How can synchronize 2 virtual machine
hi
i have a question
i have 2 virtual machine with two different ip adress now can i synch these 2 virtual machines?
i know VR can sync but in vr we have one vm that is turn on and second vm is off when 1st vm failed we have to run second vm
now how can do this plane ? 2 vms are up and both of them are synch
thanks
but fault tolerance has been supported more than one cpu core in esxi 6 and i use esxi 5.5 for this have to do an update and it is hard to update all vmware environment please introduce a software and help me for solve the problem
best regards
babak
Similar Messages
-
How can I get Virtual Machine NIC traffic usage data using SCOM 2012 R2 ?
Hello Guys,
How can I get Hyper-V 2012 r2 Virtual Machine NIC traffic usage data using SCOM 2012 R2 ?
Thanks
NM-BGHi,
Please refer to the following links:
Hyper-V Management Pack Extensions 2012 / 2012 R2
https://hypervmpe2012.codeplex.com/
System Center Management Pack for Windows Server 2012 R2 Hyper-V
http://www.microsoft.com/en-us/download/details.aspx?id=40798
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
How to import a virtual machine to a Hyper-V server by programme on Windows server 2012 ?
Hi
As we know, Hyper-V of Windows server 2012 can support importing a VM without exporting it first manually now.
So I try to code a programme to do it.
I use the method "ExportVirtualSystemEx" of "Msvm_VirtualSystemManagementService". referenced by
http://msdn.microsoft.com/en-us/library/dd379583(v=vs.85).aspx
But the error said that "You can import a virtual machine only if you used Hyper-V to create and export it."
Since we can import an unexported virtual machine in Hyper-V of windows server 2012 manually, so is there any API to support to do it by programme ?Hi vincent
Thanks for your infomation. It is really useful for us.
I 'd like to know How to adjust path ?
When I use command 'import-vm' to import VM, I got the error "import-vm : Unable to import virtual machine due to configuration errors. Please use Compare-VM to repair the virtual machine."
I try to fix this error referenced by
http://technet.microsoft.com/en-us/library/hh848612.aspx
I ran the commands as bellow :
$report = compare-vm -path 'J:\HyperV\VM2008R2_1\Virtual Machines\6D2B5BF6-0BC0-4B1C-86BA-5A28DAB3DFCF.xml'
$report.Incompatibilities | fl
and got the information:
Message : Virtual Hard Disk file not found.
MessageId : 40010
Source : Microsoft.HyperV.PowerShell.HardDiskDrive
Message : Could not find Ethernet switch 'Broadcom BCM5709C NetXtreme II GigE (NDIS VBD Client) #54 - Virtual
Switch'.
MessageId : 33012
Source : Microsoft.HyperV.PowerShell.VMNetworkAdapter
Message : Virtual Hard Disk file not found.
MessageId : 40010
Source : Microsoft.HyperV.PowerShell.HardDiskDrive
Message : Virtual Hard Disk file not found.
MessageId : 40010
Source : Microsoft.HyperV.PowerShell.HardDiskDrive
Message : Could not find Ethernet switch 'Broadcom BCM5709C NetXtreme II GigE (NDIS VBD Client) #54 - Virtual
Switch'.
MessageId : 33012
Source : Microsoft.HyperV.PowerShell.VMNetworkAdapter
Message : Virtual Hard Disk file not found.
MessageId : 40010
Source : Microsoft.HyperV.PowerShell.HardDiskDrive
Message : Virtual Hard Disk file not found.
MessageId : 40010
Source : Microsoft.HyperV.PowerShell.HardDiskDrive
Message : Could not find Ethernet switch 'Broadcom BCM5709C NetXtreme II GigE (NDIS VBD Client) #54 - Virtual
Switch'.
MessageId : 33012
Source : Microsoft.HyperV.PowerShell.VMNetworkAdapter
Message : Could not find Ethernet switch 'Broadcom BCM5709C NetXtreme II GigE (NDIS VBD Client) #54 - Virtual
Switch'.
MessageId : 33012
Source : Microsoft.HyperV.PowerShell.VMNetworkAdapter
But this web page don't mentioned how to fix the "Virtual Hard Disk file not found" error.
and I don't want to fix the VMNetworkAdapter issue by disconnect it.
So could you told me how to modify the virtual hard disk file path and VMNetworkAdapter to make sure that I can import the virtual machine successfully? -
How can I force Time Machine to make a complete backup of my Hard Drive. I just installed a new external drive for Backup since my previous one failed. Now when I back up, Time Machine only backs up my data folder and the Users folder.
