How can the Ipad leave recovery mode when something happened.

When the Ipad went to recovery mode and started the recovery and update process to IOS 5.1.1, an error is happened, the code is 21. The Ipad stayed in recovery mode. How can I leave it.

According to the iTunes specific error codes help site ....
Error 20, 21, 23, 26, 28, 29, 34, 37
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
http://support.apple.com/kb/TS3694#error21

Similar Messages

Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Restore the ipad from recovery mode

Ive tried to recover my ipad but itunes says its still in recovery mode.
what do i need to do to get the ipad back on

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

How can I start Windows XP Mode when there is no startup link in the Start Menu?

I have installed and had to uninstall and reinstall Windows XP Mode numerous times on my Dell desktop running Windows 7 Professional and now I cannot start it because there is no startup link in the Program Files folder. When i try to reinstal XP Mode
it tells me it's already installed, but I can't find the startup link.
Martin Willcocks

Hi,
Could you find XP mode in Start Menu?
How about using Windows Search feature to search Windows XP Mode?
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to restore ipad in recovery mode

I am trying to restore an iPad Gen 3 on IOS 6 using recovery mode but iTunes cannot find the backup file on my PC while the iPad is in recovery mode.
However, on my PC, iTunes shows that a backup exists when I say that I need to do a restore. The restore can't work due to the passcode being in place and not remembered. The iPad needs to be restored becausee the person forgot their passcode.
Any ideas?
Thanks!

If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

How can the iPad connect to a school network?

Just completing a school assignment and was wondering how the iPad connects to a school network?

If you are looking for the basics of wi-fi connectivity, you can check out this article
http://computer.howstuffworks.com/wireless-network.htm

How can the iPad help a college student

I am going to college in the fall and was wondering what the ipad could do for a college student
Thanks

Determine what you need to do then decide if the iPad would help you do it. Don't decide on hardware then ask what it can do for you. Find out what you need to do then buy the hardware that does it.
Say you were in the market for a car. Would you ask what a Focus could do for you or would you determine what you need to do with a car then buy the car that fits the bill? Say you want to drive off road. Then you likely won't buy a Focus.
Same goes for your iPad question. If you determine you need to write lots of papers for school, then you probably need a computer not an iPad. But if you plan on spending all your time browsing the web maybe the iPad will work for you. But if your browsing includes a lot of flash sites then maybe the iPad is not your best choice.
So decide what you need to do then ask if the iPad will do it for you.

How can you get to Technical Support when something is not working?

I have tried to install an update from Adobe and the Extension Manager will not install.
I keep getting this error code:
"Extension Manager 6.0.8 Update
Installation failed. Error Code: U44M1P7"
Then it tells me to check with Technical Support if it doesn't install after trying again.
There doesn't seem to be any way to reach Technical Support for Adobe Products.
The entire system is only a sales tool. This is, to put it nicely, a pile of manure.
If anyone knows how to address this problem please let me know

Click on the link below, and after that click on "Still need Help? Contact us."
Then on the next page, click Chat
There is also a phone option.
http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation

HT4097 i have tried to restore ipad and continously it gives an error code of 1604. i have also set ipad in recovery mode multiple times and everytime the restore shows an error code of 1604. How do I resolve this?

I was trying to update the iOS to version 6. The iPad was backed up and when trying to update the iOS 6 it errored with -1 error code. I set the iPad in recovery mode and tried to Restore it. It then gave an error code of 1604. I have tried the steps mentioned in the troubleshooting article for 1604 error and so far no luck restoring my iPad. Please help.

Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.

HT201263 i do all that but never get the dialog box. itunes doesnt recognize the ipad in any mod

still nothing. i get the connect to itunes but itunes still wont recognize the ipad in recovery mode or anything else

I tried to update the other day to OS 6.01, but it said I couldn't. I was away from my computer, so didn't worry about it. I thought I'd do it later. When I boarded the airplane, I shut down my ipad and then when I tried to turn it back on, I get the apple logo, then a flash and then the apple logo again. I have tried putting it into recovery mode, but it won't go. I push the home and power key to get it off, then press the home key while plugging it in via USB. I keep the home key pressed, but the Connect to Itunes never comes up. What do I do?
While connected, it goes from white apple to grey apple to black out flash and back to white apple about every minute or two.

HT1212 How do I perform step 5 in the Recovery Mode when an iPad minnie has been disabled for having more than the allowable entry attemps?

How do I perform step 5 in the Recovery Mode when an iPad minnie has been disabled for having more than the allowable entry attemps ?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

TS1368 HELP!!! After upgrading to IOS 6.13 my IPAD Stucks in a plug-in screen and the Itunes. When i Try to connect to iTUNES pop-up message apear "iTunes has detected an iPad in recovery mode.. You must restore this iPad before it can be used with iTunes

I have windows 8 enterprise OS and iTunes ver. 10.5.0.142. I was upgrading my iPad to IOS 6.1.3. After finishing the upgrade my iPad Reboot and currently stucked-up in a plug-in screen and iTunes Logo. When I try to connect it to the iTunes pop-up message appear saying " iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes." In short, I push the restore button then another pop-up message appear saying " The iPad software update server could not be contacted. Make sure your network settings are correct and your network connection is active, or try again later." I tried many ways but still no luck. I repeatedly reboot the iPad and open the iTunes still the same problem. I try also to uninstall the iTunes and installed the lower version but still the same problem, I even check the firewall if the ITunes was block or My privileges is administrator to run the iTunes or even reset my winsock but the problem still remain. PLEASE HELP! Thank you in advance!!!

Turn off your firewall and antivirus software.

Updating software came up with error now asking to connect to iTunes but when i do says ipad in recovery mode and must restore the ipad before connecting to iTunes ?

I was updating my daughters ipad last night to the latest operting system, when finished it came up with an error message, her ipad then went blank and came up with the picture to connect to itunes. But when I connect to itunes it comes up with the error message "itunes has detected an ipad in recovery mode. You must restore this ipad before it can be used with itunes" - can someone help with how I can do this

Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

Iphone 4 went into recovery mode when trying to restore, only option available now is to "restore and update" however this will not work, how can you restore from a backup once in recovery mode and only option is "restore and upgrade"? Please help!

iPhone 4 went into recovery mode when trying to restore it. Now the only option iTunes allows is for "restore & upgrade", it is not offer an option to restore from a backup, says that must first do the upgrade, when attempting to do the upgrade the iPhone won't accept it.
How can I restore from a back up in recovery mode when the only option is "restore and upgrade"?
Please help.

You don't you must restore your phone first and then you will have the option to restore from your backup.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

TS3694 Ipad won't turn on at all, and is recognized by itunes as being in recovery mode- when I try to restore it stalls on the portion stating "preparing device for restore" and on the page it says "itunes is restoring the software." Been like this for a

Ipad 4 won't turn on at all, and is recognized by itunes as being in recovery mode- when I try to restore it stalls on the portion stating "preparing device for restore" and on the page it says "itunes is restoring the software." Been like this for a day. I read the restore notes on apple, but this seems to be a little more unique than the standard recovery issues. Any ideas as to why I seem to keep stalling during the restore process?

Couple of things I can think of before going to the Apple store.
First, if you can, power off the iPad. Then connect it to the charger that came with the iPad and plug that into a known good wall outlet. Leave it there at least an hour then try to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart.
Also, you mentioned you have the latest iTunes. But it would be good to check the actual version. If the iPad is running iOS 7 you need iTunes 11.1 or later.

How can the Ipad leave recovery mode when something happened.

Similar Messages

Maybe you are looking for