How can u know the process chain total time, individual time?

Hi guru's
How can u know the process chain total time, individual time?
and what options will available in sm37?
Thanks
prabha reddy

Hi Prabha
Iam not very sure about total time and individual times.
But you can go to tcode rspcm for monitoring the daily process chains. it gives you details like 1. status 2.start date & time 3. Log ID of each process chain.
or you can go to log view of particular individual chain to know how long it has run.
SM37: tcode for simple job selection.
here you check the status of job.
you can select for certain conditions like
1. scheduled
2. released
3. ready
4.active
5. cancelled
Assign points if it was helpful
Revert back if you need further info/
regards
AP

Similar Messages

How to know the process chain start time & end time?

HI all .
how to know the process chain start time & end time at the table level as well as in RSPC level .
regards,
Srinivas

Hello,
there is a program "/ssa/bwt" which will help you to know the exact time when the process was started and ended.
but the thing is you have to provide name of the process chain with the date at which it was executed.
another option is - you can double click on start process and on the last process of the chain.
here, you will get both the timings... Start time of the start process will be the start time of your PC and end time of the last process in the chain will be end time of your PC.
Hope this will help you.

How to know the process chain start time and end time

Hi Experts,
How to know the process chain start time and end time .
Thanks in advance
Regards
Gutti
Edited by: guttireddy on Feb 23, 2012 11:30 PM

Hi Reddy,
You may find the run time of a PC using below steps.
1. Call SE38 > /SSA/BWT > Execute > Enter your PC , choose the date and time > Execute. Here Run-time of a PC is displayed. (or)
2. Call RSPC1 > Enter your PC > Execute > Goto Log view > Right click on the start Variant > Displaying Messages > Note down the start time in Chain Tab. Now Right click on the last Process type of the PC > Displaying Messages > Note down the End time in Chain Tab. The Difference b/w start time and end time gives the Run-time of your PC.
Hope this helps.
Regards
Sai

How can i understand the Process Chain management in real time!!!

Hi,
now i am learning BW concepts. now i would like to know the real time scenarios regarding Process chains. can any body help me in this matter?.
thanks,
stikanth.ch

Hi,
A process chain is a defined sequence of interdependent processes required to perform acomplex task in an SAPBW environment. Data maintenance tasks in SAPBW are notrestricted to uploading data. Aggregate rollups, index maintenance, master data and ODS activation, and a variety of other jobs are required to update data, guarantee best-possible performance, and maintain data integrity. Typical SAPBW implementa-tions have complex interdependent networks of jobs in place that run every night, week,or month.Previous releases of SAPBW did not provide an integrated solution for scheduling and monitoring those kinds of job networks. This has changed with the introduction of process chains in release 3.0. Process chains allow you to define complex job networks consisting of standard SAPBW jobs, as well as custom jobs; they support visualizing the job network and centrally controlling and monitoring the processes.
(from "Mastering the SAP BIW")
New Features in BI 2004s Process Chains
/people/mallikarjuna.reddy7/blog/2007/02/08/new-features-in-bi-2004s-process-chains
Designing
/people/vishvesh.bahirat/blog/2006/11/29/bw-process-chain-design
Process chain creation in 2004s - step by step
/people/juergen.noe/blog/2008/01/11/process-chain-creation--step-by-step
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
http://help.sap.com/saphelp_erp2005/helpdata/en/87/13843b74f7be0fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/67/13843b74f7be0fe10000000a114084/content.htm
Process Chain Errors
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Common Process chain errors
process chain issues or errors
Try Searching in SDN for this Topic and you will find much detailed info as this is discussed very frequently.
Hope this helps.
Thanks,
JituK

How can i end the Process chain based on some condition

HI All,
I have a scenario where i have a main pc chain which call the new chain at the end which in turn again call pc1. So its more like a closed loop .
pc1-->pc2->pc1
What main chain does is it reads some field value from a dso and assign that to some variable and set some flag to identify that value has been used. My second chain just run the report using the same variables assign by first chain. Now i have to design the main chain such that when all the values have been read from the dso, it should exit and should not trigger 2nd chain. How can i achieve this scenario.
Thanks
Prashant

