How can unlock the 4s or factory unlock

how can unlock the 4s or factory unlock.......
any idea for unlocking thanks ... i read many sites like iphone 4
iphone apps,android apps,but unlock procedure is risky and i dont know its 100% work or not so plz advice me thanks...

You can call them with a telephone or email them and ask what their unlock policy is and how to process it.
If you do not know who your iPhone is locked to you can call AppleCare and tell them you are only calling to get the unlock status of your iPhone.

Similar Messages

How can unlock my Iphone if the Carrier does not offer this service?

How can unlock my Iphone if the Carrier does not offer this service?

This is an iPad forum ... for issues dealing with iPhone, go here ...
Using iPhone

Hp pavilion dv9500, please how can recover the original window

hp pavilion dv9500, please how can recover the original window

Hi,
There are Three main ways to restore your notebook to its 'Factory Condition' - see the document on the relevant link below.
Performing An HP System Recovery - Windows 7.
Performing An HP System Recovery - Windows Vista.
Performing An HP System Recovery - Windows XP.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How can avoid the problem of Parameter Prompting when I submitting ?

I am developing web application in visual studio 2008 in csharp.How can avoid the issue or problem of Parameter Prompting when I send parameters programaticaly or dyanmicaly? I am sending the values from .net web form to crystal report but it is still asking for parameters. so when i submit second time that is when the reports is being genereated. How can i solve this problem. Please help. The code Iam using is below.
   1. using System;
   2. using System.Collections;
   3. using System.Configuration;
   4. using System.Data;
   5. using System.Linq;
   6. using System.Web;
   7. using System.Web.Security;
   8. using System.Web.UI;
   9. using System.Web.UI.HtmlControls;
10. using System.Web.UI.WebControls;
11. using System.Web.UI.WebControls.WebParts;
12. using System.Xml.Linq;
13. using System.Data.OleDb;
14. using System.Data.OracleClient;
15. using CrystalDecisions.Shared;
16. using CrystalDecisions.CrystalReports.Engine;
17. using CrystalDecisions.Web;
18.
19.
20. public partial class OracleReport : System.Web.UI.Page
21. {
22.     CrystalReportViewer crViewer = new CrystalReportViewer();
23.     //CrystalReportSource crsource = new CrystalReportSource();
24.     int nItemId;
25.
26.     protected void Page_Load(object sender, EventArgs e)
27.     {
28.         //Database Connection
29.         ConnectionInfo ConnInfo = new ConnectionInfo();
30.         {
31.             ConnInfo.ServerName = "127.0.0.1";
32.             ConnInfo.DatabaseName = "Xcodf";
33.             ConnInfo.UserID = "HR777";
34.             ConnInfo.Password = "zghshshs";
35.         }
36.         // For Each Logon parameters
37.         foreach (TableLogOnInfo cnInfo in this.CrystalReportViewer1.LogOnInfo)
38.         {
39.             cnInfo.ConnectionInfo = ConnInfo;
40.
41.         }
42.
43.
44.
45.
46.
47.
48.         //Declaring varibles
49.          nItemId = int.Parse(Request.QueryString.Get("ItemId"));
50.         //string strStartDate = Request.QueryString.Get("StartDate");
51.         //int nItemId = 20;
52.         string strStartDate = "23-JUL-2010";
53.
54.         // object declration
55.         CrystalDecisions.CrystalReports.Engine.Database crDatabase;
56.         CrystalDecisions.CrystalReports.Engine.Table crTable;
57.
58.
59.         TableLogOnInfo dbConn = new TableLogOnInfo();
60.
61.         // new report document object
62.         ReportDocument oRpt = new ReportDocument();
63.
64.         // loading the ItemReport in report document
65.         oRpt.Load("C:
Inetpub
wwwroot
cryreport
CrystalReport1.rpt");
66.
67.         // getting the database, the table and the LogOnInfo object which holds login onformation
68.         crDatabase = oRpt.Database;
69.
70.         // getting the table in an object array of one item
71.         object[] arrTables = new object[1];
72.         crDatabase.Tables.CopyTo(arrTables, 0);
73.
74.         // assigning the first item of array to crTable by downcasting the object to Table
