How can we build CQ authoring using backbone.js framework

How can we use backbone.js and build CQ page and then author the content for such page? Backbone.js framework is a typical framework that includes all the HTML in javascript and I am not sure how we can create CQ pages with authoring features in it. Any pointers would be much appreciated.
Thanks
Murali

Thank you, that works for me too!
At first I was worried because, when I ran configure it said:
checking build system type... i386-apple-darwin9.3.0
checking host system type... i386-apple-darwin9.3.0
checking target system type... i386-apple-darwin9.3.0
But I went ahead and ran make anyway, and here's what I ended up with:
apache-2.0/mod_jk.so: Mach-O 64-bit bundle x86_64
which I could install and test. It even works!
Where did you find this information? I did a lot of digging too, but I must have been digging in the wrong places. I always like to go back to the source and see what else I can learn. Maybe then I can take another run at building a universal binary.

Similar Messages

  • How can I build a LabView application that uses the 2012 runtime, on a development system with LabView 2013 or 2014 installed?

    I need to build a LabView application .exe to run with the 2012 Runtime, for legacy support. I currently have LabView 2013 installed on my development system, and have 2014 available. How can I build an application that uses the 2012 runtime on this development system? Do I have to downgrade to 2012? Thank you.

    We have existing customers that have installed our application that was originally built with 2012 (provided by a contractor that is no longer available).  Due to IT regulations, it is far easier to update these customers by simply replacing the .exe file, than creating an install that their IT department must run.
    If I have to downgrade to LabView 2012, where can I get the installation for this?

  • How can you build time series measures in OBIEE without using TODATE AGO fu

    How can you build time series measures in OBIEE without using TODATE and AGO function?
    Please provide steps to build time series
    measures in OBIEE without using TODATE and
    AGO function. Dashboard results not storing
    in cache when using TODATE and AGO functions.
    eventhough its cached users queries not
    hitting cache because queries doesn't match
    exact date time when using TODATE and AGO
    functions. so I want to build queries using
    sysdate and some simple calculations. Please
    send your inputs/ideas for my questions..
    Thanks in Advance

    This can be using Msum function in answers. Use the following formula, here dollars is my metric. Change the formula based on your metric.
    Msum("Sales Measures".Dollars ,2) - "Sales Measures".Dollars
    the report will be cached and better performed compared with time series. check ti
    - Madan Thota

  • How can i build RPMs file for my own Java Application?

    How can i build RPMs file for my own Java Application?....I have my own directory that contains all Java Source files and some files that my Application required....I want to build RPMs file like a install File to Linux System, Now my OS is Linux Fedora core 1.....How can i do this?

    I think that in order to create a RPM, you'd need to
    use some C.Nope - the RPM is all about packaging and the "magic" x.spec file. You can have anything you want in the RPM, but you have to use RPM tools to build the .rpm file. One of the features is that you can also indicate (via "install" scripts) modifications to other files or the filesystem to support the installation of whatever's in the RPM.

  • How can i build a java parser/interpreter

    How can i build a java parser/interpreter
    i know java offers a tokenizer, how can i use it for build a parser or interpreter that recognize tags like this:
    <query db="db1" select="row1, row2">
    and then perform some actions

    how can i use it for build a parser or interpreter that recognize tags like this:A compiler design class would help understand the issues involved.
    Or as suggested if you are merely trying to parse XML then there are variety of existing solutions.
    Of if not XML and you already understand the principles of compiler design (formally or perhaps with experience with lexx/yacc) then you could use JavaCC
    http://www.webgain.com/products/java_cc/

  • How can I check serial number using icloud

    how can I check serial number using icloud?

    If you are talking about an iPhone and you simply tap on settings/general/about
    Both IMEI and Serial numbers are there to see.
    You can use the *#06# short code on the phone keyboard to see IMEI as well
    Or connect your iphone to iTunes on a PC/Mac
    Click on the device in side bar and summary button at top left of browser window
    In the top panel you have :-
    Name of the device
    Capasity
    Build Version/Software version - Mouse click on it to change which is displayed
    Serial Number/UDID Identifyer - Mouse click on it to change which is displayed
    Phone number /IMEI -Mouse click on it to change which is displayed
    Its very easy to see both numbers if you actually have the device.

  • How can i build a manchester coding in labview signal processing?

    how can i build a manchester coding in labview signal processing?
    mean to say that how can i digitize my audio input.i waqnt to convert my audio input into manchester coded data format!!!
    kindly post related VIs
    regards
    Solved!
    Go to Solution.

    idma-
    Check out the LabVIEW FPGA example http://zone.ni.com/devzone/cda/epd/p/id/6126
    Generate Manchester Signal
    Basic example showing generation of a Manchester encoded data stream. The data to be sent is generated in one loop and passed to a FPGA FIFO. The subVI which generates the Manchester data stream reads the data bytes form the FIFO and passes them to the digital output. The subVI prepends a simple header to each data packet which allows a reader (see next example) to synchronize and acquire/parse the data. The header consists of a thee half bit pulse followed by a one half bit pulse. The three half bit pulse is not a valid component of regular Manchester encoding and can therefore be differentiated from the rest of the protocol. In addition it can be used by the receiver to to easily measure the bit rate of the protocol. By dividing the length of the three half bit pulse in half (3/4 of a bit), the receiver has a measure to differentiate between full and half bit pulses in the rest of the protocol.
    Generate and Read Manchester Signal
    An extension of the previous example which adds a Manchester receiver subVI. You must physically wire the digital output channel to your input channel to loop back the data outside the I/O connector of your FPGA R series card or C series module. The Manchester receiver subVI is expecting the data packet to be prepended by a header as explained in the previous section.
    I will see if the is a more precise example but this should help
    Sam S
    Applications Engineer
    National Instruments

