How can remove OVi store widget after update to Be...

Hi! Everyone.
I'm using Nokia N8.
Any one can help me remove OVi Store widget version 2.12.040 and Ovi version 1,0,21129 on my device?
I was hear and I knew "Ovi" brand has replace entirely by "Nokia" brand.
After update Belle official success, I couldn't find Ovistore widget on my device (Nokia N8) but in section "Already installed" it's still there.
Some time I was try remove them, but my device always notice " Cancelled remove".
I don't understand OVi Store widget version 2.12.040 and Ovi version 1,0,21129 has useful what on my device? Because, on Belle, we can not use OVi Store widget version 2.12.040 and Ovi version 1,0,21129.
Any one have some solutions or give to me some ways for this problem.
Thank you.

I have the same issue and have come to the conclusion that its much better to live a peaceful life without the ovi store then to be worried about it and start hating your gorgeous e7 even more all the ovi apps are available over the internet you can download them from some other website .... unfortunately till nokia doesnt do another anna update this trouble will not be solved.... people will tell you to get your phone flashed from ncc but i think thats pathetic that you pay this much money and keep running to ncc to fkash your phone after every update, so just relax and enjoy the standard stuff and hoppe that nokia makes some magical anna update which cures it all
Join my movement to bring a change in NOKIA for good by supporting my FORUM
http://discussions.europe.nokia.com/t5/Eseries-and-Communicators/NOKIA-MODERATORS-ONLY/td-p/1318965

Similar Messages

How can i recover my voicemails after updating my iPhone?

How can i recover my voicemails after updating my iPhone?

When one restores an iPhone from its own backup, visual voicemail is also restored. However, when one restores a new iPhone from a backup from a previous phone, the voicemails fail to restore. This occurred between my 3G to 4s, and again from the 4s to a 5s. Restoring the 4s once from its own backup resulted in voicemail recovery.
My only explanation is that when a different SIM card is used, voicemails cannot restore as one would otherwise expect. Perhaps voicemails are inexplicably tied to their SIMs. Unfortunately, newer models of iPhones tend to use exceedingly different sizes, rendering one possible fix unpursuable. iBackupBot is the other possible solution: you can extract the voicemails from the backup and restore them onto the new iPhone individually.

N8: How to restore music store widget after hard r...

Hi
I lost all nokia N8 widgets including Music store after I hard reset my N8.
I have really been searching but have been unable to find a work around for this. I am unable to play any OVI music on my phone as it searched for a license and ends up saying that this is not my registered device.
I really need some help.
Nokia care has failed to solve my problewm so far.
HELP!
MODERATOR'S NOTE: We have edited your post. Please refrain from posting irrelevant characters. Posting with a brief and concise concern would be enough to gather solution.

I have been able to restore everything....except the Ovi Music Widget after a hardreset.
This might help -
http://www.nokian8blog.info/2011/06/how-to-restore-ovi-music-unlimited.html

How can I retrieve video podcasts after updating to new iTunes?

Anyone lose their video podcasts after updating to new iTunes? My audio podcasts are fine but all my video is gone
<Re-Titled By Host>

I lost almost all of my podcasts as well! This was a bad upgrade!

How can I configure Snow ABS after updating firmware to 5.7?

I have a 3 Mac network (G5 w/Tiger,vers A iMac and Wallstreet PB w/ Panther) connected by Snow ABS extreme that's been running perfectly for a couple of years. I updated the firmware on the ABS to 5.7 in efforts to have a configuration my Treo 650 with Enfora WiFi adaptor could join (it's 802.11b only and Enfora suggested updating the firmware and selecting b/g option). After the firmware update, Airport Admin Utility doesn't see the ABS unless I connect it to the G5 running AAU by ethernet (don't know if it's a crossover but I read on the forum it now doesn't matter). Trouble is when I then give my password, try to configure I get "The Airport Admin Utility was unable to read the configuration on the selected base station...an error occured while reading the configuation". I've tried updating the FW again, soft and hard resets, made sure I have the latest AirPort (4.2.1)and nothing helps. I pulled out my original snow ABS (not extreme) and my DSL and whole network function like before. I like the extreme since I can use my Airport Express to print for everybody and it then completes my coverage much better. Any help would be greatly appreciated.
LittleJohn
G5 Mac OS X (10.4.6) iMac vers A, Wallstreet PB (both 10,3,9)

There is no reason to be running beta software, I doubt it will even still run as iOS 6 has been officially released. Or were you simply trying to be funny?
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

After updating osx 10.9.2, I cannot type without curser leaving my field and making beeping noises. How can I fix this? After updating osx 10.9.2, I cannot type without curser leaving my field and making beeping noises. How can I fix this?

I did the update and now my curser seems to leave my typing field and makes a beeping sound. I then have to place my curser back to type some more. I can no longer work in my excel spreadsheet because of this. Is there a fix that I can install? Please help! I also have to double click everything

If it's slow on startup it would be extensions loading or LaunchDaemons starting up.
You should have a look in:
/Library/LaunchDaemons
/Library/Extensions
You can count out anything in your home folder and it shouldn't put anything in /System as that's reserved for Apple.