75.         crTable = (CrystalDecisions.CrystalReports.Engine.Table)arrTables[0];
76.
77.         dbConn = crTable.LogOnInfo;
78.
79.         // setting values
80.         dbConn.ConnectionInfo.DatabaseName = "Xcodf";
81.         dbConn.ConnectionInfo.ServerName = "127.0.0.1";
82.         dbConn.ConnectionInfo.UserID = "HR777";
83.         dbConn.ConnectionInfo.Password = "zghshshs";
84.
85.         // applying login info to the table object
86.         crTable.ApplyLogOnInfo(dbConn);
87.
88.
89.
90.
91.
92.
93.         crViewer.RefreshReport();
94.
95.                 // defining report source
96.         crViewer.ReportSource = oRpt;
97.         //CrystalReportSource1.Report = oRpt;
98.
99.         // so uptill now we have created everything
100.         // what remains is to pass parameters to our report, so it
101.         // shows only selected records. so calling a method to set
102.         // those parameters.
103.      setReportParameters();
104.     }
105.
106.     private void setReportParameters()
107.     {
108.
109.         // all the parameter fields will be added to this collection
110.         ParameterFields paramFields = new ParameterFields();
111.          //ParameterFieldDefinitions ParaLocationContainer = new ParameterFieldDefinitions();
112.        //ParameterFieldDefinition ParaLocation = new ParameterFieldDefinition();
113.
114.         // the parameter fields to be sent to the report
115.         ParameterField pfItemId = new ParameterField();
116.         //ParameterField pfStartDate = new ParameterField();
117.         //ParameterField pfEndDate = new ParameterField();
118.
119.         // setting the name of parameter fields with wich they will be recieved in report
120.
121.         pfItemId.ParameterFieldName = "RegionID";
122.
123.         //pfStartDate.ParameterFieldName = "StartDate";
124.         //pfEndDate.ParameterFieldName = "EndDate";
125.
126.         // the above declared parameter fields accept values as discrete objects
127.         // so declaring discrete objects
128.         ParameterDiscreteValue dcItemId = new ParameterDiscreteValue();
129.         //ParameterDiscreteValue dcStartDate = new ParameterDiscreteValue();
130.         //ParameterDiscreteValue dcEndDate = new ParameterDiscreteValue();
131.
132.         // setting the values of discrete objects
133.
134.
135.           dcItemId.Value = nItemId;
136.
137.         //dcStartDate.Value = DateTime.Parse(strStartDate);
138.         //dcEndDate.Value = DateTime.Parse(strEndDate);
139.
140.         // now adding these discrete values to parameters
141.           //paramField.HasCurrentValue = true;
142.
143.
144.
145.           //pfItemId.CurrentValues.Clear();
146.          int valueIDD = int.Parse(Request.QueryString.Get("ItemId").ToString());
147.           pfItemId.Name = valueIDD.ToString();
148.
149.         pfItemId.CurrentValues.Add(dcItemId);
150.         //ParaLocation.ApplyCurrentValues;
151.         pfItemId.HasCurrentValue = true;
152.
153.         //pfStartDate.CurrentValues.Add(dcStartDate);
154.         //pfEndDate.CurrentValues.Add(dcEndDate);
155.
156.         // now adding all these parameter fields to the parameter collection
157.         paramFields.Add(pfItemId);
158.
159.         //paramFields.Add(pfStartDate);
160.         //paramFields.Add(pfEndDate);
161.         /////////////////////
162.         //Formula from Crystal
163.        //crViewer.SelectionFormula = "{COUNTRIES.REGION_ID} = " + int.Parse(Request.QueryString.Get("ItemId")) + "";
164.         crViewer.RefreshReport();
165.         // finally add the parameter collection to the crystal report viewer
166.         crViewer.ParameterFieldInfo = paramFields;
167.
168.
169.
170.     }
171. }

Keep your post to under 1200 characters, else you loose the formatting. (you can do two posts if need be).
Re. parameters. First, make sure yo have SP 1 for CR 10.5:
https://smpdl.sap-ag.de/~sapidp/012002523100009351512008E/crbasic2008sp1.exe
Next, see the following:
[Crystal Reports for Visual Studio 2005 Walkthroughs|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23]
CR Dev help file:
http://msdn2.microsoft.com/en-us/library/bb126227.aspx
Samples:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

How can identify the default currency for a customer?

