How can unlocking possibly take so long with Orange Communications SA?

I bought a new Apple IPhone 3G without any price plan in Switzerland at an Orange Center and they told me to wait a couple of days until I get a message with an Activating Code in order for me to get my IPhone activated in Itunes with any SIM! Now I´ve been calling Apple and Orange a hundred times and they wouldn´t tell me how long this is going to take or who is in charge of it!!
My Phone is still not working/ can´t activate it over Itunes!!
Can anyone please tell me what the h**l makes them take so long to enter an IMEI-number in their fu**ing system to unlock an IPhone????!!
Message was edited by: Roland K.

I bought a new Apple IPhone 3G without any price plan in Switzerland at an Orange Center and they told me to wait a couple of days until I get a message with an Activating Code in order for me to get my IPhone activated in Itunes with any SIM! Now I´ve been calling Apple and Orange a hundred times and they wouldn´t tell me how long this is going to take or who is in charge of it!!
My Phone is still not working/ can´t activate it over Itunes!!
Can anyone please tell me what the h**l makes them take so long to enter an IMEI-number in their fu**ing system to unlock an IPhone????!!
Message was edited by: Roland K.

Similar Messages

  • How can I possibly get a hold with an actual person on the phone??? It's emergency!!!!!!

    Hello,
    I have been trying to talk to someone at the customer service for the last 3 months but no one never ever picked up my phone!!!
    How can this even possible?
    I've been using verizon for the last 4 years!!!
    I just moved out from the State and need to cancel my contract. That's why I've been trying so hard to talk to someone at the customer service.
    I went to a local store but they all told me that I need to call *611 (which no one ever answers... ) to cancel my contract.
    Why can't you guys just make this all easy and let local store do this job? It's such an easy job to cancel the contract and let me pay for the remaining fee.
    I wanted to cancel the contract since last MAY but unfortunately, I could not cancel it still and had to pay for my balance for nothing. It's not just couple cents. It was way over $100.
    I am getting really frustrated! LiveChat function never works too. It's never on even during working hour. What happened?
    Customer pays pretty high for Verizon's service compare to other mobile carriers. I should get a better customer service.
    Can someone PLEASE contact me and solve this problem before I get to the point where I need to pay EXTRA???
    Please email me (reply me back to my email please) and let me know what I can do and how I can talk to a real person at the customer service.
    Thank you for your time and help.
    Have a wonderful day.
    -Jiyoon-

    You have two ways to do this.
    Bring a copy of your last bill with your account number to a Verizon wireless corporate store (not a reseller )
    Tell them to close your account and get a copy of the transaction.
    However if done this way, you lose your cell number and access to the online portal. Verizon will mail you a final invoice.
    Or if you want service from AT&T, Sprint or T-Mobile they need your cell number, the pin number for your account and your account number from your invoice. They will port you over to their service, you keep the cell number and Verizon will send you a final invoice.
    This porting process can be done for prepaid services if that is what you want to do.
    You can call 1-800-922-0204 press option 4 then keep saying agent.
    And you can cancel that way.
    Good Luck

  • I sold my ipad 2 and didn't take out my apple id. how can i log off the ipad with out having it in hand?

    I sold my ipad 2 and didn't take out my apple id. how can i log off the ipad with out having it in hand?

    You can't. But the buyer more than likely restored it because he/she could not use your Apple ID.

  • How can I consolidate my itunes music with Windows Media Player?

    How can I consolidate my itunes music with Windows Media Player?

    Ah, did you move your media files by hand? Often doing so will have broken the links from iTunes to them.
    The "missing file" error happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, one of its parent folders, or the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to Get Info, then click No when asked to try to locate the track. (Due to a bug in iTunes 12 you currently have to say No twice!) Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, a folder renamed, or a drive letter has changed, it should be possible to reverse the actions. If the difference between the two paths is an additional Music folder in one path then this is a layout issue. I can explain further if that is the case.
    In some cases iTunes may be able to repair itself if you go through the same steps with Get Info but this time click Locate and browse to the lost track. It may then offer to attempt to automatically fix other broken links.
    If another application like Windows Media Player has moved/renamed the files then the chances are that subtle differences in naming strategies will make it hard to restore the media to the precise path that iTunes is expecting. In such cases, as long as the missing files can be found somewhere, you should be able to use my FindTracks script to reconnect them to iTunes. See this post for an explanation of how it works.
    tt2

  • How can I add header on printing with Numbers

    How can I add header on printing with Numbers? The previous version use to have it and I cannot find it in the new one ...

