How can routes be split in garmin base camp?

I battle to break down a complex route that i created on mac book pro 10.6.8 in garmin base camp.
Does anyone know how to do it or is it impossible?

As it's non-Apple software, you'll need to ask Garmin.

Similar Messages

I bought a macBook Air, all my devices were synchronized on a old PC. How can my MAC be the main basis for my devices?

I bought a macBook Air, all my devices were synchronized on a old PC. How can my MAC be the main basis for my devices?

Hi Sodam,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
iTunes Store: About authorization and deauthorization
http://support.apple.com/kb/HT1420
Cheers,
- Judy

How can I install windows XP with Boot Camp 4.0.4 in Mac OS X 10.7.5?

How can I install windows XP with Boot Camp 4.0.4 in Mac OS X 10.7.5?

You can't. Only Windows 7 is supported in that configuration.

How can I display & split the audio & video from the same digitized clip?

I digitized a scene into iMovie that I edited on a professional system which I don't have access to anymore. The whole scene is 1 clip. Now I see a few tweaks that I want to make, so I was hoping to do them in iMovie.
I want to "pull up" the audio in one section - meaning I want to take cut about 20 frames of audio from the end of a shot, and then move all the other audio up to fill the hole. To compensate for the missing 20 frames, I'll cut video off the head of the next shot. Some call this prelapping. Some call it an L-cut. Some call it asymmetrical trimming. Either way, I can't figure out how to do it in iMovie.
My clip appears in the timeline as one track - a single track that contains the video and 2 audio tracks. How can I display the audio that's tied to the video on its own track? Then I think I could split audio & video wherever I wanted and trim things up - but I can't figure out how to do it.
Am I asking too much of this software?
BTW, I never see the option to "Split audio clip at playhead". I'm not displaying clip volume or waveforms. Choosing to display waveforms doesn't show me anything. Maybe iMovie thinks I'd only want to see waveforms of audio that isn't tied to my video-and-audio clips?
Thanks in advance for any help...

Jordon,
"Am I asking too much of this software?"
No, you're not.
You first want to select your clip(s) and choose Advanced>Extract Audio.
This will copy the audio from the video clip and place it on one of the two separate audio tracks while lowering the audio level to zero in the original video track.
You can now edit and move the audio independently of the video.
With the audio clip selected, you'll find you now have access to Edit>Split Selected Audio Clip at Playhead.
Matt

ITunes has split up my albums; how can I un-split them?

I have iTunes 10.2.2.12 on my Windows 7 64 computer. I have several albums that iTunes has split up and I want them back together, so that when I sync to my iPhone they show up as one. The splits occur whenever either an Artist or Composer changes. For example, the Air & Ground CD from the Los Angeles Guitar Quartet shows up as two albums because one track is credited with a soloist instead of the ensemble. The ensemble tracks show up on one Album on the iPhone and the solo track as a separate Album. I "fixed" this one by just editing the Artist field, but that's not a satisfactory solution, especially for Albums with a multitude of composers. How can I get the splits un-split?

Now I see the answer: https://discussions.apple.com/message/11496529#11496529.

How Can I change a report with base in another in the same dashboard?

Hi,
I need to publish two reports in a dashboard, the first report is a list of values and the second report is a chart. When I click in a value of the first report, the second report must change with the value selected from the first report.
I first created the first report, and I changed the column properties in the data format, I selected treat text as: "Custom Text Format", the Custom Text Format is:
@[html]"<f ont class=Nav oncl ick=\"Ja vaScr ipt:GoNav(event, '/path/reporte2','TABLE','FIELD','"@"');\">"@"< /fo nt>";;@
The second Report has the next filter: FIELD is equal to / is in @{NQ_SESSION.@}
With this the first and second reports works well, however, when I include the two reports in dashboard, the second report is updated in another window not in the same section.
How Can I change the second report in the same page or section where this the first report?
Thanks
Edwin Guerrero

I am not sure whether this would work but worth a try. Create a third report which would call the 2nd report using iframe and GO URL. Name the iframe of the narrative view. And use the java script to update the iframe using objWin = window.open(<ur go url>, “biee”,”height=480,width=240,scrollbars=yes,resizeable=yes”);. I had used a similar method to integrate biee with mapviewer. You can check it out here http://oraclebizint.wordpress.com/2007/09/26/oracle-bi-ee-10133-and-mapviewer-step-by-step-integration-phase2-and-phase3/
Thanks,
Venkat
http://oraclebizint.wordpress.com

How can I install Windows 7 through Boot camp?

