How can SAP be configured to prevent users from consuming locks?
How can SAP be configured to prevent users from consuming locks?
The issue is that we want to prevent users to use upto maximum locks and so that we will not get lock table overflow issue. I know that we can assign parameter "enque/table_size" a good amount of value. But it is not for any specific user.
Also want to alert in CCMS if any user reaches to its maximum speficified limit of locks.
Thanks
Gopesh
You cannot set a limit of locks per user. There are two ways to reduce/control the number of locks:
- change fewer records within one transaction
- cover more records with one lock using wildcards
Basically it is an application / development issue.
Best regards, Michael
Similar Messages
-
How can I remove the Emergency Call button from the lock screen Xperia Z2
How can I remove the Emergency Call button from the lock screen on my Z2 phone
Alecuk wrote:
It's like the stupid bold font on the hours or the lock screen clock - i've never seen anything so stupid in all my life.
it's things like this that make a good phone c.r.a.p.
Hi, well if you do a little bit of research on the forum you will be able to see that you can & very easily able to change the font on the clock -
How can I share documents with other users from iWork?
With iWork.com no longer in existence, how can I share large documents with other users?
Dropbox works pretty well for sharing.
Jerry -
How can i change the email and user from app store?
I have a iPhone thats a FIFA from my daugther and she has an account in the app store, i an trying ti configure my app account and the sistem Does not permit me to do it, my question is how can i do to solve my problem thanks
If you mean that you are trying to change the Apple ID used for purchasing apps, go to Settings>Store, tap the Apple ID at the bottom, sign out, then sign back in using the ID you want to use.
-
How can i take off the camara icon from de lock screen
On the lock screen i see the camara icon, how can i take it off from the lock screen?
It cannot be removed from the locked screen. To open the camera, if you are using iOS 5.1, swipe the camera icon upwards.
Message was edited by: The Huntress -
Prevent user from reversing GR if IR has not been reversed.
Is there any system message I can put in configuration to Prevent user from reversing GR if IR has not been reversed.
Other than checking the GR-based IV indicator, is there any alternatives?Hi Clarice,
Below path you can find necessary customizing for your case;
MM>Inventory management and Physical inventory>Goods receipt - For GR-Based IV , Reversal of GR Despite Invoice
Kind regards -
How can we find all the available user-exits in sap without using SMOD?.
How can we find all the available user-exits in sap without using SMOD?.
Hi,
Please check this links for user exits list.
http://www.planetsap.com/Userexit_List.htm
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/ab038.htm
Regards,
Ferry Lianto -
SAP Security: how can i findout any changes for user acess
hi ,
How can i check the changes in user access for some transactions?
i have tried with S_BCE_68001439 transction, but i didn't find any changes in the respective roles which were assigned to the particular user ID.
is there any other way to find out changes in user acess?
Please respond at the earliest. Thanks in advance.
Ramesh.Ramesh,
You should first look at what as changed with the user master record, you can check this by going to SU01, enter the User ID and goto Information Menu and Change Documents for users, you can then specify no start date and any other criteria you want to see changes to the user master.
Then if nothing has changed here, or as an extra check you can goto PFCG, open the Role for display and goto Utilities Menu and Display Changes. You can then do the same as before and specify no start date with other criteria to find changes to any Role the user has.
Hope this helps.
Regards
Ashley -
How do I prevent users from being able to update Firmware
I have several users (14) with iPad 2 and they rely on an in-house developed App. we have yet to test this App on iOS 5.1 and therefore want to avoid any of the users updating the iPads at all cost!
this question is in two parts:
How can I prevent users from upgrading firmware themselves short of just asking nicely?
How can I stop the iPad from automatically downloading the Upgrade when I deploy a Policy using the iPhone Configuration Utility?
Any advice would be great!We've been looking at the AirWatch mdm and have been told it has this capability. Not sure if it would be justified from an economic standpoint for you, however.
-
How can we identify what are all user exits are there for sales orders,deli
Dear All,
How can we identify what are all user exits are there for sales orders,deliverys and invoices
thanks
nitchel vHi Nitchel
There are many ways to find out the user exits..
For example for VA01.
