How can put on the front Panel the Bolean controll to activate stack plot2 mode?

In the properties of Waveform Chart there is the possibility to show all charts in one monitor or the Stack Mode Plot. Can I put a bolean Controll to use this stack plot in run time by Control Panel?
Thanks,
Vanny
Sweet, Beautiful and Young Female Physicist (SBYFP)
(I speak a not very good english, so If U are Italian LabVIEW expert speak in Italian, if U speak in Eglish... please speak easy )
My e-mail for personal contact: [email protected]_NO_SPAM_PLEASE

You can't change between stacked or overlay mode at runtime. You could use two different charts and make one or the other visible/invisible.

Similar Messages

How can i extend the table control while transfering the data

hi
how can i extend the table control while transfering the data.

Hi,
For table control we have to handle the page down (P+, or what ever function codes are assigned to that activity) activity with our coding.
Just check out this code:
This is the bdc to update the XK01 transaction code (Vendor Creation).
Here we will use table controls for bankings. Here Iam sending the coding and text files.
Coding
REPORT zprataptable2
NO STANDARD PAGE HEADING LINE-SIZE 255.
DATA : BEGIN OF itab OCCURS 0,
i1 TYPE i,
lifnr LIKE rf02k-lifnr,
bukrs LIKE rf02k-bukrs,
ekorg LIKE rf02k-ekorg,
ktokk LIKE rf02k-ktokk,
anred LIKE lfa1-anred,
name1 LIKE lfa1-name1,
sortl LIKE lfa1-sortl,
land1 LIKE lfa1-land1,
akont LIKE lfb1-akont,
fdgrv LIKE lfb1-fdgrv,
waers LIKE lfm1-waers,
END OF itab.
DATA : BEGIN OF jtab OCCURS 0,
j1 TYPE i,
banks LIKE lfbk-banks,
bankl LIKE lfbk-bankl,
bankn LIKE lfbk-bankn,
END OF jtab.
DATA : cnt(4) TYPE n.
DATA : fdt(20) TYPE c.
DATA : c TYPE i.
INCLUDE bdcrecx1.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\first1.txt'
filetype = 'DAT'
TABLES
data_tab = itab.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\second.txt'
filetype = 'DAT'
TABLES
data_tab = jtab.
LOOP AT itab.
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
itab-lifnr.
PERFORM bdc_field USING 'RF02K-BUKRS'
itab-bukrs.
PERFORM bdc_field USING 'RF02K-EKORG'
itab-ekorg.
PERFORM bdc_field USING 'RF02K-KTOKK'
itab-ktokk.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-LAND1'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFA1-ANRED'
itab-anred.
PERFORM bdc_field USING 'LFA1-NAME1'
itab-name1.
PERFORM bdc_field USING 'LFA1-SORTL'
itab-sortl.
PERFORM bdc_field USING 'LFA1-LAND1'
itab-land1.
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
cnt = 0.
LOOP AT jtab WHERE j1 = itab-i1.
cnt = cnt + 1.
CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-banks.
CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankl.
CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankn.
IF cnt = 5.
cnt = 0.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=P+'. " Page down activity
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(02)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
ENDIF.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-FDGRV'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB1-AKONT'
itab-akont.
PERFORM bdc_field USING 'LFB1-FDGRV'
itab-fdgrv.
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZTERM'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-MAHNA'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFM1-WAERS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFM1-WAERS'
itab-waers.
PERFORM bdc_dynpro USING 'SAPMF02K' '0320'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-LIFNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=YES'.
PERFORM bdc_transaction USING 'XK01'.
ENDLOOP.
PERFORM close_group.
**Flat files for the above code***
Intial screen data file.
1 63190 0001 0001 0001 mr bal188 b in 31000 a1 inr
2 63191 0001 0001 0001 mr bal189 b in 31000 a1 inr
Table control Data:
1 in sb 11000
1 in sb 12000
1 in sb 13000
1 in sb 14000
1 in sb 15000
1 in sb 16000
1 in sb 17000
1 in sb 18000
1 in sb 19000
1 in sb 20000
1 in sb 21000
1 in sb 22000
2 in sb 21000
2 in sb 22000
Regards,
Kumar.

I want to transfer my fcp to my new macbook.how can i unstall the current one and activate on the another. i just wonder i can't see any serial number on it!!

i want to transfer my fcp to my new macbook.how can i unstall the current one and activate on the another. i just wonder i can't see any serial number on it!!

Yes.
It's always useful to keep a backup copy as well in case things go wrong.
It's much quicker than having to download again.
You can keep it on hard drives, memory sticks or cards, DVDs etc.

How can I create multiple front panels for a single block diagram?

