HOW CAN U CORRECT THE DATA IN UR FILE WHICH CONTAINS 1 LAKSH RECS

Hai Frnds,
i Attend an interview they asked this questions can u know the answeres . tell me .
In File to file scenario how can we reprocess records which failed records.
HOW CAN U CORRECT THE DATA IN UR FILE WHICH CONTAINS 1 LAKSH RECS
Thanks in advance
thahir

Hi,
Refer these links:
this might help you
Generic Approach for Validating Incoming Flat File in SAP XI - Part 1
Generic Approach for Validating Incoming Flat File in SAP XI - Part 1
validating against schema file for the output XML file
Informing the sender about bad records
Regards,
Nithiyanandam

Similar Messages

  • I've just imported photos that are misdated and appear out of order in my events. How can I correct the dates on these events so they appear properly?

    I've just imported photos that are misdated and appear out of order in my events. How can I correct the dates on these events so they appear properly?

    The one iin the Photos ➙ Adjust Date and Time menu option:
    checkbox below:

  • In Firefox 4 how can I cause the date on downloaded files to be the current date? (Some are and some are not. In FF3 the dates were ALWAYS the current ones.)

    In Firefox 4 how can I cause the date on downloaded files to be the current date? (Some are and some are not. In FF3 the dates were ALWAYS the current ones.)
    == This happened ==
    Every time Firefox opened
    == I upgraded to Firefox 4 (beta)

    Firefox 3.6.* and earlier set the downloaded file's modification time to the current time. In Firefox 4.0 the behavior has been changed, if a server returns a timestamp telling when the file was last modified (Last-Modified header), it is used instead.
    You can revert to the previous behaviour by using the [https://addons.mozilla.org/en-US/firefox/addon/93121/ Download Timestamp] add-on.

  • How Can we stop the execution of java program which contain infinite loop

    Dear All,
    I create one .bat file which which execute the simple java program
    I write one java program which execute above .bat file using instance of Runtime Class of java
    It's work fine if java program which is executed by .bat file is simple(Which has normal termination)
    But if that program contain inifinte loop then that file will goes on executing untill I close it manually
    So i want a solution in java which close that bat file (command window ) which is in running condtion
    If there any solution please replay me
    I try to close that .bat file using destroy() ,stop() method of Process and Runtime , Thread Class
    but it did not give me correct output
    .bat file still running !!!!!!!!!
    Thanks in advance

    Why not use javaw.exe to make the app run so you don't need the dos window (which is presumably what you are actually talking about when you say bat file).

  • How can i read the data from attached file?

    using javamail i receiving a mail with attachment
    but unable to read the content of the file
    Plz help me out
    thanks in advance

    The answer is in the JavaMail FAQ.

  • How can i see the total size of files which i have been selected?

    I want move my files including movies and photo to the tumpdrive.
    But, my tumpdrive told me which was only 500MB space.
    Therefore, i decided that choose some movies and photo to there.
    When i chose the files i don't know how much of the total size which i've been selected.
    if above 500MB, i could move.

    With them selected, press the Option, Command, and I keys.
    (75125)

  • HT1727 How can I download the missing "MSCVR80.dll" file which is missing with the latest iTune upgrade?

    I recently downloaded the most recent version of itunes, and now I can't access because to a missing dll file. I have uninstalled/re-installed 3 times from different browsers. Where can I access a download for the missing dll file?

    Click here and follow the instructions.
    (99006)

  • How can I Cache the data I'm reading from a collection of text files in a directory using a TreeMap?

    How can I Cache the data I'm reading from a collection of text files in a directory using a TreeMap? Currently my program reads the data from several text files in a directory and the saves that information in a text file called output.txt. I would like to cache this data in order to use it later. How can I do this using the TreeMap Class? These are the keys,values: TreeMap The data I'd like to Cache is (date from the file, time of the file, current time).
    import java.io.*;
    public class CacheData {
      public static void main(String[] args) throws IOException {
      String target_dir = "C:\\Files";
      String output = "C:\\Files\output.txt";
      File dir = new File(target_dir);
      File[] files = dir.listFiles();
      // open the Printwriter before your loop
      PrintWriter outputStream = new PrintWriter(output);
      for (File textfiles : files) {
      if (textfiles.isFile() && textfiles.getName().endsWith(".txt")) {
      BufferedReader inputStream = null;
      // close the outputstream after the loop
      outputStream.close();
      try {
      inputStream = new BufferedReader(new FileReader(textfiles));
      String line;
      while ((line = inputStream.readLine()) != null) {
      System.out.println(line);
      // Write Content
      outputStream.println(line);
      } finally {
      if (inputStream != null) {
      inputStream.close();

    How can I Cache the data I'm reading from a collection of text files in a directory using a TreeMap? Currently my program reads the data from several text files in a directory and the saves that information in a text file called output.txt. I would like to cache this data in order to use it later. How can I do this using the TreeMap Class?
    I don't understand your question.
    If you don't know how to use TreeMap why do you think a TreeMap is the correct solution for what you want to do?
    If you are just asking how to use TreeMap then there are PLENTY of tutorials on the internet and the Java API provides the methods that area available.
    TreeMap (Java Platform SE 7 )
    Are you sure you want a map and not a tree instead?
    https://docs.oracle.com/javase/tutorial/uiswing/components/tree.html

  • How can I change the date format in Reminders and in Notes?

