How can to debuging by ABAP mapping in XI

hello,
I loock for answer, is it possible to debuging, in method IF_MAPPING~EXECUTE,
Ilja

the classical way of debuggin in ABAP is not possible in  IM test part. But u can take the payload desing a program to accept the payload and debug.
Message was edited by:
        Prabhu  S

Similar Messages

  • How can i debug my abap program?

    hi. how can i debug my program?

    Hi,
    There are many ways to start debugger
    •     By clicking the Execute button and selecting the debugging mode.
    •     From the ABAP/4 editor, by executing a program choosing Program  Execute  Debugging from the menu.
    •     Setting breakpoint in the program
    Components of ABAP/4 debugger
    The debugger shows the program information using six different views.
    •     Fields: Displays the field contents.
    •     Table: Allows modifying the contents of internal table.
    •     Breakpoints: Displays list of Breakpoint in the Program.
    •     Watchpoints: Allows dealing with Watchpoints.
    •     Calls: System call status like Event, Form etc.,
    •     Overview: Presents the program structure, events, subroutines, and modules.
    •     Settings:  Displays the calling sequence within a particular event, up to the current breakpoint.
    All these options are shown in the following screen.
    Arrow indicates the breakpoint of the program i.e., where user has stopped the program.
    Breakpoints
    A breakpoint is the signal, which is specified in the program, tells the system to stop the program execution and to start the debugger.  Following types of breakpoint are available with ABAP/4:
    •     Static are set up with the BREAKPOINT keyword inside the program, which you can directly display with the ABAP/4 source code editor.  To set the breakpoint in the program enters the keyboard BREAKPOINT.
    •     Dynamic this breakpoint is not visible in the code.  Position the cursor over the source code line to have the breakpoint and then select utilities -  breakpoint -  set.  You can delete them or display them from breakpoint list.  Or you can execute the program in the ABAP/4 debugger i.e., in debugging mode.
    •     Watchpoints are field specific.  The program is stopped when the field reaches the value specified in the watchpoint.  Execute the program in debugging mode.  Position the cursor over the needed field.  Press the F button to get the view of field.  Select the checkbox for the needed watchpoint.  Click on the continue button.
    •     Keywords/events The program stops just before executing a specific event or keyword.  To set breakpoint at particular event, from initial screen of debugger, select Breakpoint  Breakpoint at  at event/at keyword.  Enter the name of the keyword or event.  Click on OK.
    Navigating through the breakpoint
    Following buttons are used to navigate through the program and debugger.
    •     Single step:  Executes a single program command.
    •     Execute:  Similar to the single step, but when a program calls a subroutine, it executes the whole subroutine unlike single step.
    •     Continue: Executes the program until it is finished or until it finds next breakpoint.
    •     Return:  Allows for executing the program instruction up to the end of a routine and stops in the line of code where the subroutine gives back control to the main program.
    •     Tables:  Switches the debugger to the table view.
    Displaying and modifying values
    Every time the program is stopped within a debugger, you can display and modify the contents of table field and fields.
    To display the fields, click on V and you can view the contents of system field, program field, ABAP/4 dictionary fields, and external program fields.
    Displaying and modifying internal tables
    When you click on the Table button from the initial ABAP/4 debugger screen, the system will display the table debugger view.  Here you need to enter the name of the internal table to be displayed.  You can modify or delete or add i.e., insert the internal table Contents.  These changes are applicable only for the debugging and do not affect the structure of internal table in the program.
    Reward.

  • Debug an abap-mapping

    Hi,
    how can I debug an abap-mapping?
    I cannot take the test-tool of Michal Krawczyk or SXMB_MAPPING_TEST, because I need the original payload of the mail-sender (with dynamic configurations and all payload-attachments).
    I have to debug it realy inside the intergration engine.
    ... but how can I set breakpoints to debug the mapping session?
    thanx a lot!
    regards
    Wolfgang Hummel

    In your SE80 settings you can define for which user you want to activate the external break point. maybe you will temporarily have to change the user type form service to dialog.
    if you are unsure about the user you can find out the user in your abap mapping program by reading sy-uname and then throw a type X message with userid as message parameter.
    Regards,
    Volker

  • How can I debug a routine created in Deletion of similar requests?

    Hello Experts,
    I need some help from you. I need to delete overlapping requests and the common
    settings you can set are not suitable, so I decided to write my own ABAP routine.
    But how can I debug a routine, which is implemented in the deletion of similar requests?
    Hope you can help me.
    Cheers
    Daniel Weilbacher

    Please go to the routine code..
    In the menu options..u will find an option for breakpoint--set..
    The line where breakpoint is set will get highlighted and u will also see a STOP symbol..
    then come out of routine..and then run the data load..
    this ABAP routine for overlapping request deletion runs before the scheduled data load..
    the run shud stop at the set breakpoint and show the routine code..in debugger mode..
    cheers,
    Vishvesh

  • How can we debug an SRM workflow problem?

    Q: How can we debug an SRM workflow problem?

    Hi,
    In SRM system using transaction SWI6 you can troubleshoot the workflow process.
    if you are using N step badi in the workflow process, we can debug the badi BBP_WFL_APPROV_BADI
    method GET_REMAING_APPROVERS
    if required please take a help of Abap consultant to debug...
    Thanks & Regards,
    prasad.s

  • How can i debug a rfc being called from sap

    hello Gurus,
    We made a RFC call from SAP r3 to sap grc nfe......we did not receive any data in sap grc .......we go to SM58 and there it gives
    the message "Name or password is incorrect (repeat logon)u201D.
    How can i find out where the data has stuck.
    Please help.
    BR
    Honey

    HI,
    please have a look at the link below..
    this may help u !!!
    [Re: how can i debug a rfc being called from .net connector (NCO) v2.0?;
    Best of Luck !!1
    Regards
    Ravi

  • How can I debug a sequence that has a subsequence is running in a separate thread?

