to
make it work the highest sample rate?
Thanks a lot!
Caozi
China

"caozi" wrote:
>>My PCI-6111e board can work at 5M S/s.>However, when I use continuous acquisition,
it can only work at 1M S/s.>My PC is K7 of 650M. What should I do to>make
it work the highest sample rate?>Thanks a lot!>>Caozi>China
I have the same problem and interest in a solution. I am experimenting with
buffer sizes and task scheduling to see how fast and for how long a continuous
acquisition can work.
C. Eldridge

Similar Messages

  • How can I transfer work from one computer to another?

    How can I transfer work from one computer to another?

    Welcome to the forum.
    I can think of three basic ways to accomplish what you wish to do:
    Use the Project Archiver to archive your Project (and check the box to gather the media files), to an external HDD. Probably the easiest way to do it.
    Copy the Project and ALL media files to an external HDD, but be prepared to relink the media files to the Project, as the drive letter (part of the Absolute Path) will have changed.
    Edit loosely, and Share to an AV file, which will be Imported into a New Project on that second computer. Or, edit VERY tightly, and do the same. I like the first, as removing, replacing Transitions, etc., can be much more difficult, unless that "tight edit" is 100% done.
    Good luck,
    Hunt
    Message was edited by: Bill Hunt to correct formatting

  • How can two users work on iMovie?  My husband is working on a memorial video for a family member who passed, I plan to edit but he had to take his computer to work.  I have the iMovie project on a zip drive.  How do I get it to open in my imovie?

    How can two users work on iMovie?  My husband is working on a memorial video for a family member who passed, I plan to edit but he had to take his computer to work.  I have the iMovie project on a zip drive.  How do I get it to open in my imovie? 

    You will need an external drive that is formatted as MAC OS EXTENDED (journaled).
    Move the Project, Events, and any photos and music to the external drive by following the instructions in this post.
    https://discussions.apple.com/docs/DOC-4141
    Be sure to use CONSOLIDATE MEDIA to get the photos and music. Then plug this drive into your computer and you will be able to edit.

  • Firefox keeps crashing after the recent update. how can i fix this, its doing my head in.

    firefox keeps crashing after the recent update. how can i fix this, its doing my head in.

    Hello, Please make sure to get a fresh copy of Firefox from
    http://www.mozilla.org/en-US/firefox/all
    Have a nice day

  • How can I claris works filesto pages?

    how can I claris works filesto pages?

    Step 1 would be getting them into AppleWorks 6.
    Step 2 would be saving them from within AppleWorks 6.
    At that point, provided that these are Apple Works Word Processor documents, you will be able to open them with Pages.
    Steps 1 and 2 require a working copy of AppleWorks 6.2.4, 6.2.7 (not recommended) or 6.2.9, and a machine that is able to run it.
    Be aware that AW 6.2.9 is unable to open some ClarisWorks files.
    There are numerous threads dealing with tis issue. Check some of the others that are listed in the More Like This section to the right.
    Regards,
    Barry

  • I have LabView Student Edition, how can I make work a USB 6008?

    The Student edition it doesnot have many Vi's that there are necesary to work with a USB 6008, I would like to know how can I make work the Usb 6008 with LabView Student Edition

    Hello Jorge,
    When you say "NI-DAQmx configuration" do you mean the NI-DAQmx Base Configuration Utility?  Are you using NI-DAQmx or NI-DAQmx Base to communicate with the 6008?
    NI-DAQmx 7.5 added support for the USB-6008.  Therefore, you can use either NI-DAQmx or NI-DAQmx Base to control this device.  Make sure that you are setting the USB-6008 to NI-DAQmx before trying to use the NI-DAQmx VIs in LabVIEW.  To do this, Open Measurement and Automation Explorer (MAX) and select Tools >> NI-DAQmx Configuration >> NI-DAQmx USB Driver Selector.  Your USB-6008 should appear in this window, indicating which driver your device is configured for.  Make sure it is set to NI-DAQmx before trying to use the NI-DAQmx VIs.
    When your 6008 is set to NI-DAQmx, you cannot use NI-DAQmx Base or any of the DAQmx Base examples.  Likewise, when the 6008 is set to NI-DAQmx Base, you cannot use any NI-DAQmx VIs.
    If you would like to use NI-DAQmx with your USB-6008, please set the driver by following the steps above and verify that "USB-6008" is listed under "Devices and Interfaces >> NI-DAQmx Devices" in MAX.
    I hope this helps.  Please let me know if you continue having trouble with your USB-6008.
    Regards,
    Sean C.

