How can we automate the Post system refresh activities
All,
Just want to know if there is a way to automate most of the post system refresh activities that were done by Basis.
Please note that i am talking about Post System refresh activities.
Appreciate your responses.
Thanks,
Giri
It all depends on what you would like to do: you keep the same SID or is it a rename?
- you could plan 1 jobs on production after event 'Zafterrefresh" with following steps:
that runs a BDLS
that does a cleanup of the spools
cleanup application logs
Trigger the event after the refresh and that starts.
Depending on your system you can run multiple jobs in //
some actions will have to be done manually:
user import
TMS config
etc
Similar Messages
-
How can we automate the Depreciation keys based on production for business
How can we automate the Depreciation keys based on production for business u2013 this is currently not an optimised process if we expect business to manually change the keyu2019s on a monthly basis.
The end user updates the table, transaction AO25, manually on month end after the production calculations are completed. The question is, is it possible when the PP is completed, that the system updates the Period Unit table for that period?
Thanks.
Regards,
PS PSHi,
I am new at this, so I need a explanation on how will this help me, and how do I get about doing this?
Thanks a lot.
Regards,
PS PS -
How can i see the posts that i answered?
How can i see the posts that i answered?
Actually i some others post for a VLAN.. now i need that post ... but i'm unable to find it...
Can someone please help me in this ?
Regards,
ChanduI probably do not fully understand your question. Based on what I think I understand I offer these suggestions:
- if you click on your profile, or using the account link on a forum page select profile, then at the bottom of the information of your profile is a list of the responses that you have made. But it displays a limited number of responses.
- if you use the search feature of the community you might find it by searching on your name, or better to search for some term that was used in the response.
HTH
Rick -
I have Mac OS X 10.5.8. How can I upgrade the operating system?
I have a Mac OS X 10.5.8. How can I upgrade the operating system so I can get i Life 11?
You will need Snow Leopard which is available as a retail disk for $29 from the Apple store or online resellers. Make sure your Mac meets the system requirements; 1 GB RAM is the absolute minimum - 2 GB would be better.
-
How can we reset the active system status when we are trying to change
Hello SAP,
I am using the transaction code 'CJ20N' .
For this transaction code, I need to put one validation when user is trying to change the system status to 'TECO'.
Once, user changed the system status and trying to save , we need to put the previous system status.
For e.g. : system status is 'REL'. Now user set to 'TECO' and CLICK on save button, system status need to change 'REL'.
Could you please explain me that how can we delete the buffer system status 'TECO' and reset to active status 'TECO '.
Thanks and Regards
SriniYou can't delete an account, you can only stop using it. If you're getting that error message you won't be able to create a new account on your device. Your only options are to re-use one of the accounts previously created, or create a new account on a different iOS device or Mac (running OS X Lion or higher), if you have one.
-
How can I automate the multi-step process of looking up a caller's contact details when a telephone call comes in with caller ID. I want to be able to see more than just the first & last name when a client calls me. I would like the caller ID to pull up the same information that shows up when you search for and find a contact name and then click on the right arrow.
My workaround is to force/enter both the last name and the address in the last name field since then the address will show up.
The only computerized way to look up this additional information is to put the client on hold, memorize the first and last name and correctly enter it in the search field of the contact database and hopefully find it before the client gets tired of waiting.
Note that I go to about 48 small jobs per week. So far I have about 9,000 contacts. It's easy to make a mistake and have the client wondering what I'm doing and what's taking so long.
The second workaround is to use paper and pencil and ask the client for name, address, cross street and phone number again, repeating what I did some time previously.
Please help meautomate this process.You don't have to put anyone on hold. When the call comes in, tap the Home button, then tap contacts, go to the contact. Tap Home button when finished, tap the top banner to return to the call screen.
-
How can you automate the monthly opening of MM periods
How can you automate the monthly opening of MM periods ????????????
RMMMPERI accepts a period/year or a date.
If you enter a date the period is derived by it.
1. create a variant and check the attribute 'selection variable' for the parameter date. Then click the button 'Selection variables' and set the current date. Every time this variant is used the parameter DATE is filled with the current date.
2. create a job for RMMMPERI with the variant created in the preceding step. Set it as periodic.
If you're not using a fiscal year variant simply schedule it as monthly (to be executed the first day of the month).
If you are using a fiscal year variant you'd have to define a calendar with only the first day of each period defined as working
day and use it in the periodicity restrictions.
Another possibility:
Write a very simple ABAP which run daily to check if the period has changed and submit RMMMPERI.
Regards
Chander -
I have bought Mac Os X Mauntain Lion Operating System for my mac book pro some time ago.I then reinstalled my system.The original operating System on my Mac is 10.7 Lion. Now I cannot download Mac Os X Mauntain Lion Operating System.It says"This product is not avaible for Turkish App Store".How can I get this Operating System?
http://www.apple.com/tr/support/
-
how can I downgrade my operating system as my bluetooth work ok with my holde commodore on the 4.2.1 system but now it is upgraded to the latest system it does not operate properley
thankyou but it looks like we won't be buying another iphone
-
How can I use the POST form in defining a SAMLCredentialMapperV2
Hi,
I am trying to configure the SAMLCredentialMapperV2 in our WebLogic Portal 10.3.2. There is a parameter called "POST form -
The POST form used with this SAML Relying Party". Can anyone give me a hint of how I can use this form parameter, where I have to deploy this form
and where can I find documentation about those parameters.
