How can  SAP XI JMS Queue communicate with external JMS Queue

Dear All ,
we are Implementing SAP XI . Sender business system is splitting a file into small files and keeping them into JMS queues we want SAP XI JMS queue should communicate directly with the sender JMS queue (which is an external JMS queue) without any Adapter ,programming efforts and Middleware.
Can you please tell me is it possible?

I dont think it is possible directly without adapter

Similar Messages

  • I am new to IPAD and I want o use facetime, how can I use it to communicate with my mac at home, do I need to create another account with a different email account

    I am new to IPAD and I want o use facetime, how can I use it to communicate with my mac at home, do I need to create another account with a different email account

    do I need to create another account with a different email account
    Yes, the email addresses need to be unique to each device. You may use the same Apple ID on each device, but the email address used by each device needs to be different.

  • How can I use Voip to communicat with my voice in Labview

    i want to be able to call my computer using Voip. I know this service
    cost money. I dont just want to call the computer, i want to call
    labview and all labview to have access to my voice, so i can do speech
    commands on it.

    Hello,
    Thank you for contacting National Instruments. I would like to apologize for the delay in responding to your support request. I understand that you would like to use Voip capabilities to access your computer remotely and then communicate with LabVIEW using speech recognition.
    I know of a LabVIEW example file that describes the voice recognition capabilities of LabVIEW. Also, there is a link to example programs within this database entry. To access the entry, go to the National Instruments support portal: http://niweb2.natinst.com/ae/portal.htm and search for �voice recognition LabView.� Click the first entry in the list: �Voice Recognition in LabVIEW - Example - Development Library - National Instruments.� You will be able to find helpful information here.
    I hope this helps! Please let me know if I can help you further. Have a great day!
    Kind Regards,
    Joe Des Rosier
    National Instruments

  • Can BEA JMS C APIs be used to communicate with other JMS servers?

    Hello,
              Can BEA JMS C APIs be used to communicate with other JMS servers?
              If yes, is it enough to download, compile the JMS C APIs, and link the C applications to the libraries (shared or static) produced?
              If not, can you point me to an open source framework that can be used to enable C applications to communicate with JMS servers?
              I have HP-UX server that has both C and Java compilers (Java 1.5).

    The JMS C client is a pre-compiled library - we don't supply the source - so C applications link to it. If I recall correctly, there is an HP version. The C client library is actually thin layer that uses JNI to directly invoke a Java JMS client running in an embedded JVM.
              The library might work with other vendor's Java JMS clients, but BEA does not officially support this usage.
              Tom

  • I have a carillon 25 keyboard (bad choice, I know) and I can't get it to communicate with my mac at all! I'm running logic pro 9 and reason 5. I get signal in from my M Audio trigger finger so I know it isnt an entirely mac based problem. Thanks!!!

    I have a carillon 25 keyboard (bad choice, I know) and I can't get it to communicate with my mac at all! I'm running logic pro 9 and reason 5. I get signal in from my M Audio trigger finger so I know it isnt an entirely mac based problem. Thanks!!!

    Well, how have to determined no signal is being recieved to your mac?
    Have you got something that shows the actual signal? Or have you just been trying to control a VST? What software are you using by the way?
    I personnally went with a AKAI MPK25, because it's made already mapped for logic & ableton etc, so it just makes things incredibly easy.
    I would suggest you return it if you can as a dead unit & perhaps look at something else a bit easier?
    Otherwise, if you just want to get this working we can have a look a bit deeper.
    And driver? OS X driver?

  • How can the info block be assigned with the view and assign view to users.

    Dear Friends,
    Anyone could plz tell me how can the info block be assigned with the view and assign view to users.  Also how can the info block in sale summary be assigned with a view and how to assign this view for user.
    Regards,
    Ashima

    Hi,
    To define view and to make it default
    Goto SAP IMG > Sales and Distribution > Sales Support (CAS) > Sales Summary > Define Reporting Views (Tcode:OVCD).
    To assign default user to the view.
    Goto SAP IMG > Sales and Distribution > Sales Support (CAS) > Sales Summary > Assign Default View To User (Tcode:OVCC).
    To assign Elements of SAPScript "SD-SALES-SUMMARY" to information Blocks To A View use
    Goto SAP IMG > Sales and Distribution > Sales Support (CAS) > Sales Summary > Assign Information Blocks To A View (Tcode:OVCB).