  • TS1559 I stop receiving I message in my iPad recently I changed my apple password how can make it work again?

    I stop receiving I message in my iPad recently I changed my apple password how can make it work again?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
     Cheers, Tom

  • How to keep mac at its best condition

    My mac have been overheating quite easily and battery is running out quicker than before so im wondering if anyone can tell me how to keep my mac at its best condition. My mac is 2010 mid mac book pro

    Overheating, is it the 13" model?
    Is the fans racing even when your not doing much of anything?
    Do a SMC Reset if it's that
    Step by Step to fix your Mac
    I can't do anymore without some more detailed information, your Mac's model, the size etc.
    If you installed 10.7 that would explain a lot, what's your RAM?
    What programs did you install? Anti-virus? MacKeeper?

  • How can I tell if its a dead CPU or mobo?

    Hi,
    I am trying to fix a friend's dead (sort of) computer. He said the computer just stopped working and wouldn't restart. The "TCP" smell from the PSU suggested it had blown.
    I've put a new PSU in (Mercury 400W - 3.3V@28A,5V@40A,12V@17A) and the following happens: the computer starts, CPU and PSU fans run, DVD and DVD-RW lights DO NOT light up and will not eject, there is no sound of the HD spinning, there are no error bleeps, on the D Bracket 2 all four lights light up as steady red!
    The last suggests that its CPU - but surely I would get error bleeps too if there was a problem with the CPU??
    How can I be sure that it is just the CPU and no mobo damage - I don't have a spare socket 754 mobo or CPU to try.
    thanks in advance
    Cheers
    Grim_up_North
    AMD Athlon 64 3000+ 754 @ 1.8GHz
    1GB (512*2) 1xHynix & 1xM&S PC3200
    K8N Neo Platinum (MS-7030 Ver 1)
    ASUS GeForce FX5200 128Mb
    LiteON 16x DVD Dual Drive SOHW-1673S
    Fire Power 350W Power Supply (3.3V@20A,5V@40A,12V@15A)
    250Gb Maxtor Diamond Max 10 IDE

    Quote from: Grim_up_North on 08-June-06, 02:55:43
    Richard,
    No Jedi Mind Tricks or anything else needed - all the computer specs appear at the bottom of my original message - its a 7030 Ver 1.
    "P.S. Which two lights are Red?" - don't think I mention two red lights anywhere in my original message, there are four lights on the D Bracket 2 - ALL ARE RED!
    Cheers
    Grim_up_North
    Hi my friend!
    To check what part of the computer that is damaged and not working disconnect everything inside the computer, CPU, Memory, Graphic card any IDE drive etc.
    Now, make sure that the PSU is only conected to the motherboard and nothing else, also connect the power sw and power led.
    Now, power on the system, if the system is not powering on check the power sw, if its still not powering on then it's likley that the motherboard is damaged.
    If it is powering on the put in the graphiccard and try again, if an image is displayed saying somthing like processor or cpu missing, go ahead and install the processor with cooling and try again, if you still get this messege than you know its a problem ether with the processor or the socket, if you ain't getting processor error messege but memory error messege than you know that the processor is working some what well.
    Anyway, the only way to test the socket or processor is by putting it into another hardware...
    But this testing is at least some fingerpointing to the problem...
    Yours ChalkyGBG!

  • Just got a new mac - how can I keep working on my old iWeb site??

    Hi friends,
    I just migrated all my old data from an external hd onto my new MacBook. I see my website data, and I put it in the Sites folder, but opening iWeb prompts me to start a new website. How do I continue working on my website, i.e., open my old files in iWeb?
    Thanks!

    iWeb '08 stores your website data in a domain.sites2 file located in Home Folder/Library/Application Support/iWeb.
    You need to copy this to the same location on your new Mac and then double click the domain file to launch iWeb for the first time only. After that you can launch your site from the application.
    If you open a new site in iWeb first you can save the blank domain file in a new folder for starting new sites.

  • How can I start work on a separate page?