Any help would be appreciated.
Best Regards
EdmundAs far as i remember his parameter was optional
http://www.oracle.com/technology/pub/articles/dev2arch/2006/12/sso-with-saml.html is probably a better article, dont know if has any updates since this was written for 9.2 -
How Can I change the default system editor to use it on Eclipse?
Hi, I want to know something. In Eclipse, when I do the following with a file: Open With -> System Editor, GVIM is opened, and I would want to change this behaviour to another editor.
How Can I perform this?
GreetingsDavigetto wrote:
It doesn't work to eclipse... I don't know why, always gvim is opened... If I uninstall gvim, eclipse give me an error telling to me that was impossible to open the system editor.
The variables mentioned above initially were empty (without content).
Any more ideas?
Greetings
I'm pretty sure those ENV variables are only used for terminal / console operations, not GUI functionality. I think the confusing issue here, perhaps, was that Eclipse calls the option 'system editor.'
What it is referring to, instead, is the application set in your file manager for opening a particular file type. For me, it opens Scite, as I have Scite set in Nautilus to open most 'text' types. However, I can change the behavior to open Komodo Edit for *.py files by simply right clicking on any *.py file, selecting 'Properties' and setting the appropriate editor in the 'Open with' tab. Now *.py files open in Komodo in any circumstance, including selecting 'Open wirh > system editor' in Eclipse.
The procedure will be slightly different depending on your DE / file manager.
Last edited by MrWeatherbee (2007-12-01 10:26:56) -
How can I find the posted data in XI
Hi ,
In my scenario Vendor data is posting into SAP from File Adapter. When I saw in Runtime workbench or sxmb_moni , i am not able to find the exat data according to Datatype created in XI. How to findout exact data we received from the FTP server.
Regards,
AnjaneyaHi,
U can even find the message in the RWB.
1. Select communication channel monitoring.
2. Select the file adapter and click the use filter button.
3. Click on the mesage id.
4. In the new window click on the Message Content tab.
5. Select the payload option in the Message part drop down menu.
Regards
San
Remember to set the thread to solved when you have received a solution there is a Way. -
How can we automate the process of selective deletion in process chain
Hi,
I got to delete data from ODS and InfoCube selectively every Tuesday. So I am aware that there is an ABAP program through which we can automate the process of selective deletion in Process chain. So plz let me know the proceedure to automate this process.Hi,
Try this.
Need to genrate the deletion program using tcode Delete_Facts.
steps : 1 run the Delete_Facts tcode and give your cube name in the input parameter
step2 . select deletion program and execute . you will get the system genarated program
step 3 copy this prg and save as zprg.
step4 : run the program with selection
step 5. if your selection is date then you need to create dynamic varient needs to be populate the value for the date fields
step 6: you need to maintain the date values in the TVAR table if necessary
step 7. you need to use this custom prg in your process chain after completion of test
source : SDN.
Thanks,
JituK -
How can I reverse the posting generated by MF47 or COGI?
Hi,
Using transaction MF47 I have generated a posting document. But when I ran MF47 I did it with the wrong posting date, so the accounting document generated by transaction MF47 has the wrong posting date. I would like to reverse the document generated by MF47 in order to run MF47 afterwards with the correct posting date. Is it possible? I have try to reverse it using MF41 but I do not see the document generated by MF47 in order to reverse it.
Thank you very much,
ArianaHi,
It is not possible to reverse the MF47 entry or COGI entry. Once it is cleared means that's all. May be you can try with cancelling the material document and once again you can try with the backflush. But this will not create any COGI entries reversal or MF47 entries reversal.
Regards,
V. Suresh -
BASED ON QUEUE NAME HOW CAN WE FIND THE SENDER SYSTEM IN ECC
Based on queue name how to identify the sender system
the issue is
Messages are are coming from pi to ecc , check below queues. These are incoming queues
to Ecc from PI. We are trying to find what these queues are. Sometimes these
are failing and we are not able to process,
Based on the above information we need to find the sender system from where it is coming.
Regards
MADHUHi srinivas- Thanks for your reply and there is no issue on pi side after reaching to ecc the entries got stucking in smq2 of ecc system now the target system wants to know on which sender system these messges are coming we are not finding sender system detials from smq2 of ecc system .
Regards
Madhus
Maybe you are looking for
-
Solution Manager 4.0 Re-Configuration
hi everyone, I am trying to re configure my Solution manager 4.0. I have deleted my previous business client 100, and created a new one using client copy 000. I now have a fresh client 100 in my solman, SOLCLNT100. My problem now is, in tcode SMSY,
-
Hi: in the new IPhoto, is it possible to change manually the name of the months or of the days? I'm from Catalunya, a country inside Spain that has it's own language (catalan) wich, of course, it's not on the list of languages avaliable. Thanks.
-
Why charged me twice for the same item? They have withdrew money from my bank account for the second time about half an hour later after the transaction was completed leaving me overdrawn.
-
"Enter in role" button missing in BEx Analyzer 7
Hello all, I cannot see the button/option to enter an existing query into an existing role. I simply do not see the button "Enter in Role" in BEx Analyzer 7. I have SAP_ALL / S_RS_EXPL_A / S_USER_AGR access. I do not want to do this thru Designer or
-
Using html:select with mutiple
hy, guys!I need some help:I am developing a form were I use a heml:select wich have to use the mutiple selecting function( the user could select more then one option)it looks like this: <html:select property="sectors" multiple="true" size="3" ><html: