How can the number of columns be frozen?

I'm entering data in a file where I'm satisfied with the current set of columns. I come to the last column and press the Return key. Despite the fact I've already "Frozen Header Columns" (Control click on the final desired column) the tab and return keys create an unwanted column. How can I prevent this action and go instead to the first column in the next row?
Appreciated.

Unfortunately, your "need" is not supported in iOS.
** Make use of "labels" in order to differentiate between the numbers of the same contact.

Similar Messages

How can the number of used computers used for itunes be updated? I had to reinstall itunes on a new hard drive

How can the number of computers used for an iTunes account be updated? I had to reinstall itunes on a new hard drive it and counted as an additional computer, against my 5 total computers.

wait until you reach the limit of five authorized machines. then, once a year, you will be able to deauthorize all machines, following which you can reauthorize those computers you currently use/have access to.
click here for more information.

How can the number of the contact can be displayed during calling or receiving a call I mean the number of the contact who's calling ?

I need to see the contact number who's calling me not only his name

Unfortunately, your "need" is not supported in iOS.
** Make use of "labels" in order to differentiate between the numbers of the same contact.

How to find the number of columns in an internal table DYNAMICALLY ?

Hi,
How to find the number of columns in an internal table DYNAMICALLY ?
Thanks and Regards,
saleem.

Hi,
you can find the number of columns and their order using
the <b>'REUSE_ALV_FIELDCATALOG_MERGE'</b>
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
   I_PROGRAM_NAME               = sy-repid
   I_INTERNAL_TABNAME           = 'ITAB'
   I_INCLNAME                   = sy-repid
changing
    ct_fieldcat                  = IT_FIELDCAT
EXCEPTIONS
   INCONSISTENT_INTERFACE       = 1
   PROGRAM_ERROR                = 2
   OTHERS                       = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif
now describe your fieldcat . and find no of columns.
and their order also..
regards
vijay

How do I set the number of columns for JTextPane

I only found a method setSize() of JTextPane class. How can I set the number of columns in a JTextPane? Each column can be written one letter.
Thanks.

You're not going to use FontMetrics to change the width of the characters; you're going to use it figure out how wide a single character is. Then multiply by the number of characters you want to have in a line, and presto! You know how wide to make your JTextPane.
Unless I've misunderstood your problem, of course.

How to get the number of columns in a result set???

hi everyone..
i am trying to establish a servlet applet communication....
my applet send the sql query to the servlet as serialised string and then the servlet executes the query...
Since i need to pass the result back to the applet, i thaught of passing the whole reult set to the applet..but that seems to be not possible..
so i thaught of storing my result set data in a vector and then pass the vector,but the first problem that i came across is that how to get the number of colums in a result set....
so is there a way to get the number of columns in a result set...???
and also i would like to know if it possible to send my whole result set to the applet bye serialization or by any method...???
thanx in advance

You shouldn't do. It expenses resources (you should always close the ResultSet and the Statement as fast as possible). Simply gently process it into a Collection or Map of DTO's. Those are serializable.

Pages: How can I sort one column of words and not have it affect the other columns?

How can I sort one column of words and not have it affect the other columns? I have opened the inspector to the edit columns and rows under Table. It will sort the column, but then it changes the other colums as well. I know that if I use Numbers, it will work, but I want to know how to do the same thing in Pages.

Hi Peter,
Numbers sorts full rows on values in selected column(s). The technique for sorting a single column is essentially the same as Jerry is describing for Pages tables—separate the (data in the) column to be sorted, sort it, return it to the table.
In Numbers the actual column may be separated from the original table, sorted, then returned. In Pages, the data must be extracted, sorted, then pasted back in, overwriting the unsorted data (if it was left in the original table).
iWork tables follow a database model in which each row is a Record, and each column holds a Field within the records.
As evidenced by the current question (and several similar questions arising in the Numbers community) that model doesn't apply to the way some users, especially some who come in from the MS Excel world, use tables.
With Excels model—islands of data on a single large table, the ability to sort one or a selected few columns of data makes sense. One 'island' may comprise only cells AA21:AH50. Sorting that small 'table' should be possible without disturbing the rest of rows 21-30, which are probably part of one or more other 'data islands' in the sea that is a MS Excel spreadsheet.
In Numbers, each of those 'islands' would be a separate Table, and that Table would be sortable without disturbing other Tables in the document.
Regards,
Barry

How do i change the number of columns within a text box? I need to go from three columns to one.

How do I change the number of columns within a text box? I need to go from 3 columns to 1. The insert column is highlighted and column break does not work for this.