    How can I change the date format in both Notes and Reminders? Preference on Imac and Settings in IOS do not allow me to change the format in those 2 apps.
    I Like to see 10oct rather than 10/10, as an example.

    pierre
    I do not have Mavericks or iOS - but the first thing I would do is reset the defaults - I'll use Mavericks as an example
    From If the wrong date or time is displayed in some apps on your Mac - Apple Support
    OS X Yosemite and Mavericks
        Open System Preferences.
        From the View menu, choose Language & Region.
        Click the Advanced button.
        Click the Dates tab.
        Click the Restore Defaults button.
        Click the Times tab.
        Click the Restore Defaults button.
        Click OK.
        Quit the app where you were seeing incorrect dates or times displayed.
        Open the app again, and verify that the dates and times are now displayed correctly.
    Then customize to taste - OS X Mavericks: Customize formats to display dates, times, and more
    OS X Mavericks: Customize formats to display dates, times, and more
    Change the language and formats used to display dates, times, numbers, and currencies in Finder windows, Mail, and other apps. For example, if the region for your Mac is set to United States, but the format language is set to French, then dates in Finder windows and email messages appear in French.
        Choose Apple menu > System Preferences, then click Language & Region.
        Choose a geographic region from the Region pop-up menu, to use the region’s date, time, number, and currency formats.
        To customize the formats or change the language used to display them, click Advanced, then set options.
        In the General pane, you can choose the language to use for showing dates, times, and numbers, and set formats for numbers, currency, and measurements.
        In the Dates and Times panes, you can type in the Short, Medium, Long, and Full fields, and rearrange or delete elements. You can also drag new elements, such as Quarter or Milliseconds, into the fields.
        When you’re done customizing formats, click OK.
        The region name in Language & Region preferences now includes “Custom” to indicate you customized formats.
    To undo all of your changes for a region, choose the region again from the Region pop-up menu. To undo your changes only to advanced options, click Advanced, click the pane where you want to undo your changes, then click Restore Defaults.
    To change how time is shown in the menu bar, select the “Time format” checkbox in Language & Region preferences, or select the option in Date & Time preferences.
    Here's the result AppleScript i use to grab the " 'Short Date' ' + ' 'Short Time' "  to paste into download filenames - works good until I try to post it here - the colon " : " is a no-no but is fine in the Finder
    Looks like iOS Settings are a bit less robust
    - Date/Time formats are displayed according to 'tradition' of your region > http://help.apple.com/ipad/8/#/iPad245ed123
    buenos tardes
    ÇÇÇ

  • How can I get the Date & Time to appear on my final project in iMovie11?

    I am using iMovie 11 and have imported video from a Canon Vixia-HF21 camera. The EXIF data is imported along with the video but when I produce the final product, the date and time do not appear.  How can I get the Date  & Time data to appear on the final product?

    There is a date and time Title you can use. If I recall correctly, it displays date plus hours and minutes, but not seconds.

  • HT2305 how can I correct my date and time on my 3G?

    How can I correct my date and time on my 3G? Thanks in advance!

    Just trying to go along the free route. I found Garage Buy   This doesn't work to well but lets you create an applescript and enters the auction into ical. Then you can set ical to run the script once it gets closer to the time.
    Ical only lets you set a time of a minute before the date. So you have to edit the script to add a Delay 59 to have it run 1 second before. From a few refreshes of the time page it looks like ebay time is a second behind, that could be easily be due to time to load the page. anyway i'll opt for a delay of 57secs and give that a try.

  • How can I change the date "taken" on individual photos in iPhoto?

    How can I change the date "taken" on individual photos in iPhoto? I have some photos that were scanned and the date "taken" info displays the day the picture was scanned as opposed to the date it was actually taken. Is there some way to edit this information?

    In iPhoto '11 on your Mac use the command "Photos > Adjust Date and Time" and enable the "Modify original files" option, if you want to set the date of the originals to the correct date as well.
    Regards
    Léonie

  • How can I change the date on my calendar?

    How can I change the date on my calendar?  For some reason, it thinks today's date is Dec. 31, 1969.

    - Go to settings>General>International and make sure that calendar is set to Gregorian.
    - Go to Settings>General>Date&Time and set the correct time and date. I iOS 5, set it to Automatic.