  • How can SAP be configured to prevent users from consuming locks?

    How can SAP be configured to prevent users from consuming locks?
    The issue is that we want to prevent users to use upto maximum locks and so that we will not get lock table overflow issue. I know that we can assign parameter "enque/table_size" a good amount of value. But it is not for any specific user.
    Also want to alert in CCMS if any user reaches to its maximum speficified limit of locks.
    Thanks
    Gopesh

    You cannot set a limit of locks per user. There are two ways to reduce/control the number of locks:
    - change fewer records within one transaction
    - cover more records with one lock using wildcards
    Basically it is an application / development issue.
    Best regards, Michael

  • How does ADS on CE environment communicate with a NW 7.01 EP Portal

    I am at a customer site that is installing Adobe Document Services on their CE environment.  The already have an AS Java with EP portal on it but decided not to use ADS on the portal server and instead, configure ADS on CE 7.2.  Can you explain to me how the ADS on CE will communicate with EP Portal on AS JAVA NW 7.01?
    I understand the connection with ABAP (using ADSUSER) and the RFC connection but I don't see how they can publish PDF's to the portal and have ADS on CE communicate.
    Thanks for the information.
    Peggy

    i think you just have to configure the ws client in VA of nw7.01.
    make it point to ads of ce server

  • How can I recover my old account with a new one?

    Hi, my hotmail account it was hacked, I can't have acces to my adobe account anymore.
    How can I get acces to my old account with a new Adobe ID?
    I'm already subscribed to creative cloud and I can't have acces to my account and upgrade my products.
    what can I do?
    Thanks

    Thanks Romshina
    I read the link you send me and thanks, but the thing is that I still can't get into my Adobe Id, because when I try they ask me to reset my password in an email they will send me to my old account and there is the problem, because I don't have acces to that old acount, [email protected]
    now this is my new email, because the las one it was hacked and I just can't get back to it.
    So I would like to have access to my account and update this new email account, to have acces to my CC account.
    Thanks
    Date: Fri, 27 Dec 2013 06:51:15 -0800
    From: [email protected]
    To: <Removed by Moderator>
    Subject: Re: How can I recover my old account with a new one? How can I recover my old account with a new one?
        Re: How can I recover my old account with a new one?
        created by Romsinha in Adobe Creative Cloud - View the full discussion
    Hi Guillermo Castellanos,
    Please refer the knowledge base article: http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sig n-faq.html.
    Regards,
    Romit Sinha
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5959347#5959347
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re: How can I recover my old account with a new one?
    To unsubscribe from this thread, please visit the message page at Re: How can I recover my old account with a new one?. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Adobe Creative Cloud at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • How can we view the data asociated with Request ID

    Hi All,
    I have data loaded in an ODS there are multiple files loaded in this ODS. Now i want to view data for a perticuler request OR i want to know how can we know the data associated with a perticular request.
    Please help me out.
    Thanks & Regards
    Amit Kumar

    Copy the request number (not request ID) from the ODS manage screen, Goto RSRQ give the request number and execute. it shows the monitor screen- now goto PSA from the top and check the data. But this possible only if you are loading data to PSA also along with ODS.
    Otherwise, Goto Display Data of ODS from the right click on it -- in the selection screen give the Request ID that you want to check the data. Then it displays only that request data.
    Hope this helps.
    Veerendra.
    Edited by: denduluri veerendra kumar on Dec 1, 2009 12:40 PM
    Edited by: denduluri veerendra kumar on Dec 1, 2009 12:43 PM

  • How can I use my Apple ID with 2 Apple devices?

    I just got an ipad mini and I registered it with the same Apple ID I use for my iphone 4s. Everything was fine until I downloaded apps to the ipad and noticed that the ones I had on both devices  no longer opened on my iphone. Why is this? How can I use my Apple ID with 2 Apple devices and how can I recover my apps on my iphone?

    I've had an iPad for almost two years. When I purchased an iPhone last fall I set it up to use the same Apple ID as my iPhone. I've had no problems doing this. Try resetting each device and see what happens.
    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • How can i use my apple ID with the itune store over my windows laptop

    how can i use my apple ID with the itune store over my windows laptop

    If you don't have iTunes installed on your laptop then you can download and install it from here : http://www.apple.com/itunes/download/
    You can then log into your account on it via the Store > Sign In menu option (on iTunes 11 on a PC you can get the menus to show via control-B) :
    And you can then select the Store on the left-hand sidebar (you can enable the sidebar via control-S), and then browse items in the store and buy them by clickin on their price.

  • How can I use my time capsule with windows7

    How can I use my time capsule with windows7?

    This is asked regularly.
    https://discussions.apple.com/message/10978060#10978060
    Look at the more like this. On the right column next to the post.
    Load airport utility for windows.. which will also load bonjour for windows.
    In windows explorer type \\TCname or \\TCipaddress (replacing with the actual values.. names with spaces will give you trouble so change all names in the TC to SMB compatible or actual ip address).

  • How to restore my ipad?My ipad say on screen CONNECT TO ITUNE.How can i do when i connect with computer.It is need itune new version.Can you sent me.I will be waiting your answer.Please help me sir.

    How to restore my ipad?My ipad say on screen CONNECT TO ITUNE.How can i do when i connect with computer.It is need itune new version.Can you sent me.I will be waiting your answer.Please help me sir.

    Check for Updates.
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%208/78d42b19fa42e8d83b5 5a65e1333373f_zpsf58bbe10.jpg

  • How can I sync my iPad 2 with my new MacBook Pro when it is already synced with my old MacBook? I am getting a message on the new MacBook Pro that says I am not allowed to sync the iPad 2 because it is synced to another iTunes library.

    How can I sync my iPad 2 with my new MacBook Pro when it is already synced with my old MacBook? I am getting a message on the new MacBook Pro that says I am not allowed to sync the iPad 2 because it is synced to another iTunes library.

    1) ensure iTunes is authorized for your iTunes store account(s)
    2) connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
    3) sync the device
    iTunes will wipe the iPad but, since you transferred your purchases in the previous step, your content will be in your library and you can re-populate the iPad with it.
    above works for purchases from the iTunes store. for everything else, check out this post by Zevoneer.
    also, there are PhoneView and iRip.

Maybe you are looking for

  • How can I delete photos from iPad but not iCloud?

    Before setting up iCloud, my girlfriend downloaded photos from her camera to her iPad.  We now have iCloud set up, but the photos on her iPad remain in the "Photos" album instead of Photo Stream.  I would like to delete the photos from the iPad to fr

  • Business Rule in shared library

    Hi, We have 2 portal projects. Say Project 1 and Project2. Project 1 is deployed as a shared library for project2. Project2 is deployed as an application. I have a business rule in a Project1's datasync project. And executing that rule from the contr

  • Mobile vertical scroll bar in Responsive Theme header

    This may be a simple resolution; however, after several searches on this forum, I am unable to find the answer. I am using RH 11 with HTML5 (version 11.0.3.268). While generating the HTML5 Help, the vertical scroll bar present in the Responsive Theme

  • Why does my iChat require a login keychain?

    there's this thing that comes up whenever i try to login "messages can't log in to (my username) because your login ID or password is incorrect". It then prompts me to fill out a password. I have tried entering my apple ID, my actual computer passwor

  • Wbs element can no longer be shifted error while creating wbs

    i am trying to create wbs with bapi_project_maintain, i am facing an error with message no 418 WBS element 1899-CAP-10-100-001-1507 can no longer be shifted