How can we block the asset class for company code
Hi Experts,
At what level we can define asset class and how can we block the asset class for particular company code in group company
Regards,
Harish
Dear Harish,
You can block the asset through OAOA at asset class level blocking at Asset Class level, and same you can block for creation at a chart of depreciation level from AM05.
And for additional acquisition you can block from AS05. I hope this will solve your issue. If you have doubts feel free to share.
Regards,
Pankaj A Bhalerao.
Similar Messages
-
How to Delete all the Assets in a Company Code
HI GURUS n EXPERTS,
The asset module is configured in my system but we were not using it. Now my company want to use it. During the analysis, I found:
The assets are created but for maximum assets Value is Zero. But there is some assets have some value.
Now, When we try to delete these assets with AS06. We are able to delete the asset with zero values. But when we try to delete the assets which have some value, system gives a message:
Deleting is not possible. The asset already has values.
Is there any way to delete such type assets. Or can we use Reset Company Code Transaction - OABL.
Please suggest. Early response will highly appreciated.
DSCHi,
Transactions OABL for data deletion are very critical transactions to use. Please read carefully the IMG documentation.
For a start the reset of a company code is only allowed when in "test status".
I'm sorry per forum I an give you no recommendation to reset the cocd (OABL) and Reset Posted Depreciation (OAGL)
The impact have to be check on the spot.
regards Bernhard -
How can I determine the feeder class for a WebDynpro component in SRM 7.0?
Hi experts.
I am trying to figure out how to add some columns to the list of contract items for this WebDynpro application/view:
Applikation: /SAPSRM/WDA_L_FPM_OIF
Web Dynpro-komponent: /SAPSRM/WDC_CTR_DOTC_IT
Window: IV_L_FPC_CA_TREE
View: V_CTR_DODC_ITEMS
Configuration-ID: /SAPSRM/WDCC_FPM_CTR_DOTC_ITM
All the documentation I can find regarding the FPM says to change the feeder class, but nowhere I have seen do they explain how to determine the feeder class of an existing component/view.
I am hoping for your help!
Thanks!
Best regards
Per Hjorth ChristiansenThe term "feeder class" normally refers to the POWL search, not the actual document detail screen. You could just add one more column by enhancing the webdynpro view.
-
hello my iphone 3gs just been stolen how can i block the iphone and how could i track it i don't know for sure if i have find my iphone? please help i got many accounts on it and i don't have a passcode :((
It was never free for the 3GS.
It is if the initial sign-up is done on an iPhone 4, iPad or iPod touch 4th gen.
From http://support.apple.com/kb/HT4436:
After I sign up for Find My iPhone for free, can I use it on other iOS devices?
Yes, if your devices are running iOS 4.2. For example, you can sign up for Find My iPhone for free on your iPad and use the same account information to sign in to MobileMe on your iPhone 3GS and turn on Find My iPhone. -
Differentiating the asset class for group assets
Hi,
I want to create group assets in AS21. For creating group assets I want to create a seperate asset class. I could not find any option of differentiating the asset class for group assets in transaction OAOA (i.e., Define Asset Class)
How we can identify that an asset class can be used only for group assets and not for individual assets.<<Plagiarised from http://help.sap.com/saphelp_45b/helpdata/en/4f/71dfff448011d189f00000e81ddfac/content.htm>>
HI
A group asset is represented in the system by a separate master record. The structure of this master record corresponds to the structure of the normal asset master record. You can determine the structure of this master record using screen layout control, just as you do for normal master records. Just the same as a normal asset, a group asset can have any number of sub-numbers. In this way it is possible, for example, to collect all the acquisitions for one year in a single sub-number master record at the level of the group asset.
There is a separate master data transaction for creating group assets (Asset ® Create ® Group asset). This transaction corresponds to the transaction for creating normal assets. However, there are certain special considerations to keep in mind for master data maintenance of group assets:
Group assets can only be deleted when all the assets belonging to them have been marked for deletion.
Group assets can only manage depreciation areas that have been specially marked. You mark them using an indicator in the company code specific specifications for the depreciation area (FI-AA Customizing: Specify depreciation areas for group assets).
Group assets have to be assigned to an asset class, just as normal assets do. You use an indicator in the asset class to specify that the class can be used only for group assets.