Hello,
I have developed a VI with multiple controls and indicators that needs to run on computers with screen resolutions ranging from 800x600 to 1680x1050. The problem I'm having is that the front panel does not properly scale for this range of resolutions by checking the options in the "VI properties" option. Is there a way to create multiple front panels of various sizes for my block diagram and programmatically select the appropriate front panel based on the screen resolution?
Solved!
Go to Solution.

See the attached Zip file.
I have two different front panels. Open either one and run it. They both call MainCode.vi which takes the references passed to it and register for events. From there, it does all the work of the code you would have put in your front panel .vi.
This way each front panel can be laid out however you want for each screen resolution.
Attachments:
MainCode.zip ‏22 KB

How can I unlock a front panel/block diagram in LabVIEW 7.1?

I inherited LabVIEW (7.1) code that when I try to edit, I am not allowed. I can access and used Functions and Controls, but I cannot connect or delete them back. The mouse indicator is a hand all the time. It does not change to cross hair or wiring tool.
In the Security section of VI properties "Unlocked(no password)" is selected.
How can I fix the problem?
Thanks for your help.

Sounds like you have got the automatic tool shutoff, go to menu and select window/ tools pallette and then turn back on the automatic tool. I think this is where it is located for 7.1.
Joe.
"NOTHING IS EVER EASY"

How can I Use the iCloud Control Panel to pick a new folder

I apparently moved or deleted my iCloud folder and keep getting this message Use the iCloud Control Panel to pick a new folder. How do I do this?

I have/had the same problem, just started this morning. I tried a system restore to a known good date. I still had the problem so I rolled restored the system to the latest.
Thinking that it might have something to do with priviliges, I reviewed my user account and noticed it was set to "Administrator". On a whim, I switched my user account from administrator to "standard user" and I'll be... the issue dissapeared. I have no idea why. But I thought I'd pass it along.

How can I use multiple front panel controls to be mirrors of each other?

Hi All:
I know this is going to be a strange question, but I have multiple inputs that control one output. This in itself not necessarily difficult, but I have a strange need. If one of the control inputs change I would like this to be indicated by the other controls. For example, I have a slider, numeric and dial controls on the front panel that control RPM. If the slider changes to 1000 RPM I would like the numeric and dial controls to see that change. Is this possible. If so, can you give me advice on doing this. I am using 7.1. Thanks for the help.
John Honnold

What you want is not that hard, but asked for a rather limited times.
Here's a how to:
Drop a slider
Right click Visible items-> Digital display
Right click on the slider Advanced-> Customize
Right click on the Digital display Replace select the control you want to replace it with (a gauge for instance)
Right click on the Gauge Visible items -> Digital Display
Now you have one control with three control options:
This was done in 8.2 but I think the same goes for 7.1
Ton
Message Edited by TonP on 04-06-2009 09:52 AM
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!
Attachments:
Example_VI.png ‏7 KB

How can i access remote front panel in RT with LabVIEW run time engine in client PC

Hi to all,
I have developed the RT application with cRIO 9075 integrated chassis. And i have access its remote front panel in client PC. Now i want to access the remote panel in the client PC without having LabVIEW runtime engine. If i connect the remote panel with that client, it shows only the vi border. i doesn't downloads the front panel.
How Can i access its remote front panel without LabVIEW runtime engine in the client PC?

You cannot view a remote front panel without the LabVIEW runtime - the LabVIEW runtime is what makes the remote front panel possible. What you will want to do instead is likely create a Web Service that you can access from a remote PC without requiring the LabVIEW runtime. However, this will require you to develop a web-based HTML or similar UI to interact with the VIs running on your system - NI hasn't yet created a way to export a LabVIEW front panel as an HTML'ish page.
-Danny

How can I enable my front panel audio??

the type of my mainboard is MS-6552,when I inserted my earphone and microphone into the jack of the box,I can hear nothing! then I opened the box,I found that the wire was not the proper place,there were 8 wires whick marked with “MIC IN,GND,LIN,LOUT,MIC IN,GND,RIN,ROUT”,I also found the F_AUDIO on the mainboard,there were 18 pin on it,I cannot matching them! who can help me?thanx

Look through you mobo's manual and you'll find it... Don't get stressed out too early... The first computer I built myself got me stuck in the same area for hours!!!
Btw, you've got to remove the jumpers on your mobo to enable front panel sound. Be warned that most mobo only allows you to us either front panel or back panel sound only. Please also ensure that there are no stand offs underneath your mobo.
All the Best... :D!!!

How can labview update the string control (text-edit box) after we have pressed the carriage return key on the keyboard during text-editing within that box?