Hi,
For this try using Process Type-"Decision between multiple Alternatives" in your main chain.It helps you the set condieion based on some formulas
Pls refer links
Decision Between Multiple Alternatives
thanks
nilesh
Edited by: npathak on Aug 11, 2010 1:16 PM

How can we set a process chain to trigger the nodes w/o manual intervention

SDNers,
We have a Master PC which has the loading & activation of some Hierarchies.Wats happening is some of the hier activations are failing (we got track of the root cause as well) and the nodes below are not getting triggered automatically, eventhough they have been designed to get triggered irrespective of success or failure of this hierarchy activation. The chain prompts for the u2018Status change & trigger the following eventsu2019 opo-up and only when it was said u2018yesu2019, the subsequent node gets triggered in the chain. If this manual intervention was not there, the Chain gets struck at the activation node, whic is running in yellow status for long, though a short dump - error has already been thrown.
My query is how can we set a process chain not to anticipate the manual intervention of chnaging the status & trigger events pop-up

Hi ravi,
i'm not sure abt the query but what i got thru ur qustion is u have to automtaically go to the next load/step even the proceess chain fails in the step......
for that we have the same master meta chains with link of so many local chains...for this even if there are some interventions/fails in between the process chains it never gets stopped....
it goes to the next step and we'll work, analyse and finish the failed load manually....the next day it'll be
fine...
b4 to this make sure that there is no dependency for the previous loads....
And now the solution i found for this is in the process chain design itself.......
while giving the links itself we'll be getting the options as status RED,GREEN and RED(or)GREEN.....now if u got for the third option the event goes to the next step even it is unsuceesful....
rgds,
nkr.

Can we stop the process chain in middle of the process ?

hi experts,
Can we stop the process chain in middle of the process after scheduled.
my process chain is like start--->load>psa>ods1-->further updates--->ods2. In this case I have already scheduled but i want to stop the process how can i. After rectifying the error I want to restart again.
if it is possible what are the steps we fallow pl give me step by step procedure.
thanks & regards.
venkat

stopping the process chain is pretty simple. you just need to kill the jobs associated to them as mentioned by other folks.
for restarting, have a look at this blog.
Restarting Processchains
there he explains how to restart a stopped process chain.
Raghav

How can i find the meta chain name?

My process chains are running based on meta chain option,So how can i find the meta chain name???

Hello
Goto SE16
Table RSPCCHAIN
ut u r local chain name as varient and exe
similerly goback if the chain you get is also a local chain....Until you get only one chain...
Where Used List --
RSPCPROCESSLOG table
You can see the Process Logs at SM37 too based on the Technical name of the Chain you can trace the Meta chian
Thanks
Geeta

Is there a limit for the apps that i purchased or i can purchase as much i want? and how can i know the capacity it's taking? Thank you

Is there a limit for the apps that i purchased or i can purchase as much i want? and how can i know the capacity it's taking? Thank you

Yes you can buy whatever you want if your credit card is in good standing.
Before you buy, read the size of the download in iTunes/App/iBook Store.
Rule of thumb, you need to reserve about 10% of your total space.

Hi experts . how can we know the stock details for a perticular plant?