  • How can i change my 'authorized computers'?

    my iTunes says i have 4 authorized computers with one left, but i only have 1 computer ( tho it now has a new HD so maybe iTunes thinks its #2. but that still leaves 2 mysterious authorized computers)  how can i update the authorized computers or at least see WHICH ones they are??

    You can deauthorize all the computers and then authorize only the ones you have or use. See iTunes Store: About authorization and deauthorization, http://support.apple.com/kb/HT1420

  • How can my wife and I use our two iTunes account on one iPad

    How can my wife and I use our two iTunes accounts on one IPad

    Unfortunately it will be difficult. iPads are personal devices like phones and done have credentials. You can of course log out of and into the app store to download purchased apps but the iPad will then have all the apps of both your wife and you (though you could put these into folders I guess).
    /H

  • I have two Apple ID, how can I delete one and use the email address associates to the main one?

    I have two Apple ID, how can I delete one and use the email address associates to the main one?

    If you abandon one of the Apple IDs you will also basically be abandoning any content that you have acquired with that Apple ID. Content can only be updated and re-downloaded with the Apple ID that was used to buy it. Apple will not combine the content of Apple IDs and Apple will not transfer the content from one Apple ID to another Apple ID.

  • I have a company Ipad that belonged to a deceased employee. no access to his icloud or appleID. how can I restore it for use with a new apple ID

    I have a company Ipad that belonged to a deceased employee. no access to his icloud or appleID. how can I restore it for use with a new apple ID?
    The apple ID was his personal account and can no longer gain access. Im sure I can get purchase recipts from the accounting department if needed. I tried to put the Ipad in restore mode and used itunes to "recover" the ipad but it still wont let me in because he registered the device with the "lost iphone" feature or whatever that is.

    Activation Lock in iOS 7  >  http://support.apple.com/kb/HT5818
    The Apple ID and Password that was Originally used to Activate the iDevice is required
    If you do not have that information you will not be able to use the Device.

  • HT1539 How can a digital copy be used in a household with multiple apple ids, synced on the same computer?

    How can a digital copy be used in a household with multiple apple ids, synced on the same computer?  I want to put a digital copy on my device, and on my wife's device.
    Please help.

    you're welcome.
    actually, unless you take an extra step, the first opened swf will close.  if you want the 2nd to close, the initial receiving lc will send a message to sender that causes the sender to close.

  • How can I turn my Mac using iTunes into an alarm clock?

    Here's my question: How can I turn my Mac, using iTunes, into an alarm clock?
    I want to be able to put my Mac to sleep but have it set up so that when it wakes up at the predetermined time iTunes will open and start playing the music I've selected....
    A "musical alarm clock"...
    A friend suggested using the Energy Saver option in Sys. Preferences to wake the computer at the right time. He said that then I could use iCal to start iTunes. I would then have to use an Apple Script to get iTunes to play the song I want.
    But is there a SIMPLER way to do this? Are there any programs out there that do this already??
    Thanks for any help....

    I recently got a copy of AlarmClock Pro from MacWorld UK. It is shareware, I think it is (USD?)19. I haven't had a chance to try it out much, but it does look quite good. I have an older version. The latest version looks even better.
    I'm sure there's plenty of freeware apps out there. You might also want to try looking here for an applescript here Doug's AppleScripts for iTunes
    p53

  • How can I update my app using my own ac?

    can I know if I can update my app from the other ac ?cause when I downloaded the app I used my friend ID  but now I can't contact him .so how can I update the app using my own ac?

    You can't, all content is tied to the account that bought/downloaded it, so only that account will be able to download updates to its apps.

  • How can I remove a flag using a rule in Mail.app?

    I'm using Mail Act-On to flag messages that are important. I also have got a smart mailbox that displays only those messages that are flagged, this is my "To Do" mailbox.
    Once I've read and answered the message I want to remove the flag, preferrably via a rule using Mail Act-On as well. However in the rules dialog in the Mail.app preferences there's only the option to set a flag, not to remove one.
    Can anyone help: how can I remove a flag using a rule?? Maybe via Applescript as the last resort?
    Thanks for any advice Jan

    Hi Jan
    I haven't gotten around to put unread and unflag into Mail-ActOn but MailTags has the functionality. MailTags also allows you to mark a message unread via act-On rule.
    It is interesting to note that apple doesn't include unflag and unread as the rules were originally intended to apply only to new messages (of which none should be read or flagged) with that logic, there would be no need for unread, unflagg.
    @David: The reason to do it via Act-On rule would be to set up a sequence of events, one of which is to unflag, others may be to set keywords, move messages, set colors etc.
    Scott

Maybe you are looking for