How can we automate compass rotation using UIAutomation

Hello,
I have to automate compass application using Instruments. How can this be possible?

Hi
I agree with the others!
Here you have a simple brute-force example.
Greetings
juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=
Attachments:
Add.zip ‏138 KB

Similar Messages

  • How can I automatically close a dialog box using Javascript after I click the OK button to submit it?

    How can I automatically close a dialog box using Javascript after I click the OK button to submit it? I don't want to have to X out of the dialog box after I am done.
    Thanks
    Linda

    JS can not interact with open dialogs in any way, unless it's a dialog
    created in JS using the Dialog object.
    On Thu, Jul 24, 2014 at 11:13 PM, lindaeliseruble <[email protected]>

  • How can I (automatically) import new photos of the photostream on my local disc (Mac)? Don't want to use new icloud service. Simply import.

    New Photo app on Mac.
    How can I (automatically) import new photos of the photo stream on my local disc (Mac)? Don't want to use new icloud service. Simply import.
    With iPhoto every new photo was automatically imported and saved on my local disk (with "full resolution" that's what I only need). In the new photo app I have still my photo stream and when I move a photo (drag and drop from the photo stream) to a new album it indicates a (plus). My understanding is that the photo is now copied to my local disk. But when I deleted the photo in the photo stream it was also deleted in the album !?
    If that is the case I can use the photo stream only until I reach the max of 1.000 photos, then I have to delete photos and I will have no copy left.
    How can I "physically" copy a photo of the photo stream to my local disk? I just want to "transfer" all pictures taken with Ipads, Iphones to my central storage on the Mac. Please don't propose to connect it via iTunes (cable) to the Mac.
    Any other suggestions?
    thx
    -Tom

    The amazing device cannot do it because no amazing developer has written an app for it.  There is some interest, others have asked, but i have a hunch that the market is fairly limited, and no developer has jumped at the chance just yet.
    Any sort of tethered approach means try to feed the material to the pad thru the cck.  Which means the app would have to use the allowed/existing cck pathway in a manner that does not violate the sandbox rules.  That may be the problem.

  • When using Mavericks, how can I automatically replace 'i' with 'I' when typing?

    When using Mavericks, how can I automatically replace 'i' with 'I' when typing?
    It was easy to do prior to mavericks using system preferences (language and text), but now I can only submit a 2 letter word to replace, not a 1 letter word. I have tried using a space but it doesn't allow that. I would assume that most people would love to be able to type quickly without having to make uppercase I all the time (first world problem i know), so I can't understand why apple have removed this feature.

    There is the shift key, or text replacement approach, providing you have enabled two things:
    Edit > Substitution > √ Text Replacement
    System Preferences > Keyboard > TextClick + to add a replacement
    Replaceii[spacebar]
    With
    I[spacebar]
    Press return
    Quit System Preferences
    Now, when you type ii, you will see a pop-up offering I.
    In the OS X App Store, search for WordService. This free collection of Services will enable you to just type your content, select it, and then choose the Service item, “Initial Caps of Sentences.” It does what it says.

  • How can u have lock rotation off and mute feature off at the same time

    How can u have lock rotation off and mute feature off at the same time

    Maybe this will help. The link at the bottom is the same one that was posted above.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • How can i automate .pdf output and organize by color/bw?

    how can i "automate" multi-page .pdf output to preflight/imposition software workflow, organized by color/bw?
    basically what i'm trying to do is create a simple output function from InDesign that allows the user to just export a multi-page .pdf into a hot folder and on through preflight and imposition software. i want to be able to tell the hot folder which pages are color -so it can separate, rename and direct color pages to a color queue and b/w pages to a b/w queue.
    i've researched indesign distiller presets and the Acrobat JDF but the JDF isn't really meant for this exact purpose and doesn't help reduce the number of steps currently necessary to manually output/rename/etc.
    is there another way that i can embed information into a .pdf that could be read by a hot folder?