Goto Transaction ie VA01:
goto System-- Status
doubleclick on the program name ie SAPMV45A
SE38 -> Enter the program name and in the program( SAPMV45A) goto -- attributes
get the package name from here ie VA
note the package(VA) and get back to main screen
goto SMOD tcode and click on find button in the package spec giv the package name ie VA and execute it
you will find list of exits available
check out the exit that suits ur requirement
goto cmod and create a new project and implement in that user exit.
You will get the following exits in SMOD..
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly
V45L0001 SD component supplier processing (customer enhancements
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing
For Delivery you will get .. here the package name will be VL.
V02V0001 Sales area determination for stock transport order
V02V0002 User exit for storage location determination
V02V0003 User exit for gate + matl staging area determination (h
V02V0004 User Exit for Staging Area Determination (Item)
V50PSTAT Delivery: Item Status Calculation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50R0001 Collective processing for delivery creation
V50R0002 Collective processing for delivery creation
V50R0004 Calculation of Stock for POs for Shipping Due Date List
V50S0001 User Exits for Delivery Processing
V53C0001 Rough workload calculation in time per item
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53W0001 User exits for creating picking waves
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
For Billing VF01..Package is VF..
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX009 Billing doc. processing KIDONO (payment reference numbe
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedu
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lis
V61A0001 Customer enhancement: Pricing
Or another way is ..
- Get the program name for that T-Code
- Go to that program
- In that program, search for word 'EXIT' or 'CUSTOMER-FUNCTION' by using where-used list which will give u the list of user exits for that program
And also you can check in the tables in SE16 for user exits..
MODSAP - Stores SAP Enhancements
MODSAPT - Stores SAP Enhancements - Short Texts
MODACT - Stores Modifications
And there are other ways as well , pls check the forum for this ,
Regards,
Vvieks
Note : If you have any specific requirement then pls let us know , we will guide you -
In ST03 , how can i see the Query name, user id,how many times executed the
HI Experts,
In ST03 , how can i see the Query name, user id,how many times executed the query.
these details how do i get from the above transaction.
EX:-if there is one report name X,I want to know how many users had executed X report today,weekly,monthly.
ex:-query userid total number of execution
sales order 0000555 5 times
custmer 05855 2 times
fast reply will be appreciated,Hi,
Look here:
http://help.sap.com/saphelp_nw04/helpdata/en/3b/54df4204892a78e10000000a155106/frameset.htm
Also check these:
http://help.sap.com/saphelp_nw2004s/helpdata/en/2d/b8be3befaefc75e10000000a114084/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/25/ece73a39e74d27e10000000a114084/frameset.htm
Hope this helps..
Bye
Dinesh -
In ST03 , how can i see the Query name, user id,how many times .
HI Experts,
In ST03 , how can i see the Query name, user id,how many times executed the query.
these details how do i get from the above transaction.
Points will be awarded.
BR
sivsHi Siva,
Reporting statistics data is only written to the database table if BW statistics have been manually activated for the corresponding InfoProvider first. If this has not been done, it is therefore not possible to display any reporting statistics in transaction ST03.
Therefore activate the reporting statistics for all relevant InfoProviders. To do this, set the OLAP flag in the BW Administrator Workbench (transaction RSA1) in the area Tools ® BW Statistics for InfoProvider.
Check here...........
http://help.sap.com/saphelp_nw04/helpdata/en/ca/86df4254d81e1fe10000000a155106/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c8c4d794-0501-0010-a693-918a17e663cc
Hope this will help you shiva.........
Regrads,
Vijay -
How to prevent users from saving and emailing intranet documents externally
Someone in our company needs to upload a pdf to our sharepoint intranet site for internal-only use. How can I prevent users from downloading it and emailing it externally?
I mean, a user could screenshot it I guess, but I need to give management a due diligence answer.You would need to look into a reverse proxy/firewall that had the ability to block access based on content. This isn't something you can accomplish out of the box with SharePoint (even with AD RMS).
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
How can i get report no of user login in system
Hello
how can i get report no of user login in system
means user license login per day in system
what is strategy of SAP against licenses audit
how can i manage my license users ??????????