    Hi,
    How can I debug a sequence that has a subsequence is running in a separate thread?
    I have to have a continues check for a  digital in signal to be able to terminate the sequence if a physical button is pushed.
    This is running in a separate thread, but this way I cannot debug the main sequence.
    Is there any workaround for this?
    Thanks,
    Andras

    This KB might help you:
    http://digital.ni.com/public.nsf/websearch/46D1E157756C37E686256CED0075E156?OpenDocument
    Let me know if this does not help.
    Allen P.
    NI

  • I updated my software for my Iphone and my maps disapperead. New maps provided by Apple or of significantly worse quality than my previous Googke maps. How can I get my Google maps back?

    I updated my software for my Iphone and my maps disapperead. New maps provided by Apple or of significantly worse quality than my previous Googke maps. How can I get my Google maps back?

    This app does it well, including StreetView
    http://itunes.apple.com/gb/app/ifindview-connect-to-facebook/id480510706?mt=8

  • How can we Debug the workflow?

    Hi,
    How can we debug the workflow?
    Please help  me on debugging the workflow in step by step procedure?
    Early reply is highely appriciable.
    Regards,
    Chow.

    Hi,
    If you want to set breakpoints in method which is used in workflow task then it is possible
    till ECC5 am afraid about ECC6
    you can see the graphical view of workflow through transactions said by Kalpesh
    you can also use swwl (delete workflow) for viewing the container elements of the workflow.
    SWI2_ADM1:Workitem without agents
    SWI2_DIAG:Workflow with error
    these transactions are also helpful
    Thanks & Regards
    Hari Sankar M

  • How can I debug webdynpro java application?

    hi,
    How can I debug webdynpro java application?
    Thanks

    Check this document
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0cb32c5-36a7-2910-2c9b-ba4a5bbdbb56
    Also check this sdn thread Re: DeBugginng The WebDynPro Application particularly shailesh kumar posting
    /padmanaban
    Edited by: Padmanaban on Sep 26, 2008 1:55 AM

  • How can I see in what maps some table is used?

    Hi,
    Anyone can tell me how can I see in what maps some table is used, without open all of then?
    Thanks,
    Gustavo.

    Good morning Gustavo,
    OWB has some public views defined which can provide you with this information. Check Appendix D (Warehouse Builder Public Views) of the OWB User Guide for all info.
    Log in as the owner of the design time repository, if you run the following query you'll have a basic overview of whic table is used in which mapping:SELECT MAP_NAME         MAPPING_NAME
    ,      DATA_ENTITY_NAME TABLE_NAME
    ,      BUSINESS_NAME    TABLE_OPERATOR_ALIAS
    ,      DESCRIPTION      TABLE_OPERATOR_DESCRIPTION
    FROM   ALL_IV_XFORM_MAP_COMPONENTS
    WHERE  DATA_ENTITY_TYPE = 'TABLE'Good luck, Patrick

  • HT5429 How Can we reverse to google maps. Apple and Tom Tom maps are awful with plenty of mistakes and less details

    How can we get back google maps as the default maps application.
    Apple maps are just 5 years behind. Really awful and disappointing.

    For now, it's easiest just to go to maps.google.com in Safari.  It will automatically load the mobil version of thei site.  Not the same as the old app, but at least you have access to the basic features.
    You can even create an icon to add to your home screen.
    I think Apple knows they've got a lot of work to do with Maps!
    Matt

  • I have added a ADD-ONE like smart digg I want to debug this ADD-ONE. So plz help me how can i debug this.

    I wants to debug and ADD-ONE plz help me how can i debug the ADD-ONE.

    That's correct - you can't add it to another controller.
    From the View Controller Catalog for iOS:
    A split view controller must always be the root of any interface you create. In other words, you must always install the view from aUISplitViewController object as the root view of your application’s window. The panes of your split view interface may then contain navigation controllers, tab bar controllers, or any other type of view controller you need to implement your interface. Split view controllers cannot be presented modally.
    -=-
    Ken

  • How can we debug the screen pop up?

    How can we debug the screen pop up?

    Hi,
    if you know where the popup is raised it is easy of course as you just have to uses F6 to keep the debug mode running.
    But there is a way to get the popup into debug mode similar to typing /h into the ok code field of a sandard dynpro. Therefore you have to do the following steps:
    1) click the "Create a Shortcut" button in the gui to get a shortcut on your desktop (the button next to new session)
    2) in the oped screen for shortcut setting choose:
         type -> system command
         command -> /h
         depending on gui release you have to enter a system ID -> use the one of your system and parameters -> just type abc
    3) press finish to create the shortcut
    If you have done this you can drag and drop the shortcut from the desktop to a sap session or popup to switch on the debug mode. One shortcut works for all systems you have, the system id in it does not matter.
    Oh, while I often have the case that I forget to resize the window before the popup appears so i cannot access the shortcut directly on the desktop, just remeber that you can always open a small file explorer window go to the desktop folder and drag it from there ;o)
    Best Regards
    Roman

  • How can I debug if I don't have the FlexBuilder?

    If my swf file have problems in my client's computer, how can
    I debug?
    As the action script do not allow me to write file and the
    message box cannot reflect the current status of my program.

    You can't. You'll have to connect to your PC.
     Cheers, Tom

Maybe you are looking for