How can we avoid cloning an object?

how can we avoid cloning an object?

maddy123 wrote:
writing a singleton class but i want avoid the client to implement the cloneable for creating objectsHuh? What makes you think that's going to happen? Sounds like you have trust issues amongst developers, which would be better fixed by non-technical means

Similar Messages

  • How can I avoid rendering objects outside of the page?

    Hi,
    I have a few big objects in my webpage that stretch the boundaries of the page in preview mode. How can I avoid rendering those parts that are off the page?
    Thanks,
    Hadi

    Hi Hadi,
    You need to resize the image to fit the page to avoid it rendering outside the page.
    Regards,
    Aish

  • How can I avoid the display of ORA-31684 during impdp import?

    Hello,
    I'm working on a cross-platform tablespace migration (from SunOS to RedHat Enterprise Linux).
    During the import with DataPump, I have several ORA-31684 error messages ("Object type TYPE : "OWNER"."OBJ_NAME" already exists"). Some of my TYPE objects exist already in the Linux instance of the DB. The messages appear only for 4-5 TYPE objects, while overall I have around 180 TYPE objects owned by the schema owner.
    How can I avoid the display of these error messages? I don't want to drop the TYPE objects individually from the Linux instance, as the object list may vary in time.
    Thank you,
    Adrian

    Hi,
    There is no way to tell the impdp to ignore those errors. They will be printed to the error log and to the screen where the job is being run.
    Dean

  • How can I avoid referencing nilvce.dll

    Dear all
    When I build an application from my project LabView asks for nilvce.dll. As this DLL is not installed on the computer I press ignore item and LV goes on build the application. Finally the execute is successfully build and I can execute it. How can I avoid referencing nilvce.dll?
    But I observe that this executable is consuming almost all processor power while waiting for GUI-events. This does not occur in the development system and there is no wait missing in any of the loops in the program. Occationally the program hangs while executing Enqueue Element At Opposite End.VI from the Queues palette.
    Is there a link between these topic and referencing nilvce.dll?
    Regards,
    Jörn
    P.S.: I am working with LabView 8.6.1f1
    Message Edited by Jörn on 2009-11-10 10.11.2009 11:17 AM

    Hi muks,
    you could have known from this threat that your tip does not exactly meet the point. nilvce.dll does not exist. But it is referenced by some elements. I suspect that these elements might cause my other problem. And furthermore building the executable and running it (up to some point) works without having this DLL on my computer. So would like to gather some information about the objects referencing nilvce.dll in the hope that I can remove them to get rid of my second problem.
    Regards,
    Jörn

  • How can i avoid EOFException?

    Dear Friends,
    here raf is RandomAccessFile
    and Record is Object
    my doubt is when i execute is code, it was executed. and also it throws EOFException. i know what is the problem(EOF)
    how can i avoid this exception ?
    please give corrected code..............
    boolean _bolVal = true;
    while(_bolVal)
    try
    objectSize = raf.readInt();
    System.out.println("The Object Size : " + objectSize);
    byte[] byteData = new byte[objectSize];
    raf.read(byteData);
    ByteArrayInputStream bais = new ByteArrayInputStream(byteData);
    ObjectInputStream ois = new ObjectInputStream(bais);
    Record auditObject = (Record)ois.readObject();
    catch(EOFException e)
    _bolVal = false;
    e.printStackTrace();
    Thank You

    Don't read past the end of the file.
    If you don't know how long the file is or which is the last record, you can't avoid EOFException, and there's no reason why you should try. That's what it's there for, to tell you that you're reading past the end of the file.

  • How can we assign sproxy generated objects to a different package?

    Hello Expert,
    We need to change the package assigment of sproxy generated DDIC objects. How can we assign sproxy generated objects to a different package?
    Regards,
    Thulasi

    Any idea?

  • Hi. I purchased a new ipad mini and my brother already has iphone 4,so how can i avoid sharing the same contents that are on his phone? Will creating an other apple id help us in seperating our facetime and icloud accounts as we share our laptop to sync ?

    Hi. I purchased a new ipad mini and my brother already has iphone 4,so how can i avoid sharing the same contents that are on his phone? Will creating an other apple id help us in seperating our facetime and icloud accounts as we share our laptop to sync ?

    Have a read here...
    https://discussions.apple.com/message/18409815?ac_cid=ha
    And See Here...
    How to Use Multiple iDevices with One Computer

  • How can i avoid restarting tomcat server when servlet is modified?

    please advice me that how can i avoid restarting the tomcat server, whenever a servlet file is modified in my application. is their any way ?