    You might check out this third-party plug-in for InDesign. It may or may not help you (I've never used it). I just saw it on the new Adobe Exchange (beta in Adobe Labs). Here's the description:
    Output Factory automates printing and exporting from Adobe InDesign. Export as single pages with variable file names, output layer versions, update modified links on the fly, preflight InDesign files before output, output to several format at once and much more.
    Just select the documents, adjust settings and Output Factory will do the rest for you. Keep working with other programs while Output Factory processes InDesign files in the background. Or leave it working overnight to output hundreds of documents, and the job will be done when you return in the morning.
    Key features:
    • Output multiple InDesign files automatically
    • Output as single pages
    • Automate printing and exporting to PDF, PostScript, EPS, Flash, IDML, EPUB and several image formats
    • Output files to multiple formats at once
    • Layer versioning: output layer combinations as single files
    • Update modified links automatically
    • Variable output file names
    • Preflight InDesign files and final PDFs
    • Supports books and booklet printing
    • Send output files over Internet and locally
    • Detailed output history
    System Requirements:
    - Adobe InDesign CS3-CS6
    - Mac OS X 10.5 and later, Intel-based Mac

  • How can I automate the multi-step process of looking up a caller's contact details when a telephone call comes in with caller ID?

    How can I automate the multi-step process of looking up a caller's contact details when a telephone call comes in with caller ID. I want to be able to see more than just the first & last name when a client calls me. I would like the caller ID to pull up the same information that shows up when you search for and find a contact name and then click on the right arrow.
    My workaround is to force/enter both the last name and the address in the last name field since then the address will show up.
    The only computerized way to look up this additional information is to put the client on hold, memorize the first and last name and correctly enter it in the search field of the contact database and hopefully find it before the client gets tired of waiting.
    Note that I go to about 48 small jobs per week. So far I have about 9,000 contacts. It's easy to make a mistake and have the client wondering what I'm doing and what's taking so long.
    The second workaround is to use paper and pencil and ask the client for name, address, cross street and phone number again, repeating what I did some time previously.
    Please help meautomate this process.

    You don't have to put anyone on hold. When the call comes in, tap the Home button, then tap contacts, go to the contact. Tap Home button when finished, tap the top banner to return to the call screen.

  • How can I automatically have a new tab always be a copy of the current active tab?

    The add-on extension "NewTabURL" (by "sogame") provided the option I want and used for a number of years. But it stopped working when Firefox was updated to version 16.0. When I click for a new tab, all I get is a completely blank tab. How can I automatically have the new tab always be a copy of the current active tab?
    Can the extension "NewTabURL" be revised to work in version 16 and/or version 17? If not, how else can I get the new tab functionality that I desire? I can't seem to find any other extension that provides that functionality.
    Milt Beychok

    My trackball has 4 buttons and a scroll wheel. Each of the 4 buttons is programmable. The 4 buttons are normally pre-programmed for single-click, double-click, drag and right-click by simply pressing on them
    Each of the 4 buttons may be programmed to also have other functions. For example, I programmed "control/single-click" to produce a middle click. I could also have used "shift/single-click" or "alt/single-click" to produce the middle-click. Or I could have similarly programmed double-click or drag or right-click. The Kensington Expert Mouse is quite versatile ... once you get the hang of programming it.
    I have had it for about 4 years and I had never had the need to program one of them until you told me about using a middle-click.
    Milt Beychok

  • How can I automatically redirect users to the correct platform?

    Hi,
    I have built my website three times, once for desktop, once for tablet and once for mobile phones. My question is how can i automatically redirect the user to the correct site depending on which device they are using.
    I have read that they can be redirected to a separate domain name such as m.example.com for mobile, I have also read that a lot of large corporations use this approach as well.
    Any help would be great!
    Cheers guys

    Most corporations nowadays are moving towards responsive designs with a mobile first approach.  This tends to be the most efficient and compatible since there is no need for javascript or other scripts to redirect users.
    The following is a simple example for phones and desktops only, and most examples I was finding were that way due to their publishing date.
    http://css-tricks.com/snippets/javascript/redirect-mobile-devices/
    The trick is going to be getting lists of devices and resolutions to make sure they are all captured which can be a major pain since that information updates all the time.  With that said, if I were you doing it this way I would do away with the tablet version.

  • Apple Mail: How can I automatically set a signature, depending on the sender, NOT on the account?

    Apple Mail: How can I automatically set a signature, depending on the sender (have several for one account), NOT on the account?
    I have some comma-separated senders in my Apple Mail accounts, some for business, some for private (using the same account). When I'm sending a business mail, I would like to append my business signature, when I send a private one, either nothing, or a fun signature.
    Best,
    Berlin1892

    karenbee,
    Here's the solution for PCs: Tools>Options, then click Sync in the Options window. Good luck.

