How can the process of pir creation be stopped while creating PO

hi all,
         We  have a requirement of stopping PIR crreation during PO creation.Any pointers for the same is highly appreciated.It's quite urgent.
Regards,
Rajashree

Hi,
Welcome to the FORUM.
Yes It should be possible. as follows:
As you are Maintaining Serial Number profile, you would have assigned to Material Master , in that there is an option to check for automatic Equipment creation, so when you make delivery with serial No. you mention Serial No. in "Extras" > Serial No. Field. (in VL01N), In the Display Box after entering the serial no. Please check the "Eqpt" Box, This enables you to get equipment created automatically, then you do PGI, billing.
So We can control w.r.t Serial No. for the Equipments at Sales order level, or even at Delivery level.
Now In order to Update your equipment details you try with "LSMW" use either "VA01u201D (Ref, Sales order) or "VL01N" (Ref. Delivery Doc.)  Here you do proper Field Mapping for the required sales details including Serial No.s etc.
Hope this should work out.
Regards
DSR
Edited by: D.Srinivasa Rao on Nov 24, 2011 2:11 PM

Similar Messages

  • How can I process a linearly converted raw file while preserving color?

    Hi,
    I want to convert my raw files in a linear format (to preserve all the dynamic range and detail and prevent unnecessary clipping). My question is "how can I modify the brightness or luminance while preserving the hue and saturation of every color?"
    As for applying the gamma curve, I guess the best and only way in Photoshop is to create a Levels adjustment and place a 2.2 in the middle (gray) input box. However, I read in http://www.luminous-landscape.com/tutorials/hybrid-conversion.shtml that a 4.75 value should be used... Why? Is the number placed there not correspond to the gamma being applied?
    Thanks in advance.
    Juan Dent
    P.S.: getting colorimetrically accurate color from the camera, through all the manipulations in Photoshop is for me crucial. Any pointers as to what to do and what to avoid?

    First of all, you should have used the Adobe DNG Converter 8.6, not an old, obsolete version.  Always use the very latest version.  8.3 was simply the first ACR version to support your camera model, that's all.
    Note that the DNG Converter works only on folders, not on individual raw files.  Put all your Sony raw files in a folder and run the Converter on that folder containing the raw files.
    I have absolutely no clue as to what on Earth you mean by : "upon reading the memory chip from Photoshop CS5".
    You also need to make sure that CS5 is fully updated.  You cannot rely on the highly and notoriously unreliable Adobe auto updater to tell whether you have the latest update installed or not.
    I still have no idea what platform you are on, Mac or Windows. Please read the following for next time:
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them, etc.,
    someone may be able to help you (not necessarily this poster).
    A screen shot could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • APO DP release( PIR) sent to snp, how can i process snp hueristic.

    Hi scm gurus,
    APO DP release( PIR) sent to snp, how can i process snp hueristic.
    for Ex:APO DP starting MPOS-SBP-PA-PB-UFP-IDP like this.
    In APO SNP hueristic what is the process, can u explain me.
    Thx,
    PRASAD

    Hi scm gurus,
    APO DP release( PIR) sent to snp, how can i process snp hueristic.
    for Ex:APO DP starting MPOS-SBP-PA-PB-UFP-IDP like this.
    In APO SNP hueristic what is the process, can u explain me.
    Thx,
    PRASAD

  • How can we process the CRM Order again for second time in debugging mode

    Hi,
    Can anybody please tell me how can we process the CRM ORDER for second time.  that I want to process in debugging mode.
    Thanks,
    bsv

    Hi bsv,
    Are you trying to reprocess a BDOC for debugging purpose?
    If the BDOC is not with a final status, you will be able to reprocess it using the reprocess button in the smw01 search result list.
    And you may put /h on the popup when you click on the 'reprocess' button.
    If it is allowed to make some changes in the CRM ORDER for testin purpose, it would be easier to perform debugging.
    A more 'careless' way is to deactivate the outbound or inbound queue in transaction smqs or smqr, then in smq1 or smq2 to locate the interested queue, and click on button 'debug LUW'.
    Hongyan

  • I have purchased an ex-corporate ipad air. it has come locked to the previous users ID. The purchase is from a reputable auctioneer of which receipts can be produced. How can i process the unlocking/deactivation of the previous apple ID.

    I have purchased an ex-corporate ipad air. it has come locked to the previous users ID. The purchase is from a reputable auctioneer of which receipts can be produced. How can i process the unlocking/deactivation of the previous apple ID.