hi experts . how can we know the stock details for a perticular plant

check this code
REPORT YSG_MATSTK_REP    LINE-SIZE 220
                          LINE-COUNT 50(5).
*&                       DATA DECLARATION                              *
TABLES: MARA,              "GENERAL MASTER DATA
        MARC,              "PLANT DATA FOR MATERIAL
        MARD,              "STORAGE LOCATION DATA FOR MATERIAL
        MBEW,              "MATERIAL VALUATION
        MVKE,              "SALES DATA FOR MATERIAL
        MAKT.              "MATERIAL DESCRIPTION
DATA: BEGIN OF I_MARA OCCURS 0,
           MATNR LIKE MARA-MATNR,"MATERIAL NUMBER
           MBRSH LIKE MARA-MBRSH,"INDUSTRY SECTOR
           MEINS LIKE MARA-MEINS,"BASE UNIT OF MEASURE
      END OF I_MARA.
DATA: BEGIN OF I_MARC OCCURS 0,
          MATNR LIKE MARC-MATNR,"MATERIAL NUMBER
          WERKS LIKE MARC-WERKS,"PLANT
          LVORM LIKE MARC-LVORM,"FLAG MATERIAL FOR DELETION AT PLANT
                                "LEVEL
          PSTAT LIKE MARC-PSTAT,"MAINTENANCE STATUS
          DISPO LIKE MARC-DISPO,"MRP CONTROLLER
      END OF I_MARC.
DATA: BEGIN OF I_MAKT OCCURS 0,
           MATNR LIKE MAKT-MATNR,"MATERIAL NUMBER
           MAKTX LIKE MAKT-MAKTX,"MATERIAL DESCRIPTION
      END OF I_MAKT.
DATA: BEGIN OF I_MVKE OCCURS 0,
           MATNR LIKE MVKE-MATNR,"MATERIAL NUMBER
           VKORG LIKE MVKE-VKORG,"SALES ORGANIZATION
           VTWEG LIKE MVKE-VTWEG,"DISTRIBUTION CHANNEL
      END OF I_MVKE.
DATA: BEGIN OF I_MARD OCCURS 0,
           MATNR LIKE MARD-MATNR,"MATERIAL NUMBER
           LGORT LIKE MARD-LGORT,"STORAGE LOCATION
           LABST LIKE MARD-LABST,"VALUATED STOCK WITH UNRESTRICTED USE
      END OF I_MARD.
DATA: BEGIN OF I_OUT OCCURS 0,
        MATNR LIKE MARC-MATNR,
        WERKS LIKE MARC-WERKS,
        LVORM LIKE MARC-LVORM,
        PSTAT LIKE MARC-PSTAT,
        DISPO LIKE MARC-DISPO,
        MBRSH LIKE MARA-MBRSH,
        MEINS LIKE MARA-MEINS,
        MAKTX LIKE MAKT-MAKTX,
        VKORG LIKE MVKE-VKORG,
        VTWEG LIKE MVKE-VTWEG,
        LGORT LIKE MARD-LGORT,
        LABST LIKE MARD-LABST,
      END OF I_OUT.
DATA : TOT TYPE I. " TOT - TOTAL TO PRINT STOCK
*&                   S E L E C T I O N - S C R E E N                   *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-100.
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR OBLIGATORY.
PARAMETERS: P_WERKS LIKE MARC-WERKS OBLIGATORY.
SELECT-OPTIONS: S_LGORT FOR MARD-LGORT,
                S_DISPO FOR MARC-DISPO.
SELECTION-SCREEN END OF BLOCK B1.
*&                  I N I T I A L I Z A T I O N                      *
INITIALIZATION.
S_MATNR-SIGN = 'I'.
S_MATNR-OPTION = 'EQ'.
S_MATNR-LOW = 'M-14'.
S_MATNR-HIGH = 'M-18'.
P_WERKS = '3000'.
S_LGORT-SIGN = 'I'.
S_LGORT-OPTION = 'EQ'.
S_LGORT-LOW = '0001'.
S_LGORT-HIGH = '0004'.
S_DISPO-SIGN = 'I'.
S_DISPO-OPTION = 'EQ'.
S_DISPO-LOW = '001'.
S_DISPO-HIGH = '002'.
APPEND S_DISPO.
APPEND S_LGORT.
APPEND S_MATNR.
CLEAR S_DISPO.
CLEAR S_LGORT.
CLEAR S_MATNR.
*&             S T A R T - O F - S E L E C T I O N                     *
START-OF-SELECTION.
SELECT MATNR WERKS LVORM DISPO FROM MARC
INTO CORRESPONDING FIELDS OF TABLE I_MARC
                      WHERE WERKS EQ P_WERKS
                      AND MATNR IN S_MATNR
                      AND DISPO IN S_DISPO