Dear readers,
I have been trying to work out how to get labview to detect the event when a 'string' control has been modified, where the user has finished editing the string either by 1) pressing the enter key on the keyboard, or by 2) taking the focus away from the string control again. For example.. if I use the mouse to click on the string control and then I type 1234 into the box, I would like to have a routine that does something once the user hits the Enter key of the keyboard, or when the user takes the focus away from the string control again by clicking on something else. I would like the routine to respond even when the user didn't change anything in the text box (such as when we mouse-click on the edit box to go into edit mode, and then mouse-click on something else to remove the focus with no changes to the contents in edit-box).
The purpose of my routine is to have a edit-box for a user to change for example the centre-frequency of a vector network analyser, so that the centre-frequency of the network analyser can change once the user finishes entering a new value in the text-edit box by hitting Enter key after the number is keyed in. Even if the user has clicked on the edit box, but changes their mind by mouse-clicking on something else to remove focus from the edit box, I would still like labview to detect the event when the control loses focus, so that the centre frequency can be updated anyway (to the same value that was already in the edit box).
So far, I've tried set the string control option to 'limit to single line', so that I can try to scan for a carriage return .. '\n' ... pattern in the string. Unfortunately this doesn't work because labview doesn't seem to attach the '\n' to the end of that single line.
Could someone please suggest ways to set a flag when a user hits Enter during text-edit mode of a string control, or when focus has been removed from the string control?
While I've only described my problem for controlling a single control parameter on the gpib device, I'd like to make this feature work so that I can do the same kind of thing with other control parameters as well.
Thanks so much in advance.
Kenny

Hi Kenny,
instead of using the event structure, you can directly achieve to what you want by the KeyFocus property of the string control.
- Enable Limit to single line option
- Create the property KeyFocus in read mode and connect an indicator
Each time you click on the string to modify it KeyFocus is True; when you click away or hit Enter KeyFocus is False.
You can toggle your settings when KeyFocus changes from True to False.
Alberto

How can I deactivate the button control?

By mistake I´have activate the button control in my iphone and now I can´t even unlock it . I don't know how to deactivate it .

You are going to have to explain what is happening when you try to unlock your phone. I do not understand what you mean by "button control".

How can I fix the remote control order of the chapters?

I am using the new 6.0 theme of Reflection Black--submenu Chapters. THis gives you two rows of chapters (which shows the looping movies and title of the chapter). I am importing the .mov slideshows in the order I want them accessed with the remote control of the TV (or DVD Player remote), but this is not the case. Instead, when clicking the right arrow on the remote control, the next chapter is not the one laid down in order, but another chapter. (From the first chapter, it skips to the second row, then back to first row, then back to second row.) Basically, the remote does not forward to the next chapter in the order they were imported.
Can anyone help? I have been told by Applecare that the map icons cannot be reordered. But starting a new iDVD project and importing in order does not work. I tried other themes and the ones with lists work and can even reorganize the order for you if you drag and change the position of the chapter!
Thanks

There seems to be some order in some themes, but this particular one has no order. Hoping also to hear of a solution. Applecare said to reinstall iDVD if I can't fix the problem with creating a new project, but I don't think this is the issue, since other themes work.

When I try to activate Java plug in it keeps failing when I try to activate it. How can I get the Java plugin to activate on FireFox.Java has been updated.

I tried activating the plugin at osgov.com/webcam.html to see the web cam. I keep getting an error message that the plug in failed when i try to activate it when I am on firefox.

Hello T.B., if you already [https://support.mozilla.org/en-US/kb/how-to-use-java-if-its-been-blocked#w_activate-java-once Activate Java once], try to reload the page and check it again. If does't work try to [https://support.mozilla.org/en-US/kb/how-to-use-java-if-its-been-blocked#w_always-activate-java-for-a-site Always activate Java for a site]
Java 7.11 is vulnerable, so use it, it if absolutely necessary.
thank you

How can I get the table control up arrow or down arrow SCROLL OK_CODE?

Dear All,
I want get the table control up or down Scroll OK_CODE (not button, is arrow click), But I debugged have not found when I click the up or down scroll.
Please give me some help.
Thanks

Hi Sun,
PBO..
                           Loop with control T1.
                   module get_Looplines.
                Endloop.
                    Module get_looplines.
                      Looplines = sy-loopc.      "<< by using this you can get the scroll bar...
                    Endmodule.
if you wan the ok_code for scroll bar in table control...
the ok_code is not generated for scroll bar..
but if you do not clear the ok_code in PBO it will carries the ok_code when ever you press scroll bar up and down...same ok_code is repeated..
Regards,
Prabhudas

How can I get the remote control button to appear in itunes?

I cant seem to locate the remote control button that is supposed to appear in iTunes. I do not have any remote controls associated with my iTunes yet the button is not appearing. Help.

Download the Adobe Flash Player installer directly by right clicking the following link and selecting "Save Link as".
Flash Player Plug-in (All other browsers)
THAT's the Flash Player.
Shockwave Player 12
THAT's the Shockwave plugin.
BOTH should be up to date.

How can put on the front Panel the Bolean controll to activate stack plot2 mode?

Similar Messages

Maybe you are looking for