How can set the responsiblity name and operatingunit name at header level y

Dear all
Good Morning
i have to set the respname and org name at header level
i taken the item at page level userinfo it is coming the right side of the page i want to be set at header level only in left side top only...
is there any item style for this requiremt
Regards
Sreekanth

Dear Sumit
I designed one custom page in top header level i want to put Operating unit name and responsiblity name i mean in which responsiblity user working in that page...
i want to set these two properties
in process request i wrote the code
int orgid=pagecontext.orgid();
String respname = pageContext.getResponsibilityName();
i want to set these values to icorresponding items
these items i want to create at the top level of the header
which region which style.........
in page level i taken userinfo item it is coming right side of the header
i want to set these two items either left or right i want to set header level only
Regards
Sreekanth

Similar Messages

How can validate the ASM size and free space correctly?

Dears ,,
I faced problem in ASM size as it appeared in alert file as below
ORA-19504: failed to create file "+DG_DATA"
ORA-17502: ksfdcre:4 Failed to create file +DG_DATA
ORA-15041: diskgroup space exhausted
So we resize ASM space and large it. But we faced the same problem also although there is free space in ASM.
It seems that the shown free space is not real.
How can validate the ASM size and free space correctly?
Thanks & Regards,,

*Oracle DBA* wrote:
Dears ,,
I faced problem in ASM size as it appeared in alert file as below
ORA-19504: failed to create file "+DG_DATA"
ORA-17502: ksfdcre:4 Failed to create file +DG_DATA
ORA-15041: diskgroup space exhausted
So we resize ASM space and large it. But we faced the same problem also although there is free space in ASM.
It seems that the shown free space is not real.
How can validate the ASM size and free space correctly?
Thanks & Regards,,
I was having this problem. Im my case i couldn add datafiles to a tablespace despite the fact that i was having a lot of space in the asm. Try rebalancing. It might help. In my case rebalancing also didn work because it seems that there need to be a threshold space in all the disks for the rebalancing to happen which was not in my case, so i had to shrink some unused space in the tablespace and then after gaining the required space I rebalanced the disk and then the disks got rebalanced, also i was able to use the free space that was showing .

HT201303 how can reset the security question and answer ?

how can reset the security question and answer ?

Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
1. Go to: Apple Express Lane;
2. Under Product Categories choose iTunes;
3. Then choose iTunes Store;
4. Then choose Account Management;
5. Now choose iTunes Store Security and answer the bullet questions, then click
      Continue;
6. Sign in with your Apple ID and press Continue;
7. Under Contact Options fill out the information and advise iTunes that you would
      like your security/challenge questions reset;
8. Click Send/Continue.
You should get a response within 24 hours by email.
Another user had success doing the following:
I got some help from an apple assistant on the phone. It is kind of round about way to get in.
Here is what he said to do and it is working for me...
a. on the device that is asking you for the security questions go to "settings", > "store" >
      tap the Apple ID and choose view"Apple ID" and sign in.
b. Tap on payment information and add a credit/debit card of your preference then select
      "done", in the upper right corner
c. sign out and back into iTunes on the device by going to "settings"> "store" > tap the
      Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you
      should be asked to verify your security code for the credit /debit card and NOT the
      security questions.
d. At this time you can remove the card by going back in to edit the payment info and
      selecting "none" as the card type then saving the changes by selecting "done". You
      should now be able to use your iTunes store credit without answering the security
      questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends!

Since the last update Yosemite 10.10.2 , Safari returned to the previous presentation and google chrome moved ????? ( Mac Book Pro) , you can set the update uninstall and reinstall ? thank you

since the last update Yosemite 10.10.2 , Safari returned to the previous presentation and google chrome moved ????? ( Mac Book Pro) , you can set the update uninstall and reinstall ? thank you (I'm French and my English is not mastered,sorry)

Try running the combo update.
10.10.2 Combo Update

How to set the JNDI resources and params

I am trying to connect my Crystal reports to my JSP page.
I am using MySql DB and TomCat 4.1
My web.xml is in the right place and contains the JNDI name (jdbc/MyDB)
I was able to accomplish the following:
1) Setting the connection pool and
2) Able to specify the JDBC database option and was also able to generate the report in the designer using this JDBC option connectivity.
However, when I try to run the report from the JSP page, it gives me the following error:
javax.servlet.jsp.JspException: Report location is not specified in the configuration file at
com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown Source)
at org.apache.jsp.testing_jsp._jspx_meth_crviewer_viewer_0(testing_jsp.java:159)My CrystalReportEngine-config.xml resides in
C:\Program Files\Apache Group\Tomcat 4.1\webapps\WebModule1\WEB-INF\classes
and it contains the following
<CrystalReportEngine-configuration>
<reportlocation>../..</reportlocation>
<timeout>10</timeout>
<keycode>Azzzzzzzzzzzzzzzzzzzzzz</keycode> </CrystalReportEngine-configuration>
My report that I am trying to execute resides in the root of my application (where it supposed to be).
This lead me to believe that I probably need to specify a JNDI datasource.!! Do you agree? If so, how can I specify the
JNDI Provider URL
JNDI Username (is this the tomcat admin user name)?
JNDI PWD
Initial CONTEXTReally appreciate any help you can offer