    Hi Tanya,
    Glad to hear that you found how to edit page headers and footers in Numbers 3.2. I agree that Help in Numbers 3 is woeful. No searchable PDF to download and use offline. All is online (one page at a time) and we need to know the terms we are looking for before we look.
    The first HelpDesk:
    http://www.youtube.com/watch?v=pQHX-SjgQvQ
    For printing to paper where layout is important, I use Numbers '09 (Numbers 2.3) with its Print View. But it is orphanware. As the name suggests, there has not been a major overhaul since 2009. With that in mind, it is a useful version to hang onto while we hope and wait (and provide feedback to Apple) for something in future versions of Numbers 3.x to provide better layout capability.
    Indeed, each new update of Numbers 3.x has restored more of the old features while adding new features that are enhancements over Numbers '09. Many of the Numbers 3 enhancements reflect long-awaited wishes through this forum, and were passed on by Numbers Feedback to Apple. So it seems that Apple does take heed of feedback.
    In the meantime, I enjoy the charm of Numbers '09 whilst exploring the new features of Numbers 3.
    What has been GAINED in Numbers 3 is here:
    https://discussions.apple.com/thread/5473882?start=75&tstart=0
    (Very long thread because it started with Numbers 3.0, and enhancements have continued through Numbers 3.2).
    Hints on workarounds in Numbers 3 is here:
    https://discussions.apple.com/message/23622372#23622372
    Some workarounds are no longer needed, but what amazes me is how many Numbers '09 features (the so-called "lost" features) were not lost; the settings have simply been moved. Moreover, many features such as margin settings carry over with a Numbers '09 document or template into Numbers 3.
    Hints for layout on screen before printing to paper:
    Try Alignment Guides and Rulers as suggested here:
    Print View workarounds
    Use a layout guide:
    Layout Guide for Numbers
    Regards,
    Ian.

  • How can I keep my batery longer?

    How can I keep my battery longer?

    None of the suggestions thus far have a significant affect on battery life.
    Screen brightness on Automatic is the best setting, as it provides only as much brightness as you need.
    WiFi uses ZERO power when the phone is on Standby, and minimal power when the phone is active. But if you are within range of a WiFi hotspot WiFi will use less power than Cellular data. So unless you have the phone actively being used for hours at a time the WiFi setting will make no difference.
    3G off will save some power in light use because GPRS uses less power but is MUCH slower. So if you are transferring a lot of data turning 3G off will actually use more power, since transfers will take 3-4 times as long and the difference in power consumption between 3G and GPRS is only 2 times.
    Bluetooth uses no significant power unless you are actively using a Bluetooth device, and then you would clearly want it on. BT runs at 3 milliwatts, hardly enough to matter.
    If you did all of the suggested things you might get an extra few minutes a day.
    If your phone is using a lot of power there are only 2 possible causes - Interactive games, and large data transfers. Nothing else on the phone comes close these two uses. FIRST you should determine if your power use is within spec for your paticular usage pattern. It probably is, but you can work it out for yourself by comparing your usage to the specs for the phone: http://www.apple.com/iphone/specs.html

  • How can we view the data asociated with Request ID

    Hi All,
    I have data loaded in an ODS there are multiple files loaded in this ODS. Now i want to view data for a perticuler request OR i want to know how can we know the data associated with a perticular request.
    Please help me out.
    Thanks & Regards
    Amit Kumar

    Copy the request number (not request ID) from the ODS manage screen, Goto RSRQ give the request number and execute. it shows the monitor screen- now goto PSA from the top and check the data. But this possible only if you are loading data to PSA also along with ODS.
    Otherwise, Goto Display Data of ODS from the right click on it -- in the selection screen give the Request ID that you want to check the data. Then it displays only that request data.
    Hope this helps.
    Veerendra.
    Edited by: denduluri veerendra kumar on Dec 1, 2009 12:40 PM
    Edited by: denduluri veerendra kumar on Dec 1, 2009 12:43 PM

  • How can I use my Apple ID with 2 Apple devices?

    I just got an ipad mini and I registered it with the same Apple ID I use for my iphone 4s. Everything was fine until I downloaded apps to the ipad and noticed that the ones I had on both devices  no longer opened on my iphone. Why is this? How can I use my Apple ID with 2 Apple devices and how can I recover my apps on my iphone?

