How can the number of the contact can be displayed during calling or receiving a call I mean the number of the contact who's calling ?
I need to see the contact number who's calling me not only his name
Unfortunately, your "need" is not supported in iOS.
** Make use of "labels" in order to differentiate between the numbers of the same contact.
Similar Messages
-
Hello .. How can i Display my camera in iMac ?
Hello .. How can i Display my camera in iMac ?
Do you mean how to use the built in iSight camera, or how to hook up your external digital camera?
-
How can i display the Number instead of E
Hello Everyone ;
I am getting confused. How can i display the Number but the Exponential value is coming as E.
SQL> select sum(amount_sold) from sales;
SUM(AMOUNT_SOLD)
1.1287E+11
Table details ..
SQL> desc sales
Name Null? Type
AMOUNT_SOLD NUMBER
i want to change 1.1287E+11 to "numeric"
DB : 10.2.0.4
os : rhel 5.1Just a minor correction on an obvious math/responding too fast error: 1.1287E+11 is a 12 digit number. You move the decimal 11 positions to the right which would add 7 zeroes to the value.
MPOWEL01> l
1 select length(to_char(1.1287E+11)), to_char(1.1287E+11,'999,999,999,999'), 1.1287E+11 "TEST"
2* from sys.dual
MPOWEL01> col TEST format 999999999999
MPOWEL01> /
LENGTH(TO_CHAR(1.1287E+11)) TO_CHAR(1.1287E+ TEST
12 112,870,000,000 112870000000the problem was that the OP failed to alias the sum result to the formatted column rather than the lenght of the data.
HTH -- Mark D Powell -- -
Hello guys I have a question,or rather a problem. how can I detach yourself iPhone operator Verizon USA? I mean as to call and what to say? I live in Ukraine, and the opportunity came up for to buy cheap 4S 16GB. but on Verizon. when I insert the original SIM card Verizon and I try to activate, says: (error occurred activation, if this problem happen again please call at +1................). this is the hour to use it through the R-SIM 9 pro. everything works нормальнои calls and Internet and SMS, but I want to officially unlock. beforehand thank you
Well, you managed to find this support forum didn't you and you have an internet connection don't you? Then if you have all these things, go and find the number by going to the Verizon website and it should not be hard to find the number.
As for speaking English, this is not really our problem and it is surely something that you should have thought about before buying the phone in the first place.
You also need to know that Verizon in the US is a cdma operator and if you purchased an iPhone 4s, then it should not be locked. The Verizon 4s comes with a sim card tray that should be unlocked out of the box for use internatinoally on gsm networks, so all you should need to do is open the sim card tray and insert a sim card and you should pick up the local gsm network.
A cdma phone does not actually use a sim card, so there would be no original sim card with the phone because when it is used in the US it will pick up the Verizon cdma network without a sim card. The sim card is only for use on a gsm network which will not work in the US, but is designed to work outside the US. Open the sim card tray and insert your own local sim card and the phone should work and should not be locked.
Other than this, if you purchased the phone in the first place, it is the responsibility of the previous owner to cancel the Verizon contract. This is nothing to do with you, so contact the seller and ask them.