                      AND WERKS = P_WERKS.
IF I_MARC[] IS INITIAL.
    WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MARC'.
    EXIT.
ENDIF.
SELECT MATNR LGORT LABST FROM MARD INTO TABLE I_MARD
                      FOR ALL ENTRIES IN I_MARC
                      WHERE MATNR = I_MARC-MATNR
                      AND WERKS EQ P_WERKS
                      AND LGORT IN S_LGORT.
IF I_MARD[] IS INITIAL.
    WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MARD'.
    EXIT.
ENDIF.
SELECT MATNR VKORG VTWEG FROM MVKE INTO TABLE I_MVKE
                      FOR ALL ENTRIES IN I_MARC
                      WHERE MATNR = I_MARC-MATNR.
IF I_MVKE[] IS INITIAL.
    WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MVKE'.
    EXIT.
ENDIF.
LOOP AT I_MARC.
    MOVE-CORRESPONDING I_MARC TO I_OUT.
    CLEAR MARC.
    SELECT SINGLE MATNR MBRSH MEINS FROM MARA
                     INTO CORRESPONDING FIELDS OF MARA
                     WHERE MATNR = I_OUT-MATNR.
    IF SY-SUBRC = 0.
      MOVE: MARA-MBRSH TO I_OUT-MBRSH,
            MARA-MEINS TO I_OUT-MEINS.
    ELSE.
      CONTINUE.
    ENDIF.
    SELECT SINGLE MATNR MAKTX FROM MAKT
                    INTO CORRESPONDING FIELDS OF MAKT
                    WHERE MATNR = I_OUT-MATNR.
    IF SY-SUBRC = 0.
      MOVE: MAKT-MAKTX TO I_OUT-MAKTX.
    ELSE.
      CONTINUE.
    ENDIF.
    LOOP AT I_MARD WHERE MATNR = I_MARC-MATNR.
      MOVE: I_MARD-LABST TO I_OUT-LABST,
            I_MARD-LGORT TO I_OUT-LGORT.
      APPEND I_OUT.
    ENDLOOP.
    LOOP AT I_MVKE WHERE MATNR = I_MARC-MATNR.
      MOVE: I_MVKE-VKORG TO I_OUT-VKORG,
            I_MVKE-VTWEG TO I_OUT-VTWEG.
      APPEND I_OUT.
    ENDLOOP.
    CLEAR I_OUT.
ENDLOOP.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    FILENAME = 'C:\matstk.TXT'
   FILETYPE                        = 'ASC'
TABLES
    DATA_TAB                        = I_OUT.
*&                  T O P - O F - P A G E                              *
TOP-OF-PAGE.
WRITE:/ 'DATE:' ,SY-DATUM.
*&                  E N D - O F - P A G E                              *
END-OF-PAGE.
WRITE: / SY-ULINE,
         /100 'PAGNO: ',SY-PAGNO,
         SY-ULINE.
*&        E N D -- O F -- S E L E C T I O N                           *
END-OF-SELECTION.
LOOP AT I_OUT.
    AT FIRST.
      WRITE :/ 'MATERIAL EXTRACTION REPORT',
               SY-ULINE.
    ENDAT.
    WRITE:/    SY-VLINE,
               I_OUT-MATNR,SY-VLINE,
               I_OUT-MEINS,SY-VLINE,
               I_OUT-WERKS,SY-VLINE,
               I_OUT-LVORM,SY-VLINE,
               I_OUT-PSTAT,SY-VLINE,
               I_OUT-DISPO,SY-VLINE,
               I_OUT-MBRSH,SY-VLINE,
               I_OUT-MAKTX,SY-VLINE,
               I_OUT-VKORG,SY-VLINE,
               I_OUT-VTWEG,SY-VLINE,
               I_OUT-LGORT,SY-VLINE,
               I_OUT-LABST,SY-VLINE.
    TOT = TOT + I_OUT-LABST.
    AT NEW MATNR.
      WRITE : 'NEW RECORD',
               SY-VLINE.
    ENDAT.
    AT END OF LABST.
      WRITE : 'STOCK = ',
               TOT,
               SY-VLINE,
               SY-ULINE.
    ENDAT.
    AT LAST.
      FORMAT COLOR 7 INTENSIFIED OFF.
      WRITE : /159 'TOTAL STOCK = ',
                 TOT.
    ENDAT.
ENDLOOP.
    WRITE : /159 'TOTAL STOCK = ',
                 TOT.
regards,
srinivas
<b>*reward for useful answers*</b>