  • How can I automatically create the files with serie-name?

    Hello, Everyone,
    I have a question again.
    How can I automatically create the file with a serie-filename?
    e.g. I have a program, it will repeat 5 times, and every time it will create a bmp-file, and I want to let this program automatically save these 5 files with a Serie-filename like File001.bmp, File002.bmp, .... File005.bmp.
    How can I do it?`
    Thanks a lot.
    Regarts,
    Johnny

    Hi Deepu,
    one more comment
    The format code should be "%04d" to get leading zeros and have filenames with same length...
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • How can I automatically deploy certificates to iphones

    How can I automatically deploy certificates to iphones from an internal Windows Certificate Root Authority?  I want to use device certs with a combination of username and password in order to access a secure wireless network.
    I have this working fine with AD joined Windows PCs - I am just having trouble doing the same for our many iphones.
    Many thanks in advance

    Most corporations nowadays are moving towards responsive designs with a mobile first approach.  This tends to be the most efficient and compatible since there is no need for javascript or other scripts to redirect users.
    The following is a simple example for phones and desktops only, and most examples I was finding were that way due to their publishing date.
    http://css-tricks.com/snippets/javascript/redirect-mobile-devices/
    The trick is going to be getting lists of devices and resolutions to make sure they are all captured which can be a major pain since that information updates all the time.  With that said, if I were you doing it this way I would do away with the tablet version.

  • FAQ: How can I invite others to use GroupPix?

    FAQ: How can I invite others to use GroupPix?
    Answer:
    GroupPix has two methods for adding others: 'Email invite' and 'Scan Pass'
    Email
    Email invitations work great before the event, because they allow others to install the app and join the Group Album ahead of time. There are two ways to invite someone via email. First, you need to go into the Group Album you created by tapping its icon from the main screen ('Grouppix party' is the example shown below):
    Then do one of the following:
    1. Tap the 'Add Friends' button in the lower right corner, then tap 'Invite with Email'
    2. Alternatively, you can tap the settings icon in the upper-right hand side to bring up the settings for the album, then tap 'Email Invite':
    Enter the email address of the person that you want to invite, then tap the blue invite button in the upper-right corner of the screen.
    If your friend does not have GroupPix already installed, the email contains a link to install the app from the App Store
    If you friend does have GroupPix already installed, the email has a link to launch the app, or your friend can just launch GroupPix without the email, and accept the invitation directly in the program.
    Scan Pass
    You can use the Scan Pass feature to add someone to an event on the spot. You (as the Group Album host) and the person you invite, each follows these directions, respectively:
    (You) Go into your Group Album, and tap the settings icon in the upper-right hand side to bring up the settings for the album, then tap 'Scan Pass' to switch GroupPix into Scan Mode:
    (Them) After installing the app from the App Store, launch the app, then tap 'Join' to show their GroupPix Pass:
    (You) Scan the other person's pass, carefully focusing on the square black and white code on the pass (circled in red above); once scanned, the other person will automatically be added to the Group Album, and photo taking can begin!

    If you are using icloud, make sure calendar is turned on.   Then you can invite others when you schedule an appointment.

  • How can you automate the monthly opening of MM periods

    How can you automate the monthly opening of MM periods ????????????

    RMMMPERI accepts a period/year or a date.
    If you enter a date the period is derived by it.
    1. create a variant and check the attribute 'selection variable' for the parameter date. Then click the button 'Selection variables' and set the current date. Every time this variant is used the parameter DATE is filled with the current date.
    2. create a job for RMMMPERI with the variant created in the preceding step. Set it as periodic.
    If you're not using a fiscal year variant simply schedule it as monthly (to be executed the first day of the month).
    If you are using a fiscal year variant you'd have to define a calendar with only the first day of each period defined as working 
    day and use it in the periodicity restrictions.
    Another possibility:
    Write a very simple ABAP which run daily to check if the period has changed and submit RMMMPERI.
    Regards
    Chander

  • How can my wife and I use our two iTunes account on one iPad

    How can my wife and I use our two iTunes accounts on one IPad

    Unfortunately it will be difficult. iPads are personal devices like phones and done have credentials. You can of course log out of and into the app store to download purchased apps but the iPad will then have all the apps of both your wife and you (though you could put these into folders I guess).
    /H

Maybe you are looking for