    Unfortunately the situation as we understand it is that Apple will unlock phones locked by the original owner if they themselves provide proof of purchase. They will not unlock it at all for a subsequent owner who has bought it second-hand, however legitimately.
    The auction house have sold you an item which is not working as described and your argument is with them. They must take it back and refund your money. If as you imply the previous owner is absolutely not available then this phone is permanently unusable and there is no way whatever round that.

  • How can I process a Sony A7 RAW file into Photoshop CS5.

    How can I process a Sony A7 RAW file into Photoshop CS5.  I tried the file DNG converter 8.3, but it did not work.  I was able to download it, but upon reading the memory chip from Photoshop CS5, it reads the jpg files fine, but not the RAW files.  I thought the DNG converter 8.3 was the right file, but apparently it is not.  Perhaps I need to do something in Photoshop CS5 to initiate it, or place it in a particular directory.. Please help.

    First of all, you should have used the Adobe DNG Converter 8.6, not an old, obsolete version.  Always use the very latest version.  8.3 was simply the first ACR version to support your camera model, that's all.
    Note that the DNG Converter works only on folders, not on individual raw files.  Put all your Sony raw files in a folder and run the Converter on that folder containing the raw files.
    I have absolutely no clue as to what on Earth you mean by : "upon reading the memory chip from Photoshop CS5".
    You also need to make sure that CS5 is fully updated.  You cannot rely on the highly and notoriously unreliable Adobe auto updater to tell whether you have the latest update installed or not.
    I still have no idea what platform you are on, Mac or Windows. Please read the following for next time:
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them, etc.,
    someone may be able to help you (not necessarily this poster).
    A screen shot could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Once PO is released against a PR, how can the PR be deleted or modified by

    Once PO is released against a PR, how can the PR be deleted or modified by the Requisitioner. Any / deletion of a PR,
    Note: Our Req No one Can PR delete if it have converted in po,

    hI,
    Note 521174 - ME52N: Deletion of a PReq despite PO
    Check this note is applicable or not at your end
    Summary
    Reason and Prerequisites
    You create a purchase requisition and a purchase order is generated from it. Afterwards, you change the purchase requisition by setting the deletion indicator. The system generates a warning message that a purchase order already exists for this purchase requisition. However, the deletion of such a purchase requisition should be prevented. Therefore, the system should generate the error message 06152.
    Other terms
    ME52, 06152.
    Reason and Prerequisites
    The warning message does not suffice.
    Solution
    After you implemented the correction, you can set set the message via Customizing. If you customize the message as an error message, a deletion is no longer possible. However, the message is not output as an error message in order to block a further processing of the purchase order. This only appears as an information message.
    Regards
    Kailas Ugale

  • How can one process "ask" if another process is running?

    Hi there,
    This is a very general question: how can one process "ask" if another process is running?
    In other words, what 2 process share together.
    Thanks for any help.

    This code will print all active Threads.
    Look at at the API docs for further information.
    ThreadGroup tg=Thread.currentThread().getThreadGroup();
            while(tg.getParent() != null)
                tg=tg.getParent();
            tg.list();

  • How can I process Raw Images taken with a Nikon D7000 in PS4  Extended?

    How can I process Raw Images taken with a Nikon D7000 in PSE Extended?

    Hi there
    Unfortunately, CS4 does not support the Nikon D7000. You'll have to download the Adobe DNG converter (links below) to process RAW files from your camera.
    DNG converter 6.3 - Mac
    DNG converter 6.3 - Windows
    Here are some answers to similar questions asked over in the Photoshop General discussion:
    If you need further information on this topic, please feel free to post in the Photoshop General Discussion or in the Camera Raw forum.
    Camera Raw | Supported cameras
    Camera Raw | compatible applications
    Cheers,
    Kendall

  • How can I process raw files in Aperture from a Sony RX1?

    How can I process raw files in Aperture from my Sony RX1?

    Here is a list of supported cameras
    <http://www.apple.com/aperture/specs/raw.html>
    Your Sony RX1 is not listed. Your best bet would be to use the software, that came with your camera to convert the raw files to tiff and to import the tiff to Aperture. Or to shoot raw+jpeg and to import the pairs and to work with the jpeg versions as original master files, until Aperture supports your camera.
    Regards
    Léonie

  • How can I  process raw files from lumix GH4 on photoshop elements 12?

    How can I  process raw files from lumix GH4 on photoshop elements 12?

    Your files should open in photoshop elements 12, since there is only one version of camera raw 8.5
    (RC means a release candidate of 8.5, which came before the final version of camera raw 8.5 and was for testing)
    In the pse 12 editor if you go to File>Open and select one of the lumix GH4 and then press Open, what happens?
    In the pse 12 editor, if you go to Photoshop Elements>About Plug-in and click on the words Camera Raw, what version does it say?