How can we delete a process chain?

Dear Ones,
By Mistake I have converted an infopackage group into process chain in Quality system. How can we delete a process chain?
Thanks,
Raj

Hi Bhanu,
I've doubt that what is the difference between cancel with core and cancel without core with respect to process chain.
Could you please advice how do we start a process chain daily without using the schedular window for transaction data.
Thanks in advance...
Amarnath.

How can i know the RPM of my HD?

I guys...
Simple question...
How can i know the RPM of my HD?
I have a Mac mini and i would like to know that.
Any ideas?.
Thanks so much!!!

Hi!!
It doesn't show...
Vendor:          NVidia
Product:          MCP79 AHCI
Link Speed:          3 Gigabit
Negotiated Link Speed:          1.5 Gigabit
Description:          AHCI Version 1.20 Supported
FUJITSU MHZ2120BH G1:
Capacity:          120.03 GB (120,034,123,776 bytes)
Model:          FUJITSU MHZ2120BH G1
Revision:          00810009
Serial Number:                  K64PT9427599
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Medium Type:          Rotational
Bay Name:          Lower
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
Capacity:          209.7 MB (209,715,200 bytes)
Writable:          Yes
BSD Name:          disk0s1
Macintosh HD:
Capacity:          119.69 GB (119,690,149,888 bytes)
Available:          21.38 GB (21,376,569,344 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk0s2
Mount Point:          /
FUJITSU MHZ2120BH G1:
Capacity:          120.03 GB (120,034,123,776 bytes)
Model:          FUJITSU MHZ2120BH G1
Revision:          00810009
Serial Number:                  K64PT9427599
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Medium Type:          Rotational
Bay Name:          Lower
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
Capacity:          209.7 MB (209,715,200 bytes)
Writable:          Yes
BSD Name:          disk0s1
Macintosh HD:
Capacity:          119.69 GB (119,690,149,888 bytes)
Available:          21.38 GB (21,376,569,344 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk0s2
Mount Point:          /
Those are the 2 texts...
Any idea?
Thanks!!

How can i Know the email linked to icloud

Please can anyone help me how to know teh email linked to my phone ??
it shows me h********@hotmail.com i tried to logged in with my account that belong to h********@hotmail.com and it says inocrrect password or email i tried to reset my id but no reset mail was sent to my email ..
so i tried to creat a new with the existing email addreess and it works and verified and finally i tried to activate it with h********@hotmail.com with the new passs and it says account cannot be activate with h********@hotmail.com it is linked to another account ..
so please how can i know the linked email to my phone
Thank you

Welcome to the Apple community jorjh.
If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.

How can we know the affected reports when i remove object from universe

Hi All,
If i remove any objects from the universe.
How can i know the list of affected reports.

Thanks for your update.
It shows what are all the reports has been created by using that particular universe.
But my question was, if i remove any object from the universe, Then what are all the reports affected(We may not use that deleted object in all the reports)

How can we know the return code of BDC Program ?