Assignment of an Asset to a Group Asset
You can assign an asset to a group asset by specific depreciation areas. For this purpose, there is a special field in the asset master record (in the detail display of each depreciation area). You enter the number of the group asset in this field. Once this entry is made, the system calculates and posts the depreciation for this depreciation area only at the level of the group asset. In this way, you can also assign one asset to different group assets in different depreciation areas.
Regards,
Amit SHinde
Acknowledge If satisfied
Edited by: Matt on Feb 17, 2012 9:34 AM -
How can I find the serial number for my stolen iPad that's associated with my apple ID ?
How can I find the serial number for my stolen iPad that's associated with my apple ID ?
If you registered it with Apple check your registered items at Your Support Profile for Registered Purchases. Also, see iOS- How to find the serial number, IMEI, MEID, CDN, and ICCID number.
What To Do If Your iDevice Is Lost Or Stolen
If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. What to do if your iOS device is lost or stolen
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
8. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices) -
How can I define the possible entries for "invoicing process" at fkkinv_ma?
At the transaction code fkkinv_ma, I fill in the fields "Date ID" and "Identification" but I have a problem with the field of "Invoicing Process". When I psh theF4 button, there comes no search help. What should I do? Should I define the possible entries first? If I should, how can I define the possible entries for "invoicing process"? How is the customization done?
Thanks in advance for the answers.You have to define them in the IMG
Financial Accounting (new)
Contract Account Recievable and Payable
Business Transactions
Invoicing
Invoice Types
You have to set up a number range, decide what type of Financial transactions should not be invoiced -- like Dunning Charges
then you have to have a developer create the form and form class of invoice. -
How Can i Block the Work Center Once is used in Maintainence Order
Dear Experts,
How Can i Block the Work Center Once is used in Maintainence Order in PM module.
In standard its not blocking the Work Center automatically. How this can be achieved.
Regards
Raghu
Edited by: raghu m on Apr 21, 2009 10:36 AMHi Muthukumar,
1. You can using the user exit or BADI to control this.
CONFPP01 PP order conf.: Determine customer specific default values
CONFPP02 PP order conf.: Customer specific input checks 1
CONFPP03 PP order conf.: Cust. specific check after op. selection
CONFPP04 PP order conf.: Customer specific input checks 2
CONFPP05 PP order conf.: Customer specific enhancements when saving
CONFPP06 PP Order Confirmations: Actual Data Transfer
CONFPP07 Single Screen Entry: Inclusion of User-Defined Subscreens
BADI
WORKORDER_CONFIRM
the above are the user exits that are available fro the CO11N tcode.
2. we have to take a help of the abaper to write coding fort his.
3. The user exit should be called for the
Work Center : YYYYY
then check the relevant Work Center Once is used in open Maintainence Order and if it has a entry if then give a error message else allow the CO11N to perform.
Regards,
Sankaran -
How can we change the valuation type for a material created.
How can we change the valuation type for a material created.
Note : All open orders are closed for this material.3
Please guideHi,
You can change valuation class, or you can set valuation category for your material master. If valuation category is set you can extend your material master and in this way creating records for different valuation types.
Please try to set the desired changes in your mmr (MM02) > save > SAP will give you error message > push 'Display error' button and you will see what conditions must be eliminated to carry out the change.
- you are not allowed to have open transactional data
- no stock in the current and previous period (using proper posting date in MB1A + 201 you can reduce your stock level to 0, and after that you can set it back by MB1A + 202)
- in case of valuation category setting batch archiving may be necessary
BR
Csaba -
Hi experts . how can we know the stock details for a perticular plant?
hi experts . how can we know the stock details for a perticular plant
check this code
REPORT YSG_MATSTK_REP LINE-SIZE 220
LINE-COUNT 50(5).
*& DATA DECLARATION *
TABLES: MARA, "GENERAL MASTER DATA
MARC, "PLANT DATA FOR MATERIAL
MARD, "STORAGE LOCATION DATA FOR MATERIAL
MBEW, "MATERIAL VALUATION
MVKE, "SALES DATA FOR MATERIAL
MAKT. "MATERIAL DESCRIPTION
DATA: BEGIN OF I_MARA OCCURS 0,
MATNR LIKE MARA-MATNR,"MATERIAL NUMBER
MBRSH LIKE MARA-MBRSH,"INDUSTRY SECTOR
MEINS LIKE MARA-MEINS,"BASE UNIT OF MEASURE
END OF I_MARA.