Other wise, go to the Verizon website and look up the number and call them. As they are the phone company, ultimately, they are the only ones who can help you. -
How can i display the days of the month in my report, please help
dear all
my table name is day_close_table
it contains these columns:
product_code number,
the_date date,
sale_qty number,
buy_qty number
price number
i need to make report like the fiollowing
product : 10144 from: 1-jan-2006 to :10-jan-2006
days | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
Sale | 50| 10| 20| 15|10|5 | 6 | 11|12|6 |
buy |10 | 20 | 10| 0 | 0 | 0 | 10| 1 | 1| 1|
i created two query and i decieded to join them
the first one is to display days in horizon direction
my query is:
SELECT TO_CHAR(THE_DATE,'DD-MONTH')D,
FROM HS_DAY_CLOSE;
my question is how can i display the records in horizone direction
please helpi solved this problem using this query
SELECT STOCK_CODE, COUNTRY_ID,
SUM(DECODE(to_char(the_date,'dd') ,'01', buy_qty)) "1",
SUM(DECODE(to_char(the_date,'dd') , '02', buy_qty)) "2",
SUM(DECODE(to_char(the_date,'dd') , '03', buy_qty)) "3",
SUM(DECODE(to_char(the_date,'dd') , '04', buy_qty)) "4",
SUM(DECODE(to_char(the_date,'dd') , '05', buy_qty)) "5",
SUM(DECODE(to_char(the_date,'dd') , '06', buy_qty)) "6",
SUM(DECODE(to_char(the_date,'dd') , '07', buy_qty)) "7",
SUM(DECODE(to_char(the_date,'dd') , '08', buy_qty)) "8",
SUM(DECODE(to_char(the_date,'dd') , '09', buy_qty)) "9",
SUM(DECODE(to_char(the_date,'dd') , '10', buy_qty)) "10",
SUM(DECODE(to_char(the_date,'dd') , '11', buy_qty)) "11",
SUM(DECODE(to_char(the_date,'dd') , '12', buy_qty)) "12",
SUM(DECODE(to_char(the_date,'dd') , '13', buy_qty)) "13",
SUM(DECODE(to_char(the_date,'dd') , '14', buy_qty)) "14",
SUM(DECODE(to_char(the_date,'dd') , '15', buy_qty)) "15",
SUM(DECODE(to_char(the_date,'dd') , '16', buy_qty)) "16",
SUM(DECODE(to_char(the_date,'dd') , '17', buy_qty)) "17",
SUM(DECODE(to_char(the_date,'dd') , '18', buy_qty)) "18",
SUM(DECODE(to_char(the_date,'dd') , '19', buy_qty)) "19",
SUM(DECODE(to_char(the_date,'dd') , '20', buy_qty)) "20",
SUM(DECODE(to_char(the_date,'dd') , '21', buy_qty)) "21",
SUM(DECODE(to_char(the_date,'dd') , '22', buy_qty)) "22",
SUM(DECODE(to_char(the_date,'dd') , '23', buy_qty)) "23",
SUM(DECODE(to_char(the_date,'dd') , '24', buy_qty)) "24",
SUM(DECODE(to_char(the_date,'dd') , '25', buy_qty)) "25",
SUM(DECODE(to_char(the_date,'dd') , '26', buy_qty)) "26",
SUM(DECODE(to_char(the_date,'dd') , '27', buy_qty)) "27",
SUM(DECODE(to_char(the_date,'dd') , '28', buy_qty)) "28",
SUM(DECODE(to_char(the_date,'dd') , '29', buy_qty)) "29",
SUM(DECODE(to_char(the_date,'dd') , '30', buy_qty)) "30",
SUM(DECODE(to_char(the_date,'dd') , '31', buy_qty)) "31"
FROM HS_DAY_CLOSE
GROUP BY STOCK_CODE,COUNTRY_ID -
How can I display the rows into columns.
How can I display the rows into columns. I mean
Create table STYLE_M
(Master varchar2(10), child varchar2(10));
Insert itno style_m
('MASTER1','CHILD1');
Insert itno style_m
('MASTER2','CHILD1');
Insert itno style_m
('MASTER2','CHILD2');
Insert itno style_m
('MASTER3','CHILD1');
Insert itno style_m
('MASTER3','CHILD2');
Insert itno style_m
('MASTER3','CHILD3');
Note : The Master may have any number of childs.
I want to display like this..
Master child1, child2, child3, .......(dynamic)
MASTER1 CHILD1
MASTER2 CHILD1 CHILD2
MASTER3 CHILD1 CHILD2 CHILD3
Sorry for disturbing you. Please hlp me out if you have any slution.
Thanks alot.
Ram DontineniHere's a straight SQL "non-dynamic" approach.
This would be used if you knew the amount of children.
SELECT
master,
MAX(DECODE(r, 1, child, NULL)) || ' ' || MAX(DECODE(r, 2, child, NULL)) || ' ' || MAX(DECODE(r, 3, child, NULL)) children
FROM
SELECT
master,
child,
ROW_NUMBER() OVER(PARTITION BY master ORDER BY child) r
FROM
style_m
GROUP BY
master
MASTER CHILDREN
MASTER1 CHILD1
MASTER2 CHILD1 CHILD2
MASTER3 CHILD1 CHILD2 CHILD3 Since you said that the number of children can vary, I incorporated the same logic into a dynamic query.
SET AUTOPRINT ON
VAR x REFCURSOR
DECLARE
v_sql VARCHAR2(1000) := 'SELECT master, ';
v_group_by VARCHAR2(200) := 'FROM (SELECT master, child, ROW_NUMBER() OVER(PARTITION BY master ORDER BY child) r FROM style_m) GROUP BY master';
v_count PLS_INTEGER;
BEGIN
SELECT
MAX(COUNT(*))
INTO v_count
FROM
style_m
GROUP BY
master;
FOR i IN 1..v_count
LOOP
v_sql := v_sql || 'MAX(DECODE(r, ' || i || ', child, NULL))' || ' || '' '' || ';
END LOOP;
v_sql := RTRIM(v_sql, ' || '' '' ||') ||' children ' || v_group_by;
OPEN :x FOR v_sql;
END;
PL/SQL procedure successfully completed.
MASTER CHILDREN
MASTER1 CHILD1
MASTER2 CHILD1 CHILD2
MASTER3 CHILD1 CHILD2 CHILD3I'll point your other thread to this one. -
How can I display & split the audio & video from the same digitized clip?
I digitized a scene into iMovie that I edited on a professional system which I don't have access to anymore. The whole scene is 1 clip. Now I see a few tweaks that I want to make, so I was hoping to do them in iMovie.
I want to "pull up" the audio in one section - meaning I want to take cut about 20 frames of audio from the end of a shot, and then move all the other audio up to fill the hole. To compensate for the missing 20 frames, I'll cut video off the head of the next shot. Some call this prelapping. Some call it an L-cut. Some call it asymmetrical trimming. Either way, I can't figure out how to do it in iMovie.
My clip appears in the timeline as one track - a single track that contains the video and 2 audio tracks. How can I display the audio that's tied to the video on its own track? Then I think I could split audio & video wherever I wanted and trim things up - but I can't figure out how to do it.
Am I asking too much of this software?
BTW, I never see the option to "Split audio clip at playhead". I'm not displaying clip volume or waveforms. Choosing to display waveforms doesn't show me anything. Maybe iMovie thinks I'd only want to see waveforms of audio that isn't tied to my video-and-audio clips?
Thanks in advance for any help...Jordon,
"Am I asking too much of this software?"
No, you're not.
You first want to select your clip(s) and choose Advanced>Extract Audio.
This will copy the audio from the video clip and place it on one of the two separate audio tracks while lowering the audio level to zero in the original video track.
You can now edit and move the audio independently of the video.
With the audio clip selected, you'll find you now have access to Edit>Split Selected Audio Clip at Playhead.
Matt -
How can i display a list of all the names stored in the Mail app?
When sending an email, the program shows a list of names according to the first and subsequent letters that I type into the To: field. There are times I cannot recall someone's email user name. How can I display a complete list of all the names Mail has stored? I know that I can go to the To: field then type in the letter A, then write down all listings under A, and then repeat for each letter of the alphabet, but there should be an easier method.
I have perhaps dozens of names in Mail, but only five names in Address Book, so the latter does me no good.On the menubar, Mail > Window > Previous Recipients
Regards,
Captfred -
How can i display all the query items to a table?
how can i display all the query items to a table in a jsp file?
i always have an out of memory error..any body??any idea?
is it possible thru configuration or i have to write a program by the abaper??
Biswa -
I like the bookmarks on the left side of the screen. I don't want to be navigating through a tree of all of my various bookmarks. How can I display all of my bookmarks along the left side of my browser window like earlier versions of Firefox?
View > Sidebar > Bookmarks (Ctrl+B)
Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily if the Menu Bar is hidden.
*https://support.mozilla.com/kb/how-do-i-use-bookmarks -
How can I display all my e-mails on all my Apple products? Only some of them show up now...thanks to an apple representative in the apple store. Also, he put my oldest emails in POP (???)
How can I display all my e-mails on all my Apple products? Only some of them show up now...thanks to an apple representative in the apple store. Also, he put my oldest emails in POP (???)
-
How can i display a portlet in the Edit view only ?
Dear All,
I'm developing a portal in which the end user can change the content of the portal page (personalize) using Edit smart link and i ask How can i display a portlet in the Edit view only ? not shown in the production view ?Last time I heard with Oracle they said the only way is to look at the current URL. If it contais _mode=16 then we are in edit mode.
This is a function I use:
FUNCTION inEditMode return boolean is
bEdit boolean := false;
begin
if PORTAL.wwpro_api_parameters.get_value('_mode', 'qaz') = '16' then
bEdit := true;
end if;
return bEdit;
end inEditMode;
Kind regards
Tomas Albinsson
Stockholm, Sweden -
How can I display the data in table in separate column?
I have a vi reading data one by one in the same column.
How can I display the data with separate column?
like this:
data 1 | read | read
data 2 | read | read
data 3 | read | read
(would you mind if I will ask for an example
because it is much easier for me to work
with an example)
THANK YOU.If you're reading your data in as a 1D array, this is as simple as using the Reshape Array to make a 2D array. I've attached an example in LabVIEW 6.1 format. The example rearranges a single column of data fill several columns horizontally, but you can easily modify this code to fill the columns downward instead.
Attachments:
Data_Column_Example.vi 18 KB -
I can successfully view and control a VI remotly. However, the remote VI dinamically loads another VI, this VI loaded dinamically is a VI that allows open others VIs, I want to see the files that contains the server machine, in the client machine, but the front panel of the dinamic VI appears only on the server and not on the client, How can I display the fron panel with the files of the server machine of the dinamically loaded VI on the client computer?
Attachments:
micliente.llb 183 KB
miservidor.llb 186 KB
rdsubvis.llb 214 KBI down loaded your files but could use some instructions on what needs run.
It seems that you are so close yet so far. You need to get the data on the server machine over to the client. I generally do this by doing a call by reference (on the client machine) of a VI that is served by the server. THe VI that executes on the server should pass the data you want to diplay via one of its output terminals. You can simply wire from this terminal (back on the client again) to an indicator of your choosing.
Now theorectically, I do not think that there is anything that prevents use from getting the control refnum of the actual indicator (on the server) of the indicator that has the data, and read its "Value" using a property node. I have never tried this idea but it seems t
hat all of the parts are there. You will need to know the name of the VI that holds the data as well as the indicator's name. You will also have to serve all VI's. This is not a good idea.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
How can I display the range for LastFullMonth in the header of a report
How can I display the month for LastFullMonth in the header of a report run in the past so that a report that ran sept 1 2009 selecting data for LastFullMonth (august 2009) displays sept 2009 in the header even if there is no data selected by the report?
Good,
Sometimes I answer these questions and completly miss it....
( lack of understanding on my part )
Maybe you are looking for
-
Workflow Notification missing field that was retrieved using RFC
Hi, We create a dispute case from out r3 system in transaction FBL5N. This create a dispute case in the FSCM System and an event is created which initiates a workflow. This workflow sends a notification mail to the person responsible informing them
-
Error when running weblogic.appc
We have been running weblogic.appc for quite some time for precompiling our war-files. A few days ago we have been getting errors when precompiling one of our applications (it worked fine just a week ago). We build the war files using the same build
-
cannot restore phone since update. I tried to upload to itunes but itunes isnt picking it up. Phone is frozen with Itunes icon and the usb cord. I tried some suggestions posted but it is still not restoring does anyone know how this can be fixed???
-
hi Masters, i have an input screen fields moreover 90... so the most i can place on screen (input screen fields ) may be 50 or 60. NOW : My concern is.....is their scrolling option where by i can scroll all the fields in single screen? Thanks in adva
-
Bash update (4.2.045-5 - 4.3-2) wipes history?
Rebooted shortly after updating bash, this morning. After the reboot, the bash history of both user accounts (root and my account) was wiped, and nothing's being written to the history files, despite having "shopt -s histappend" in /etc/bash.bashrc.