Hi All,
Please tell me : How can we know the return code of BDC Program when being exceuted in Session or in Transaction mode.
In my program, we are uploading data from Excel sheet to SAP via BDC
The records that are not updated we want to create a log file.
Now to know whether a record is updated ot not, wat syst field shloud be used?
Its urgent....
<b>Reward Point will be there ....</b>
Thanks,
Harish

Hi harish,
try the logic in this code ...
i had attached input file in the end.
TYPES: begin of errmess,
        msgnr type t100-msgnr,
        text type t100-text,
       end of errmess.
TABLES : t100.
DATA: BEGIN OF DD_VA01,
       AUART TYPE VBAK-AUART,
       KUNNR TYPE RV45A-KUNNR,
       BSTKD TYPE VBKD-BSTKD,
       MABNR TYPE RV45A-MABNR,
       KWMENG(2) type C,
       KBETR(2) type C,
      END OF DD_VA01.
DATA:IT_VA01     Like TABLE OF DD_VA01,
     WA_VA01     Like LINE OF IT_VA01,
     WA_VA01_F   Like LINE OF IT_VA01,
     IT_BDCDATA TYPE TABLE OF BDCDATA,
     WA_BDCDATA Like Line OF IT_BDCDATA,
     W_FNAME     TYPE STRING,
     messtab like bdcmsgcoll occurs 0 with header line,
     it_errmess type table of errmess,
     wa_errmess like line of it_errmess,
     err_message type string.
data: zf1 type i,
      zc1 type c value '2',
      fn(20) type c.
Main Code ************************************************************
PERFORM get_input using 'C:\Documents and Settings\ic881592\Desktop\Daran_bdc_VA01-e.txt'.
SORT IT_VA01 BY AUART KUNNR BSTKD.
LOOP AT IT_VA01 INTO WA_VA01.
if WA_VA01_F-AUART <> WA_VA01-AUART OR
     WA_VA01_F-KUNNR <> WA_VA01-KUNNR OR
     WA_VA01_F-BSTKD <> WA_VA01-BSTKD.
       PERFORM set_header_flag.
       PERFORM create_bdc_header_data.
endif.
PERFORM create_bdc_item_data.
ENDLOOP.
PERFORM call_transaction.
PERFORM errorlog.
Procedures ***********************************************************
form get_input using w_fname.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME            = W_FNAME
      HAS_FIELD_SEPARATOR = '#'
    TABLES
      DATA_TAB            = IT_VA01.
endform.
form call_transaction.
    PERFORM bdc_field       using 'BDC_OKCODE' '/11'.
    CALL TRANSACTION 'VA01' USING IT_BDCDATA MODE 'A' messages into messtab.
    refresh it_bdcdata.
endform.
FORM set_header_flag.
       WA_VA01_F-AUART = WA_VA01-AUART.
       WA_VA01_F-KUNNR = WA_VA01-KUNNR.
       WA_VA01_F-BSTKD = WA_VA01-BSTKD.
       if zf1 = 1.
           PERFORM call_transaction.
       endif.
       zf1 = 1.
endform.   "set_header_flag.
form create_bdc_header_data.
     perform bdc_dynpro      using 'SAPMV45A' '0101'.
     perform bdc_field       using 'VBAK-AUART' WA_VA01-AUART.
     perform bdc_field       using 'BDC_OKCODE' '/00'.
     perform bdc_dynpro      using 'SAPMV45A' '4001'.
     perform bdc_field       using 'KUAGV-KUNNR' WA_VA01-KUNNR.
     perform bdc_field       using 'VBKD-BSTKD' WA_VA01-BSTKD.
     perform bdc_field       using 'BDC_OKCODE' '/00'.
     perform bdc_dynpro      using 'SAPMSSY0' '0120'.
     perform bdc_field       using 'BDC_CURSOR' '04/06'.
     perform bdc_field       using 'BDC_OKCODE' '=CHOO'.
     perform bdc_dynpro      using 'SAPMV45A' '4001'.
     PERFORM bdc_field       USING 'BDC_OKCODE' '=POAN'.
endform. "create_bdcdata