    I'm just moving over from excel and tried to find an answer to this but i couldn't, maybe its just too basic.
    In Numbrs, I have one page filled up with work and I want to start work on the next page. How do I start working in that page?
    Basically I would like to copy the work from the first page and paste it into the second.
    Thanks

    Terminology may help here:
    a Numbers document contains sheets.
    Sheets contain tables, graphs, graphic elements (lines, circles, text boxes, etc...)
    If the area your work requires exceeds one page (as shown when you enable print view using the menu item "View > Show Print View") then Numbers will add pages as necessary.
    Please post an image of your sheet if this does not address you question.
    Here is a discussion of posting images:  https://discussions.apple.com/message/16409342#16409342
    Regards,
    Wayne

  • How can Image sliding work in flash cs4 on mac using mx.controls.loader

    Hi i started working in flash after a long time. i am creating a virtual catalogue DVD for my client. to work on it quickly, i used mx.controls.loader component to call jpg images in my movie.i just gave contect path in component inspector. my working OS platform is windows xp. and everything is working perfectly fine. i used actionscripting on buttons to slide images left and right. when my client opened it in mac everything else was fine but images were not loading. although the directory path everything is right and working here but not in mac.

    Hi Mate - I'm using CS4 Extended Ps v11.0.2, according to the Adobe site photoshop instals a 32 bit version only. How can I find out exactly by checking out preferences etc? I'll have to go hunt out the box.
    Thanks for the reply.

  • Which applications are avaible with QMaster and how can I share work

    Hi, I' m new to Apple Qmaster, I think this application is very usefull, but I don' t know which applications Qmaster can be used with, can someone answear me?
    I would like also to know how can I use Qmaster in those applications to share work between Macs.
    Thank you in advance,
    Alberto
    PowerBook   Mac OS X (10.4.8)  

    1. The applications Qmaster will work with are listed on this page. If you need to work with another application, you might want to look at XGrid.
    (17941)

  • How can my MacBook recognize its serial number again?

    My MacBook (duo intel core) will not recognize its serail number.
    I had the logic board exchanged last year because the old one broke down. I learned just recently that the serial number was not reinstalled again, because I want to use automatic DHCP to get an IP in our new local network. There the MacBook is registered with its serial number. But it can't get the IP-address since it doesn't recognize its serial number. Instead the system profiler will show (language is german):
    Seriennummer: SystemSerialNumb
    How can I reinstall the serial number?

    Hi
    You can't, unfortunately - this should have been done at Apple.
    The network has no way to find out the serial number of attached computers, even if it did have one. More commonly, a machine's MAC address (ethernet or wireless ID) is used to identify it. You can find out this information through System Profiler.
    Matt

  • How can my ipad work in the caribbean if i dont want to use my current provider

    How can my ipad 4 work in the caribbean if i dont want to use my current UK provider.
    I am travelling to the Caribbean, will I be able to buy a sim card there to use over there for wifi.

    UK-sold iPads are not locked to a carrier, so you should be able to use your iPad with any carrier that offers compatible service and an iPad data plan.
    Regards.

Maybe you are looking for

  • Acrobat 9 and Canon iR-ADV C2030 issues

    I have a user running 10.7.5 on a 2ghz MacBook Pro who constantly has issues printing PDFs to various printers.  When she prints tabloid PDFs to our copier (Canon iR-ADV C2030), the prints come out fine.  When she prints tabloid PDFs to any of our ot

  • Multiple files in LSMW-BAPI method

    Hi, I am facing the following problem with the LSMW-BAPI method... I got around 20,000 record to be posted....and my LSMW-BAPI method is taking 4 hours to load them..so how can i reduce my time...??? is there any change of loading multiple same struc

  • Getting iPhoto to reread EXIF info - force rebuild of Library.iPhoto6 file?

    Hi all, I'm a new Mac & iPhoto 6 user. I imported some photos from my camera into iPhoto. Then I realized that the timestamps on the photos were wrong - I had forgotten to change the time zone when I travelled. Unfortunately, I couldn't find a way fo

  • CodeMeter or WIBU-KEY runtime system is not installed

    Hi, I've got a labview program named "application.exe" and when I launch it, the error "CodeMeter or WIBU-KEY runtime system is not installed" appears. I can launch Labview.exe, no problems... Labview version installed: 11.00 Program application.exe

  • Patch 7315332 - 10G Jdeveloper with OA Extension ARU for R12.1

    Hi, I would have a look at the JDeveloper with OA Extension ARU for R12.1 (cause we will upgrade to R12.1), just to see the features and try to open "old" projects created with the patch 6739235 (11i). Do you know where I can download a trial version