DATA: BEGIN OF I_MARC OCCURS 0,
MATNR LIKE MARC-MATNR,"MATERIAL NUMBER
WERKS LIKE MARC-WERKS,"PLANT
LVORM LIKE MARC-LVORM,"FLAG MATERIAL FOR DELETION AT PLANT
"LEVEL
PSTAT LIKE MARC-PSTAT,"MAINTENANCE STATUS
DISPO LIKE MARC-DISPO,"MRP CONTROLLER
END OF I_MARC.
DATA: BEGIN OF I_MAKT OCCURS 0,
MATNR LIKE MAKT-MATNR,"MATERIAL NUMBER
MAKTX LIKE MAKT-MAKTX,"MATERIAL DESCRIPTION
END OF I_MAKT.
DATA: BEGIN OF I_MVKE OCCURS 0,
MATNR LIKE MVKE-MATNR,"MATERIAL NUMBER
VKORG LIKE MVKE-VKORG,"SALES ORGANIZATION
VTWEG LIKE MVKE-VTWEG,"DISTRIBUTION CHANNEL
END OF I_MVKE.
DATA: BEGIN OF I_MARD OCCURS 0,
MATNR LIKE MARD-MATNR,"MATERIAL NUMBER
LGORT LIKE MARD-LGORT,"STORAGE LOCATION
LABST LIKE MARD-LABST,"VALUATED STOCK WITH UNRESTRICTED USE
END OF I_MARD.
DATA: BEGIN OF I_OUT OCCURS 0,
MATNR LIKE MARC-MATNR,
WERKS LIKE MARC-WERKS,
LVORM LIKE MARC-LVORM,
PSTAT LIKE MARC-PSTAT,
DISPO LIKE MARC-DISPO,
MBRSH LIKE MARA-MBRSH,
MEINS LIKE MARA-MEINS,
MAKTX LIKE MAKT-MAKTX,
VKORG LIKE MVKE-VKORG,
VTWEG LIKE MVKE-VTWEG,
LGORT LIKE MARD-LGORT,
LABST LIKE MARD-LABST,
END OF I_OUT.
DATA : TOT TYPE I. " TOT - TOTAL TO PRINT STOCK
*& S E L E C T I O N - S C R E E N *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-100.
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR OBLIGATORY.
PARAMETERS: P_WERKS LIKE MARC-WERKS OBLIGATORY.
SELECT-OPTIONS: S_LGORT FOR MARD-LGORT,
S_DISPO FOR MARC-DISPO.
SELECTION-SCREEN END OF BLOCK B1.
*& I N I T I A L I Z A T I O N *
INITIALIZATION.
S_MATNR-SIGN = 'I'.
S_MATNR-OPTION = 'EQ'.
S_MATNR-LOW = 'M-14'.
S_MATNR-HIGH = 'M-18'.
P_WERKS = '3000'.
S_LGORT-SIGN = 'I'.
S_LGORT-OPTION = 'EQ'.
S_LGORT-LOW = '0001'.
S_LGORT-HIGH = '0004'.
S_DISPO-SIGN = 'I'.
S_DISPO-OPTION = 'EQ'.
S_DISPO-LOW = '001'.
S_DISPO-HIGH = '002'.
APPEND S_DISPO.
APPEND S_LGORT.
APPEND S_MATNR.
CLEAR S_DISPO.
CLEAR S_LGORT.
CLEAR S_MATNR.
*& S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
SELECT MATNR WERKS LVORM DISPO FROM MARC
INTO CORRESPONDING FIELDS OF TABLE I_MARC
WHERE WERKS EQ P_WERKS
AND MATNR IN S_MATNR
AND DISPO IN S_DISPO
AND WERKS = P_WERKS.
IF I_MARC[] IS INITIAL.
WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MARC'.
EXIT.
ENDIF.
SELECT MATNR LGORT LABST FROM MARD INTO TABLE I_MARD
FOR ALL ENTRIES IN I_MARC
WHERE MATNR = I_MARC-MATNR
AND WERKS EQ P_WERKS
AND LGORT IN S_LGORT.
IF I_MARD[] IS INITIAL.
WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MARD'.
EXIT.
ENDIF.