    No probs. Here's how I do things...
    1. Install tomcat as normal (e.g. I install to C:\Apps\jakarta-tomcat-5.5.4)
    2. Create a webapps directory in your eclipse project with the following directory structure
    MyEclipseProject
       - src
       - conf
       - webapps
          - MyApplication
             - META-INF
             - WEB-INF
                - classes
                - lib
                - pages3. Set the project's output folder (e.g. bin folder) to webapps/MyApplication/WEB-INF/classes
    4. Put all your jar files in the lib directory
    5. Put JSPs / HTML in the pages directory (you may also want to create additional directories for TLDs, config files etc)
    6. Ensure your web.xml is in the WEB-INF directory
    7. Although it isn't essential I create a context.xml file and store it in META-INF, e.g.
    <Context reloadable="true">
        <!-- Default set of monitored resources -->
         <WatchedResource>WEB-INF/web.xml</WatchedResource>
         <WatchedResource>WEB-INF/conf/struts/struts-config.xml</WatchedResource>
         <WatchedResource>WEB-INF/conf/struts/tiles-defs.xml</WatchedResource>
         <WatchedResource>WEB-INF/conf/struts/validation.xml</WatchedResource>     
    </Context>I use this to set monitored resources that will trigger an automatic appliation reload and to configure JAAS (not shown). See the Tomcat documentation for additional information.
    8. In the 'conf' directory I create a server.xml file used to configure Tomcat (you can copy the one from your <TOMCAT_HOME>/conf/server.xml).
    After copying the file change appBase attribute in the host element to be the full path to the webapps directory. You can also change the HTTP and HTTPS ports if you wish
    9. Download and install the Tomcat Launcher plugin from Sysdeo.
    10. In Eclipse's Preferences menu you will see a new entry for Tomcat. Click this then
    a. Set your Tomcat Version
    b. Set your Tomcat Home
    c. Set "Context declaration mode" to server.xml
    d. Set the configuration file to the full path to your server.xml file created in step 8
    On the "Advanced " sub page select all relevant projects to add to the Tomcat classpath
    On the "JVM Settings" page add all the jars in your WEB-INF lib directory to the class path
    On the "Source Path" page select all relevant projects
    Now if you start Tomcat using the Tomcat icon, you will be able to remote debug your application. If you change web.xml (or any other file in your context.xml watched resources) it will automatically reload. Any changes to JSPs will automatically be picked up (providing your tell your browser not to use the page in cache - e.g. CTRL+F5 in IE)
    There are some limitations that I'm still working on however. Primarily that I haven't included the Tomcat Manager application in my webapps directory, so Sysdeo cannot perform a reload. This means that if I change a source file, and eclipse auotmatically rebuilds, Tomcat doesn't pick up the change unless I either change a watched resource file (e.g. web.xml) or stop and restart Tomcat.
    There's no reason why this can't be fixed, I just haven't got round to it yet.
    I'm sure there are lots of other (probably better) ways of achieving the same thing. This was the first method I tried and it worked, so I stuck with it. I'm not a Tomcat config guru and I'm sure other forum users could provide some improvements should they wish.
    Post if you get into trouble, however I won't be able to respond until next week.
    Cheers,
    Steve

  • I have made a book of my I Photo pictures. In certain layouts there is a textframe. How can I avoid the frame becoming visible in the print if I don't want to write anything? Should I just leave it or should I delete the text "Write your text here" ?

    I have made a book of my iPhoto pictures. In certain layouts there is a text frame. How can I avoid the frame becoming visible in the print if I don't want to write anything?  Should I just leave it untouched or should I delete the instructing text "Write your text here"?

    Most pages have layouts for pictures only or pictures with text boxes. Either select the same layout for that page but the one without the text box or put a space in the text box.
    Putting a space in the text box will avoid getting the warning when ordering that there's an unfilled text box in the book. The box will not be visible in the final product.  You can and should check the book before ordering by previewing it as described in this Apple document: iPhoto '11: Preview a book, card, or calendar before you order or print it
    Happy Holidays

  • How can i access all the objects of one schema from another schema

    Dear All,
    How can i access all the objects(Tables,Views,Triggers,Procedures,Functions,Packages etc..) and do the modifications of one schema from another schema (Without using synonyms concept).
    Thanks in advance,
    Mahi

    First of all, synonyms only help you easy reference the object. It doesn't have any implication of object privilege.
    As long as you have proper privilege on target object. You can access it with or without synonyms.
    Assuming you have proper privilege of objects, you can use following command to assume schema owner.
    ALTER SESSION SET CURRENT_SCHEMA = Schema_owner

  • How can i reference a MIME object within a correspondence format through...

    how can i reference a MIME object within a correspondence format through TX oofo or se71?
    Hi, I need to put a MIME object within a correspondence's format that i've already done through Tx oofo. My problem is, that i don't know exactly how can i make the reference of that MIME object in the format? and What structure type do i have to use in order to make appear the MIME object in my correspondence's format? Does anybody can help me with this?   
    Regards    Hector