When I start a backup. Time Machine says "Oldest Backup: None; Latest Backup: None", so it seems like it should do a complete backup, but it only does a partial.Hi I'd like to jump in here. Your app showed me this:
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 749.3 GB Disk used: 453.81 GB
Destinations:
Plastic Wrapper [Local] (Last used)
Total size: 999.86 GB
Total number of backups: 64
Oldest backup: 2013-07-24 23:25:11 +0000
Last backup: 2013-11-17 01:40:47 +0000
Size of backup disk: Too small
Backup size 999.86 GB < (Disk used 453.81 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
/sbin excluded from backup!
/usr excluded from backup!
/System excluded from backup!
/bin excluded from backup!
/private excluded from backup!
/Library excluded from backup!
/Applications excluded from backup!
Aside from the size of my backup drive, which I will increase at some point, I'd really like to have time machine backing up all system folders, especially Applications. How to I reset this hidden exclusions?
Thanks,
Darcy -
I am trying to update my time machine backup on time capsule, but time machine keeps trying to create an entirely new backup (evidenced by the 200GB backup size). How can I get time machine to modify my old backup rather than create a new one?
It must have found the old backup corrupt.. so you will more than likely have little choice. You can archive off the old backup if it is still useful.
You can also verify it. See A5 http://pondini.org/TM/Troubleshooting.html
He also has some info on this problem. eg C13. -
How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!
Once you have the drive connected to your Mac, click System Preferences (gear icon) on the dock
Click Time Machine
Click Options
Be default, the hard drive will be Excluded from backups. Click the drive to highlight it, then click the "-" (minus) button at the bottom of the list to remove the drive from Excluded items.
The drive will be backed up on the next Time Machine pass
Everything above assumes that the hard drive has been formatted in Mac OS Extended (Journaled) as Time Machine will only backup drives in that format. -
How can I determine which machines have activated Adobe Acrobat Standard 9?
How can I determine which machines have activated Adobe Acrobat Standard 9?
Hi jrector3,
You need to go to the respective machines and launch Acrobat and check if it prompts for serial number.
You can also go to the help menu and check if 'Deactivate' option is highlighted.
Regards,
Rave -
How can i use time machine with a network drive
I have a Western Digital Net N900 wireless router with a 2TB internal H/D. How can I get Time Machine to reconize it?
Relying only on TM to me is iffy but I would bet you have clones in addition to TM like I do. I agree with everything you said but to the OP question, it is possible. A time capsule or AEBS+HD are pretty similar but one is officially supported while the later is not.
Since I'm rambling a bit I will add this. I only use TM for the times I delete something and then wish I had it back. All my restores or migrations are done from my clones. One clone is made weekly and is a snap shot of my system. One clone I keep remotely located and is updated monthly.
My system:
Internal 1TB
Ext HD1 2TB (1TB data, 1TB clone)
Ext HD2 2TB time machine backup (internal + HD1 data, not the clone)
Remote 1TB clone
I'm fully redudant with my method and it has saved me before. -
I want to create Virtual Machine used iso image (Oracle Enterprise Linux 5 update 3). I use one Shared pool master & Utility Server (in same machine), and 2 Virtual Machine Servers. I can't create Virtual Machine it display Error and log display My iso file doesn't exit! and Server Name display N/A.
and I have 1 question about topology
Once I create Server Pool I choose
- Shared Pool Master , Utility Server , Virtual Machine Server (by default) but when I add Server (choose Virtual Machine Server)
Then I deselect Virtual Machine Server in Server Pool
I'm not sure that Server Pool can be only Shared Pool Master and Utility Server OR Shared Pool Master , Utility Server , Virtual Machine Server (by default)
Thank you so much
Fujimaru
Edited by: user8810641 on 31 ส.ค. 2553, 2:59 น.Hi Fujimaru,
a.) In each server pool, each server can have different responsibilities. In a server pool there exists exactly one server pool master, multiple (at least one) utility servers and multiple VM servers.
These roles can be on one host or distributed. So yes one server with all three roles is possible (that is the standard if you only have 1 server in your server pool).
b.) There are 2 types to create virtual machines from installation media.
If you create a PVM (paravirutalized guest) which is recommended for Linux, then you have to use an NFS share with the .iso file extracted, and cannot use the ISO file directly.
If you create a HVM (hardware virutalized guest) you can use an ISO file.
