How can we captured Excise Duty Payable at the time of billing

Hi,
i have created billing at that time i did not take excise duty payable and i have made the document and my question is and how can we captured excise payable with out reverse or manual JV,and i heard that we can do through excise table can any body tell me the procedure
Regards,
Harish

Dear,
have you created Excise Invoice? If not then you can create through J1IIN.
Br,Vivek

Similar Messages

I have a new Macbook pro and can't recall the password I used with my Time capsule - How can I (ideally) retrieve or possibly change the time capsule password?

I have a new Macbook pro and can't recall the password I used with my Time capsule - How can I (ideally) retrieve or possibly change the time capsule password?

Remember security on a TC is an illusion.
Simply press the reset button for 1-2 sec.. you must not do too long .. it will then hard reset.. but soft reset will revert all passwords to default for 5min. ie TC password is now public.
Remember this the next time because anybody at all can change your passwords.
Once into the TC you can then open the view passwords if you wanted any weaker security. Click and open the TC.. and click on edit.. then go to the top menu..
Voila .. all your passwords in plain sight to any Tom Dick and Fred.

Excise JV - How to post to Excise Duty Payable

Hi
In my scenario, we have charged less amount to customer at the time of sales.
For ex: Sales order was prepared for Rs.10000 and relevant excise duty was (@ 10% was charged). We did delivery and billing. We issued excise invoice as per Rs.10000 and relevant excise duty on it.
But actual basic price is 10100. We will charge Rs.100 and we have to charge relevant excise duty on it. However there will be no material movement.
1st i posted Debit note to customer with FB70 with following entry:
Customer A/c.. Dr 110 (100 + 10% excise)
   To Sales A/c 100
   To Excise Paid A/c 10
Then i went to J1IH and gave FB70 document reference. Following entry was posted
Excise Paid A/c... Dr 10 (This amount i gave manually which is OK)
    To Excise Duty Receivable 10
Now my doubts:
1. How to credit Excise Duty Payable in J1IH. Which transaction type i need to check for it (DIEX or OTH, etc)
2. How should i take print of excise invoice (for above J1IH). My material number should also get printed on invoice. But i am not specifying any material in J1IH
3. 2. Can i create separate transaction type and then use it to J1IH. If yes then how to create and assign

Hi
In my scenario, we have charged less amount to customer at the time of sales.
For ex: Sales order was prepared for Rs.10000 and relevant excise duty was (@ 10% was charged). We did delivery and billing. We issued excise invoice as per Rs.10000 and relevant excise duty on it.
But actual basic price is 10100. We will charge Rs.100 and we have to charge relevant excise duty on it. However there will be no material movement.
1st i posted Debit note to customer with FB70 with following entry:
Customer A/c.. Dr 110 (100 + 10% excise)
   To Sales A/c 100
   To Excise Paid A/c 10
Then i went to J1IH and gave FB70 document reference. Following entry was posted
Excise Paid A/c... Dr 10 (This amount i gave manually which is OK)
    To Excise Duty Receivable 10
Now my doubts:
1. How to credit Excise Duty Payable in J1IH. Which transaction type i need to check for it (DIEX or OTH, etc)
2. How should i take print of excise invoice (for above J1IH). My material number should also get printed on invoice. But i am not specifying any material in J1IH
3. 2. Can i create separate transaction type and then use it to J1IH. If yes then how to create and assign

How to re-capture excise duty which is issue aginst subcontract PO

Hi,
I have made a Subcontract PO with item category as L, with full payment of excise duty in subcontract there are two BOM component, then i have done MB1B ref. to MB1B document number excise invoice created with J1IS for the raw materials which we have supplied, as in case of subcontract with full payment of excise duty there is no need to create subcontract challn now I have made the GR for finish product, now how to capture the excise duty back when I ma trying to J1IEX capture excise inovice ref. to GR or PO it is showing me only finish material in the J1IEX not the RM, as the excise duty is on the RM only not on Finish product in vendor PO tax is as labour chagres only.
regards,
zafar

Hi
I wan to put some basic things here
1) when you send material to vendor with excise duty ,then vendor will take credit of that material ( your child material)
2) After processing your child material vendor will send final material only not child material
so how you will capture incoming excise for component which already consume by vendor?
second thing if you received excise invoice from your vendor for final product then check that invoice you will get only Final material name and qty, there not child material with excise if am not wrong
Regards
kailas Ugale

How to make repricing for specific conditions at the time of billing?

Hello
I'm SD Pricing person. Let me ask here experts below my concern.
In EU countries, there is recycling fee in sales of electronics or Note PC with batteries....to keep our earth clean.
So when customers buy such products, they have to pay more as recycling fee including invoice amount.
My question is... we want to make repricing for recycling conditions when the billing is created.
Based on our configuration, recycling condition is not defined as a kind of tax condition.
So this value is just copied from sales order.
(pricing type in copy control is 'G' which means repricing for tax condition.)
In this situation, we want to make repricing for those conditions during operating system.
Is there any easy way to cover this?
As I think, this is not easy because the system is already operated.
To change condition attribution is really risky. If we dare do, we have to migrate all open orders.
So I want to put this way to the end of my choice.
For this requirement,
1. We have to change condition class or category or calculation type in order to be repriced based on pricing type 'G'.
(ex. Set the condition category as 'I' inter-billing or 'L' always repricing.)
But transaction data are created now and all open orders will be affected.
2. To create new conditions are not easy because these conditions are mapped to the CO-PA value field and the values are posted in FI doc.
3. To change pricing type in copy control is almost impossible because of the impact.
What can I do this in this situation?
What I want to do is just to make repricing for specific conditions at the time of billing in case that pricing type of copy control is 'G'.
Thank you in advance.

Let me ask agagin to all experts.
I want to make A condition to be repriced at the time of billing.
For this, I have to set condition category as 'L' (Generally new when copying).
But I do not want to do in that way becauuse I am maintaining big operated system now.
In addition, though I migrate open orders after changing config. as 'L', it is almost impossible for use to migrate because we have more than a thound open orders per a DAY as Globalized system.
That is why I am asking.
Simply I can create new condition but as I mentioned, there are various recycling fee so we already created about 10 conditions. And this recycling conditions are linked to REA package of SAP. So creating another 10 more conditions can not be a way for us.
At last, what I want is not to be shown this condition only in billing doc.
'A' condition should be displayed in both Sales order and Billing doc.
And simultaneously, when the billing is created and if user changed 'A' condition master, then new value which is different from sales order have to be reflected in billing doc.
Thank you in advance.

In iMovie '09, how can I capture a still picture from the video?

I have a movie that i got into iMove and I did edit it down and make a nice video from it I uploaded to YouTube. I want to know if there is any easy way to get stills from the video. when I run my cursor over the movie and get it on a person that I want to make into a still photograph is there a way to get that single piece out?
If I locate the part of the film I want as a still then try and do a screen capture, when i move the cursor to do the capture the pic in the movie changes as I move the cursor. (hope i'm making sense).
So is there a way to grab a single frame?
Susan

Two ways to get a still:
1) In project, move cursor to the frame. Right-click/add freeze frame. The Freeze frame is placed right behind the current clip in the project.
2) Select a frame in an Event. Right-click/Add still frame to project. The still is added to the project at the end.
(after doing either 1 or 2, continue with step 3)
3) Right-click on the still frame in your project. Select "Reveal in Finder". Drag the JPEG file that you see and drop it on the iPhoto icon in the Dock.
Hint: You can create a new project just for the stills. This way you will not clutter up an existing project.

How can I safe my data back from the Time capsule to iphone and macbook?

Hi,
last weekend we were robbed while being on vacation and iphones and macbook air got stolen. Good thing was that at home we had a time capsule and our normal macbook. As soon as we get the new iphones and the new airbook we want to get our itunes and apps and datas back to the iphones and airbook ... can somebody tell us how to re-safe or back-safe stuff from the time capsule back to the equipment?
Thank you ... I feel so "naked" without my phone :-(
Virtualkate

Sorry about your loss. Follow the directions here to use Time Capsule to restore your new Air to the state your old Air was in when stolen. When you first connect your new phones, you'll be given the option of restoring from the backup of your old phones or setting up as new. Restore from your previous backups, followed by syncing your content back to your phones. You should be good to go. Maintaining current backups makes this a piece of cake.
http://support.apple.com/kb/HT1177

How can I stop my browser crashing all the time?

My browser shuts down frequently for some unknown reason. Once it crashes at a particular website, or place on a website, I can almost never access that point again, the browser will close every time I try to go there.
I've been using Firefox, but I've tried other browsers, and it happens with all of them. I was getting the message box, "Browser closed unexpectedly", with the option to restore the session or start a new one. I had to download an upgrade, to the newest Firefox, in order to use Turbotax. Now the message is "We're sorry, Firefox crashed unexpectedly", with options to start over or restore session.
If I restore the session, it just crashes again if I try to return to the point I was attempting to access.
There was another person who posted about this same problem, and was advised to use the Disk Utility to repair the disk. I followed the directions, did the disk repair, etc., but it's still closing unexpectedly. It doesn't seem to be happening as often, but I can't access Turbotax now. It closes every time, while I'm waiting for the site to create a secure connection.
I'm on dial-up, too. I don't know if that has anything to do with it. I hope not, as that's my only option at this time. I'm in an area that has frequent power outages, so I shut my machine down whenever I'm not using it. I have been caught by surprise a few times, and the power has gone off while I was using the computer. I don't know if that could have caused this problem to develop.
Anybody know why this happens, or more importantly, how I can fix it?

Thanks, but no, it doesn't help. That's basically trouble-shooting Safari. The problem is with my system, I'm not using Safari, though I've tried it. I tried Safari, Firefox, Opera, and Seamonkey, they all do the same thing, at exactly the same websites.
I know I need to update. I'm on dial-up and haven't been able to update. I don't have someplace or somebody I can go to to access via high-speed. There are no internet cafes around here. There are no Apple stores around here. You can't get an update disk from Apple, which seems really ridiculous to me, but if you don't have high speed access, they don't really seem to care about doing anything whatsoever to help you out.
I realize there are not a lot of us out in the sticks, but we do exist, there really are still places without all the bells and whistles.
Thanks anyway, I'm working on finding out how I might be able to score an update. If can get that, if it still boots me out, I'll re-post.
My thanks to all who responded. I appreciate your time.

How can I extend my wireless network with the Time Capsule?

I recently bought a Time Capsule and set it up, backed up all my data, etc. It is currently plugged in to my AT&T Uverse wireless router via a LAN CAT5e cable. I am wondering if it is possible to wirelessly extend my preexisting network with the Time Capsule so I can move it somewhere else in my house where it can still pick up the signal but extend it. And if possible, how so? Or does it ALWAYS have to be wired'connected to my router for the internet to work?
Thanks in advance.

I am wondering if it is possible to wirelessly extend my preexisting network with the Time Capsule so I can move it somewhere else in my house where it can still pick up the signal but extend it.
Sorry but no. Extending using only wireless would require that the Time Capsule connect to another Apple router that is producing the wireless network.
Another way of saying the same thing is that you must have two Apple routers to be able to extend the signal wirelessly.

Basic Excise Duty problem at the time of PO genration( Dealer).