How can identify the default currency for a customer?
I know that this is being determined when you create a sales order for a particular customer, for example, so I could break this process open and find out what it uses. But I thought it worth asking in this forum first.
Blue

Hi Gary,
As per my understanding of your question I am replying , If you are looking some thing else then I request you to please elaborate your query.
If you see the BP sales area data in transaction BP, In billing tab you maintain the currency for a customer which is default currency when you create a sales order.
<b>Reward points if it helps!!</b>
Best regards,
Vikash

How can hide the command line of a t.code in the portal

Dear Experts.
I have the following doubt:
How can hide the Command Line of a Report that is called with a T.Code in the portal?
Attach Image:
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
When I created a service using the T.Code SICF for the T.Code , I can hide buttons and the filed command line using
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
With notes 1010519, "SAP GUI for HTML: Simplified Title Area Without Menu and OK Code" and 959417.
But the problem is that when I create the service in the T.Code SICF, I also have that create an Iview IAC in the portal.
The Question is : How can hide this fields and buttons if I want Publish the T.code using an Iview Transaction in the portal?
In this moment I have used the two options:
1 option) I created a service using the t.Code SICF for my Transaction and I also created an Iview IAC in the portal for call the service.
RESULT:
SAP Web Application Server
         500 Connection timed out
        Error: -5
       Version: 7000
       Component: ICM
       Date/Time: Sat Jun 12 20:26:39 2010
       Module: icxxthr_mt.c
       Line: 2698
       Server: xyxab...
Error Tag: {-}
Detail: Connection to partner timed out after 60s
2) created an Iview Transaction in the portal and call my transaction.
RESULT.
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
But not can hide the field Command Line and other buttons.
I think that the command :
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
Only can be used if I create a service using the T.Code SICF .
Best Regards
Carmen.

Hi Carmen,
The bottom line is that this cannot be done for transaction iviews without modifying the standard webgui service in SICF, which is probably not a good idea (since it affects everyone using SAP GUI for HTML). (You could hack the appintegrator to add the ~webgui_simple_toolbar parameter to the transaction URL template in the portal, but again its not a recommended thing to do ...). Better to create an IAC service in SICF with ~webgui=1 where you set the required appearance using an appropriate value for ~webgui_simple_toolbar, and then create an IAC iview to point at this service.
You can even override the ~transaction value configured in the new service in individual IAC iviews by entering the appropriate value in the application parameter of the iview, for example:
~okcode=/nSU01
And you can pass parameters in the same way:
~okcode=/nSU01 USR02-BNAME=xyz;USREFUS-USERALIAS=abc;
By the way, it would not be recommended to create a URL iview to access an IAC, since you are likely to encounter session management issues in this scenario - better to use an IAC iview.
Regards, Rory

How can all the users in my computer (my kids) have access to all the photos I have in I Photo?

How can all the users in my computer (my kids) have access to all the photos I have in I Photo? My photos only appear when I (the administrator) log into the computer. I want my kids to be able to access them also.

For iPhoto 09 (version 8.0.2) and later:
What you mean by 'share'.
If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
Remember iPhoto must be running in both accounts for this to work.
If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc.
Quit iPhoto in both accounts. Move the Library to the Users / Shared Folder
(You can also use an external HD set to ignore permissions, a Disk Image or even partition your Hard Disk.)
In each account in turn: Double click on the Library to open it. (You may be asked to repair the Library Permissions.) From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.

How can show the result of a measuring that is done in a sub-program in my main panel?

How can show the result of a measuring that is done in a sub-program in my main panel?

In your subvi, wire the result(s) you want to ouput to the main program to an output terminal on the connector pane.
For a tutorial on subvi's, search the help for "connector panes" anc click on tutorial.
~Tim

How can get the console window name of the current form?

How can get the console window name of the current form?

Try the various get methods of the viewObject such as getQuery:
http://www.oracle.com/webapps/online-help/jdeveloper/10.1.2/state/content/navId.4/navSetId._/vtAnchor.getQuery%28%29/vtTopicFile.bc4jjavadoc%7Crt%7Coracle%7Cjbo%7CViewObject%7Ehtml/

HT4759 How can make the events listed in my chalenda become automatically a reminder in the reminder?:

How can make the events listed in my chalenda become automatically a reminder in the reminder?:

Welcome to the Apple community.
Calendar and reminders are two different and separate apps, you cannot transfer information between the two of them.

How can Modify the Text of a MessageArea in a Application WD ABAP Standard?