However this ISO must be imported first into the OVM Manager (Under Resources, ISO Files).
For this the ISO have to be placed in a subfolder under the iso_pool folder (in an OVS repository, e.g. /OVS).
Sebastian -
How can I access Time Machine backups after doing an erase/reinstall of Mavericks?
I recently did a complete erase of my hard drive and re-installed Mavericks. I chose to start clean rather than use any Time Machine back-ups. I used the same external hard drive for my new Time Machine back-ups. Now I cannot open any back-ups/items prior to the re-install via Time Machine. They are listed along the right hand sidebar in Time Machine (star wars view) but will not open when clicked on.
Some files I can access if I go to the actual backup folder - ex a Pages doc BUT ff I try to open the iPhoto library from the back-up folders stored on the external drive, I get the following error message -
I cannot open the iPhoto "package" to access individual photos from these back-ups.
So - how can I get Time Machine to allow access to the pre-install back-ups??
thnx
Message was edited by: Rant&Raver
corrected some spelling errors!To restore the library from your TM backup follow the instructions in this screenshot.
If you want to restore all of your Home folder documents you can use Migration Assistant. -
How can I store time machine backups on Amazon Glacier?
Hello,
How can I use time machine to backup my mac and have the time machine files stored on Amazone Glacier? upload is easy but I wonder how to restore a backup on Glacier to the mac.
Thanks.You need to create the sparsebundle on external drive.. then copy it to the cloud store area. You cannot directly backup TM to the cloud.
And please note.. sparsebundle is a single file.. if a small file inside it corrupts.. the whole thing is corrupt. It might be repaired perhaps but any failure is far more serious than a failure in a simple backup.
I still think TM is unsuitable. You are far better using a software that can rsync to backup.. ie CCC. -
How can I delete time machine back up from my computer hard drive
How can I delete time machine back up from my computer hard drive?
How to Delete a Time Machine Backup - YouTube
If you want to remove an entire Time Machine backup on a backup drive, then the easiest way to do that is to erase the backup drive using Disk Utility. However, this will delete everything on the disk:
Drive Erase Snow Leopard and Earlier
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
If you are preparing an external or a non-startup drive, then open Disk Utility in your Utilities folder.
2. After DU loads select the volume you wish to format from the left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed. -
How can i turn time machine on macbook air?
how can i turn time machine on macbook air?
Attach an external storage device to hold the backups, or choose a Time Capsule on your Network.
System Preferences > Time Capsule
Select the drive which will hold the backups.
Flip the switch in the System Preferences Time Capsule pane to ON. -
How can I change time machine settings?
How can I change time machine settings? I only want Time Machine to backup my Home Folders and the items on the desktop. Currently, it's backing up more files which overwhelm my backup drive. How do I get it to back up Home/Desktop ONLY?
knarfrh60Also, see selecting items to exclude from the backup here...
http://support.apple.com/kb/HT1427
You may also find this Link of interest...
Time Machine Tutorial -
How can I make Time Machine use the ethernet cable to Time Capsule instead of the wireless connection? Wireless is too slow; has been taking 40 hours to create an initial 142 GB backup.
Plug in ethernet .. in the computer.. turn off wireless.
Maybe you are looking for
-
Apple Refuses to Fix my Ipod!
I just sent my 60gb video ipod in because the screen no longer works. There are absolutely no cracks, dents, or visible scratches on my ipod. And yet! Apple said their diagnosis indicates that the "crack" on my screen has resulted from an external ca
-
Anyone else suffering from old emails suddenly reappearing in mailbox?
Hi I seem to be suffering with old emails ( up to 6months old ) reappearing in the mailbox as unread. They seem to be re-downloading from the server not just becoming unread in mailbox. Anyone else having this problem and anyone got a solution to sto
-
Automatic computer discovery by IP address range
My domain is a subdomain of a parent domain and I only manage devices in my own subnet with static IPs. I am just installing SCCM2102 r2 as a trial version! at step 1 to configure and devices to manage, I don't see an option to scan devices via an IP
-
I have just bought apple tv which allows me to play music through airport express but when chose to watch a movie the audio comes from the tv and does not give option listen through other speakers served through airport express. Can you help me ?
-
Hi, I am trying to transport unframed E1 over our MPLS netwrok. Is there any Cisco card/module that support TDMoIP protocol. We have two PA-MC-STM 1 module that is installed in our 7604 PE routers but our test to provide the E1 over MPLS network fail