FORM create_bdc_item_data.
     CONCATENATE 'RV45A-KWMENG(' zc1 ')' INTO FN.
     perform bdc_field       using 'BDC_CURSOR' FN.
     perform bdc_field       using FN WA_VA01-KWMENG.
     CONCATENATE 'KOMV-KBETR(' zc1 ')' INTO FN.
     perform bdc_field       using FN WA_VA01-KBETR.
     CONCATENATE 'RV45A-MABNR(' zc1 ')' INTO FN.
     perform bdc_field       using FN WA_VA01-MABNR.
     perform bdc_dynpro      using 'SAPMV45A' '4001'.
     PERFORM bdc_field       USING 'BDC_OKCODE' '=POAN'.
ENDFORM.
form errorlog.
LOOP AT MESSTAB .
    if MESSTAB-MSGNR = '311' or MESSTAB-MSGTYP = 'E'.
        SELECT SINGLE msgnr text FROM T100
                        into wa_errmess
                        WHERE SPRSL = MESSTAB-MSGSPRA
                          AND ARBGB = MESSTAB-MSGID
                          AND MSGNR = MESSTAB-MSGNR.
        IF SY-SUBRC = 0.
          err_message = wa_errmess-TEXT.
          IF err_message CS '&1'.
            REPLACE '&1' WITH MESSTAB-MSGV1 INTO err_message.
            REPLACE '&2' WITH MESSTAB-MSGV2 INTO err_message.
            REPLACE '&3' WITH MESSTAB-MSGV3 INTO err_message.
            REPLACE '&4' WITH MESSTAB-MSGV4 INTO err_message.
          ELSE.
            REPLACE '&' WITH MESSTAB-MSGV1 INTO err_message.
            REPLACE '&' WITH MESSTAB-MSGV2 INTO err_message.
            REPLACE '&' WITH MESSTAB-MSGV3 INTO err_message.
            REPLACE '&' WITH MESSTAB-MSGV4 INTO err_message.
          ENDIF.
          CONDENSE err_message.
          WRITE: / MESSTAB-MSGTYP, err_message .
        ELSE.
          WRITE: / MESSTAB.
        ENDIF.
    endif.
ENDLOOP.
endform. "errorlog
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
WA_BDCDATA-PROGRAM = PROGRAM.
WA_BDCDATA-DYNPRO   = DYNPRO.
WA_BDCDATA-DYNBEGIN = 'X'.
APPEND WA_BDCDATA TO IT_BDCDATA.
CLEAR WA_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
WA_BDCDATA-FNAM = FNAM.
WA_BDCDATA-FVAL = FVAL.
APPEND WA_BDCDATA TO IT_BDCDATA.
CLEAR WA_BDCDATA.
ENDFORM.
input file :
OR     2148     0001235     R-1162     8     17
OR     2148     0001235     R-1161     2     30
OR     2148     0001235     100-400     6     25
OR     2148     0001235     R-1162     4     12
OR     2148     0001236     R-1162     3     12
OR     2148     0001236     R-1161     2     30
OR     2148     0001236     100-400     1     25
OR     2148     0001236     R-1162     7     12
OR     2148     0001236     R-1161     8     30
OR     2148     0001236     100-400     10     25
OR     2148     0001235     R-1161     5     30
OR     2148     0001235     100-400     2     25
OR     2148     0001235     R-11621     3     12
OR     2148     0001235     R-1161     2     30
OR     2148     0001235     100-400     1     25
OR     2148     0001235     R-1162     7     12
OR     2148     0001235     R-1161     8     30
OR     2148     0001235     100-400     10     25
OR     2148     0001236     R-1162     8     17
OR     2148     0001236     R-1161     2     30
OR     2148     0001236     100-400     6     25
OR     2148     0001236     R-1162     4     12
OR     2148     0001236     R-1161     5     30
OR     2148     0001236     100-400     2     25

How can u know the process chain total time, individual time?

Similar Messages

Maybe you are looking for