I have a MacBook Pro Mid 2009 and I am running OSX Mavericks. How can I install Windows 7 from the install DVD? Thank you for the help in advance. Just as a side note, if I want to run GTA 4 on Windows 7 through Boot Camp, will it be faster than it is on Parallels? Thanks again.

Games work much better in Boot Camp. Note that a virtual machine does not use all the performance of your MacBook, so they may work worse than in Boot Camp.
Your Mac supports a 64-bit Windows 7 version, so open Boot Camp Assistant (in /Applications/Utilities), tick the options to download the Windows support software and install Windows, and follow its steps. Apple has got all the steps you need to install Windows > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
Remember to install the Windows support software after installing Windows

How can I use split extrusion on 3 different 3d objects on 3 different layers?

I saw someone use split extrusion on text so that each character can be modeled independently, but how do you do it with 3 different objects so I can have them rotate independently?
Thank you,

Hi,
Split Extrusions only works for a Ps generated extrusion which by definition is generated on a single 3D layer. You can generate a multi-object extrusion, by merging shapes before extruding, or by extruding a multi-part selection. There's no need to separate the 3 split ojbects to separate layers, unless you don't want them rendering as a set.
Quick example:
1) CIrcle marquee select 3 times on the canvas with the shift key held down.
2) 3D extrusion from current selection
3) make sure to select the extrusion mesh in the Scene panel and 3D> Split Extrusion
4) move each separate extrusion independently
Here's an example using rectangle shapes.
regards,
steve

How can I Migrate/Split itunes/icloud account for a large family now that they have family sharing

Ok, now that Apple has finally come out with family sharing I need to get things sorted out and I think it is going to be a mess. I have 6 family members (my spouse and 4 children) all sharing/using one itunes account. For parental reasons this made perfect sense. Now with the the advent of family sharing and such we have alot of sorting and migrating to do and I am very unsure how to go about it. Here is what we have.
Myself - I have a 64GB iPad 3 and a 64GB iPhone 5
Spouse - 64GB iPhone 5
Children - x4 16GB iPhone 5C (pink, blue, green, and a yellow)
We have had one itunes account now for several years, we used to have x4 16GB iphone 4's and a 16GB iPod touch 4 so we needed it to be shared at the time. We all have different Game Center ID's and Facetime/iMessages are all setup to the phone numbers (aside from mine which also uses the itunes e-mail). We currently have 1 upgraded icloud account with 200GB of storage on it (love the new tiers). So here are the questions.
1) How do I go about using and isolating all the devices so they can all use the iCloud storage? Right now if I try and setup backups by device under the what to backup there is no simple "Full Backup" option, they have all the categories separated. I cannot backup my daughters contacts without forcing a merging of them and so on. Same thing with Documents and Data. Would I need to setup a different iCloud account for each device now?
2) iTunes Music/App purchases. Now that they have a family sharing function I am assuming it would be a good time to separate all the devices (aside from my personal iPad/iPhone). If I understand correctly we need to setup a new itunes account for each and link them with family sharing, does this then allow us to disperse/move items from a singular to the multiple account (at least a one time option to move around) or would it simply be shared off the original account? My daughter for example will be 18 next summer and as such no longer under our care. How do we move her items to her account? She has a lot of purchased Music. Now keep in mind I am talking about an account for someone who was 12 when she had her first device and as such needed to be under her parents.
I just want to state that repurchasing things is NOT an option, and to be frank, according to Canadian laws pertaining to *licensing* we actually own the product if we paid for it and have the right to transfer the ownership thereof. This issue went through the courts regarding used copies of OEM editions of Microsoft Windows several years ago and they closed the legal *license* vs ownership separation.