Can anyone tell me where to post the previouse message to get a solution, or may be a hint?
If i am doing anything wrong to not get a response, please let me know so i can reward it or correct it.
thanks

How to change the full host and domain name on OS X Leopard...

I recently bought an iMac, and I'm trying to configure it for my network. The question I have is, how can I change the host name and domain name from Skuld.local to skuld.tolharadys.net?
After mucking around with a few searches on Google, I've gotten the domain name to stick since running domainname returns tolharadys.net. Also I can change the hostname as reported by 'hostname' temporarily by running 'hostname skuld.tolharadys.net' in Terminal.app. However, this isn't persistent after reboots. Ideas are welcome.

You would need a DNS server on your network configured to answer authoritatively for that particular subdomain.

How to set the X-position and Y-position

I started an application but was struck due to a problem.
The problem was : I was unable to set the X-position and Y-position in the desired place... Any one who can help please help me to continue my application......
I wanted to set my choice group elements in the center of the screen.. help me plz....

You want to change to x/y position of what? The main frame?
If it is the Frame class take a look into the CDC/PP specification:
"An implementation may prohibit resizing of Frames by a user. In such a case, attempts to make any Frame resizable will fail silently"

How to set the BARCODE width and length for label printing..

Hi All,
How to set the Code 39 barcode label format in the sizxe of 0.20" * 1.4". By default while printing barcode size exceeds my current requirement. Please let me know to customize the size of barcode labels.
Thanks.

I don't know what you mean by "Code 39" because my Output Designer software doesn't offer that barcode (or do you mean "code 3 of 9?). In any case, are you trying to control the size of the text (which is what I think of when you refer to "label")? If you are, then just change the font & size. If you are wanting to modify the physical characteristics of the barcode itself (height & length for a certain number of characters) then you are probably out of luck. Or at least in for some trial & error.
There are a series of "barcode.xxx" files in the 'config' folder where Output Designer was installed to. These are text files that contain the physical characteristics of the various barcodes for various printers. The parameters that you would be interested in is the height and width of the bars (black & white). For example, a barcode might be defined as .400 high with narrow bars 3 "dots" wide, wide bars 9 "dots" wide and white space the same or different. Presumably changing these values would affect the generated barcode. For example, in this example the wide bars are 3 times the width of the narrow bars so I would assume that relationship would have to remain. To make the resulting barcode shorter you would then use 2 for the narrow and 6 for the wide.
You would have to make the change in the file(s) that would be used for your printer(s).
There are four width values for each of the parameters. Most of the barcodes only use 2 but some have 4. I'm assuming that when there are 4, like in "4 8 12 16", that the barcode definition has 4 different widths of bars and/or spaces.
There is no guarantee that the scanning hardware & software will "see" and interpret the resulting barcode correctly.

2 Question How to set the page size and full screen

I am looking to find out how to set the page to be 1024 by
768 static and also how to force a browser window to go to full
screen. Thanks

Hi Ludek,
i could solve the issue by using the follwing code.
report = new ReportDocument();
PageMargins customPageMargin = report.PrintOptions.PageMargins;
report.PrintOptions.PaperOrientation = PaperOrientation.Portrait;
report.PrintOptions.PaperSize = PaperSize.Paper10x14;
customPageMargin.rightMargin = 1;
customPageMargin.topMargin = 0;
customPageMargin.bottomMargin = 0;
report.PrintOptions.ApplyPageMargins(customPageMargin);
Thanks for you help.
Regards,
smitha.

How Can set the General Modification in OBYC

Hi, Experts.
    I have a question when configure the OBYC, who can explan the Valuation Modification and General Modification? And in our IMG the setting is
General Modifiacation             Account
V00          21113000          Lability
V01          11473000          Asset
V02          21113020          Lability
V03          21159000          Lability
V04          11504000          Asset
V05          11502000          Asset
V06          11501000          Asset
V07          11432099          Asset
But when I do GR and it always post to the V00   21113000. I do not know Why?

Hi
During GR the system will look for the General Modifier in account assignment category then it will look for the entries in GBB to pick the GL account.
IMG>MM>Purchasing>Account assignment>Maintain acc assignment cateogry>for example K - cost center is assigned with Acc modification VBR
What account assignment category you are using in your PO?
Hope it helps
THanks/karthik

How to set the Selected row and Column in JTable

Hi,
i have a problem like the JTable having one Method getSelectedRow() and getSelectedColumn to know the Selected row and Column but if i want to explicitly set the Selected Row and Column,then there is no such type of Methods.If anybody has any solution then i will be thankful to him/her.
Praveen K Saxena

Is that what you're looking for? :myTable.getSelectionModel().setSelectionInterval(row, row);
myTable.getColumnModel().getSelectionModel().setSelectionInterval(column, column);

How to set the page size and the margins programatically

Hello,
I am working with crystal report XI Release2 and asp.net.
One of my report is having 4 graphs in a single report.In order to display all the graphs in one page i have set the paper size as A3.(Via Crysta report ->File->Page set up)
But the page size A3 is not provided by all printers.So problem comes when the application is diployed on a machine which does not support A3 Printer.All the graphs will not be shown on a single page.
Also Each and Every time ,when the application is diployed on a machine,user has to open the crystal report and adjust the page size accordingly to get all the reports on a single page.
This is a kind of usability issue also.
Is it possible to set the page size and the margins programatically say for eg 11 X 17.so that with out doing anything all the 4 graphs will get displayed on a single page ?
Please let me know if you require more information regarding this issue.
Thanks in advance.
smitha.

Hi Ludek,
i could solve the issue by using the follwing code.
report = new ReportDocument();
PageMargins customPageMargin = report.PrintOptions.PageMargins;
report.PrintOptions.PaperOrientation = PaperOrientation.Portrait;
report.PrintOptions.PaperSize = PaperSize.Paper10x14;
customPageMargin.rightMargin = 1;
customPageMargin.topMargin = 0;
customPageMargin.bottomMargin = 0;
report.PrintOptions.ApplyPageMargins(customPageMargin);
Thanks for you help.
Regards,
smitha.

How to find the killed session and machine name

Hi,
At the time of batch job running .somebody killed that session .let me know how to find out the particular user name db level or oslevel .from which machine they killed how to find out at OS level . but when i have set the audit_trail=os only SYSDBA user activities are audited not the other user activities.
The server is AIX and db version 11i .provide the query for finding or os level .
thanks,
DBC.
Edited by: dbc001 on Mar 26, 2013 9:48 PM

Are you sure that somebosy had killed the session? Did you get any error regarding kill session? Is there any other errors you can see in logs?its suspect only....
>
How that job was scheduled?...actually we have lot of source systems, from those source system we are getting the data into BI machine, by using BI apps team process data and trigger load jobs @db
Apps team is having database unix logins aswell as db logins to process their requests.
Your OS admin can check the history upto some extent? Check if he has auditing enabled at OS level?we are in the process of checking with OS sysadmin.
upto now we didnt got any clue....apps team successfully re-ran failed job.

How can I match pic description and file names?

I hate bunches of pictures called DCSNXXXX on my HD, as they are imported from my camera. Most of my last two year´s imports have this as file name.
I was thrilled to see in iPhoto 08 a 'Batch Change' option on the menu, and used it right away to change picture names by groups.
I was dissapointed to find out though that the actual file name remains the same.
How can I match name in iPhoto 08 with file name?
Thanks
J

J
You can't. And that Batch Change command has been there for the last several versions too.
When you name a Picture in iPhoto you are adding a title to the photo, not changing the Filename. Filenames are irrelevant in iPhoto. The entire point of iPhoto is that you organise your photos without recourse to your files. So, searching in iPhoto is about searching for a Photo, not a file. Hence the title is more important than the filename.
Are you trying to find the file?
There are many, many ways to access your files in iPhoto:
For 10.5 users: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. If you're using Gmail you can use THIS
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
Or, if you want to access the files with iPhoto not running, then create a Media Browser using Automator (takes about 10 seconds) or use THIS
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
Finally, if you export the file using the File -> Export command, then you can use the Title as a Filename on the exported version.
If you really want to rename the files, then you will need to do this before you import them to iPhoto. Renaming them once they are in the Library will corrupt your Library.
Regards
TD

How to set the system date and time in LabVIEW 6i?

Hi,
How can I set the time of the computer from Labview 6i? Is there any function to do this?
Thanks.

Arnau wrote in message news:<[email protected]>...
> Hi,
>
> How can I set the time of the computer from Labview 6i? Is there any
> function to do this?
>
> Thanks.
Not natively that I know of. You could use a LabVIEW DLL call to link
to a Win32 API call which sets the date and time. You would need to
have privileges to do it.
Doug D.
[email protected]

How can set the responsiblity name and operatingunit name at header level y

Similar Messages

Maybe you are looking for