JayeshHi Jayesh
You can use the Audit Transactions. Set the Audit Profile with Tx SM19 and then report with Tx SM20.
You can also use the programs CCUINIT and CCUEVAL. Report CCUINIT initialises the measurement of current users and report CCUEVAL will provide the report and the logs for you to download.
Also regarding the licensing of users,
Refer to http://www.sap-img.com/sap-overview/help-to-understand-sap-licenses.htm
and https://websmp104.sap-ag.de/licenseauditing
You will get everything you need
Rohit -
How can we find the list of user exits for a transaction
hi all
iam new in user exits please send the basic details
how can we find the list of user exit for a perticular transaction and how can we determine that a particulr user exit is used for a field
regards
jagadishhi,
check the below links for userexits
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
FAQ's
http://http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
http://www.easymarketplace.de/userexit.php
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
1. what is the defference between enhancement and user-exits?
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
Re: difference between user exits & customer exits
Some Questions ! Plz help...
http://searchsap.techtarget.com/expert/KnowledgebaseAnswer/0,289625,sid21_gci1190924_tax299358,00.html?bucket=ETA
2. Difference between CMOD and SMOD?
http://www.sap-img.com/abap/what-is-the-difference-between-smod-and-cmod.htm
http://www.sap-img.com/abap.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236095
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236107
check these links..
http://www.sapgenie.com/abap/tips_and_tricks.htm
http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
passing selet-option variable to subrouine...
Finding the user-exits of a SAP transaction code
Finding the user-exits of a SAP transaction code
Enter the transaction code in which you are looking for the user-exit
and it will list you the list of user-exits in the transaction code.
Also a drill down is possible which will help you to branch to SMOD.
Written by : SAP Basis, ABAP Programming and Other IMG Stuff
http://www.sap-img.com/*
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
*---End of Program
if u want to find the function exit
then check the below code
REPORT ZV_FIND_EXIT NO STANDARD PAGE HEADING.
TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.
TABLES : TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME =
TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT = 'SMOD'
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND
TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(95) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Exit Name',
21 SY-VLINE ,
22 'Description',
95 SY-VLINE.
WRITE:/(95) SY-ULINE.
LOOP AT JTAB.
SELECT SINGLE * FROM MODSAPT
WHERE SPRSL = SY-LANGU AND
NAME = JTAB-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 SY-VLINE,
2 JTAB-OBJ_NAME HOTSPOT ON,
21 SY-VLINE ,
22 MODSAPT-MODTEXT,
95 SY-VLINE.
ENDLOOP.
WRITE:/(95) SY-ULINE.
DESCRIBE TABLE JTAB.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , SY-TFILL.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
or
1. in se11, goto table MODSAP
View table contents
2. in Type field, enter 'E' (for function exit)
3. For that tcode, u should know the program name.
eg. SAPLLMOB
4. then type SAPLLMOB and execute
or
REPORT z34331_user_exit .
TABLES : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP Modifactions
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Regards,
Naveen
Maybe you are looking for
-
Unable to see EXCEL output for xml report--browser issues?
hi i have created and registered an xml publisher report. i want to see the out put in Excel format.When i run the report i get junk data as output. is there any profile setting or viewer profiles that i need to change to view the output in excel. i
-
Where do variant values get stored in SAP?
Hello This is basically an ABAP question, but I am still putting it here. If we have a custom report (program) in R.3, and a user creates multiple variants for that program, is there a table which stores the values that he has entered for that varian
-
I cannot select the "Enable a hyperlink" in ibooks author. Anybody knows why?
I selected a word in the document and then followed the instruction to go to Inspector and opened the Link, but Enable a hyperlink was greyed out. Also cannot type anyhing in Add Bookmark. Doyou know why and how to do it right? Thanks.
-
Hi, Can somebody please help. I have a template BOM in a sales quote. Now I want to delete some of the child items but it must just show the total price of the remaining child items at ONLY the parent item so in other words they just want to see the
-
LIst of Standard Oracle Financials RXi reports
Hi All, would anyone know if there's a list of Standard Oracle Financials RXi Reports for Rel12+? I've tried to search the forum as well as documentation links but somehow came out with very little. any help would be appreciated. Thanks. Nathaniel