SELECT MATNR VKORG VTWEG FROM MVKE INTO TABLE I_MVKE
FOR ALL ENTRIES IN I_MARC
WHERE MATNR = I_MARC-MATNR.
IF I_MVKE[] IS INITIAL.
WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MVKE'.
EXIT.
ENDIF.
LOOP AT I_MARC.
MOVE-CORRESPONDING I_MARC TO I_OUT.
CLEAR MARC.
SELECT SINGLE MATNR MBRSH MEINS FROM MARA
INTO CORRESPONDING FIELDS OF MARA
WHERE MATNR = I_OUT-MATNR.
IF SY-SUBRC = 0.
MOVE: MARA-MBRSH TO I_OUT-MBRSH,
MARA-MEINS TO I_OUT-MEINS.
ELSE.
CONTINUE.
ENDIF.
SELECT SINGLE MATNR MAKTX FROM MAKT
INTO CORRESPONDING FIELDS OF MAKT
WHERE MATNR = I_OUT-MATNR.
IF SY-SUBRC = 0.
MOVE: MAKT-MAKTX TO I_OUT-MAKTX.
ELSE.
CONTINUE.
ENDIF.
LOOP AT I_MARD WHERE MATNR = I_MARC-MATNR.
MOVE: I_MARD-LABST TO I_OUT-LABST,
I_MARD-LGORT TO I_OUT-LGORT.
APPEND I_OUT.
ENDLOOP.
LOOP AT I_MVKE WHERE MATNR = I_MARC-MATNR.
MOVE: I_MVKE-VKORG TO I_OUT-VKORG,
I_MVKE-VTWEG TO I_OUT-VTWEG.
APPEND I_OUT.
ENDLOOP.
CLEAR I_OUT.
ENDLOOP.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = 'C:\matstk.TXT'
FILETYPE = 'ASC'
TABLES
DATA_TAB = I_OUT.
*& T O P - O F - P A G E *
TOP-OF-PAGE.
WRITE:/ 'DATE:' ,SY-DATUM.
*& E N D - O F - P A G E *
END-OF-PAGE.
WRITE: / SY-ULINE,
/100 'PAGNO: ',SY-PAGNO,
SY-ULINE.
*& E N D -- O F -- S E L E C T I O N *
END-OF-SELECTION.
LOOP AT I_OUT.
AT FIRST.
WRITE :/ 'MATERIAL EXTRACTION REPORT',
SY-ULINE.
ENDAT.
WRITE:/ SY-VLINE,
I_OUT-MATNR,SY-VLINE,
I_OUT-MEINS,SY-VLINE,
I_OUT-WERKS,SY-VLINE,
I_OUT-LVORM,SY-VLINE,
I_OUT-PSTAT,SY-VLINE,
I_OUT-DISPO,SY-VLINE,
I_OUT-MBRSH,SY-VLINE,
I_OUT-MAKTX,SY-VLINE,
I_OUT-VKORG,SY-VLINE,
I_OUT-VTWEG,SY-VLINE,
I_OUT-LGORT,SY-VLINE,
I_OUT-LABST,SY-VLINE.
TOT = TOT + I_OUT-LABST.
AT NEW MATNR.
WRITE : 'NEW RECORD',
SY-VLINE.
ENDAT.
AT END OF LABST.
WRITE : 'STOCK = ',
TOT,
SY-VLINE,
SY-ULINE.
ENDAT.
AT LAST.
FORMAT COLOR 7 INTENSIFIED OFF.
WRITE : /159 'TOTAL STOCK = ',
TOT.
ENDAT.
ENDLOOP.
WRITE : /159 'TOTAL STOCK = ',
TOT.
regards,
srinivas
<b>*reward for useful answers*</b> -
How can i see the Asset purchase order & GR after settlement
Hello Gurus,
Would you please tell me how can i check the Asset Purchase order, which is settled (WBS Element)? How can i see the GR document for the specific asset? & if i treat as a expeneses toward the project where i get the GR/ PO in asset explorer?
Warm Regards,
Dhananjay Rahane.Dear,
Dhanajay.
Purchase order related to asset you can see in Asset Master itself. Go to AS03 - Environment ( Menu bar ) - Click on Purchase Order. Here you will have all the relevant PO's relating to asset.
GR you can see in PO at a Purchase Order history. The data relating to asset you can see in left hand side navigation in AW01N Asset Explorer. Like as Vendor, PO's, etc.