  • I want to give away or sell a 6500/250 running 7.6.1. How can the hard disk be erased so that the data are gone, not recoverable? thanks, LifeisRich

    I want to give away or sell a 6500/250 running 7.6.1. How can the hard disk be erased so that the data are gone, not recoverable? thanks, LifeisRich

    I'd recommend that you check for Mac User Group(s) in Orange County.  That's where you'd likely find a diehard Mac fanatic who might want to add your 6500 to his/her collection.  Even if you got nothing for it, it would be better than e-cycling it.  I upgraded my 6500/275 with what was a "large" hard drive at the time (15 GBs), maxed the memory at 128 MBs, installed the 512K L2 cache card, a better ATI Rage Pro PCI graphics card, a USB PCI card, and an internal 56K modem.  With it running OS 9.1, it did all of the pre-OS X stuff I needed it to do.  As I previously mentioned, it's a nice-sounding MP3 player.  Internet Explorer 5.1.7 (the final release from 2001) kept it useful for surfing the web up until 2005, when it became too outdated/incompatible with many web sites.  Unfortunately, the demands of the internet and the need for a modern browser, as well as faster processing to digest it all, are what retired many older Macs from active duty.  So my (2) 6500s and (3) 6400s (same tower design) sit in storage.  There is one concern that I'll pass along: The motherboard has a 4.5-volt alkaline battery, that's a small, black plastic cube, secured in place by velcro.  If your 6500 has been disconnected from electricity for a long time, the battery will undoubtedly be dead.  Unlike the many Apple computers that used a small ½AA lithium battery (that I've never seen leak when completely dead), the 6500's battery can and usually does start leaking.  Because the motherboard sits vertically oriented on its side edge when installed, the leaking battery will drip alkaline solution down the board, corroding any components in it path.  I've seen motherboards ruined from this.  If you're going to give it away or sell it, you might want to pull the motherboard (remove the two machine screws on the rear I/O panel, next to the pull tabs).  Slide out the board and unplug the battery's small connector (has red & black wires), then lift up on the battery, while holding down the "toothed" velcro mount with something non-conductive, like a popsicle stick.  Once it's free, dispose of the battery.  If you're interested, a replacement can be purchased for about $5-$7 from battery specialty retailers - it's a Rayovac 870 or 871.  Even if you don't replace it, removing one that will eventually leak is a good idea, (hopefully) before any damage is done. 

  • How can the ruler and or the measurement tool calibrated? both are totally off.

    how can the ruler and/ or the measurement tool calibrated? both are totally off by various margins.

    skn1868 wrote:
    do you know how to reset the ppi so it is accurate?
    Earlier, I wrote:
    What is the ppi value in the document?  Use the Image - Image Size menu to see or set this value.
    I can't believe this conversation has gone on this long.  You keep wanting it to be a bug, but it seems to me the basic problem here is that you haven't accepted the fact that YOU are responsible for getting the image metadata in order before you can use tools like the Ruler to read out in physical units, such as inches or centimeters, accurately.
    Photoshop can only know the size of things in your document if you or your workflow provide it an accurate ppi value!
    What's the original source of the material?  A scanner?  If so, some part of the scanning or image preparation process has left you with an inaccurate ppi value.
    For the documents you're already working with, use Image - Image Size, then UNcheck the Resample Image checkbox and type in the correct ppi value.  Then everything will work.
    -Noel

  • How can I process pics in Lightroom that  have uploaded from my IPad?

    How can I process pics in Lightroom that I have uploaded from my IPad? I have managed to copy pics from the IPad into a file located in My Lightroom Pictures (and located on an external Hard Drive), which is where I put all my pictures. I an see the file in Finder and can even work with them as a Project in IPhoto, but nothing happens in Lightroom.

    Hi johnhb2,
    To import photos from your iPad into your Windows computer, I would suggest that you use the steps in this article -
    iOS: Import personal photos and videos from iOS devices to your computer
    http://support.apple.com/kb/HT4083
    Note that by default the pictures are placed in the “My Pictures” folder. Once imported you can see your photos there and use whatever application you want to view or manage them.
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • ICal 5: day view: how can the list on the left side be hidden?

    hi fellows
    how can the list on the left side in the day-view of iCal 5 be hidden, so that the computer-screen only shows the graphic-bars (right side)?
    Thanks a lot for your help
    Mullika

    Sorry, but there was nothing in your last post.

Maybe you are looking for