    Frank,
    I tried to find some examples/samples on how to create CollectionModel for a table component but not successful.
    Can you clarify the following ?
    1. "CollectionModel" is referenced only by af:table attributes "value", "selectedRowKeys" and "selectionListener".
    The rest of af:table attributes such as "rows", "fetchSize" used to reference the iterator binding in the binding container via the EL expression "#{bindings.VOIteratorBinding.xxx} .
    What should I replace that EL expression with?
    2. I heck out the bean method to create the CollectionModel as following, is it close to what you mean?
    public void initBusinessDataDashboardView() {
    OperationBinding operation = BeanUtils.getOperationBinding("getPanelBusinessData");
    Map params = operation.getParamsMap();
    Key panelKey = getPanelInfoView().getKey();
    params.put("panelKey", panelKey);
    params.put("maximizedView", false);
    panelView = (ViewObject)operation.execute();
    // Heck code to create CollectionModel
    RowSet rowSet = panelView.getRowSet();
    ArrayList rowList = new ArrayList();
    while (rowSet.hasNext()) {
    rowList.add(rowSet.next());
    model = new ChildPropertyTreeModel(rowList, null);
    // To be used to set up af:table value, selectRowKeys, selectionListener via EL expr #{backingBeanScope.MyBean.model.xxx}
    public CollectionModel getModel() {
    return model;
    Am I on the right track?
    Edited by: Pricilla on May 4, 2010 2:20 PM

  • How can i create a custom object 0REQUID

    Hello all,
    I have a question. How can i create a custom object 0REQUID? Is it possible to create it without actvating BI content?
    Thanks in advance..

    Hi,
    If you want to create a new info object which is a copy of 0REQUID. then
    Go to > info object key figure / Chara catalogue> create new key figure / Chara --> enter 0REQUID in front of TEMPLATE and you will get all details of 0REQUID in your new key figure / chara.
    Hope this helps.
    Assgn pts if helpful.
    Regards
    Edited by: chintamani deshmukh on Apr 14, 2008 11:09 AM

  • How can I avoid (on a mac) getting called on Skype...

    How can I avoid (on a mac) getting called on Skype when I'm not signed in?
    It's really annoying.
    I'm not sure if it's supposed to be that way, but suddenly I get the skype-calling-sound, and I have to log into the skype app to abort the call. The persistent calling bastards kept on calling after I aborted the call and left the app, so I ended up muting my speakers for a while. It really shouldn't have to be this troublesome.

    That's like asking how many cows can I get into a field.  It depends on the size of the field, size of the cows, the terrain of the field, etc.  We could use a bit more information on what you're trying to accommplish:
    1 - where are the photos being downloaded from.
    2 - how big are the photos?
    3 - where are you going to put the photos, i.e. into folders, into an iPhoto library?
    4 - how big is the hard drive in the Mac Pro and how much free space do you have on it?
    etc., etc, etc......

  • How can i avoid displaying runtime error in intractive report

    hi gurus
    my question is, in interactive report when i reach 20th secondary list after that am getting runtime error when i click again. So i wanted to know how can i avoid that run time error.
    regars
    imran

    Hi Imran,
    Basically we can have one basic list and 20 interactive lists.
    Once when we reached to 20th list then it goes to shortdump.
    So, inorder to avoid that we can modify the system field
    SY-LSIND.
    Just see this example and try this. I hope this will be useful for you.
    REPORT  ZSAMPLE1111.
    data: begin of itab occurs 0,
            matnr like mara-matnr,
            mtart like mara-mtart,
            mbrsh like mara-mbrsh,
            end of itab.
    data: begin of jtab occurs 0,
          maktx like makt-maktx,
          spras like makt-spras,
          end of jtab.
    select matnr mtart mbrsh into table itab from mara up to 10 rows.
    loop at itab.
    write:/ itab-matnr, itab-mtart, itab-mbrsh.
    hide itab-matnr.
    endloop.
    at line-selection.
    select maktx spras into table jtab from makt where spras = 'EN' .
    case sy-lsind.
    when '1'.
    loop at jtab.
    write:/ jtab-maktx, jtab-spras.
    endloop.
    when '20'.             * changes see here.
    sy-lsind = 1.
    when others .
    write:/ 'name',sy-lsind.
    endcase.
    I hope this will be helpful for you.
    <REMOVED BY MODERATOR>
    Cheers,
    Swamy kunche
    Edited by: Alvaro Tejada Galindo on Apr 15, 2008 4:01 PM

  • How can I avoid a full scan when ...

    Hello
    How can I avoid a full scan with I apply the aggregate function "MIN"
    SQL> select min(c1) from hh;
       MIN(C1)
             1
    Execution Plan
       0      SELECT STATEMENT Optimizer=CHOOSE
       1    0   SORT (AGGREGATE)
       2    1     TABLE ACCESS (FULL) OF 'HH'Regards
    James King

    The table 'hh' does not have statistics. Assuming that there is an index on the column c1, statistics are computed on the table and its indexes, you may see a
    INDEX (FULL SCAN (MIN/MAX)) of the index on column 'c1'.

Maybe you are looking for