Go to appleid.apple.com to manage the ID, sign in and select to the Name, ID and Email Addresses section, then change the birth date on the bottom right. At the present time you may not be able to enter the correct birth date, but others have had success changing the year to 2000, or the date to 1/1/2001, both of which will have child ID status.

How can I insert images in data base?

Hi!!
I don't know what i need to do.
My problem is that I need to save images in the data base but I don't know how. The images are from autopart catalogues.
Thanks for your help

Hi,
Here is the example which uses dbms_lob utility to insert an image into the database.
Create a table to store the blobs:
create table blobs
( id varchar2(255),
blob_col blob
Step 2.
Create a logical directory in the database to the physical file system:
create or replace directory MY_FILES as 'c:\images';
Step 3.
Create a procedure to load the blobs from the file system using the logical
directory. The gif "aria.gif" must exist in c:\images.
create or replace procedure insert_img as
f_lob bfile;
b_lob blob;
begin
insert into blobs values ( 'MyGif', empty_blob() )
return blob_col into b_lob;
f_lob := bfilename( 'MY_FILES', 'aria.gif' );
dbms_lob.fileopen(f_lob, dbms_lob.file_readonly);
dbms_lob.loadfromfile( b_lob, f_lob, dbms_lob.getlength(f_lob) );
dbms_lob.fileclose(f_lob);
commit;
end;
Regards
Anand
null

How can i reset my air port base station deleting all back to new

Hello All...
I'm desprate to get back control of my computer.... Everytime I go to an apple store they look at me like I'm crazy and not once have taken the time to resolve the problem. I have been dealing with what I think a hi jacked computer for going on a year now. My research has lead me to someone obtaining access to my computer o matter what I try. I have had it reset to factory setting way to many time due to thats all these kids at the apple store, great its free but never have they tried to take iniative and see why the problem consist over and over. Someone is obvisously harassing me costing me now almost 1500 trying to fix it. Its not that I have any sensitive information or like I'm in law inforcement, its now become personal. I went to the cops once in LA but they luaghed and told me to talk to the FBI, yeh right. You would not realize how hard it is to find a compuerter tech that or what I would call a master. I would pay top dollar to locate this enity for a few reasons. One peace of mind and two grasping what they are doing to get into my computer at there conveince.
Symtems: it appears new firmware has infatrated my opperating system changing admin rights, new files that have nothing in them, new programs I have never seen. Iy appears what ever I do is copied into files and sent to a 3rd party.
-there appears to be multible access points into this computer, modified bluetooth, severl USB channels, infared conection, eathernet, fire wire connections with mac address I dont reconize. there seems to be a new code in my computer that does not allow me to load anti virus in its full integrity. my phone logs to seem to be recorded on my computer. I have tried everything. I need help to see what is the issue, reward available
BlueTooth:
Apple Bluetooth Software Version:          4.2.0f6 12982
LMP Subversion: 0x2283
Services:
Bluetooth File Transfer:
Folder other devices can browse: ~/Public
When receiving items: Prompt for each file
State: Disabled
Bluetooth File Exchange:
Folder for accepted items: ~/Downloads
When other items are accepted: Ask
When receiving items: Prompt for each file
State: Disabled
Bluetooth Internet Sharing:
State: Disabled
Incoming Serial Ports:
Bluetooth-Serial-2:
RFCOMM Channel: 3
Requires Authentication: No
Bluetooth-Serial-1:
RFCOMM Channel: 1
Requires Authentication: No
Outgoing Serial Ports:
Bluetooth-Modem:
Address:
RFCOMM Channel: 0
Requires Authentication: No
Header 1
Header 2
Hardware Settings:
Address:          20-C9-D0-BD-78-AE
Manufacturer:          Broadcom
Chipset:          Unknown (ffff)
Firmware Version:          v131 c5492
Bluetooth Power:          Off
Discoverable:          Off
Auto Seek Keyboard:          Off
Auto Seek Pointing:          Off
Remote wake:          Off
Vendor ID:          0x05AC
Product ID:          0x821D
HCI Version:          0x6
HCI Revision:          0x1574
LMP Version:          0x6
LMP Subversion:          0x2283
Services:
Bluetooth File Transfer:
Folder other devices can browse:          ~/Public
When receiving items:          Prompt for each file
State:          Disabled
Bluetooth File Exchange:
Folder for accepted items:          ~/Downloads
When other items are accepted:          Ask
When receiving items:          Prompt for each file
State:          Disabled
Bluetooth Internet Sharing:
State:          Disabled
Incoming Serial Ports:
Bluetooth-Serial-2:
RFCOMM Channel:          3
Requires Authentication:          No
Bluetooth-Serial-1:
RFCOMM Channel:          1
Requires Authentication:          No
Outgoing Serial Ports:
Bluetooth-Modem:
Address:
RFCOMM Channel:          0
Requires Authentication:          No

THis is 100% true.
It is happening to me, my home and now my office. Every computer every tablet and my iPhone 4s.
I have studied it thoroughly. Works something like this. They use a BT stack and telephony while they are roaming and they release an incredibly smart and incredibly small package.
It is a variation of ransomeware. It starts by using bt exploits by chainfiring BT drivers and commands from the new dual and quad core android phones. The package that they install on your iPhone, iPad, all tablets as well as Pc and iOS computers starts by disassembling your applications, opening ports and installs VPN. Once they have the VPN it is all over. All of this happens in seconds.
It is scary stuff. Starteed with my iPhone then it uses your phone, tablet etc as a hub and spreads to your other devices. Once u get it it is impossible to get rid of. You need to stop everything go to someone else's house or area on their device and change all your passwords and then start wiping everything 100% format and reinstall with no wireless within range.
Sounds completely crazy but it almost shut my business down and you can call geek squad or any tech and they will think u are crazy. I am in Orange County Ca and I wonder if it is just local because you are the 1st person I have seen with the exact same problem. Once in my PC at my office it jumped to everyone through LAN or BT. I have copies of the original package that was installed with instructions on how to deploy it how to use it.
Nobody will even take you serious when you explain it to them.
Symptoms are your computer is running slow, finding new folders and locked out of your own folders or programs. You then think ok just a virus so you scan but nothing detects it because it encrypts everything it does. I have tried every single virus and malware scanner out there and uses simple scripts to do its job. But as it grows it starts modifying your complete system.
IT is very very dangerous because it is undetectable by any type of virus scanner and once you are VPN locked everything they do looks like it is coming from you. I can scan my LAN and there will be anywhere from 6-10 people using anyone of my devices. I have just given up trying to fight it. It is very personal here as well but cannot stop it. Everything has been wiped but it made a hidden drive/partition on my laptop that starts the process all over again.
You won't get an ip just MAC addresses. It is definitely something new and a new type of bug that no one has seen before. One of the things it did was modify AVG to run endless loops far above what the CPU could handle on my wife's computer and we could not stop any of the processes or shut it down, had to physically take the battery out and unplug it because the laptop got soo hot it was literally burning up. It gets even stranger so I am not going to go on about it and loose all credibility.
It is definitely something you do not want to get but there is some info on the FBI cyber attack website. I think the basic idea is to scramble all of the info and ransom the solution key back to you.

How can I evenly split incoming calls between 2 employees without a shared voicemail?

I need to load balance a low volume of calls between 2 DNs.
Incoming calls need to be evenly split between Employee1 and Employee2. If they don’t answer the call, it needs to go to their personal voicemail, not a common voicemail account.
I think the Hunt pilot and line group is what I want, and I can utilize a circular distribution, but my only hurdle is voicemail. I can get voicemail to go to a single account, but I need a method to simply split incoming calls to 2 employees, and (if no answer), drop into their personal voicemail.
I cannot figure this out, any suggestions?
I’m running CUCM 9.02, Unity Connection 9.02, and UCCX v10 (I mention UCCX as a tool I could leverage, Employee1 and Employee2 are not agents or part of a call center)
Thanks for any assistance.

Queuing is not enabled. I have no desire to queue the calls.
In the Hunt Pilot settings:
When I chose “Do Not Forward Unanswered Calls”, calls drop after (what appears to be) the Line Group’s RNA Reversion Timeout is met. Never goes to voicemail.
The same when I select “Use Forward Settings of Line Group Member”.
If I select “Forward Unanswered Calls to” and manually select my VM pilot DN, missed calls finally go to Unity Connection, but not to any voicemail account. If I add the Hunt Pilot number as an alternate extension to Employee1’s unity account, then all unanswered calls will drop into Employee1’s personal account, even the calls missed by Employee2. This is not the desired solution. I need Employee2 ‘s voicemail account to answer the calls missed by Employee2 as well as Employee1’s voicemail account to answer the calls missed by Employee1.
This brings me back to my original question. Is there a way to get this to work with Hunt pilots and line groups, or should I be trying something else? I just need calls to DN:111 split 50/50 between 2 DNs (DN for Employee1, and DN for Employee2), and have missed calls drop into the personal voicemail of the DN that missed the call.
I’m hoping someone who has gotten this to work can share their Hunt Pilot and Line Group settings.
Thanks again.

How can I install windows 7 using boot camp, if the partition will not format correctly?

Hi All,
I'm new to this forum and have had a chance to look around a little bit, but haven't really found an answer to the problem that I'm having.
I have an imac and I'm attempting to use boot camp. I have used it in the past, with prior versions of mac os x, but this is the first time that I have tried it with 10.6.8. The first thing I found out is that I can't use Windows XP, even with service pack 2 installed, because it doesn't find the "boot camp" partition. So, I recently obtained a full retail copy of Windows 7 and have been trying to install it. I have no problem with the boot camp assistant creating the new partition, 200 GB. However, when I insert the Windows 7 DVD and the computer restarts in the Win 7 install screen it tells me that I cannot install Windows on the selected partition (which I expected to see.) So I choose "format" the further format the partition. It doesn't ask me how I would like to partition this, but just seems to start. All seems to go fine until it finishes and i see the same message of "Windows cannot be installed in the selected partition." I can click on the format tab endlessly but it still doesn't seem to work. Does anyone have any ideas? I've called Apple and their technicians keep telling me that I need to reinstall the Mac OS again, which I've tried. It doesn't seem to help either.
Thanks in advance for your help,
DTK

David Kaff wrote:
Yes, I choose "Format" under the advanced options screen. It seems like it formats, but then I get the same message of "Windows cannot be installed to this disk. The selected disk is of the GPT partition style." I can continue to click "format" but i keep getting the same error.
There is the answer, right in front of us ....
Delete the bootcamp partition and start again the correct partition type is GUID but BootCamp should take care of that automatically so try again.

Windows ISO image, what is it and how can I get it to install boot camp?

I'm not very computer savvy, so if you want to help me out, all I ask is that you dumb things down for me I'm trying to install bootcamp on my computer. My ultimate goal is to install Mathcad. I'm stuck on the Windows ISO image step. I don't know what the ISO image is or where it is... This is what it all looks like. Please help!

If you have a networked printer, they sometimes have SD Card slots, USB thumbdrive slots, etc... and the printer offers to be a file server to share the contents of those removable camera storage devices.
It is possible your home WiFi router can also act as a printer server, or with a USB disk (or thumb drive) attached, a file server.
You could use a utility such as Bonjour Browser which will give you more information about the devices it sees on your home network
<http://www.macupdate.com/app/mac/13388/bonjour-browser>

How can I install Windows 7 with Boot Camp from a Usb memory stick?

What exactly do I need to do to the memory stick?

Depends on the game. Most programs have no problem installing on an external drive.
Of course depending on the game, performance may or may not be an issue. A crossword puzzle game will perform better than a real time fast action game running from an external drive.
2.5, 3.5, 5400rpm, 7200rpm, SSD drives come as internal or external drives. The external frives have an enclosure to hold the drives. Otherwise they are the same. You can buy empty enclosures into which you would put your drive, if you have an internal drive you want to use as an external drive.

How can routes be split in garmin base camp?

Similar Messages

Maybe you are looking for