Pages '09 does not seem to allow layout breaks in Textboxes.
Pages 5.2 has the same limitation.
Use multiple linked Textboxes in Pages '09 to get the layout you want or create your layout in a Word Processing template in the document layer.
Peter

How can I access docs on a frozen Pages app? The Pages app froze up after attempted repair at the Genius bar last night. The IPAD was having significant memory errors, and staff backed it up to the ICloud, then wiped the IPAD clean and restored the apps.

How can I access documents on a frozen Pages app? The Pages app on my IPAD does not function after the IPAD was backed up on the ICloud, and then restored. I synced the IPAD, but this did not solve the problem. Other apps are working, just not Pages. Please help! These docs are badly needed for work. Thanks so much!

Have you tried closing the Pages app completely and seeing if it works ok when you re-open it ? From the home screen (i.e. not with Pages 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Pages app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

How can we get Dynamic columns and data with RTF Templates in BI Publisher

How can we get Dynamic columns and data with RTf Templates.
My requirement is :
create table xxinv_item_pei_taginfo(item_id number,
Organization_id number,
item varchar2(4000),
record_type varchar2(4000),
record_value CLOB,
State varchar2(4000));
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'USES','fever','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'HOW TO USE','one tablet daily','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'SIDE EFFECTS','XYZ','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'DRUG INTERACTION','ABC','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'OVERDOSE','Go and see doctor','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'NOTES','Take after meal','TX');
select * from xxinv_item_pei_taginfo;
Item id Org Id Item Record_type Record_value State
493991     224     1265-D30     USES     fever     TX
493991     224     1265-D30     HOW TO USE     one tablet daily     TX
493991     224     1265-D30     SIDE EFFECTS     XYZ     TX
493991     224     1265-D30     DRUG INTERACTION     ABC     TX
493991     224     1265-D30     OVERDOSE      Go and see doctor     TX
493991     224     1265-D30     NOTES     Take after meal     TX
Above is my data
I have to fetch the record_type from a lookup where I can have any of the record type, sometime USES, HOW TO USE, SIDE EFFECTS and sometimes some other set of record types
In my report I have to get these record typpes as field name dynamically whichever is available in that lookup and record values against them.
its a BI Publisher report.
please suggest

if you have data in db then you can create xml with needed structure
and so you can create bip report
do you have errors or .... ?

How Can I get multi column values from dynamic search help?

Hi Gurus;
I'm using dynamic search help in my program.
I want to get multi column values from search help. But I dont know solution for this issue.
I'm using F4IF_INT_TABLE_VALUE_REQUEST FM.
How Can I get multi column values from dynamic search help?
Thanks.

Believe it or not, the same FM worked for me in a dynpro. I will try to explain here how it works in custom screen and then you can do your work for other screens or program types. I am not going to write my actual work but will explain in general.
I have 4 fields (FLD1, FLD2, FLD3, FLD4) and i made the search based on FLD2 and when user click on a line (could be any field), then this would bring the line on to the screens.
There are like 3 steps.
You have your value_tab for my fields FLD1, FLD2, FLD3 and FLD4. This is just the data that we pass into the FM. (data: IT_VALTAB type table of ZVAL_TABLE)
Next map the screen fields into an internal table (data: It_dynpfld type table of dselc ). I also have other internal tables defined (just to keep it straight, i will be putting here) data: It_return type standard table of ddshretval.
Next step is to call the function module. Make sure you have values in IT_VALTAB.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
        retfield        = 'FLD2'
        value_org       = 'S'
      tables
        value_tab       = It_VALTAB
        return_tab      = It_return
        dynpfld_mapping = It_dynpfld
      exceptions
        parameter_error = 1
        no_values_found = 2
        others          = 3.
    if sy-subrc <> 0.
      message id sy-msgid type sy-msgty number sy-msgno
      with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    else.
      perform get_selected_fields tables It_return.
    endif.
The code within the perform GET_SELECTED_FIELDS - We need to map the result fields after user selects it. The code goes like this. This is step is to update the dynpro fields.
I need a internal table as well as a work area here. like,
data: lt_fields type table of dynpread,
        la_fields type dynpread.
field-symbols: <fs_return> type ddshretval.
so fill out LT_FIELDS from the IT_RETURN table
loop at lt_return assigning <fs_return>.
    la_fields-fieldname = <fs_return>-retfield.
    la_fields-fieldvalue = <fs_return>-fieldval.
    append la_fields to lt_fields.
    clear: la_fields.
endloop.
Call the FM to update the dynpro
call function 'DYNP_VALUES_UPDATE'
    exporting
      dyname               = sy-repid
      dynumb               = '1002' "This is my screen number. You could use 1000 for selection screen (hope so)
    tables
      dynpfields           = lt_fields
    exceptions
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      undefind_error       = 7
      others               = 8.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
good luck

How can I make a column of sums out of a repeating pattern of 24 changing numbers

How can I make a column of sums out of a repeating pattern of 24 changing numbers in Numbers.
I have a long list of 8760 numbers of which I need to take the sum (and store in a column) of each 24 numbers.

Here's one way. I've reduced the example, taking groups of five numbers from a set of 20. I've used 3 as the data number in all cases to make the sum easily recognizable.
Original column of numbers in Data::column A.
Data::B2 (and filled down): =QUOTIENT(ROW()+3,5)
This adds 3 to the row number, then divides by 5, returning the quotient and ignoring the remainder.
The result is a 'group number' for each group of five rows.
Sums of each group are reported in the Sums table.
Sums::A2 (and filled down): =ROW()-1
Sums::B2 (anf filled down): =SUMIF(Data::$B,A2,Data::$A)
For your example, assuming the 8760 numbers are listed in column A of a table named Data, starting at cell A2:
Add a second column to the table (column B).
In B2 enter the QUOTIENT formula above, with these two revisions:
=QUOTIENT(ROW()+22,24)
Fill down to all cells in the column.
Provided you have named the first table "Data", both formulas in the Sums table will be as written above. You will need to extend the Sums table to 366 rows (including the Header row) to accommodate all 365 groups of 24.
Regards,
Barry
PS: For details on the functions used, see the iWork Formulas and Functions User Guide. You can download the guide via the Help menu in Numbers '09.

How to count number of columns in cross-tab report

I have created a cross-tab report and have managed to get the data out as below:
             Jan     Feb     Mar....(display of months will auto expand) Avg/Mo Total
UserA     4          3        4                                                                         11
UserB     6          1        1                                                                          8
UserC     5          5        5                                                                         15
Total       15        9        10                                                                        33
I want to insert a calculated column (Avg/Mo) into the cross-tab report based on the formula: Total/Number of Months. I used this calculation formula for Avg.Mo column:
(GridValueAt(CurrentRowIndex, CurrentColumnIndex+1, CurrentSummaryIndex)/GetNumColumns)
However, I get the wrong average since GetNumColumns count the total number of columns including the column of Avg/Mo and Total.
How do i get the number of columns, excluding the Avg/Mo calculated column and Total column?
PS: I can't use hardcode since the number of months/columns will auto expand the months progress...
Edited by: jutamind on May 26, 2010 9:27 AM

ok managed to solve this by slightly changing the formula:
GridValueAt(CurrentRowIndex, CurrentColumnIndex+1, CurrentSummaryIndex)/(GetNumColumns-2)

How to restrict number of column exposed by xsoData service at runtime

Hi All,
I have created one xsoData service over calculation view (imported one BW cube).
I want to expose few characteristics of cube and a key figure.
I want to decide this key figure at run time,means if i have say three key figures say quantity, cost and revenue apart of my characteristics.
when i run this service, i should be able to pass key figure name for which i want to see data.
Can i have a variable for column name for this purpose and how i can pass it its value ?
Please suggest.
Regards,
Rohit

Hi Thomas,
Thanks for the reply.
I have already used to restrict the number of columns using 'WITH' keyword.
Say there are 10 characteristics and 10 keyfigures in my calculation view.
Out of which i have exposed 3 chars and 3 KFs using 'WITH' keyword, for keyfigures i want to have one variable or placeholder in my xS ODATA service whose value i want to pass from UI( through XS service URL).
So my service should fetch 3 Characteristics and a keyfigure say qty or cost or revenue.
Please let me know if anything is still not clear.
Regards,
Rohit

How can find out LONG column database?

Hi,
in my database ORA-1461 error occured
01461, 00000, "can bind a LONG value only for insert into a LONG column
how can find out LONG column in my database ?

DESCRIBE
The description for tables, views, types and synonyms contains the following information:
each column's name
whether or not null values are allowed (NULL or NOT NULL) for each column
datatype of columns, for example, CHAR, DATE, LONG, LONGRAW, NUMBER, RAW, ROWID, VARCHAR2 (VARCHAR), or XMLType
precision of columns (and scale, if any, for a numeric column)
Extract of the link;
http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/ch12019.htm#SQPUG040
Secondly with reference to the error;
Do not try to insert LONG datatypes into other types of columns.
Hope this helps.
Adith

How can the number of columns be frozen?

Similar Messages

Maybe you are looking for