How can I create a new recovery key if you automatically removed my trusted device after update do iOS 8?

How can I create a new recovery key if you automatically removed my trusted device after update do iOS 8?

Hey -
I need to do the EXACT same thing, but have no idea how. Has anyone out there done this?
My situation is a tad different..this is a new Mac (and I'm a brand new Mac user). Tons of querks occur under my original account (videos won't run, Safari won't support certain plug-ins). I spent 6 hours on the phone w/ 4 different Apple Reps and nobody could fix it. A rep finally looked at my MacBook Pro in person today. He created a new account just to see if that would work and under that new account, everything works perfectly fine (no querks, can view video). He tried switching a million settings in my original account to no avail.
He said to create a new account (as he did) and move my files over to the new account and then go back to the original and delete it. How do you do this?! I can't figure it out! I've got a new account created, but of course it just has the default folders in it w/ the little red icons next to them! Thanks in advance!

Hi, I have a macbook air os x 10.9.5 and I have problems with the app store. It doesn't open anyway. so, how can I install it again or update. I have problems with preview too, the same, doesn't open the application

Hi, I have a macbook air os x 10.9.5 and I have problems with the app store. It doesn't open anyway. so, how can I install it again or update. I have problems with preview too, the same, doesn't open the application

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

I have 0,3€ credits. How can remove them so that I can change to the app store of another country?

I have 0,3€ credits. How can remove them so that I can change to the app store of another country? I need to change to the Chinese app store as the apps I am looking for can be only found there. Thanks for all answer in advance!

Click here and ask the iTunes Store staff to zero your account balance. Note that if you're not in China, you won't be able to use the Chinese App Store.
(125951)

If I can't download an update for an App Store purchase because I don't have OS X 7, how can I get rid of the update reminder?

If I can't download an update for an App Store purchase because I don't have OS X 7, how can I get rid of the update reminder?

http://www.apple.com/support/mac/app-store/contact.html?form=account

How I can closed all open application after update to iOS 7.0.2.0?? Before this v iOS7 we was can closed any application's open :(

How I can closed all open application after update to iOS 7.0.2.0?? Before this v iOS7 we was can closed any application's open :(

There's no good way to do it. But you don't need to. iOS 7 automatically handles whether an application takes up memory or has files open. There's no real advantage to you ever closing an application yourself.
If you are having problems with a particular app, please describe them.

HT1925 When I try to uninstall apple updater I get a message that says " The feature you are trying to use is on a network resource that is unavailable." I dont understand this. How can I finish uninstalling the apple update program?

When I try to uninstall apple updater I get a message that says " The feature you are trying to use is on a network resource that is unavailable." I dont understand this. How can I finish uninstalling the apple update program?

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
http://www.apple.com/itunes/download/
Does it go through properly this time?

How can I tell this FM to update the buffer before reading data??

Hi All,
I have developed a Web Dynpro Application that calls a FM.
Values are written into the database (I use a standard FM for that).
After that, values a read from the database to be show in the Web Dynpro Application again (Again, using a standard FM).
However, the data is not being updated, that is, the data delivered by the function module is not the updated, new data, but the old data.
If I select the data using simple select statements, ist is provided correctly (new data). That means the database already has the correct data, but the FM uses some sort of buffer which does not seem to be up to date at this point in time...
How can I tell the FM to update is buffers before being acually executed?
The function module in question is called HRIQ_ACAD_READ_TIMELIMITS, but I don't think this information is required to answer my question.
THANKS, Johannes

aye, thats ecaxtly what i meant.
Displaying the data in a new process. i know this is not what you finally want, but if the data is correct in your new process we might get better ideas what is causing your buffer problems.
BTW is your system scaled? do you have more than one application server and may this be a synchronisation error?

How can I prevent any use to update Purchase order if status was "Approval"

I have some users can update any purchasing order update after "Approval"
Please I would any Purchasing oracle module expert to Assist me to get way to solve problem.
How can I prevent any use to update Purchase order if status was "Approval"?
Further Information :
Oracle Allpication Release : 11.5.9
Oracle Purchasing Module.
Oracle Data Base: 11i
Khaled,

Try writing a personalization on the PO screen that adds the following condition to the where clause
"and authorization_status !='APPROVED'
However, I will be careful with a blanket restriction like this. There are situations when you need to modify an existing PO. So you should code some exceptions for this rule.
Hope this helps,
Sandeep Gandhi

How can i add an Engraving after i order the ipad ( add, not edit)

how can i add an Engraving after i order the ipad ( add, not edit)

Sorry, I don't mean to appear rude, but I don't understand the question. What do you mean "how do you call"? You pick up the telphone and call the store's number, just as you would any other person or company.
None of the Apple Stores have on-line chat.
Regards.

How can remove OVi store widget after update to Be...

Similar Messages

Maybe you are looking for