WBS in PO you can see in Account Assignment Tab if your PO is created with N. ( Network PO ). WBS linked to Network you can see in CJ20N ( Project Builder ).
WBS Actual values can see in report CJI3 Actual Cost & Revenues.
I hope this helps you to solve your issue. If you have any doubts feel free to share.
Regards,
Pankaj A Bhalerao. -
How can we Transfer The Assets From Legacy to SAP
Hi Experts,
how can we transfer the assets from legacy system to sap when business in production ,what is the procedure for transfer the assets.
Regards,
HarishHello Harish,
Please kindly refer to SAP Libray for more information about
intercompany transfer.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/4f/71e18a448011d189f00000
e81ddfac/frameset.htm
-> Asset Accounting (FI-AA)
->Other transaction during Life of an Asset
->Intracompany and intercompany Asset Transfer
->Intercompany Asset Transfer(Between company codes)
Please also refer to following notes and SAP library for further.
information.
310346 ABT1 Defining transfer variant gross
327088 Definition of the delivered transfer variants
http://help.sap.com/erp2005_ehp_04/helpdata/EN/17/1d3c3934f18443e1000000
0a114084/frameset.htm
-> Asset Accounting (FI-AA)
->Other transaction during Life of an Asset
->Intracompany and intercompany Asset Transfer
->Intercompany Asset Transfer(Between company codes)
->Automatic Intracompany Asset Transfer
->Transfer Variant
I hope this helps,
regards
Ray -
How can we upload the asset transactionn data
how can we upload the asset transactionn data pls let me know
There are several ways to upload asset transaction data,
<b>- Automatic legacy data transfer using batch input
- Automatic legacy data transfer using direct input
- Automatic legacy data transfer using BAPI
- Manual legacy data transfer transaction
- Legacy data transfer using Microsoft Excel</b>
You may reference to SAP help by the following link for details.
http://help.sap.com/saphelp_47x200/helpdata/en/01/dfd83705c0c931e10000009b38f842/frameset.htm -
Hi, We are a physiotherapy practice trying to use i-cal as a clinic diary system for 15 therapists. We need to block out availability of therapists but cant do this? How can you block someones diary out for specific times on i-cal? Any help please..
iCal is designed for personal use, and isn't really meant to handle this sort of situation.
The best suggestion I can offer, though it's a trifle untidy, is: create a calendar for each therapist, giving each a different colour. Enter the availability for each therapist - if it's on a weekly basis you can make them repeating events. Then add the individual appointments, which will show alongside in the daily view. In this example, the 'purple' therapist is available from 1030 to 1700 and has appointments at 1200 and 1500.
If you have more than a few therapists available at any one time it's liable to look a bit messy, but it's the best I can think of at the moment. -
How can I change the phone number for messaging and FaceTime?
How can I change the phone number for messaging and FaceTime?
Unable to make or receive FaceTime calls after April 16, 2014
http://support.apple.com/kb/TS5419
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Text on the iPad
http://ipad.about.com/od/ipad_tricks/a/How-To-Text-On-The-Ipad.htm
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom
Maybe you are looking for
-
My pc can not detect my time machine formatted external hd
Help! I purchased a new western digital external hard drive(320gb)to use with both my pc and mac. when i first attached to usb hub on my macbook pro, I answered "yes" to the question if I wanted to use the drive as time machine backup..it said that a
-
Don't understand how to enable OpenGL?
I just installed Photoshop CS4 around a week ago and as many have already said it feels pretty sluggish compared to the CS2 that I upgraded from. I get the message "photoshop has encountered a problem with the display driver, and has temporarily disa
-
Reporting a problem from my bill just gets me sent around in circles. This has happened before last month, and seems to be linked with the upgrade to iOS 6.0.1. as problems started immediately after the upgrade. My subscription just seems to lock its
-
An HTML DB application over table with CDM RuleFrame
Hi guys, I have an Oracle Forms application we built using the CDM RuleFrame framework available with Headstart (an offering from Oracle Consulting). This framework allows us to validate all our business rules in the database using PL/SQL packages an
-
FaceTime says connecting but doesn't connect.
when ever i try to FaceTime (on phone and laptop) it says connecting but then doesn't actually connect. I've turned FT on and off but nothing works, how do i resolve this?