  • How can we give the Data Format (File Type ) in Runtime

    Hi all,
    How can we give the Data Format (File Type ) in Runtime for the following method,
    cl_gui_frontend_services=>gui_download.
    Thanks in advance
    Sri

    There is a filetype parameter which you can set
    CALL METHOD cl_gui_frontend_services=>gui_download
      EXPORTING
    *    BIN_FILESIZE              =
        filename                  =
    *    FILETYPE                  = 'ASC'
    *    APPEND                    = SPACE
    *    WRITE_FIELD_SEPARATOR     = SPACE
    *    HEADER                    = '00'
    *    TRUNC_TRAILING_BLANKS     = SPACE
    *    WRITE_LF                  = 'X'
    *    COL_SELECT                = SPACE
    *    COL_SELECT_MASK           = SPACE
    *    DAT_MODE                  = SPACE
    *    CONFIRM_OVERWRITE         = SPACE
    *    NO_AUTH_CHECK             = SPACE
    *    CODEPAGE                  = SPACE
    *    IGNORE_CERR               = ABAP_TRUE
    *    REPLACEMENT               = '#'
    *    WRITE_BOM                 = SPACE
    *    TRUNC_TRAILING_BLANKS_EOL = 'X'
    *  IMPORTING
    *    FILELENGTH                =
      changing
        data_tab                  =
    *  EXCEPTIONS
    *    FILE_WRITE_ERROR          = 1
    *    NO_BATCH                  = 2
    *    GUI_REFUSE_FILETRANSFER   = 3
    *    INVALID_TYPE              = 4
    *    NO_AUTHORITY              = 5
    *    UNKNOWN_ERROR             = 6
    *    HEADER_NOT_ALLOWED        = 7
    *    SEPARATOR_NOT_ALLOWED     = 8
    *    FILESIZE_NOT_ALLOWED      = 9
    *    HEADER_TOO_LONG           = 10
    *    DP_ERROR_CREATE           = 11
    *    DP_ERROR_SEND             = 12
    *    DP_ERROR_WRITE            = 13
    *    UNKNOWN_DP_ERROR          = 14
    *    ACCESS_DENIED             = 15
    *    DP_OUT_OF_MEMORY          = 16
    *    DISK_FULL                 = 17
    *    DP_TIMEOUT                = 18
    *    FILE_NOT_FOUND            = 19
    *    DATAPROVIDER_EXCEPTION    = 20
    *    CONTROL_FLUSH_ERROR       = 21
    *    NOT_SUPPORTED_BY_GUI      = 22
    *    ERROR_NO_GUI              = 23
    *    others                    = 24

  • How can we view the data asociated with Request ID

    Hi All,
    I have data loaded in an ODS there are multiple files loaded in this ODS. Now i want to view data for a perticuler request OR i want to know how can we know the data associated with a perticular request.
    Please help me out.
    Thanks & Regards
    Amit Kumar

    Copy the request number (not request ID) from the ODS manage screen, Goto RSRQ give the request number and execute. it shows the monitor screen- now goto PSA from the top and check the data. But this possible only if you are loading data to PSA also along with ODS.
    Otherwise, Goto Display Data of ODS from the right click on it -- in the selection screen give the Request ID that you want to check the data. Then it displays only that request data.
    Hope this helps.
    Veerendra.
    Edited by: denduluri veerendra kumar on Dec 1, 2009 12:40 PM
    Edited by: denduluri veerendra kumar on Dec 1, 2009 12:43 PM

Maybe you are looking for

  • Scanning size with HP 2570

    I've been having a problem scanning documents with my HP 2570 all-in-one printer-scanner as far as the size goes. The window that gives the size I want it to scan in as says it's 100 per cent, yet it scans in almost 3 times bigger. When printing what

  • Opening a new project or exe in the current window

    I have a project that has buttons that link to open other projects. Once published the buttons open the project in a new window, in the drop down I have selected 'Current' I have tried publishing my projects as .exe and setting the buttons to open fi

  • ME5A - ALV

    Dears, While running ME5A report using ALV, the delivery date is not coming properly, i.e.,  it is coming as '20090722'.  What should be done so that it displays properly, such as '22.07.2009'. Thanks and Regards,

  • Set view criteria on af:query choice LOV field

    i have an af:query. one of the fields is a choice. the LOV for the choice come from a VO. i need to set view criteria for the query for the LOV for the choice. that is, the query for the values of the choice requires view criteria. moreover, that sea

  • Session replication in oc4j load balancing not working ..

    Hi All, I have windows 2000 machine. I have installed 2 instances of oc4j running on ports 8888 and 8889. I started the loadbalancer.jar in the first instance, started the first oc4j instance and then started the second oc4j instance. I have a common