Dear All,
We are implmentation ECC 6.0 version.We are facing a problem in basic excise duty.I am genrating PO for dealer at that time excise duty should be in amount,this amount maintain in purchasing condition.When we assign tax code with 0 % BED in po.BED could not copy from purchasing condition type.
I think there was a Alternative Key (354) use in TAXINN pricing procedure,but this could not work properly.This key was proper key or any other key use in prcing procdure.
Any one suggest for right conclusion.
Regards,
Abhijit Kulkarni

U r ? is not clear
Hear is the process for delear case
in Delear case u will have to maintain all the details as per raw material case
only diffence is in the % of bed ecess and secess put 0 instade of 16 2 and 1
at the time of po u know that u vendor will give u material at say 100 Rs increse of excise which u dont now and 4 % vat on it
So u r po will loke like 100 basic
bed 0
ecess0
scess 0
vat 4
total 104
now whe u do GR
u come to know u have 8 bed 1.6 ecess 0.8 sccess
at the time of gr in Excise tab value
put the excise base as 100-8-1.6-0.8 = 89.6
and in bed 8
ecess 1.6
secess0.8
and in header tab of excise in miscellaneous tab tick MRP indicator
save ur part one and 2 posted
then do the miro
on item line it will show 100 as amount change it to 89.6
click on calculate tax
and ur excate payment of rs 104 will be done to vendor
this the the correct process of Delear case
Hope this is help full
Reward if usefull

How can I retrieve files OR re-initialize the time machine...

After deleting a file on my time capsule, I can't retrive some older files. I see the multiple windows up to a certain date, the rest of the windows are black (and I can't access them). Is there a way to repair the time capsule, and if not, how can I re-initialize the disk and start from scratch with a new full backup? Thanks.

A deletion on the TC cannot be recovered without removing the disk and using a recovery utility.. even then if it is inside a sparsebundle I am not at all confident a recovery software can do anything about it.
Pondini in his FAQ which are required reading before you start playing around manually doing deletions in TM.. makes clear it is not wise..
Q12, 20 http://pondini.org/TM/FAQ.html
To erase and start again, use erase in the airport utility.

How can i print a monthly calendar without the times printing?

I am trying to print an itinerary of an upcoming trip in Ical. I do NOT want the times to afect either the sorting of events on a particular date or for the Time of day to printed on the calendar. When I invoke "all-day" Ical sorts alphabetically; when I invoke normal calendar settings, it inovkes times. All I want to do is provide the hotel, reservation code and activities but I do NOT want to see the time of these entries. Can I do this in Ical?

It seems like a simple solution must be at hand. There is an option in the iCal Preferences (General) panel--Show event times. With this command unchecked the screen view of the month view is free of the times of day, but when I print the month view the times of day are printed.

How can I turn off my subscription to The Times UK

Have managed to turn off my subscription to The Sunday Times but am still being charged for the Times. How do I turn off?

http://support.apple.com/kb/HT4098
If that doesn't help, you'll probably need to contact customer support for The Times.
Regards.

How can I maximize my wifi speed using the Time Capsule?

I do not feel that my wifi speed is as fast as it should be. I have a 2 TB Time Capsule and connect wirelessly with an Apple MacBook Air, an iPhone 5s, an iPad 4, and iPad mini. The online manual just tells how to do the initial setup but not how to tweak the settings. Any idea how I can check my settings?

There's little if anything to tweak. Your wireless speed will depend upon how many devices are using it at the same time since it is shared bandwidth. Wireless is also affected by what's between the device and the router like walls, ceilings, and other obstructions. If you have two devices connected at the same time one of which only supports 802.11a/b connections and one that supports and another that uses 802.11a/b/n (faster), then your network speed will drop down to the speed of the slowest device connected.
Just use it. There's little you can do unless you have defective hardware.

Every page I open is tiny, every time I open it, How can I make tham ALL bigger all the time

I installed FF4, and now the all the web pages I visit must be zoomed in, each and every time I visit them.
I reinstalled FF3.16, and now I've got the same problem with it. Man this really sucks, as before I could actually use this browser fairly easily.

The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
Try the Default FullZoom Level extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/2592/

How can we captured Excise Duty Payable at the time of billing

Similar Messages

Maybe you are looking for