    I've had an iPad for almost two years. When I purchased an iPhone last fall I set it up to use the same Apple ID as my iPhone. I've had no problems doing this. Try resetting each device and see what happens.
    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • How can i share my itunes purchaes with my wife who is working in Dubai  while I am in UK she is so isolated and this would mean a lot to us

    how can i share my itunes purchaes with my wife who is working in Dubai  while I am in UK she is so isolated and this would mean a lot to us

    Just email it.
    In iTunes, drag the file to the desktop.
    On the desktop, select the file right click Share > email.
    I just want to send my sister one song from my iTunes because its a recording of her daughter when she was 2. She no longer has the file and I only have it saved in my iTunes from a long ago. The only known file is the one I have saved on iTunes.
    You do make regular backups of your computer, correct?
    Use Time Machine?

  • I have a company Ipad that belonged to a deceased employee. no access to his icloud or appleID. how can I restore it for use with a new apple ID

    I have a company Ipad that belonged to a deceased employee. no access to his icloud or appleID. how can I restore it for use with a new apple ID?
    The apple ID was his personal account and can no longer gain access. Im sure I can get purchase recipts from the accounting department if needed. I tried to put the Ipad in restore mode and used itunes to "recover" the ipad but it still wont let me in because he registered the device with the "lost iphone" feature or whatever that is.

    Activation Lock in iOS 7  >  http://support.apple.com/kb/HT5818
    The Apple ID and Password that was Originally used to Activate the iDevice is required
    If you do not have that information you will not be able to use the Device.

  • How can I authorize an iPod Classic with my own Apple ID?

    How can I authorize an iPod Classic with my own Apple ID? It belonged to someone else so presumably it has been authorized with another id. Your help and answers are much appreciated.

    To make sure the file system is closed properly iPod classics should be ejected from the iTunes interface, or if iTunes isn't running, using the "Safely remove hardware" tool. That message is a standard warning. If the device shows up in iTunes you can configure the selection of media content that you want to sync to it and press the sync button to start the process. iTunes may spend quite a long time "thinking" before any tracks are copied over.
    If you think there might be something wrong with the device itself see Corrupt iPod classic for some troubleshooting tips.
    tt2

  • How can I see the whole week with calendar built-in app ?

    How can I see the whole week with calendar built-in app ? My husband has an ipad and he can see the whole week and the whole year... is it possible with iphone 4 ?

    What you see is what is available.
    Turning the iPhone into landscape mode with Month, Day, or List view selected provides the closest thing to seeing an entire week.

  • HT201272 How can I see the whole week with calendar built-in app ?

    How can I see the whole week with calendar built-in app ?  My husband has an ipad and he can see the whole week and the whole year... is it possible with iphone 4 ?

    You have posted in the itunes store forum.  This has nothing to do with the itunes store.

  • How can we serialize a c++ structure with an vector inside it in coherence using PofWriter?

    How can we serialize a c++ structure with an vector inside it in coherence using PofWriter?
    Any help is appreciated.
    Thanks.

    The link you gave was the same link that had already been given, and that points to an article about AIR 3.6.
    I’m not sure if AIR 3.9 has changed fundamentally with regard to this problem though, but here’s a work around someone used, to make the subsequent loads seem like a new file:
    https://gist.github.com/sportebois/6969008
    Would it be possible to just keep a reference to the loaded swf, after the first load? Then you can removechild it when you’re not needing it, and addchild it back when you do need it.

  • How can I possible lose my entire photo library/ referenced master image file if I have downloaded all my images directly onto Aperture?

    How can I possible lose my entire photo library/ referenced master image file if I have downloaded all my images directly onto Aperture?

    CeliaJane, you need to distinguish between the Aperture Library and the Aperture Application.
    Aperture stores your images in a database, and it is this database that we have to find and probably to repair, not the application (hopefully). And since you do not see any images, I suspect that Aperture created a new, empty Aperture Library,and you are now viewing this empty library. Usully the library sits in your Pictures fiolder.
    Look into your Pictures folder, if you see a file with a colorful icon with three pictures, called something.aplibrary, as shown above. And also enter ".applibrary" into the "Spotlight" searchfield in the upper right corner of your screen. If you have more than one Library, you should be able to find them this way.
    The largest file you find will probably be the correct library.
    When you have found the correct file called aperturexxxx.aplibrary, try to open it in "First Aid" mode.
    Select the Library and press down "command" and "option" key at the same time, while you double click the library.
    Now the First Aid dialogue should appear:
    Select: Repair Permissions" and see if you can open the Library again. If it did not help, try the other two options in turn.
    Regards
    Léonie

Maybe you are looking for