Dear Experts.
How can Modify the Text of a MessageArea in a Application WD ABAP Standard?
I found the following link in the helpsap, but in this moment I don't know How found this text? and Modify this text with a new text.
http://help.sap.com/saphelp_nw70/helpdata/en/3a/f6ba42a950da11e10000000a155106/frameset.htm
The text of a MessageArea are in a table of configuration or can do the system for get this text and show in the application in the portal? How can get this and modify by a new text.
Please help me with a suggestions.
Thanks
Regards
Carmen G.

Dear Kranthi..
The datas of the Application is the following:
General Information About the Application and Component
Application: FITE_REQUEST
Web Dynpro Component: FITV_FPM
Window Information: FPM_WINDOW
View Information: Layout_view
Information on Field
Field ID: HELPTEXT
Type of UI Element : Explanation
Attributes of UI Element
TEXT_DOCUMENT_NAME: FITE_FPM_REQUEST_GENERAL_DA
I dont found this method L_MESSAGE_MANAGER->REPORT_T100_MESSAGE.
Please can give more suggestions for found the method
Thanks in advance
Regards
Carmen G.

How can delete the serve.bannersdontwork virus from Safari on Mac?

Hello @all,
How can delete the serve.bannersdontwork virus from Safari on Mac?
About every 8-20 clicks Safari opens a webside named serve.bannersdontwork.
I can not remove this with my Avira antivirus programm.
Can anybody help me?
THX
Hallo an alle,
Ich habe mir einen Virus eingefangen, serve.bannersdontwork, auf Safari.
Alle 8-20 clicks öffnet sich diese Seite "serve.bannersdontwork" und leitet mich auf andere weiter.
Über mein Antivirusprogramm Avira konnte ich den Virus nicht beheben.
Auch die erweiterung AdBlock hilf hier nicht weiter.
Wer weiß, oder hat eine Ahnung, wie man diesen Virus wieder los wird?
Danke schonmal im voraus!!

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the errant extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.

How can change the font in the script output and the data grid ?

How can change the font in the script output and the data grid in Sql Developer?

You can't easily unless you have the latest version (2.1.1).
If you do have this version then changing the font in the Tools/Preferences menu under the code editor/fonts section will also change the font of the data grid.
For details of changing the fonts in an earlier version then see Sue's post below.
http://sueharper.blogspot.com/2010/03/back-to-basics-changing-font-setting-in.html

How can define the cost center (department) manager?

We are on 11.5.0.10
Financials implementation is done(GL,AP,AR,FA,IA)
In iAssets System, we want to set up the approval method to use "cost center-based approvals". (For cost center-based approvals to work properly, each cost center must have a manager defined.)
How can define the cost center (department) manager? Thanks.

I believe this is done in the organization definition screen. For each organization, we attach a classification "Company Cost Centre" (the same place where we attach the classification operating unit, inv org etc). In the others section, there are 2 additional information - GL company cost centre and reporting information. In the GL company cost, you need to attach the balancing segment value and the cost centre value. In the reporting information, you need to attach the manager for that organization. This ay the relationship between the cost centre and manager is created.
Hope this clarifies.
Vinit

How can validate the ASM size and free space correctly?

Dears ,,
I faced problem in ASM size as it appeared in alert file as below
ORA-19504: failed to create file "+DG_DATA"
ORA-17502: ksfdcre:4 Failed to create file +DG_DATA
ORA-15041: diskgroup space exhausted
So we resize ASM space and large it. But we faced the same problem also although there is free space in ASM.
It seems that the shown free space is not real.
How can validate the ASM size and free space correctly?
Thanks & Regards,,

*Oracle DBA* wrote:
Dears ,,
I faced problem in ASM size as it appeared in alert file as below
ORA-19504: failed to create file "+DG_DATA"
ORA-17502: ksfdcre:4 Failed to create file +DG_DATA
ORA-15041: diskgroup space exhausted
So we resize ASM space and large it. But we faced the same problem also although there is free space in ASM.
It seems that the shown free space is not real.
How can validate the ASM size and free space correctly?
Thanks & Regards,,
I was having this problem. Im my case i couldn add datafiles to a tablespace despite the fact that i was having a lot of space in the asm. Try rebalancing. It might help. In my case rebalancing also didn work because it seems that there need to be a threshold space in all the disks for the rebalancing to happen which was not in my case, so i had to shrink some unused space in the tablespace and then after gaining the required space I rebalanced the disk and then the disks got rebalanced, also i was able to use the free space that was showing .

How can unlock the 4s or factory unlock

Similar Messages

Maybe you are looking for